/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel 545s Series SSDs Device Model: INTEL SSDSC2KW256G8 Serial Number: -- LU WWN Device Id: 5 5cd2e4 ... Firmware Version: LHF004C User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue May 23 01:31:50 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 15) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 10985 12 Power_Cycle_Count -O--CK 100 100 000 - 2906 170 Unknown_Attribute PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Unknown_Attribute PO--CK 086 086 005 - 949205401771 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2121 183 SATA_Downshift_Count -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 090 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Temperature_Case -O--CK 037 053 000 - 37 (Min/Max 9/53) 192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 2121 199 CRC_Error_Count -O--CK 100 100 000 - 92 225 Host_Writes_32MiB -O--CK 100 100 000 - 2091625 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 228 Workload_Minutes -O--CK 100 100 000 - 0 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 067 067 000 - 0 236 Unknown_Attribute -O--CK 067 067 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 2091625 242 Host_Reads_32MiB -O--CK 100 100 000 - 1880442 249 NAND_Writes_1GiB -O--CK 100 100 000 - 57836 252 Unknown_Attribute -O--CK 100 100 000 - 221 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 20% 10873 - # 2 Short offline Aborted by host 40% 10873 - # 3 Short offline Aborted by host 90% 10873 - # 4 Short offline Aborted by host 90% 10873 - # 5 Short offline Completed without error 00% 10873 - # 6 Short offline Aborted by host 00% 10867 - # 7 Short offline Aborted by host 40% 10867 - # 8 Short offline Aborted by host 90% 10867 - # 9 Short offline Aborted by host 90% 10867 - #10 Short offline Completed without error 00% 8087 - #11 Short offline Aborted by host 60% 7997 - #12 Short offline Aborted by host 70% 7997 - #13 Short offline Aborted by host 70% 7997 - #14 Short offline Completed without error 00% 7517 - #15 Short offline Completed without error 00% 7516 - #16 Short offline Completed without error 00% 7511 - #17 Short offline Completed without error 00% 6983 - #18 Short offline Completed without error 00% 6818 - #19 Short offline Completed without error 00% 6615 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Min/Max Temperature: 35/52 Celsius Lifetime Min/Max Temperature: 14/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (73) Index Estimated Time Temperature Celsius 74 2023-05-22 23:24 51 ******************************** 75 2023-05-22 23:25 52 ********************************* 76 2023-05-22 23:26 52 ********************************* 77 2023-05-22 23:27 52 ********************************* 78 2023-05-22 23:28 51 ******************************** 79 2023-05-22 23:29 52 ********************************* ... ..( 9 skipped). .. ********************************* 89 2023-05-22 23:39 52 ********************************* 90 2023-05-22 23:40 50 ******************************* 91 2023-05-22 23:41 49 ****************************** ... ..( 6 skipped). .. ****************************** 98 2023-05-22 23:48 49 ****************************** 99 2023-05-22 23:49 50 ******************************* ... ..( 2 skipped). .. ******************************* 102 2023-05-22 23:52 50 ******************************* 103 2023-05-22 23:53 35 **************** 104 2023-05-22 23:54 39 ******************** 105 2023-05-22 23:55 44 ************************* 106 2023-05-22 23:56 44 ************************* 107 2023-05-22 23:57 44 ************************* 108 2023-05-22 23:58 46 *************************** 109 2023-05-22 23:59 46 *************************** 110 2023-05-23 00:00 41 ********************** 111 2023-05-23 00:01 41 ********************** 112 2023-05-23 00:02 41 ********************** 113 2023-05-23 00:03 42 *********************** 114 2023-05-23 00:04 44 ************************* 115 2023-05-23 00:05 41 ********************** 116 2023-05-23 00:06 42 *********************** 117 2023-05-23 00:07 42 *********************** 118 2023-05-23 00:08 41 ********************** 119 2023-05-23 00:09 41 ********************** 120 2023-05-23 00:10 43 ************************ 121 2023-05-23 00:11 42 *********************** 122 2023-05-23 00:12 43 ************************ 123 2023-05-23 00:13 43 ************************ 124 2023-05-23 00:14 43 ************************ 125 2023-05-23 00:15 44 ************************* 126 2023-05-23 00:16 44 ************************* 127 2023-05-23 00:17 43 ************************ ... ..( 2 skipped). .. ************************ 2 2023-05-23 00:20 43 ************************ 3 2023-05-23 00:21 44 ************************* ... ..( 10 skipped). .. ************************* 14 2023-05-23 00:32 44 ************************* 15 2023-05-23 00:33 43 ************************ 16 2023-05-23 00:34 43 ************************ 17 2023-05-23 00:35 43 ************************ 18 2023-05-23 00:36 44 ************************* 19 2023-05-23 00:37 44 ************************* 20 2023-05-23 00:38 46 *************************** 21 2023-05-23 00:39 45 ************************** 22 2023-05-23 00:40 44 ************************* ... ..( 2 skipped). .. ************************* 25 2023-05-23 00:43 44 ************************* 26 2023-05-23 00:44 45 ************************** 27 2023-05-23 00:45 52 ********************************* 28 2023-05-23 00:46 45 ************************** 29 2023-05-23 00:47 45 ************************** 30 2023-05-23 00:48 45 ************************** 31 2023-05-23 00:49 46 *************************** 32 2023-05-23 00:50 45 ************************** 33 2023-05-23 00:51 46 *************************** 34 2023-05-23 00:52 45 ************************** 35 2023-05-23 00:53 46 *************************** 36 2023-05-23 00:54 47 **************************** 37 2023-05-23 00:55 48 ***************************** 38 2023-05-23 00:56 45 ************************** 39 2023-05-23 00:57 44 ************************* 40 2023-05-23 00:58 44 ************************* 41 2023-05-23 00:59 51 ******************************** 42 2023-05-23 01:00 44 ************************* 43 2023-05-23 01:01 43 ************************ 44 2023-05-23 01:02 43 ************************ 45 2023-05-23 01:03 43 ************************ 46 2023-05-23 01:04 44 ************************* ... ..( 4 skipped). .. ************************* 51 2023-05-23 01:09 44 ************************* 52 2023-05-23 01:10 43 ************************ 53 2023-05-23 01:11 43 ************************ 54 2023-05-23 01:12 43 ************************ 55 2023-05-23 01:13 44 ************************* ... ..( 3 skipped). .. ************************* 59 2023-05-23 01:17 44 ************************* 60 2023-05-23 01:18 49 ****************************** 61 2023-05-23 01:19 45 ************************** 62 2023-05-23 01:20 45 ************************** 63 2023-05-23 01:21 49 ****************************** 64 2023-05-23 01:22 49 ****************************** 65 2023-05-23 01:23 51 ******************************** 66 2023-05-23 01:24 52 ********************************* 67 2023-05-23 01:25 52 ********************************* 68 2023-05-23 01:26 46 *************************** 69 2023-05-23 01:27 46 *************************** 70 2023-05-23 01:28 44 ************************* 71 2023-05-23 01:29 45 ************************** 72 2023-05-23 01:30 46 *************************** 73 2023-05-23 01:31 51 ******************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2906 --- Lifetime Power-On Resets 0x01 0x010 4 10985 --- Power-on Hours 0x01 0x018 6 137076783427 --- Logical Sectors Written 0x01 0x020 6 1820535197 --- Number of Write Commands 0x01 0x028 6 123236709184 --- Logical Sectors Read 0x01 0x030 6 1541085602 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2121 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 46 --- Current Temperature 0x05 0x010 1 52 --- Average Short Term Temperature 0x05 0x018 1 37 --- Average Long Term Temperature 0x05 0x020 1 59 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 54 --- Highest Average Short Term Temperature 0x05 0x038 1 27 --- Lowest Average Short Term Temperature 0x05 0x040 1 37 --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 85 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 35399 --- Number of Hardware Resets 0x06 0x018 4 92 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 14 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0005 2 0 R_ERR response for non-data FIS 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYX-01Y7B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 23 01:31:50 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 166) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 178 171 021 - 4075 4 Start_Stop_Count -O--CK 097 097 000 - 3621 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 047 047 000 - 38872 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2352 192 Power-Off_Retract_Count -O--CK 198 198 000 - 2074 193 Load_Cycle_Count -O--CK 200 200 000 - 1552 194 Temperature_Celsius -O---K 104 094 000 - 43 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 5742 hours (239 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 68 13 83 5a 40 00 Error: UNC at LBA = 0x6813835a = 1746109274 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 30 00 00 07 11 6b 40 40 00 01:33:03.843 READ FPDMA QUEUED 61 00 20 00 30 00 00 07 11 6a 00 40 00 01:33:03.843 WRITE FPDMA QUEUED 60 00 20 00 28 00 00 07 11 6b 60 40 00 01:33:03.836 READ FPDMA QUEUED 61 00 20 00 28 00 00 07 11 6a 20 40 00 01:33:03.836 WRITE FPDMA QUEUED 60 00 20 00 20 00 00 07 11 6b 00 40 00 01:33:03.836 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 5742 hours (239 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 68 13 83 5a 40 00 Error: UNC at LBA = 0x6813835a = 1746109274 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 00 00 00 68 13 83 00 40 00 01:33:01.936 READ FPDMA QUEUED 60 01 00 00 00 00 00 68 13 82 00 40 00 01:33:01.934 READ FPDMA QUEUED 60 01 00 00 00 00 00 68 13 81 00 40 00 01:33:01.933 READ FPDMA QUEUED 60 01 00 00 00 00 00 68 13 80 00 40 00 01:33:01.931 READ FPDMA QUEUED 60 01 00 00 00 00 00 68 13 7f 00 40 00 01:33:01.930 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 35201 - # 2 Short offline Completed without error 00% 35177 - # 3 Short offline Completed without error 00% 35154 - # 4 Short offline Completed without error 00% 35130 - # 5 Short offline Completed without error 00% 35106 - # 6 Short offline Completed without error 00% 35082 - # 7 Short offline Completed without error 00% 35058 - # 8 Short offline Completed without error 00% 35033 - # 9 Short offline Completed without error 00% 35009 - #10 Short offline Completed without error 00% 34985 - #11 Short offline Completed without error 00% 34962 - #12 Short offline Completed without error 00% 34938 - #13 Short offline Completed without error 00% 34915 - #14 Short offline Completed without error 00% 34891 - #15 Short offline Completed without error 00% 34867 - #16 Short offline Completed without error 00% 34843 - #17 Extended offline Interrupted (host reset) 60% 25601 - #18 Short offline Completed without error 00% 4232 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 36/44 Celsius Lifetime Min/Max Temperature: 27/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (26) Index Estimated Time Temperature Celsius 27 2023-05-22 17:34 43 ************************ ... ..( 43 skipped). .. ************************ 71 2023-05-22 18:18 43 ************************ 72 2023-05-22 18:19 44 ************************* 73 2023-05-22 18:20 43 ************************ 74 2023-05-22 18:21 44 ************************* 75 2023-05-22 18:22 43 ************************ ... ..( 5 skipped). .. ************************ 81 2023-05-22 18:28 43 ************************ 82 2023-05-22 18:29 44 ************************* ... ..( 87 skipped). .. ************************* 170 2023-05-22 19:57 44 ************************* 171 2023-05-22 19:58 43 ************************ 172 2023-05-22 19:59 44 ************************* ... ..( 4 skipped). .. ************************* 177 2023-05-22 20:04 44 ************************* 178 2023-05-22 20:05 43 ************************ 179 2023-05-22 20:06 44 ************************* 180 2023-05-22 20:07 44 ************************* 181 2023-05-22 20:08 44 ************************* 182 2023-05-22 20:09 43 ************************ ... ..( 27 skipped). .. ************************ 210 2023-05-22 20:37 43 ************************ 211 2023-05-22 20:38 42 *********************** 212 2023-05-22 20:39 43 ************************ 213 2023-05-22 20:40 42 *********************** 214 2023-05-22 20:41 43 ************************ 215 2023-05-22 20:42 42 *********************** 216 2023-05-22 20:43 43 ************************ 217 2023-05-22 20:44 42 *********************** ... ..( 2 skipped). .. *********************** 220 2023-05-22 20:47 42 *********************** 221 2023-05-22 20:48 43 ************************ 222 2023-05-22 20:49 42 *********************** 223 2023-05-22 20:50 43 ************************ 224 2023-05-22 20:51 42 *********************** 225 2023-05-22 20:52 42 *********************** 226 2023-05-22 20:53 43 ************************ 227 2023-05-22 20:54 43 ************************ 228 2023-05-22 20:55 42 *********************** 229 2023-05-22 20:56 43 ************************ 230 2023-05-22 20:57 43 ************************ 231 2023-05-22 20:58 42 *********************** 232 2023-05-22 20:59 43 ************************ 233 2023-05-22 21:00 43 ************************ 234 2023-05-22 21:01 43 ************************ 235 2023-05-22 21:02 42 *********************** 236 2023-05-22 21:03 43 ************************ ... ..(105 skipped). .. ************************ 342 2023-05-22 22:49 43 ************************ 343 2023-05-22 22:50 42 *********************** ... ..( 26 skipped). .. *********************** 370 2023-05-22 23:17 42 *********************** 371 2023-05-22 23:18 43 ************************ 372 2023-05-22 23:19 42 *********************** 373 2023-05-22 23:20 42 *********************** 374 2023-05-22 23:21 43 ************************ 375 2023-05-22 23:22 42 *********************** 376 2023-05-22 23:23 43 ************************ 377 2023-05-22 23:24 42 *********************** 378 2023-05-22 23:25 43 ************************ 379 2023-05-22 23:26 42 *********************** ... ..( 3 skipped). .. *********************** 383 2023-05-22 23:30 42 *********************** 384 2023-05-22 23:31 43 ************************ ... ..(119 skipped). .. ************************ 26 2023-05-23 01:31 43 ************************ SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 36849 Vendor specific /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYX-01Y7B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V02 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 23 01:31:50 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 164) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3210 3 Spin_Up_Time POS--K 173 171 021 - 4350 4 Start_Stop_Count -O--CK 096 096 000 - 4163 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 043 043 000 - 41804 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2432 192 Power-Off_Retract_Count -O--CK 198 198 000 - 2077 193 Load_Cycle_Count -O--CK 200 200 000 - 2085 194 Temperature_Celsius -O---K 109 086 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 13 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 36856 - # 2 Short offline Completed without error 00% 36832 - # 3 Short offline Completed without error 00% 36808 - # 4 Short offline Completed without error 00% 36784 - # 5 Short offline Completed without error 00% 36760 - # 6 Short offline Completed without error 00% 36736 - # 7 Short offline Completed without error 00% 36712 - # 8 Short offline Completed without error 00% 36688 - # 9 Short offline Completed without error 00% 36664 - #10 Short offline Completed without error 00% 36640 - #11 Short offline Completed without error 00% 36616 - #12 Short offline Completed without error 00% 36592 - #13 Short offline Completed without error 00% 36568 - #14 Short offline Completed without error 00% 36544 - #15 Short offline Completed without error 00% 36528 - #16 Short offline Completed without error 00% 36498 - #17 Short offline Completed without error 00% 4151 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 31/39 Celsius Lifetime Min/Max Temperature: 31/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (356) Index Estimated Time Temperature Celsius 357 2023-05-22 17:34 37 ****************** ... ..( 30 skipped). .. ****************** 388 2023-05-22 18:05 37 ****************** 389 2023-05-22 18:06 38 ******************* 390 2023-05-22 18:07 38 ******************* 391 2023-05-22 18:08 37 ****************** 392 2023-05-22 18:09 37 ****************** 393 2023-05-22 18:10 38 ******************* 394 2023-05-22 18:11 37 ****************** 395 2023-05-22 18:12 38 ******************* ... ..( 4 skipped). .. ******************* 400 2023-05-22 18:17 38 ******************* 401 2023-05-22 18:18 37 ****************** 402 2023-05-22 18:19 37 ****************** 403 2023-05-22 18:20 38 ******************* ... ..( 69 skipped). .. ******************* 473 2023-05-22 19:30 38 ******************* 474 2023-05-22 19:31 37 ****************** 475 2023-05-22 19:32 38 ******************* 476 2023-05-22 19:33 38 ******************* 477 2023-05-22 19:34 37 ****************** ... ..( 7 skipped). .. ****************** 7 2023-05-22 19:42 37 ****************** 8 2023-05-22 19:43 38 ******************* 9 2023-05-22 19:44 37 ****************** 10 2023-05-22 19:45 38 ******************* 11 2023-05-22 19:46 37 ****************** 12 2023-05-22 19:47 38 ******************* 13 2023-05-22 19:48 38 ******************* 14 2023-05-22 19:49 38 ******************* 15 2023-05-22 19:50 37 ****************** 16 2023-05-22 19:51 37 ****************** 17 2023-05-22 19:52 38 ******************* ... ..( 48 skipped). .. ******************* 66 2023-05-22 20:41 38 ******************* 67 2023-05-22 20:42 39 ******************** 68 2023-05-22 20:43 38 ******************* ... ..( 2 skipped). .. ******************* 71 2023-05-22 20:46 38 ******************* 72 2023-05-22 20:47 39 ******************** 73 2023-05-22 20:48 38 ******************* 74 2023-05-22 20:49 39 ******************** 75 2023-05-22 20:50 38 ******************* 76 2023-05-22 20:51 39 ******************** ... ..( 84 skipped). .. ******************** 161 2023-05-22 22:16 39 ******************** 162 2023-05-22 22:17 38 ******************* 163 2023-05-22 22:18 39 ******************** ... ..( 2 skipped). .. ******************** 166 2023-05-22 22:21 39 ******************** 167 2023-05-22 22:22 38 ******************* 168 2023-05-22 22:23 39 ******************** 169 2023-05-22 22:24 39 ******************** 170 2023-05-22 22:25 38 ******************* 171 2023-05-22 22:26 39 ******************** 172 2023-05-22 22:27 39 ******************** 173 2023-05-22 22:28 39 ******************** 174 2023-05-22 22:29 38 ******************* ... ..( 3 skipped). .. ******************* 178 2023-05-22 22:33 38 ******************* 179 2023-05-22 22:34 39 ******************** 180 2023-05-22 22:35 38 ******************* ... ..( 19 skipped). .. ******************* 200 2023-05-22 22:55 38 ******************* 201 2023-05-22 22:56 37 ****************** 202 2023-05-22 22:57 38 ******************* 203 2023-05-22 22:58 37 ****************** ... ..( 19 skipped). .. ****************** 223 2023-05-22 23:18 37 ****************** 224 2023-05-22 23:19 38 ******************* 225 2023-05-22 23:20 37 ****************** 226 2023-05-22 23:21 38 ******************* 227 2023-05-22 23:22 38 ******************* 228 2023-05-22 23:23 38 ******************* 229 2023-05-22 23:24 37 ****************** 230 2023-05-22 23:25 38 ******************* ... ..( 48 skipped). .. ******************* 279 2023-05-23 00:14 38 ******************* 280 2023-05-23 00:15 37 ****************** 281 2023-05-23 00:16 38 ******************* 282 2023-05-23 00:17 38 ******************* 283 2023-05-23 00:18 38 ******************* 284 2023-05-23 00:19 37 ****************** 285 2023-05-23 00:20 37 ****************** 286 2023-05-23 00:21 37 ****************** 287 2023-05-23 00:22 38 ******************* 288 2023-05-23 00:23 38 ******************* 289 2023-05-23 00:24 37 ****************** 290 2023-05-23 00:25 38 ******************* 291 2023-05-23 00:26 37 ****************** 292 2023-05-23 00:27 37 ****************** 293 2023-05-23 00:28 37 ****************** 294 2023-05-23 00:29 38 ******************* ... ..( 49 skipped). .. ******************* 344 2023-05-23 01:19 38 ******************* 345 2023-05-23 01:20 37 ****************** ... ..( 10 skipped). .. ****************** 356 2023-05-23 01:31 37 ****************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 36844 Vendor specific /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYZ-010FB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 23 01:31:51 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 169 021 - 4366 4 Start_Stop_Count -O--CK 096 096 000 - 4371 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 064 064 000 - 26290 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2716 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1153 193 Load_Cycle_Count -O--CK 199 199 000 - 3217 194 Temperature_Celsius -O---K 112 092 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 25015 hours (1042 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 28 a9 24 98 40 00 Error: UNC at LBA = 0x28a92498 = 682173592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 02 00 00 40 00 00 28 a9 25 00 40 08 03:12:35.621 READ FPDMA QUEUED 60 00 68 00 38 00 00 28 a9 24 98 40 08 03:12:35.621 READ FPDMA QUEUED 60 00 88 00 30 00 00 28 a9 24 10 40 08 03:12:35.621 READ FPDMA QUEUED 60 00 b8 00 28 00 00 28 a9 23 58 40 08 03:12:35.621 READ FPDMA QUEUED 60 01 f8 00 20 00 00 28 a9 21 60 40 08 03:12:35.621 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 24557 - # 2 Short offline Completed without error 00% 24533 - # 3 Short offline Completed without error 00% 24509 - # 4 Short offline Completed without error 00% 24485 - # 5 Short offline Completed without error 00% 24461 - # 6 Short offline Completed without error 00% 24437 - # 7 Short offline Completed without error 00% 24413 - # 8 Short offline Completed without error 00% 24389 - # 9 Short offline Completed without error 00% 24365 - #10 Short offline Completed without error 00% 24341 - #11 Short offline Completed without error 00% 24317 - #12 Short offline Completed without error 00% 24293 - #13 Short offline Completed without error 00% 24269 - #14 Short offline Completed without error 00% 24245 - #15 Short offline Completed without error 00% 24221 - #16 Short offline Completed without error 00% 24197 - #17 Short offline Completed without error 00% 23361 - #18 Short offline Completed without error 00% 23318 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 31/36 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (73) Index Estimated Time Temperature Celsius 74 2023-05-22 17:34 36 ***************** ... ..(107 skipped). .. ***************** 182 2023-05-22 19:22 36 ***************** 183 2023-05-22 19:23 35 **************** ... ..(305 skipped). .. **************** 11 2023-05-23 00:29 35 **************** 12 2023-05-23 00:30 36 ***************** ... ..( 60 skipped). .. ***************** 73 2023-05-23 01:31 36 ***************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 36849 Vendor specific /dev/sde smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYZ-010FB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 23 01:31:51 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 164) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 188 051 - 0 3 Spin_Up_Time POS--K 173 171 021 - 4341 4 Start_Stop_Count -O--CK 096 096 000 - 4825 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 057 057 000 - 31431 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3137 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1405 193 Load_Cycle_Count -O--CK 199 199 000 - 3423 194 Temperature_Celsius -O---K 112 086 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 102 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1403 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1403 [10] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 58 00 00 03 2e b4 60 40 00 00:02:47.850 READ FPDMA QUEUED 60 00 08 00 50 00 00 07 de a7 a8 40 00 00:02:47.838 READ FPDMA QUEUED 61 00 08 00 48 00 00 00 bc e0 10 40 00 00:02:47.838 WRITE FPDMA QUEUED 60 01 00 00 c0 00 00 03 0c 80 28 40 00 00:02:47.746 READ FPDMA QUEUED 60 00 08 00 b8 00 00 07 dc 5d 10 40 00 00:02:47.746 READ FPDMA QUEUED Error 1402 [9] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 c0 00 00 03 0c 80 28 40 00 00:02:45.939 READ FPDMA QUEUED 60 00 08 00 b8 00 00 07 dc 5d 10 40 00 00:02:45.939 READ FPDMA QUEUED 60 00 18 00 b0 00 00 00 48 a1 b8 40 00 00:02:45.939 READ FPDMA QUEUED 60 00 40 00 a8 00 00 12 49 30 42 40 00 00:02:45.939 READ FPDMA QUEUED 60 00 48 00 a0 00 00 18 40 c6 00 40 00 00:02:45.939 READ FPDMA QUEUED Error 1401 [8] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 80 00 00 03 2e b4 60 40 00 00:02:43.944 READ FPDMA QUEUED 60 00 08 00 78 00 00 00 1c ca c0 40 00 00:02:43.944 READ FPDMA QUEUED 60 00 10 00 70 00 00 00 97 aa e8 40 00 00:02:43.939 READ FPDMA QUEUED 60 00 08 00 68 00 00 07 dc 5c e8 40 00 00:02:43.932 READ FPDMA QUEUED 60 01 00 00 60 00 00 00 97 a9 e8 40 00 00:02:43.929 READ FPDMA QUEUED Error 1400 [7] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 68 00 00 00 2b 99 82 40 00 00:02:41.998 READ FPDMA QUEUED 61 00 38 00 60 00 00 00 0a b0 28 40 00 00:02:41.998 WRITE FPDMA QUEUED 60 00 40 00 58 00 00 00 18 08 68 40 00 00:02:41.998 READ FPDMA QUEUED 60 00 10 00 50 00 00 00 37 a4 72 40 00 00:02:41.998 READ FPDMA QUEUED 60 00 40 00 48 00 00 00 1d a4 7a 40 00 00:02:41.998 READ FPDMA QUEUED Error 1399 [6] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 e0 00 00 00 37 a2 a2 40 00 00:02:40.020 READ FPDMA QUEUED 60 00 18 00 d8 00 00 00 48 a1 08 40 00 00:02:40.020 READ FPDMA QUEUED 60 00 20 00 d0 00 00 00 2b a3 3b 40 00 00:02:40.020 READ FPDMA QUEUED 61 00 08 00 c8 00 00 00 04 c0 68 40 00 00:02:40.020 WRITE FPDMA QUEUED 60 00 38 00 a8 00 00 00 31 28 c8 40 00 00:02:40.020 READ FPDMA QUEUED Error 1398 [5] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: WP at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 b0 00 00 07 d6 29 08 40 00 00:02:36.299 WRITE FPDMA QUEUED 61 00 08 00 a8 00 00 00 60 bf 28 40 00 00:02:36.299 WRITE FPDMA QUEUED 61 00 08 00 a0 00 00 03 53 39 c0 40 00 00:02:36.298 WRITE FPDMA QUEUED 61 00 18 00 98 00 00 02 58 ca 88 40 00 00:02:36.298 WRITE FPDMA QUEUED 60 00 08 00 90 00 00 03 2e b4 60 40 00 00:02:36.298 READ FPDMA QUEUED Error 1397 [4] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: UNC at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 88 00 00 03 2e b5 60 40 00 00:02:34.365 READ FPDMA QUEUED 60 01 00 00 80 00 00 03 2e b4 60 40 00 00:02:34.365 READ FPDMA QUEUED 61 00 78 00 78 00 00 05 7c d7 e0 40 00 00:02:34.364 WRITE FPDMA QUEUED 60 00 08 00 70 00 00 00 af e0 f0 40 00 00:02:34.364 READ FPDMA QUEUED 61 01 00 00 68 00 00 05 7c d6 e0 40 00 00:02:34.364 WRITE FPDMA QUEUED Error 1396 [3] occurred at disk power-on lifetime: 28624 hours (1192 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 2e b4 63 40 00 Error: WP at LBA = 0x032eb463 = 53392483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 58 00 f0 00 00 01 07 0b c0 40 00 00:02:32.158 WRITE FPDMA QUEUED 61 00 48 00 e8 00 00 00 0f b6 80 40 00 00:02:32.152 WRITE FPDMA QUEUED 61 00 20 00 e0 00 00 00 38 03 e0 40 00 00:02:32.152 WRITE FPDMA QUEUED 61 00 18 00 d8 00 00 00 37 f3 80 40 00 00:02:32.149 WRITE FPDMA QUEUED 61 00 08 00 c8 00 00 00 38 3b f8 40 00 00:02:32.149 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 26267 - # 2 Short offline Completed without error 00% 26243 - # 3 Short offline Completed without error 00% 26219 - # 4 Short offline Completed without error 00% 26195 - # 5 Short offline Completed without error 00% 26171 - # 6 Short offline Completed without error 00% 26147 - # 7 Short offline Completed without error 00% 26123 - # 8 Short offline Completed without error 00% 26099 - # 9 Short offline Completed without error 00% 26075 - #10 Short offline Completed without error 00% 26051 - #11 Short offline Completed without error 00% 26027 - #12 Short offline Completed without error 00% 26003 - #13 Short offline Completed without error 00% 25979 - #14 Short offline Completed without error 00% 25955 - #15 Short offline Completed without error 00% 25939 - #16 Short offline Completed without error 00% 25909 - #17 Short offline Completed without error 00% 23380 - #18 Short offline Completed without error 00% 23337 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 30/35 Celsius Lifetime Min/Max Temperature: 0/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (292) Index Estimated Time Temperature Celsius 293 2023-05-22 17:34 34 *************** ... ..( 43 skipped). .. *************** 337 2023-05-22 18:18 34 *************** 338 2023-05-22 18:19 35 **************** ... ..(258 skipped). .. **************** 119 2023-05-22 22:38 35 **************** 120 2023-05-22 22:39 34 *************** ... ..( 32 skipped). .. *************** 153 2023-05-22 23:12 34 *************** 154 2023-05-22 23:13 35 **************** ... ..( 47 skipped). .. **************** 202 2023-05-23 00:01 35 **************** 203 2023-05-23 00:02 34 *************** ... ..( 17 skipped). .. *************** 221 2023-05-23 00:20 34 *************** 222 2023-05-23 00:21 35 **************** ... ..( 35 skipped). .. **************** 258 2023-05-23 00:57 35 **************** 259 2023-05-23 00:58 33 ************** 260 2023-05-23 00:59 33 ************** 261 2023-05-23 01:00 33 ************** 262 2023-05-23 01:01 34 *************** ... ..( 29 skipped). .. *************** 292 2023-05-23 01:31 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 36845 Vendor specific /dev/sdf smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.3-zen1-1-zen] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD1003FBYX-01Y7B2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01V03 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 23 01:31:51 2023 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 197 051 - 0 3 Spin_Up_Time POS--K 173 170 021 - 4350 4 Start_Stop_Count -O--CK 096 096 000 - 4173 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 043 043 000 - 41870 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2433 192 Power-Off_Retract_Count -O--CK 198 198 000 - 2079 193 Load_Cycle_Count -O--CK 200 200 000 - 2097 194 Temperature_Celsius -O---K 111 094 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 199 000 - 58 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 36905 - # 2 Short offline Completed without error 00% 36881 - # 3 Short offline Completed without error 00% 36857 - # 4 Short offline Completed without error 00% 36833 - # 5 Short offline Completed without error 00% 36809 - # 6 Short offline Completed without error 00% 36785 - # 7 Short offline Completed without error 00% 36761 - # 8 Short offline Completed without error 00% 36737 - # 9 Short offline Completed without error 00% 36713 - #10 Short offline Completed without error 00% 36689 - #11 Short offline Completed without error 00% 36665 - #12 Short offline Completed without error 00% 36641 - #13 Short offline Completed without error 00% 36617 - #14 Short offline Completed without error 00% 36593 - #15 Short offline Completed without error 00% 36577 - #16 Short offline Completed without error 00% 36547 - #17 Short offline Completed without error 00% 4156 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 31/36 Celsius Lifetime Min/Max Temperature: 0/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (366) Index Estimated Time Temperature Celsius 367 2023-05-22 17:34 35 **************** ... ..(193 skipped). .. **************** 83 2023-05-22 20:48 35 **************** 84 2023-05-22 20:49 36 ***************** ... ..(269 skipped). .. ***************** 354 2023-05-23 01:19 36 ***************** 355 2023-05-23 01:20 35 **************** ... ..( 10 skipped). .. **************** 366 2023-05-23 01:31 35 **************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 36845 Vendor specific