/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.5.6-arch2-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD10SPZX-24Z10T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 12 15:10:22 2023 HKT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2580) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 102) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 193 181 021 - 1350 4 Start_Stop_Count -O--CK 075 075 000 - 25788 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 084 084 000 - 11736 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5965 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1265 193 Load_Cycle_Count -O--CK 183 183 000 - 52760 194 Temperature_Celsius -O---K 107 087 000 - 36 (Min/Max 1/56) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 206 Flying_Height -O---K 125 000 000 - 29 240 Head_Flying_Hours -O--CK 085 085 000 - 11487 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 277 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9700 - # 2 Short offline Completed without error 00% 7642 - # 3 Short offline Completed without error 00% 7634 - # 4 Short offline Completed without error 00% 6002 - # 5 Short offline Completed without error 00% 5994 - # 6 Short offline Completed without error 00% 5978 - # 7 Short offline Completed without error 00% 5963 - # 8 Short offline Completed without error 00% 5958 - # 9 Short offline Completed without error 00% 5873 - #10 Short offline Completed without error 00% 5794 - #11 Vendor (0x50) Completed without error 00% 15 - #12 Short offline Completed without error 00% 15 - #13 Vendor (0x50) Aborted by host 10% 14 - #14 Short offline Completed without error 00% 14 - #15 Vendor (0x50) Completed without error 00% 14 - #16 Short offline Completed without error 00% 14 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 25/37 Celsius Lifetime Min/Max Temperature: 1/56 Celsius Specified Max Operating Temperature: 32 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (108) Index Estimated Time Temperature Celsius 109 2023-10-12 13:03 34 *************** ... ..( 2 skipped). .. *************** 112 2023-10-12 13:06 34 *************** 113 2023-10-12 13:07 33 ************** ... ..( 7 skipped). .. ************** 121 2023-10-12 13:15 33 ************** 122 2023-10-12 13:16 32 ************* 123 2023-10-12 13:17 32 ************* 124 2023-10-12 13:18 32 ************* 125 2023-10-12 13:19 33 ************** 126 2023-10-12 13:20 ? - 127 2023-10-12 13:21 33 ************** ... ..( 8 skipped). .. ************** 8 2023-10-12 13:30 33 ************** 9 2023-10-12 13:31 ? - 10 2023-10-12 13:32 33 ************** ... ..( 2 skipped). .. ************** 13 2023-10-12 13:35 33 ************** 14 2023-10-12 13:36 34 *************** 15 2023-10-12 13:37 34 *************** 16 2023-10-12 13:38 34 *************** 17 2023-10-12 13:39 ? - 18 2023-10-12 13:40 34 *************** ... ..( 19 skipped). .. *************** 38 2023-10-12 14:00 34 *************** 39 2023-10-12 14:01 35 **************** 40 2023-10-12 14:02 35 **************** 41 2023-10-12 14:03 35 **************** 42 2023-10-12 14:04 ? - 43 2023-10-12 14:05 25 ****** 44 2023-10-12 14:06 25 ****** 45 2023-10-12 14:07 27 ******** 46 2023-10-12 14:08 27 ******** 47 2023-10-12 14:09 28 ********* 48 2023-10-12 14:10 29 ********** 49 2023-10-12 14:11 29 ********** 50 2023-10-12 14:12 30 *********** 51 2023-10-12 14:13 30 *********** 52 2023-10-12 14:14 31 ************ 53 2023-10-12 14:15 31 ************ 54 2023-10-12 14:16 32 ************* 55 2023-10-12 14:17 ? - 56 2023-10-12 14:18 32 ************* 57 2023-10-12 14:19 32 ************* 58 2023-10-12 14:20 33 ************** 59 2023-10-12 14:21 33 ************** 60 2023-10-12 14:22 ? - 61 2023-10-12 14:23 33 ************** 62 2023-10-12 14:24 34 *************** ... ..( 2 skipped). .. *************** 65 2023-10-12 14:27 34 *************** 66 2023-10-12 14:28 35 **************** 67 2023-10-12 14:29 ? - 68 2023-10-12 14:30 35 **************** ... ..( 4 skipped). .. **************** 73 2023-10-12 14:35 35 **************** 74 2023-10-12 14:36 ? - 75 2023-10-12 14:37 36 ***************** ... ..( 7 skipped). .. ***************** 83 2023-10-12 14:45 36 ***************** 84 2023-10-12 14:46 35 **************** ... ..( 3 skipped). .. **************** 88 2023-10-12 14:50 35 **************** 89 2023-10-12 14:51 36 ***************** ... ..( 4 skipped). .. ***************** 94 2023-10-12 14:56 36 ***************** 95 2023-10-12 14:57 37 ****************** ... ..( 2 skipped). .. ****************** 98 2023-10-12 15:00 37 ****************** 99 2023-10-12 15:01 ? - 100 2023-10-12 15:02 37 ****************** 101 2023-10-12 15:03 36 ***************** ... ..( 6 skipped). .. ***************** 108 2023-10-12 15:10 36 ***************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 28 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 30 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3576 Vendor specific