/dev/sda smartctl 7.1 2019-12-30 r5022 [i686-linux-4.15.0-desktop-122.124.1rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black Device Model: WDC WD2500BEKT-60A25T1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 03.01A03 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Mar 30 16:46:40 2021 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5160) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x703f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 64 3 Spin_Up_Time POS--K 143 141 021 - 1808 4 Start_Stop_Count -O--CK 095 095 000 - 5906 5 Reallocated_Sector_Ct PO--CK 198 198 140 - 14 7 Seek_Error_Rate POSR-K 100 253 051 - 0 9 Power_On_Hours -O--CK 091 091 000 - 6678 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5862 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 057 000 - 64 188 Command_Timeout -O--CK 100 090 000 - 39 190 Airflow_Temperature_Cel -O---K 067 046 040 - 33 (Min/Max 21/34) 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1577 192 Power-Off_Retract_Count -O--CK 200 200 000 - 730 193 Load_Cycle_Count -O--CK 150 150 000 - 151185 194 Temperature_Celsius -O---K 110 089 000 - 33 196 Reallocated_Event_Count -O--CK 198 198 000 - 2 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 64 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 64 [15] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 04 91 79 50 e0 00 Error: UNC 8 sectors at LBA = 0x04917950 = 76642640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 04 91 79 50 e0 00 00:15:39.676 READ DMA EXT 35 00 00 00 48 00 00 02 5d 35 38 e0 00 00:15:39.676 WRITE DMA EXT 25 00 00 01 00 00 00 01 91 a7 d0 e0 00 00:15:39.674 READ DMA EXT 25 00 00 01 00 00 00 01 91 a6 d0 e0 00 00:15:39.673 READ DMA EXT 25 00 00 01 00 00 00 01 91 a5 d0 e0 00 00:15:39.672 READ DMA EXT Error 63 [14] occurred at disk power-on lifetime: 6639 hours (276 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 04 91 79 40 e0 00 Error: UNC 32 sectors at LBA = 0x04917940 = 76642624 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 04 91 79 40 e0 00 00:15:37.667 READ DMA EXT 35 00 00 00 08 00 00 02 b3 36 70 e0 00 00:15:37.667 WRITE DMA EXT 25 00 00 01 00 00 00 01 91 77 d0 e0 00 00:15:37.665 READ DMA EXT 25 00 00 01 00 00 00 01 91 76 d0 e0 00 00:15:37.664 READ DMA EXT 25 00 00 01 00 00 00 01 91 75 d0 e0 00 00:15:37.663 READ DMA EXT Error 62 [13] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 04 91 79 57 40 00 Error: UNC at LBA = 0x04917957 = 76642647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:14.220 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:12.380 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:10.532 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:08.684 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT Error 61 [12] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 04 91 79 57 40 00 Error: UNC at LBA = 0x04917957 = 76642647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:12.380 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:10.532 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:08.684 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 56 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT Error 60 [11] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 04 91 79 57 40 00 Error: UNC at LBA = 0x04917957 = 76642647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:10.532 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:08.684 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 56 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:04.987 READ VERIFY SECTOR(S) EXT Error 59 [10] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 04 91 79 57 40 00 Error: UNC at LBA = 0x04917957 = 76642647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:08.684 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 56 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:04.987 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:03.148 READ VERIFY SECTOR(S) EXT Error 58 [9] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 04 91 79 57 40 00 Error: UNC at LBA = 0x04917957 = 76642647 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 01 00 00 04 91 79 57 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 01 00 00 04 91 79 56 40 00 00:21:06.836 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:04.987 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:03.148 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:01.299 READ VERIFY SECTOR(S) EXT Error 57 [8] occurred at disk power-on lifetime: 6623 hours (275 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 02 00 00 04 91 79 56 40 00 Error: UNC at LBA = 0x04917956 = 76642646 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:04.987 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:03.148 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:21:01.299 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:20:59.385 READ VERIFY SECTOR(S) EXT 42 00 00 00 02 00 00 04 91 79 56 40 00 00:20:57.497 READ VERIFY SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 21/33 Celsius Lifetime Min/Max Temperature: 32/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 54 2021-03-30 14:39 30 *********** 55 2021-03-30 14:40 30 *********** 56 2021-03-30 14:41 30 *********** 57 2021-03-30 14:42 31 ************ 58 2021-03-30 14:43 31 ************ 59 2021-03-30 14:44 31 ************ 60 2021-03-30 14:45 32 ************* 61 2021-03-30 14:46 33 ************** 62 2021-03-30 14:47 33 ************** 63 2021-03-30 14:48 34 *************** 64 2021-03-30 14:49 35 **************** 65 2021-03-30 14:50 35 **************** 66 2021-03-30 14:51 35 **************** 67 2021-03-30 14:52 ? - 68 2021-03-30 14:53 22 *** 69 2021-03-30 14:54 22 *** 70 2021-03-30 14:55 24 ***** 71 2021-03-30 14:56 24 ***** 72 2021-03-30 14:57 24 ***** 73 2021-03-30 14:58 25 ****** 74 2021-03-30 14:59 26 ******* 75 2021-03-30 15:00 26 ******* 76 2021-03-30 15:01 26 ******* 77 2021-03-30 15:02 27 ******** 78 2021-03-30 15:03 28 ********* 79 2021-03-30 15:04 28 ********* 80 2021-03-30 15:05 28 ********* 81 2021-03-30 15:06 29 ********** 82 2021-03-30 15:07 29 ********** 83 2021-03-30 15:08 29 ********** 84 2021-03-30 15:09 30 *********** 85 2021-03-30 15:10 31 ************ ... ..( 3 skipped). .. ************ 89 2021-03-30 15:14 31 ************ 90 2021-03-30 15:15 32 ************* 91 2021-03-30 15:16 32 ************* 92 2021-03-30 15:17 33 ************** ... ..( 2 skipped). .. ************** 95 2021-03-30 15:20 33 ************** 96 2021-03-30 15:21 34 *************** 97 2021-03-30 15:22 34 *************** 98 2021-03-30 15:23 35 **************** 99 2021-03-30 15:24 36 ***************** ... ..( 2 skipped). .. ***************** 102 2021-03-30 15:27 36 ***************** 103 2021-03-30 15:28 37 ****************** 104 2021-03-30 15:29 38 ******************* 105 2021-03-30 15:30 38 ******************* 106 2021-03-30 15:31 39 ******************** 107 2021-03-30 15:32 39 ******************** 108 2021-03-30 15:33 39 ******************** 109 2021-03-30 15:34 40 ********************* ... ..( 7 skipped). .. ********************* 117 2021-03-30 15:42 40 ********************* 118 2021-03-30 15:43 39 ******************** ... ..( 2 skipped). .. ******************** 121 2021-03-30 15:46 39 ******************** 122 2021-03-30 15:47 38 ******************* 123 2021-03-30 15:48 38 ******************* 124 2021-03-30 15:49 38 ******************* 125 2021-03-30 15:50 39 ******************** ... ..( 11 skipped). .. ******************** 9 2021-03-30 16:02 39 ******************** 10 2021-03-30 16:03 40 ********************* 11 2021-03-30 16:04 40 ********************* 12 2021-03-30 16:05 ? - 13 2021-03-30 16:06 24 ***** 14 2021-03-30 16:07 25 ****** 15 2021-03-30 16:08 26 ******* 16 2021-03-30 16:09 27 ******** 17 2021-03-30 16:10 28 ********* 18 2021-03-30 16:11 29 ********** 19 2021-03-30 16:12 29 ********** 20 2021-03-30 16:13 29 ********** 21 2021-03-30 16:14 30 *********** 22 2021-03-30 16:15 30 *********** 23 2021-03-30 16:16 30 *********** 24 2021-03-30 16:17 32 ************* 25 2021-03-30 16:18 33 ************** 26 2021-03-30 16:19 34 *************** 27 2021-03-30 16:20 ? - 28 2021-03-30 16:21 21 ** 29 2021-03-30 16:22 22 *** 30 2021-03-30 16:23 23 **** 31 2021-03-30 16:24 24 ***** 32 2021-03-30 16:25 26 ******* 33 2021-03-30 16:26 26 ******* 34 2021-03-30 16:27 27 ******** 35 2021-03-30 16:28 27 ******** 36 2021-03-30 16:29 28 ********* 37 2021-03-30 16:30 28 ********* 38 2021-03-30 16:31 29 ********** 39 2021-03-30 16:32 29 ********** 40 2021-03-30 16:33 30 *********** 41 2021-03-30 16:34 31 ************ ... ..( 3 skipped). .. ************ 45 2021-03-30 16:38 31 ************ 46 2021-03-30 16:39 32 ************* 47 2021-03-30 16:40 32 ************* 48 2021-03-30 16:41 33 ************** 49 2021-03-30 16:42 33 ************** 50 2021-03-30 16:43 32 ************* 51 2021-03-30 16:44 33 ************** 52 2021-03-30 16:45 33 ************** 53 2021-03-30 16:46 33 ************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1529 Vendor specific