/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint T166 Device Model: SAMSUNG HD321KJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: CP100-12 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3b SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Thu Nov 22 23:15:22 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdb === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint M7E (AF) Device Model: SAMSUNG HM321HI Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 2AJ10002 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Nov 22 23:15:22 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4980) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 83) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 43 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 084 025 - 3410 4 Start_Stop_Count -O--CK 093 093 000 - 7829 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 7440 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 097 097 000 - 3603 12 Power_Cycle_Count -O--CK 094 094 000 - 6536 191 G-Sense_Error_Rate -O---K 079 079 000 - 213487 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 052 000 - 34 (Min/Max 8/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 6292 223 Load_Retry_Count -O--CK 097 097 000 - 3603 225 Load_Cycle_Count -O--CK 086 086 000 - 142179 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 22 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 22 [5] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 31 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa31 = 625146417 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT Error 21 [4] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 31 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa31 = 625146417 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.196 WRITE DMA EXT Error 20 [3] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 31 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa31 = 625146417 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.197 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.197 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.196 WRITE DMA EXT 25 00 00 00 01 00 00 08 c2 db 2d e0 00 00:00:03.196 READ DMA EXT Error 19 [2] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 31 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa31 = 625146417 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 31 e0 00 00:00:03.196 WRITE DMA EXT 25 00 00 00 01 00 00 08 c2 db 2d e0 00 00:00:03.196 READ DMA EXT 35 00 00 00 01 00 00 08 c2 db 2d e0 00 00:00:03.196 WRITE DMA EXT 25 00 00 00 01 00 00 08 c2 db 2d e0 00 00:00:03.196 READ DMA EXT 35 00 00 00 08 00 00 09 22 db 25 e0 00 00:00:03.196 WRITE DMA EXT Error 18 [1] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 14 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa14 = 625146388 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 14 e0 00 00:00:03.181 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 14 e0 00 00:00:03.181 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.181 WRITE DMA EXT Error 17 [0] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 14 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa14 = 625146388 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 14 e0 00 00:00:03.181 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.181 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.180 WRITE DMA EXT Error 16 [7] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 13 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa13 = 625146387 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.181 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.181 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.180 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 12 e0 00 00:00:03.180 WRITE DMA EXT Error 15 [6] occurred at disk power-on lifetime: 90 hours (3 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 01 00 00 25 42 fa 13 e0 00 Error: IDNF 1 sectors at LBA = 0x2542fa13 = 625146387 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 01 00 00 25 42 fa 13 e0 00 00:00:03.180 WRITE DMA EXT 35 00 00 00 01 00 00 25 42 fa 12 e0 00 00:00:03.180 WRITE DMA EXT 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.180 NOP [Abort queued commands] 00 00 00 00 01 00 00 00 00 00 01 40 00 00:00:03.180 NOP [Abort queued commands] 35 00 00 00 01 00 00 25 42 fa 12 e0 00 00:00:03.180 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 32/37 Celsius Lifetime Min/Max Temperature: 8/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (92) Index Estimated Time Temperature Celsius 93 2018-11-22 12:40 34 *************** 94 2018-11-22 12:45 32 ************* 95 2018-11-22 12:50 33 ************** ... ..( 23 skipped). .. ************** 119 2018-11-22 14:50 33 ************** 120 2018-11-22 14:55 32 ************* 121 2018-11-22 15:00 33 ************** ... ..( 4 skipped). .. ************** 126 2018-11-22 15:25 33 ************** 127 2018-11-22 15:30 32 ************* 0 2018-11-22 15:35 33 ************** ... ..( 4 skipped). .. ************** 5 2018-11-22 16:00 33 ************** 6 2018-11-22 16:05 35 **************** ... ..( 2 skipped). .. **************** 9 2018-11-22 16:20 35 **************** 10 2018-11-22 16:25 34 *************** ... ..( 8 skipped). .. *************** 19 2018-11-22 17:10 34 *************** 20 2018-11-22 17:15 35 **************** 21 2018-11-22 17:20 36 ***************** ... ..( 2 skipped). .. ***************** 24 2018-11-22 17:35 36 ***************** 25 2018-11-22 17:40 37 ****************** 26 2018-11-22 17:45 36 ***************** 27 2018-11-22 17:50 37 ****************** 28 2018-11-22 17:55 36 ***************** 29 2018-11-22 18:00 36 ***************** 30 2018-11-22 18:05 36 ***************** 31 2018-11-22 18:10 33 ************** 32 2018-11-22 18:15 33 ************** 33 2018-11-22 18:20 34 *************** 34 2018-11-22 18:25 34 *************** 35 2018-11-22 18:30 33 ************** 36 2018-11-22 18:35 34 *************** ... ..( 3 skipped). .. *************** 40 2018-11-22 18:55 34 *************** 41 2018-11-22 19:00 33 ************** ... ..( 2 skipped). .. ************** 44 2018-11-22 19:15 33 ************** 45 2018-11-22 19:20 34 *************** 46 2018-11-22 19:25 34 *************** 47 2018-11-22 19:30 34 *************** 48 2018-11-22 19:35 33 ************** 49 2018-11-22 19:40 34 *************** 50 2018-11-22 19:45 33 ************** 51 2018-11-22 19:50 33 ************** 52 2018-11-22 19:55 32 ************* 53 2018-11-22 20:00 33 ************** 54 2018-11-22 20:05 34 *************** 55 2018-11-22 20:10 34 *************** 56 2018-11-22 20:15 35 **************** ... ..( 3 skipped). .. **************** 60 2018-11-22 20:35 35 **************** 61 2018-11-22 20:40 34 *************** 62 2018-11-22 20:45 34 *************** 63 2018-11-22 20:50 34 *************** 64 2018-11-22 20:55 35 **************** 65 2018-11-22 21:00 35 **************** 66 2018-11-22 21:05 35 **************** 67 2018-11-22 21:10 34 *************** ... ..( 7 skipped). .. *************** 75 2018-11-22 21:50 34 *************** 76 2018-11-22 21:55 35 **************** 77 2018-11-22 22:00 35 **************** 78 2018-11-22 22:05 36 ***************** ... ..( 5 skipped). .. ***************** 84 2018-11-22 22:35 36 ***************** 85 2018-11-22 22:40 35 **************** 86 2018-11-22 22:45 34 *************** 87 2018-11-22 22:50 35 **************** 88 2018-11-22 22:55 35 **************** 89 2018-11-22 23:00 34 *************** ... ..( 2 skipped). .. *************** 92 2018-11-22 23:15 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 47 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 69 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific