Probe #b222dbff7d of Dell Inspiron 7520

Log: smartctl

/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.4-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSD 240GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HT3618C1 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Unavailable Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 4 11:38:06 2024 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 4) minutes. Extended self-test routine recommended polling time: ( 8) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 409 12 Power_Cycle_Count -O--CK 100 100 050 - 148 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 25444 163 Unknown_Attribute -O--CK 100 100 050 - 84 164 Unknown_Attribute -O--CK 100 100 050 - 21 165 Unknown_Attribute -O--CK 100 100 050 - 409 166 Unknown_Attribute -O--CK 100 100 050 - 4 167 Unknown_Attribute -O--CK 100 100 050 - 111 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 393217 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 3104673 177 Wear_Leveling_Count -O--CK 100 100 050 - 4453021 178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 90 194 Temperature_Celsius -O--CK 100 100 050 - 40 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 48266 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 2 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 78904 242 Total_LBAs_Read -O--CK 100 100 050 - 77892 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 102 hours (4 days + 6 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 00 00 01 45 00 47 00 00 00 at LBA = 0x145004700 = 5452613376 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 01 45 00 47 00 40 00 00:00:17.070 READ FPDMA QUEUED 60 00 80 00 08 00 01 44 00 47 80 40 00 00:00:17.070 READ FPDMA QUEUED 60 00 80 00 00 00 01 44 00 47 00 40 00 00:00:17.070 READ FPDMA QUEUED 60 00 80 00 08 00 01 43 00 47 80 40 00 00:00:17.070 READ FPDMA QUEUED 60 00 80 00 00 00 01 43 00 47 00 40 00 00:00:17.070 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 10 hours (0 days + 10 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 40 00 40 00 00 13 00 65 c0 51 00 64 sectors at LBA = 0x130065c0 = 318793152 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 13 00 65 c0 40 00 00:01:08.410 READ DMA EXT 25 00 00 00 16 00 01 39 00 28 d8 40 00 00:01:08.410 READ DMA EXT 25 00 00 00 14 00 00 d9 00 87 58 40 00 00:01:08.400 READ DMA EXT 25 00 00 00 14 00 01 39 00 28 b8 40 00 00:01:08.400 READ DMA EXT 25 00 00 00 40 00 03 60 00 7c c0 40 00 00:01:08.400 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Self-test routine in progress 100% 53 - # 2 Offline Self-test routine in progress 100% 53 - # 3 Offline Self-test routine in progress 100% 53 - # 4 Offline Self-test routine in progress 100% 53 - # 5 Offline Self-test routine in progress 100% 53 - # 6 Offline Self-test routine in progress 100% 53 - # 7 Offline Self-test routine in progress 100% 53 - # 8 Offline Self-test routine in progress 100% 53 - # 9 Offline Self-test routine in progress 100% 53 - #10 Offline Self-test routine in progress 100% 53 - #11 Offline Self-test routine in progress 100% 53 - #12 Offline Self-test routine in progress 100% 53 - #13 Offline Self-test routine in progress 100% 53 - #14 Offline Self-test routine in progress 100% 53 - #15 Offline Self-test routine in progress 100% 53 - #16 Offline Self-test routine in progress 100% 53 - #17 Offline Self-test routine in progress 100% 53 - #18 Offline Self-test routine in progress 100% 53 - #19 Offline Self-test routine in progress 100% 53 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 148 --- Lifetime Power-On Resets 0x01 0x010 4 409 --- Power-on Hours 0x01 0x018 6 5171052544 --- Logical Sectors Written 0x01 0x020 6 55791465 --- Number of Write Commands 0x01 0x028 6 5104730112 --- Logical Sectors Read 0x01 0x030 6 72292182 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 1873 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1617 Device-to-host register FISes sent due to a COMRESET 0x000b 2 2 CRC errors within host-to-device FIS 0x000d 2 2 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.4-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR20003 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 1.5 Gb/s) Local Time is: Fri Oct 4 11:38:06 2024 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13020) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 217) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 37 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3465 4 Start_Stop_Count -O--CK 094 094 000 - 6206 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 17370 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 505 12 Power_Cycle_Count -O--CK 095 095 000 - 5740 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O---K 098 098 000 - 57368158 191 G-Sense_Error_Rate -O---K 100 100 000 - 1546 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 086 086 000 - 141718 194 Temperature_Celsius -O---- 064 029 000 - 31 (Min/Max 16/72) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 636 240 Head_Flying_Hours -O--CK 100 100 000 - 17090 241 Total_LBAs_Written -O--CK 095 088 000 - 7946092 242 Total_LBAs_Read -O--CK 095 088 000 - 7131163 254 Free_Fall_Sensor -O--CK 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16397 - # 2 Short offline Completed without error 00% 15910 - # 3 Short offline Completed without error 00% 15760 - # 4 Short offline Aborted by host 80% 15175 - # 5 Short offline Completed without error 00% 14837 - # 6 Short offline Aborted by host 70% 14807 - # 7 Short offline Completed without error 00% 9519 - # 8 Short offline Completed without error 00% 9010 - # 9 Short offline Completed without error 00% 8070 - #10 Short offline Completed without error 00% 7230 - #11 Short offline Completed without error 00% 6813 - #12 Short offline Completed without error 00% 5780 - #13 Short offline Completed without error 00% 4639 - #14 Short offline Completed without error 00% 4224 - #15 Short offline Completed without error 00% 2677 - #16 Short offline Completed without error 00% 1649 - #17 Short offline Completed without error 00% 211 - #18 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 29/35 Celsius Lifetime Min/Max Temperature: 16/70 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (22) Index Estimated Time Temperature Celsius 23 2024-10-04 01:00 31 ************ 24 2024-10-04 01:05 34 *************** ... ..( 43 skipped). .. *************** 68 2024-10-04 04:45 34 *************** 69 2024-10-04 04:50 33 ************** ... ..( 18 skipped). .. ************** 88 2024-10-04 06:25 33 ************** 89 2024-10-04 06:30 34 *************** 90 2024-10-04 06:35 33 ************** 91 2024-10-04 06:40 34 *************** ... ..( 6 skipped). .. *************** 98 2024-10-04 07:15 34 *************** 99 2024-10-04 07:20 31 ************ 100 2024-10-04 07:25 33 ************** 101 2024-10-04 07:30 34 *************** 102 2024-10-04 07:35 35 **************** 103 2024-10-04 07:40 36 ***************** 104 2024-10-04 07:45 34 *************** 105 2024-10-04 07:50 35 **************** ... ..( 2 skipped). .. **************** 108 2024-10-04 08:05 35 **************** 109 2024-10-04 08:10 36 ***************** ... ..( 3 skipped). .. ***************** 113 2024-10-04 08:30 36 ***************** 114 2024-10-04 08:35 34 *************** ... ..( 2 skipped). .. *************** 117 2024-10-04 08:50 34 *************** 118 2024-10-04 08:55 35 **************** 119 2024-10-04 09:00 35 **************** 120 2024-10-04 09:05 32 ************* 121 2024-10-04 09:10 31 ************ 122 2024-10-04 09:15 32 ************* 123 2024-10-04 09:20 33 ************** ... ..( 3 skipped). .. ************** 127 2024-10-04 09:40 33 ************** 0 2024-10-04 09:45 29 ********** 1 2024-10-04 09:50 30 *********** 2 2024-10-04 09:55 31 ************ 3 2024-10-04 10:00 31 ************ 4 2024-10-04 10:05 32 ************* 5 2024-10-04 10:10 32 ************* 6 2024-10-04 10:15 32 ************* 7 2024-10-04 10:20 30 *********** 8 2024-10-04 10:25 31 ************ 9 2024-10-04 10:30 32 ************* 10 2024-10-04 10:35 33 ************** ... ..( 3 skipped). .. ************** 14 2024-10-04 10:55 33 ************** 15 2024-10-04 11:00 34 *************** 16 2024-10-04 11:05 34 *************** 17 2024-10-04 11:10 33 ************** 18 2024-10-04 11:15 33 ************** 19 2024-10-04 11:20 30 *********** 20 2024-10-04 11:25 31 ************ 21 2024-10-04 11:30 30 *********** 22 2024-10-04 11:35 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific


Hardware for Linux and BSD

GitHub