/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.5-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT01B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Sep 2 22:14:50 2020 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 9863 12 Power_Cycle_Count -O--CK 099 099 000 - 260 177 Wear_Leveling_Count PO--C- 097 097 000 - 31 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 070 038 000 - 30 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 106 241 Total_LBAs_Written -O--CK 099 099 000 - 18232101450 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9490 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 29/40 Celsius Lifetime Min/Max Temperature: 18/62 Celsius Specified Max Operating Temperature: 55 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (44) Index Estimated Time Temperature Celsius 45 2020-09-02 01:00 31 ************ 46 2020-09-02 01:10 31 ************ 47 2020-09-02 01:20 31 ************ 48 2020-09-02 01:30 32 ************* 49 2020-09-02 01:40 32 ************* 50 2020-09-02 01:50 31 ************ 51 2020-09-02 02:00 31 ************ 52 2020-09-02 02:10 32 ************* ... ..( 10 skipped). .. ************* 63 2020-09-02 04:00 32 ************* 64 2020-09-02 04:10 33 ************** 65 2020-09-02 04:20 33 ************** 66 2020-09-02 04:30 32 ************* 67 2020-09-02 04:40 32 ************* 68 2020-09-02 04:50 33 ************** ... ..( 2 skipped). .. ************** 71 2020-09-02 05:20 33 ************** 72 2020-09-02 05:30 32 ************* 73 2020-09-02 05:40 32 ************* 74 2020-09-02 05:50 33 ************** 75 2020-09-02 06:00 33 ************** 76 2020-09-02 06:10 35 **************** 77 2020-09-02 06:20 34 *************** 78 2020-09-02 06:30 33 ************** 79 2020-09-02 06:40 33 ************** 80 2020-09-02 06:50 33 ************** 81 2020-09-02 07:00 34 *************** ... ..( 7 skipped). .. *************** 89 2020-09-02 08:20 34 *************** 90 2020-09-02 08:30 33 ************** ... ..( 13 skipped). .. ************** 104 2020-09-02 10:50 33 ************** 105 2020-09-02 11:00 34 *************** 106 2020-09-02 11:10 33 ************** 107 2020-09-02 11:20 ? - 108 2020-09-02 11:30 23 **** 109 2020-09-02 11:40 25 ****** 110 2020-09-02 11:50 27 ******** 111 2020-09-02 12:00 27 ******** 112 2020-09-02 12:10 28 ********* 113 2020-09-02 12:20 28 ********* 114 2020-09-02 12:30 28 ********* 115 2020-09-02 12:40 30 *********** 116 2020-09-02 12:50 29 ********** 117 2020-09-02 13:00 29 ********** 118 2020-09-02 13:10 31 ************ 119 2020-09-02 13:20 30 *********** ... ..( 9 skipped). .. *********** 1 2020-09-02 15:00 30 *********** 2 2020-09-02 15:10 31 ************ 3 2020-09-02 15:20 31 ************ 4 2020-09-02 15:30 31 ************ 5 2020-09-02 15:40 32 ************* 6 2020-09-02 15:50 31 ************ ... ..( 4 skipped). .. ************ 11 2020-09-02 16:40 31 ************ 12 2020-09-02 16:50 33 ************** 13 2020-09-02 17:00 32 ************* ... ..( 4 skipped). .. ************* 18 2020-09-02 17:50 32 ************* 19 2020-09-02 18:00 35 **************** 20 2020-09-02 18:10 33 ************** 21 2020-09-02 18:20 32 ************* ... ..( 7 skipped). .. ************* 29 2020-09-02 19:40 32 ************* 30 2020-09-02 19:50 33 ************** 31 2020-09-02 20:00 34 *************** 32 2020-09-02 20:10 33 ************** 33 2020-09-02 20:20 32 ************* ... ..( 5 skipped). .. ************* 39 2020-09-02 21:20 32 ************* 40 2020-09-02 21:30 33 ************** 41 2020-09-02 21:40 33 ************** 42 2020-09-02 21:50 33 ************** 43 2020-09-02 22:00 ? - 44 2020-09-02 22:10 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 260 --- Lifetime Power-On Resets 0x01 0x010 4 9863 --- Power-on Hours 0x01 0x018 6 18232101450 --- Logical Sectors Written 0x01 0x020 6 369921355 --- Number of Write Commands 0x01 0x028 6 14903405759 --- Logical Sectors Read 0x01 0x030 6 66111489 --- Number of Read Commands 0x01 0x038 6 3202000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 30 --- Current Temperature 0x05 0x020 1 62 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 925 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC