/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.16.0-desktop-1omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKNW512G8 Serial Number: -- Firmware Version: 004C PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Tue Aug 19 13:41:03 2025 -03 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 2.00W - - 2 2 2 2 0 0 3 - 0.0250W - - 3 3 3 3 5000 5000 4 - 0.0040W - - 4 4 4 4 5000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 25 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 11% Data Units Read: 74,457,889 [38.1 TB] Data Units Written: 61,584,860 [31.5 TB] Host Read Commands: 821,199,628 Host Write Commands: 895,360,930 Controller Busy Time: 18,067 Power Cycles: 2,276 Power On Hours: 4,299 Unsafe Shutdowns: 789 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress No Self-tests Logged /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.16.0-desktop-1omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-22ZCT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 11.01A11 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Aug 19 13:41:03 2025 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 197 051 - 0 3 Spin_Up_Time POS--K 191 181 021 - 1416 4 Start_Stop_Count -O--CK 096 096 000 - 4228 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4919 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4041 192 Power-Off_Retract_Count -O--CK 200 200 000 - 466 193 Load_Cycle_Count -O--CK 180 180 000 - 61741 194 Temperature_Celsius -O---K 114 078 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 2 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 4045 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4045 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 7e 60 12 76 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 78 08 00 c8 12 73 1c 76 60 00 00 00 00:00:00.128 NOP [Reserved subcommand] [OBS-ACS-2] 18 4f 60 12 76 00 70 00 00 00 00 00 18 00:20:09.955 RECALIBRATE [RET-4] 00 60 00 00 00 12 4c 1a 76 60 00 00 00 00:00:00.104 NOP [Abort queued commands] Error 4044 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 9b 60 12 53 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 a0 08 00 38 12 66 20 53 60 00 00 00 00:00:00.168 NOP [Reserved subcommand] [OBS-ACS-2] 1a 66 60 12 53 00 98 00 38 08 00 00 21 00:20:00.998 RECALIBRATE [RET-4] 00 88 08 00 00 12 66 18 53 61 00 00 00 00:00:57.488 NOP [Reserved subcommand] [OBS-ACS-2] Error 4043 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 30 60 12 45 00 00 00 00 00 00 00 21 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 48 10 00 10 12 2f 18 45 60 00 00 00 00:00:41.040 NOP [Reserved subcommand] [OBS-ACS-2] 1b 23 61 12 45 00 40 00 70 08 00 00 18 00:19:57.359 RECALIBRATE [RET-4] 00 30 20 00 60 12 23 06 45 61 00 00 00 00:00:30.776 NOP [Reserved subcommand] [OBS-ACS-2] Error 4042 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 0f 60 12 38 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 e0 20 00 a0 12 0f 06 38 61 00 00 00 00:00:14.568 NOP [Reserved subcommand] [OBS-ACS-2] 21 ee 60 12 37 00 d8 00 60 40 00 00 1a 00:19:53.966 READ SECTOR(S) [OBS-5] 00 c8 00 00 00 12 ee 20 37 60 00 00 00 00:00:56.016 NOP [Abort queued commands] Error 4041 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 6a 60 12 2a 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 b0 40 00 da 12 6a 1a 2a 60 00 00 00 00:00:00.184 NOP [Reserved subcommand] [OBS-ACS-2] 21 6a ef 12 2a 00 a8 00 60 40 00 00 00 00:19:50.506 READ SECTOR(S) [OBS-5] 00 00 02 00 00 12 6a 00 2a ef 00 00 00 00:00:00.003 NOP [Reserved subcommand] [OBS-ACS-2] Error 4040 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 9b 61 12 1b 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 98 20 00 40 12 9a 06 1b 61 00 00 00 00:00:49.312 NOP [Reserved subcommand] [OBS-ACS-2] 20 95 61 12 1b 00 90 00 18 08 00 00 06 00:19:46.709 READ SECTOR(S) 00 80 08 00 10 12 8f 20 1b 61 00 00 00 00:00:08.328 NOP [Reserved subcommand] [OBS-ACS-2] Error 4039 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 32 60 12 08 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 58 40 00 08 12 1c 1f 08 60 00 00 00 00:00:00.096 NOP [Reserved subcommand] [OBS-ACS-2] 00 d9 60 12 07 00 00 00 00 00 00 00 21 00:19:41.703 NOP [Reserved subcommand] [OBS-ACS-2] 00 40 08 00 40 12 d8 18 07 61 00 00 00 00:00:57.416 NOP [Reserved subcommand] [OBS-ACS-2] Error 4038 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 97 60 11 fa 00 00 00 00 00 00 00 20 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 08 00 22 11 8a 1a fa 60 00 00 00 00:00:00.016 NOP [Reserved subcommand] [OBS-ACS-2] 1f 7e 60 11 fa 00 f8 00 08 40 00 00 1a 00:19:38.248 RECALIBRATE [RET-4] 00 e8 40 00 a0 11 7d 21 fa 60 00 00 00 00:00:39.664 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 32/33 Celsius Lifetime Min/Max Temperature: 25/70 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (78) Index Estimated Time Temperature Celsius 79 2025-08-19 11:34 33 ************** ... ..( 74 skipped). .. ************** 26 2025-08-19 12:49 33 ************** 27 2025-08-19 12:50 ? - 28 2025-08-19 12:51 25 ****** 29 2025-08-19 12:52 25 ****** 30 2025-08-19 12:53 27 ******** 31 2025-08-19 12:54 27 ******** 32 2025-08-19 12:55 27 ******** 33 2025-08-19 12:56 28 ********* 34 2025-08-19 12:57 28 ********* 35 2025-08-19 12:58 29 ********** ... ..( 2 skipped). .. ********** 38 2025-08-19 13:01 29 ********** 39 2025-08-19 13:02 30 *********** 40 2025-08-19 13:03 30 *********** 41 2025-08-19 13:04 30 *********** 42 2025-08-19 13:05 31 ************ 43 2025-08-19 13:06 31 ************ 44 2025-08-19 13:07 31 ************ 45 2025-08-19 13:08 ? - 46 2025-08-19 13:09 31 ************ 47 2025-08-19 13:10 32 ************* ... ..( 4 skipped). .. ************* 52 2025-08-19 13:15 32 ************* 53 2025-08-19 13:16 31 ************ 54 2025-08-19 13:17 32 ************* 55 2025-08-19 13:18 32 ************* 56 2025-08-19 13:19 32 ************* 57 2025-08-19 13:20 ? - 58 2025-08-19 13:21 32 ************* ... ..( 9 skipped). .. ************* 68 2025-08-19 13:31 32 ************* 69 2025-08-19 13:32 ? - 70 2025-08-19 13:33 33 ************** 71 2025-08-19 13:34 32 ************* 72 2025-08-19 13:35 32 ************* 73 2025-08-19 13:36 32 ************* 74 2025-08-19 13:37 33 ************** ... ..( 3 skipped). .. ************** 78 2025-08-19 13:41 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 519 Vendor specific /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.16.0-desktop-1omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Mobile HDD Device Model: ST1000LM035-1RK172 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SDM2 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 19 13:41:04 2025 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 167) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 073 057 006 - 116457138 3 Spin_Up_Time PO---- 100 099 000 - 0 4 Start_Stop_Count -O--CK 069 069 020 - 32149 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 088 060 045 - 4887206856 9 Power_On_Hours -O--CK 092 092 000 - 7589 (129 91 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3843 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 12885753883 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 051 040 - 31 (Min/Max 30/31) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 179 192 Power-Off_Retract_Count -O--CK 100 100 000 - 242 193 Load_Cycle_Count -O--CK 079 079 000 - 42758 194 Temperature_Celsius -O---K 031 049 000 - 31 (0 13 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 7471 (211 171 0) 241 Total_LBAs_Written ------ 100 253 000 - 44604619779 242 Total_LBAs_Read ------ 100 253 000 - 40019429105 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 8920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/31 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Specified Max Operating Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (80) Index Estimated Time Temperature Celsius 81 2025-08-16 22:00 ? - 82 2025-08-16 22:30 35 **************** 83 2025-08-16 23:00 ? - 84 2025-08-16 23:30 35 **************** 85 2025-08-17 00:00 ? - 86 2025-08-17 00:30 34 *************** 87 2025-08-17 01:00 ? - 88 2025-08-17 01:30 35 **************** 89 2025-08-17 02:00 ? - 90 2025-08-17 02:30 33 ************** 91 2025-08-17 03:00 ? - 92 2025-08-17 03:30 30 *********** 93 2025-08-17 04:00 ? - 94 2025-08-17 04:30 30 *********** 95 2025-08-17 05:00 ? - 96 2025-08-17 05:30 31 ************ 97 2025-08-17 06:00 ? - 98 2025-08-17 06:30 31 ************ 99 2025-08-17 07:00 ? - 100 2025-08-17 07:30 31 ************ 101 2025-08-17 08:00 ? - 102 2025-08-17 08:30 31 ************ 103 2025-08-17 09:00 ? - 104 2025-08-17 09:30 31 ************ 105 2025-08-17 10:00 ? - 106 2025-08-17 10:30 32 ************* 107 2025-08-17 11:00 ? - 108 2025-08-17 11:30 32 ************* 109 2025-08-17 12:00 ? - 110 2025-08-17 12:30 33 ************** 111 2025-08-17 13:00 ? - 112 2025-08-17 13:30 31 ************ 113 2025-08-17 14:00 ? - 114 2025-08-17 14:30 26 ******* 115 2025-08-17 15:00 ? - 116 2025-08-17 15:30 26 ******* 117 2025-08-17 16:00 ? - 118 2025-08-17 16:30 20 * 119 2025-08-17 17:00 ? - 120 2025-08-17 17:30 21 ** 121 2025-08-17 18:00 ? - 122 2025-08-17 18:30 24 ***** 123 2025-08-17 19:00 ? - 124 2025-08-17 19:30 25 ****** 125 2025-08-17 20:00 ? - 126 2025-08-17 20:30 26 ******* 127 2025-08-17 21:00 ? - 0 2025-08-17 21:30 28 ********* 1 2025-08-17 22:00 ? - 2 2025-08-17 22:30 31 ************ 3 2025-08-17 23:00 ? - 4 2025-08-17 23:30 32 ************* 5 2025-08-18 00:00 ? - 6 2025-08-18 00:30 29 ********** 7 2025-08-18 01:00 ? - 8 2025-08-18 01:30 29 ********** 9 2025-08-18 02:00 ? - 10 2025-08-18 02:30 30 *********** 11 2025-08-18 03:00 ? - 12 2025-08-18 03:30 30 *********** 13 2025-08-18 04:00 ? - 14 2025-08-18 04:30 29 ********** 15 2025-08-18 05:00 ? - 16 2025-08-18 05:30 30 *********** 17 2025-08-18 06:00 ? - 18 2025-08-18 06:30 25 ****** 19 2025-08-18 07:00 ? - 20 2025-08-18 07:30 26 ******* 21 2025-08-18 08:00 ? - 22 2025-08-18 08:30 27 ******** 23 2025-08-18 09:00 ? - 24 2025-08-18 09:30 28 ********* 25 2025-08-18 10:00 ? - 26 2025-08-18 10:30 28 ********* 27 2025-08-18 11:00 ? - 28 2025-08-18 11:30 25 ****** 29 2025-08-18 12:00 ? - 30 2025-08-18 12:30 32 ************* 31 2025-08-18 13:00 ? - 32 2025-08-18 13:30 31 ************ 33 2025-08-18 14:00 ? - 34 2025-08-18 14:30 33 ************** 35 2025-08-18 15:00 ? - 36 2025-08-18 15:30 29 ********** 37 2025-08-18 16:00 ? - 38 2025-08-18 16:30 31 ************ 39 2025-08-18 17:00 ? - 40 2025-08-18 17:30 31 ************ 41 2025-08-18 18:00 ? - 42 2025-08-18 18:30 31 ************ 43 2025-08-18 19:00 ? - 44 2025-08-18 19:30 31 ************ 45 2025-08-18 20:00 ? - 46 2025-08-18 20:30 32 ************* 47 2025-08-18 21:00 ? - 48 2025-08-18 21:30 25 ****** 49 2025-08-18 22:00 ? - 50 2025-08-18 22:30 26 ******* 51 2025-08-18 23:00 ? - 52 2025-08-18 23:30 23 **** 53 2025-08-19 00:00 ? - 54 2025-08-19 00:30 28 ********* 55 2025-08-19 01:00 ? - 56 2025-08-19 01:30 29 ********** 57 2025-08-19 02:00 ? - 58 2025-08-19 02:30 23 **** 59 2025-08-19 03:00 ? - 60 2025-08-19 03:30 24 ***** 61 2025-08-19 04:00 ? - 62 2025-08-19 04:30 27 ******** 63 2025-08-19 05:00 ? - 64 2025-08-19 05:30 28 ********* 65 2025-08-19 06:00 ? - 66 2025-08-19 06:30 28 ********* 67 2025-08-19 07:00 ? - 68 2025-08-19 07:30 29 ********** 69 2025-08-19 08:00 ? - 70 2025-08-19 08:30 29 ********** 71 2025-08-19 09:00 ? - 72 2025-08-19 09:30 31 ************ 73 2025-08-19 10:00 ? - 74 2025-08-19 10:30 24 ***** 75 2025-08-19 11:00 ? - 76 2025-08-19 11:30 29 ********** 77 2025-08-19 12:00 ? - 78 2025-08-19 12:30 30 *********** 79 2025-08-19 13:00 ? - 80 2025-08-19 13:30 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3843 --- Lifetime Power-On Resets 0x01 0x010 4 7589 --- Power-on Hours 0x01 0x018 6 44627957218 --- Logical Sectors Written 0x01 0x020 6 955754969 --- Number of Write Commands 0x01 0x028 6 40039525647 --- Logical Sectors Read 0x01 0x030 6 717122832 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2114 --- Spindle Motor Power-on Hours 0x03 0x010 4 1207 --- Head Flying Hours 0x03 0x018 4 42758 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 7 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 118 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 28 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS