/dev/sda === START OF INFORMATION SECTION === Device Model: HGST HEJ423220H9E300 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: F62OA180 User Capacity: 200,049,647,616 bytes [200 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 4260 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Mar 30 14:02:08 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 155 100 040 - 225 3 Spin_Up_Time POS--- 253 100 033 - 0 4 Start_Stop_Count -O--C- 100 100 000 - 383 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 106 100 040 - 42 9 Power_On_Hours -O--C- 100 100 000 - 1559749 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 319 191 G-Sense_Error_Rate -O-R-- 100 098 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 193 Load_Cycle_Count -O--C- 099 099 000 - 16359 194 Temperature_Celsius -O---- 100 088 000 - 38 (Min/Max 6/52) 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 200 Multi_Zone_Error_Rate PO--C- 100 100 050 - 0 220 Disk_Shift -OS--K 100 100 000 - 86086 222 Loaded_Hours -O--C- 100 100 000 - 1149297 223 Load_Retry_Count -O-R-- 100 100 000 - 0 226 Load-in_Time POS--- 163 100 040 - 214751641601 231 Temperature_Celsius -O---K 100 088 000 - 25773211686 251 Unknown_Attribute -O---K 100 100 000 - 0 252 Unknown_Attribute -O--CK 001 001 000 - 3758096656 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 38/38 Celsius Lifetime Min/Max Temperature: 6/52 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (110) Index Estimated Time Temperature Celsius 111 2020-03-30 11:55 32 ************* ... ..( 11 skipped). .. ************* 123 2020-03-30 12:07 32 ************* 124 2020-03-30 12:08 ? - 125 2020-03-30 12:09 33 ************** 126 2020-03-30 12:10 33 ************** 127 2020-03-30 12:11 34 *************** ... ..( 10 skipped). .. *************** 10 2020-03-30 12:22 34 *************** 11 2020-03-30 12:23 35 **************** 12 2020-03-30 12:24 34 *************** 13 2020-03-30 12:25 35 **************** ... ..( 22 skipped). .. **************** 36 2020-03-30 12:48 35 **************** 37 2020-03-30 12:49 36 ***************** ... ..( 20 skipped). .. ***************** 58 2020-03-30 13:10 36 ***************** 59 2020-03-30 13:11 37 ****************** 60 2020-03-30 13:12 36 ***************** 61 2020-03-30 13:13 37 ****************** 62 2020-03-30 13:14 37 ****************** 63 2020-03-30 13:15 36 ***************** ... ..( 8 skipped). .. ***************** 72 2020-03-30 13:24 36 ***************** 73 2020-03-30 13:25 35 **************** ... ..( 5 skipped). .. **************** 79 2020-03-30 13:31 35 **************** 80 2020-03-30 13:32 36 ***************** ... ..( 6 skipped). .. ***************** 87 2020-03-30 13:39 36 ***************** 88 2020-03-30 13:40 35 **************** ... ..( 7 skipped). .. **************** 96 2020-03-30 13:48 35 **************** 97 2020-03-30 13:49 36 ***************** 98 2020-03-30 13:50 36 ***************** 99 2020-03-30 13:51 37 ****************** ... ..( 3 skipped). .. ****************** 103 2020-03-30 13:55 37 ****************** 104 2020-03-30 13:56 38 ******************* 105 2020-03-30 13:57 ? - 106 2020-03-30 13:58 38 ******************* ... ..( 3 skipped). .. ******************* 110 2020-03-30 14:02 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS