/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: MTFDHBA256TCK-1AS1AABHA Serial Number: -- Firmware Version: HPS0V23 PCI Vendor/Subsystem ID: 0x1344 IEEE OUI Identifier: 0x00a075 Controller ID: 0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00a075 ... Local Time is: Tue Sep 13 12:03:15 2022 BST Firmware Updates (0x02): 1 Slot Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0017): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.25W - - 0 0 0 0 0 0 1 + 2.40W - - 1 1 1 1 0 0 2 + 1.90W - - 2 2 2 2 0 0 3 - 0.0800W - - 3 3 3 3 10000 2500 4 - 0.0050W - - 4 4 4 4 5000 44000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 7% Data Units Read: 3,409,974 [1.74 TB] Data Units Written: 1,049,183 [537 GB] Host Read Commands: 38,982,296 Host Write Commands: 12,382,346 Controller Busy Time: 478 Power Cycles: 1,259 Power On Hours: 297 Unsafe Shutdowns: 72 Media and Data Integrity Errors: 0 Error Information Log Entries: 291 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 39 Celsius Temperature Sensor 2: 42 Celsius Error Information (NVMe Log 0x01, max 256 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-46-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Sep 13 12:03:15 2022 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13380) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 223) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 14 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 085 025 - 4466 4 Start_Stop_Count -O--CK 097 097 000 - 3409 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 14065 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 69 12 Power_Cycle_Count -O--CK 099 099 000 - 1432 191 G-Sense_Error_Rate -O---K 100 100 000 - 9 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 035 000 - 31 (Min/Max 13/65) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1860 223 Load_Retry_Count -O--CK 100 100 000 - 69 225 Load_Cycle_Count -O--CK 084 084 000 - 171058 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 261 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 24/31 Celsius Lifetime Min/Max Temperature: 11/65 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2022-09-13 01:25 31 ************ 17 2022-09-13 01:30 37 ****************** ... ..( 14 skipped). .. ****************** 32 2022-09-13 02:45 37 ****************** 33 2022-09-13 02:50 38 ******************* ... ..( 9 skipped). .. ******************* 43 2022-09-13 03:40 38 ******************* 44 2022-09-13 03:45 37 ****************** ... ..( 4 skipped). .. ****************** 49 2022-09-13 04:10 37 ****************** 50 2022-09-13 04:15 36 ***************** 51 2022-09-13 04:20 35 **************** 52 2022-09-13 04:25 35 **************** 53 2022-09-13 04:30 34 *************** 54 2022-09-13 04:35 34 *************** 55 2022-09-13 04:40 34 *************** 56 2022-09-13 04:45 35 **************** ... ..( 2 skipped). .. **************** 59 2022-09-13 05:00 35 **************** 60 2022-09-13 05:05 36 ***************** ... ..( 12 skipped). .. ***************** 73 2022-09-13 06:10 36 ***************** 74 2022-09-13 06:15 35 **************** ... ..( 21 skipped). .. **************** 96 2022-09-13 08:05 35 **************** 97 2022-09-13 08:10 36 ***************** ... ..( 15 skipped). .. ***************** 113 2022-09-13 09:30 36 ***************** 114 2022-09-13 09:35 37 ****************** 115 2022-09-13 09:40 37 ****************** 116 2022-09-13 09:45 36 ***************** ... ..( 3 skipped). .. ***************** 120 2022-09-13 10:05 36 ***************** 121 2022-09-13 10:10 37 ****************** ... ..( 2 skipped). .. ****************** 124 2022-09-13 10:25 37 ****************** 125 2022-09-13 10:30 36 ***************** 126 2022-09-13 10:35 36 ***************** 127 2022-09-13 10:40 36 ***************** 0 2022-09-13 10:45 37 ****************** 1 2022-09-13 10:50 39 ******************** 2 2022-09-13 10:55 42 *********************** 3 2022-09-13 11:00 41 ********************** 4 2022-09-13 11:05 40 ********************* 5 2022-09-13 11:10 42 *********************** 6 2022-09-13 11:15 44 ************************* 7 2022-09-13 11:20 44 ************************* 8 2022-09-13 11:25 45 ************************** 9 2022-09-13 11:30 38 ******************* ... ..( 3 skipped). .. ******************* 13 2022-09-13 11:50 38 ******************* 14 2022-09-13 11:55 30 *********** 15 2022-09-13 12:00 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific