Probe #a890415f0e of Gigabyte B85M-DS3H-A Desktop Computer

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat May 27 21:11:15 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 135 12 Power_Cycle_Count -O--CK 099 099 000 - 59 177 Wear_Leveling_Count PO--C- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 065 058 000 - 35 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 54 241 Total_LBAs_Written -O--CK 099 099 000 - 356111823 252 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 117 - # 2 Short offline Completed without error 00% 93 - # 3 Short offline Completed without error 00% 69 - # 4 Short offline Completed without error 00% 45 - # 5 Short offline Completed without error 00% 21 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 25/40 Celsius Lifetime Min/Max Temperature: 25/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (116) Index Estimated Time Temperature Celsius 117 2023-05-27 00:00 31 ************ 118 2023-05-27 00:10 31 ************ 119 2023-05-27 00:20 30 *********** 120 2023-05-27 00:30 30 *********** 121 2023-05-27 00:40 30 *********** 122 2023-05-27 00:50 29 ********** ... ..( 8 skipped). .. ********** 3 2023-05-27 02:20 29 ********** 4 2023-05-27 02:30 28 ********* ... ..( 6 skipped). .. ********* 11 2023-05-27 03:40 28 ********* 12 2023-05-27 03:50 27 ******** ... ..( 3 skipped). .. ******** 16 2023-05-27 04:30 27 ******** 17 2023-05-27 04:40 26 ******* ... ..( 6 skipped). .. ******* 24 2023-05-27 05:50 26 ******* 25 2023-05-27 06:00 25 ****** ... ..( 2 skipped). .. ****** 28 2023-05-27 06:30 25 ****** 29 2023-05-27 06:40 26 ******* ... ..( 9 skipped). .. ******* 39 2023-05-27 08:20 26 ******* 40 2023-05-27 08:30 27 ******** 41 2023-05-27 08:40 28 ********* 42 2023-05-27 08:50 27 ******** 43 2023-05-27 09:00 27 ******** 44 2023-05-27 09:10 27 ******** 45 2023-05-27 09:20 28 ********* ... ..( 3 skipped). .. ********* 49 2023-05-27 10:00 28 ********* 50 2023-05-27 10:10 29 ********** 51 2023-05-27 10:20 29 ********** 52 2023-05-27 10:30 29 ********** 53 2023-05-27 10:40 30 *********** ... ..( 2 skipped). .. *********** 56 2023-05-27 11:10 30 *********** 57 2023-05-27 11:20 31 ************ ... ..( 3 skipped). .. ************ 61 2023-05-27 12:00 31 ************ 62 2023-05-27 12:10 32 ************* ... ..( 5 skipped). .. ************* 68 2023-05-27 13:10 32 ************* 69 2023-05-27 13:20 33 ************** ... ..( 4 skipped). .. ************** 74 2023-05-27 14:10 33 ************** 75 2023-05-27 14:20 34 *************** ... ..( 6 skipped). .. *************** 82 2023-05-27 15:30 34 *************** 83 2023-05-27 15:40 35 **************** 84 2023-05-27 15:50 35 **************** 85 2023-05-27 16:00 36 ***************** 86 2023-05-27 16:10 37 ****************** 87 2023-05-27 16:20 37 ****************** 88 2023-05-27 16:30 36 ***************** 89 2023-05-27 16:40 35 **************** ... ..( 8 skipped). .. **************** 98 2023-05-27 18:10 35 **************** 99 2023-05-27 18:20 36 ***************** 100 2023-05-27 18:30 35 **************** ... ..( 6 skipped). .. **************** 107 2023-05-27 19:40 35 **************** 108 2023-05-27 19:50 36 ***************** 109 2023-05-27 20:00 35 **************** 110 2023-05-27 20:10 35 **************** 111 2023-05-27 20:20 34 *************** ... ..( 2 skipped). .. *************** 114 2023-05-27 20:50 34 *************** 115 2023-05-27 21:00 35 **************** 116 2023-05-27 21:10 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 59 --- Lifetime Power-On Resets 0x01 0x010 4 135 --- Power-on Hours 0x01 0x018 6 356111823 --- Logical Sectors Written 0x01 0x020 6 5205532 --- Number of Write Commands 0x01 0x028 6 20494993 --- Logical Sectors Read 0x01 0x030 6 224698 --- Number of Read Commands 0x01 0x038 6 1644000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 25 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 36 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: SAMSUNG MZ7TE256HMHP-000L7 Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT09L6Q User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat May 27 21:11:15 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--CK 098 098 000 - 8491 12 Power_Cycle_Count -O--CK 098 098 000 - 1275 175 Program_Fail_Count_Chip -O--CK 100 100 010 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--C- 088 088 005 - 136 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 099 099 010 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 1 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 099 100 010 - 4382 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 1 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 1 190 Airflow_Temperature_Cel -O--CK 063 050 000 - 37 195 ECC_Error_Rate -O-RC- 199 199 000 - 1 198 Offline_Uncorrectable ----CK 099 099 000 - 1 199 CRC_Error_Count -OSRCK 100 100 000 - 0 233 Media_Wearout_Indicator -O-RCK 199 199 000 - 755293 234 Unknown_Samsung_Attr -O--C- 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 127 236 Unknown_Samsung_Attr -O--C- 099 099 000 - 90 237 Unknown_Samsung_Attr -O--C- 099 099 000 - 136 238 Unknown_Samsung_Attr -O--C- 099 099 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa5 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 102 - # 2 Short offline Completed without error 00% 78 - # 3 Short offline Completed without error 00% 55 - # 4 Short offline Completed without error 00% 31 - # 5 Short offline Completed without error 00% 7 - # 6 Short offline Completed without error 00% 0 - # 7 Short offline Completed without error 00% 49 - # 8 Short offline Completed without error 00% 7 - # 9 Short offline Completed without error 00% 189 - #10 Short offline Aborted by host 00% 0 - #11 Short offline Completed without error 00% 0 - #12 Short offline Completed without error 00% 1 - #13 Short offline Completed without error 00% 1 - #14 Short offline Completed without error 00% 0 - #15 Short offline Completed without error 00% 1 - #16 Short offline Completed without error 00% 1 - #17 Short offline Completed without error 00% 44 - #18 Short offline Completed without error 00% 0 - #19 Short offline Completed without error 00% 1 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/50972 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2023-05-27 00:00 35 **************** 86 2023-05-27 00:10 35 **************** 87 2023-05-27 00:20 34 *************** ... ..( 2 skipped). .. *************** 90 2023-05-27 00:50 34 *************** 91 2023-05-27 01:00 33 ************** ... ..( 6 skipped). .. ************** 98 2023-05-27 02:10 33 ************** 99 2023-05-27 02:20 32 ************* ... ..( 4 skipped). .. ************* 104 2023-05-27 03:10 32 ************* 105 2023-05-27 03:20 37 ****************** 106 2023-05-27 03:30 32 ************* 107 2023-05-27 03:40 32 ************* 108 2023-05-27 03:50 31 ************ ... ..( 4 skipped). .. ************ 113 2023-05-27 04:40 31 ************ 114 2023-05-27 04:50 30 *********** ... ..( 5 skipped). .. *********** 120 2023-05-27 05:50 30 *********** 121 2023-05-27 06:00 29 ********** ... ..( 7 skipped). .. ********** 1 2023-05-27 07:20 29 ********** 2 2023-05-27 07:30 30 *********** ... ..( 8 skipped). .. *********** 11 2023-05-27 09:00 30 *********** 12 2023-05-27 09:10 31 ************ ... ..( 3 skipped). .. ************ 16 2023-05-27 09:50 31 ************ 17 2023-05-27 10:00 32 ************* ... ..( 4 skipped). .. ************* 22 2023-05-27 10:50 32 ************* 23 2023-05-27 11:00 33 ************** ... ..( 2 skipped). .. ************** 26 2023-05-27 11:30 33 ************** 27 2023-05-27 11:40 34 *************** ... ..( 3 skipped). .. *************** 31 2023-05-27 12:20 34 *************** 32 2023-05-27 12:30 35 **************** ... ..( 5 skipped). .. **************** 38 2023-05-27 13:30 35 **************** 39 2023-05-27 13:40 36 ***************** ... ..( 6 skipped). .. ***************** 46 2023-05-27 14:50 36 ***************** 47 2023-05-27 15:00 37 ****************** ... ..( 6 skipped). .. ****************** 54 2023-05-27 16:10 37 ****************** 55 2023-05-27 16:20 38 ******************* ... ..( 20 skipped). .. ******************* 76 2023-05-27 19:50 38 ******************* 77 2023-05-27 20:00 37 ****************** ... ..( 6 skipped). .. ****************** 84 2023-05-27 21:10 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0BB6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat May 27 21:11:15 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4200) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 70) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 5 9 Power_On_Hours -O--CK 096 096 000 - 19954 12 Power_Cycle_Count -O--CK 099 099 000 - 211 177 Wear_Leveling_Count PO--C- 095 095 000 - 55 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 5 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 5 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 9 190 Airflow_Temperature_Cel -O--CK 062 051 000 - 38 195 ECC_Error_Rate -O-RC- 199 199 000 - 9 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 165 241 Total_LBAs_Written -O--CK 099 099 000 - 21780406791 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 102 - # 2 Short offline Completed without error 00% 78 - # 3 Short offline Completed without error 00% 55 - # 4 Short offline Completed without error 00% 31 - # 5 Short offline Completed without error 00% 7 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/98406 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2023-05-27 00:00 36 ***************** 87 2023-05-27 00:10 35 **************** ... ..( 2 skipped). .. **************** 90 2023-05-27 00:40 35 **************** 91 2023-05-27 00:50 34 *************** ... ..( 5 skipped). .. *************** 97 2023-05-27 01:50 34 *************** 98 2023-05-27 02:00 33 ************** ... ..( 6 skipped). .. ************** 105 2023-05-27 03:10 33 ************** 106 2023-05-27 03:20 34 *************** 107 2023-05-27 03:30 33 ************** 108 2023-05-27 03:40 32 ************* ... ..( 3 skipped). .. ************* 112 2023-05-27 04:20 32 ************* 113 2023-05-27 04:30 31 ************ ... ..( 5 skipped). .. ************ 119 2023-05-27 05:30 31 ************ 120 2023-05-27 05:40 30 *********** ... ..( 13 skipped). .. *********** 6 2023-05-27 08:00 30 *********** 7 2023-05-27 08:10 31 ************ ... ..( 4 skipped). .. ************ 12 2023-05-27 09:00 31 ************ 13 2023-05-27 09:10 32 ************* ... ..( 4 skipped). .. ************* 18 2023-05-27 10:00 32 ************* 19 2023-05-27 10:10 33 ************** ... ..( 3 skipped). .. ************** 23 2023-05-27 10:50 33 ************** 24 2023-05-27 11:00 34 *************** ... ..( 2 skipped). .. *************** 27 2023-05-27 11:30 34 *************** 28 2023-05-27 11:40 35 **************** ... ..( 4 skipped). .. **************** 33 2023-05-27 12:30 35 **************** 34 2023-05-27 12:40 36 ***************** ... ..( 5 skipped). .. ***************** 40 2023-05-27 13:40 36 ***************** 41 2023-05-27 13:50 37 ****************** ... ..( 6 skipped). .. ****************** 48 2023-05-27 15:00 37 ****************** 49 2023-05-27 15:10 38 ******************* ... ..( 13 skipped). .. ******************* 63 2023-05-27 17:30 38 ******************* 64 2023-05-27 17:40 39 ******************** ... ..( 8 skipped). .. ******************** 73 2023-05-27 19:10 39 ******************** 74 2023-05-27 19:20 38 ******************* ... ..( 10 skipped). .. ******************* 85 2023-05-27 21:10 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.2-1-default] (SUSE RPM) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3EA User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat May 27 21:11:15 2023 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10223) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 170) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 134 134 054 - 100 3 Spin_Up_Time POS--- 127 127 024 - 302 (Average 294) 4 Start_Stop_Count -O--C- 100 100 000 - 460 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 2 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 020 - 31 9 Power_On_Hours -O--C- 096 096 000 - 28904 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 460 192 Power-Off_Retract_Count -O--CK 100 100 000 - 530 193 Load_Cycle_Count -O--C- 100 100 000 - 530 194 Temperature_Celsius -O---- 146 146 000 - 41 (Min/Max 18/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 28886 - # 2 Short offline Completed without error 00% 28862 - # 3 Short offline Completed without error 00% 28838 - # 4 Short offline Completed without error 00% 28814 - # 5 Short offline Completed without error 00% 28790 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 27/44 Celsius Lifetime Min/Max Temperature: 18/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (57) Index Estimated Time Temperature Celsius 58 2023-05-27 19:04 42 *********************** 59 2023-05-27 19:05 42 *********************** 60 2023-05-27 19:06 42 *********************** 61 2023-05-27 19:07 41 ********************** 62 2023-05-27 19:08 42 *********************** 63 2023-05-27 19:09 42 *********************** 64 2023-05-27 19:10 41 ********************** ... ..(120 skipped). .. ********************** 57 2023-05-27 21:11 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 460 --- Lifetime Power-On Resets 0x01 0x010 4 28904 --- Power-on Hours 0x01 0x018 6 2260243532 --- Logical Sectors Written 0x01 0x020 6 39115009 --- Number of Write Commands 0x01 0x028 6 1049384764156 --- Logical Sectors Read 0x01 0x030 6 24425386 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 28898 --- Spindle Motor Power-on Hours 0x03 0x010 4 28898 --- Head Flying Hours 0x03 0x018 4 530 --- Head Load Events 0x03 0x020 4 2 --- Number of Reallocated Logical Sectors 0x03 0x028 4 51 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 499 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x010 1 38 N-- Average Short Term Temperature 0x05 0x018 1 36 N-- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 45 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 42 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2353 --- Number of Hardware Resets 0x06 0x010 4 870 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub