/dev/sda === START OF INFORMATION SECTION === Device Model: Hitachi HDT721032SLA380 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST0KA36A User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Feb 12 06:44:35 2025 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4710) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 79) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 130 130 054 - 123 3 Spin_Up_Time POS--- 109 109 024 - 223 (Average 235) 4 Start_Stop_Count -O--C- 100 100 000 - 96 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 096 096 000 - 28458 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 91 192 Power-Off_Retract_Count -O--CK 100 100 000 - 749 193 Load_Cycle_Count -O--C- 100 100 000 - 749 194 Temperature_Celsius -O---- 253 253 000 - 18 (Min/Max 9/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 18 Celsius Power Cycle Min/Max Temperature: 15/18 Celsius Lifetime Min/Max Temperature: 9/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (30) Index Estimated Time Temperature Celsius 31 2025-02-12 04:37 38 ******************* 32 2025-02-12 04:38 39 ******************** ... ..( 3 skipped). .. ******************** 36 2025-02-12 04:42 39 ******************** 37 2025-02-12 04:43 40 ********************* ... ..( 4 skipped). .. ********************* 42 2025-02-12 04:48 40 ********************* 43 2025-02-12 04:49 41 ********************** ... ..( 12 skipped). .. ********************** 56 2025-02-12 05:02 41 ********************** 57 2025-02-12 05:03 42 *********************** ... ..( 15 skipped). .. *********************** 73 2025-02-12 05:19 42 *********************** 74 2025-02-12 05:20 41 ********************** ... ..( 3 skipped). .. ********************** 78 2025-02-12 05:24 41 ********************** 79 2025-02-12 05:25 40 ********************* ... ..( 7 skipped). .. ********************* 87 2025-02-12 05:33 40 ********************* 88 2025-02-12 05:34 39 ******************** ... ..( 18 skipped). .. ******************** 107 2025-02-12 05:53 39 ******************** 108 2025-02-12 05:54 38 ******************* 109 2025-02-12 05:55 38 ******************* 110 2025-02-12 05:56 37 ****************** 111 2025-02-12 05:57 37 ****************** 112 2025-02-12 05:58 36 ***************** 113 2025-02-12 05:59 36 ***************** 114 2025-02-12 06:00 35 **************** 115 2025-02-12 06:01 35 **************** 116 2025-02-12 06:02 35 **************** 117 2025-02-12 06:03 34 *************** ... ..( 2 skipped). .. *************** 120 2025-02-12 06:06 34 *************** 121 2025-02-12 06:07 33 ************** 122 2025-02-12 06:08 33 ************** 123 2025-02-12 06:09 ? - 124 2025-02-12 06:10 ? - 125 2025-02-12 06:11 12 - 126 2025-02-12 06:12 ? - 127 2025-02-12 06:13 ? - 0 2025-02-12 06:14 18 - 1 2025-02-12 06:15 ? - 2 2025-02-12 06:16 17 - 3 2025-02-12 06:17 ? - 4 2025-02-12 06:18 20 * 5 2025-02-12 06:19 20 * 6 2025-02-12 06:20 21 ** 7 2025-02-12 06:21 21 ** 8 2025-02-12 06:22 21 ** 9 2025-02-12 06:23 22 *** 10 2025-02-12 06:24 22 *** 11 2025-02-12 06:25 ? - 12 2025-02-12 06:26 23 **** ... ..( 12 skipped). .. **** 25 2025-02-12 06:39 23 **** 26 2025-02-12 06:40 ? - 27 2025-02-12 06:41 15 - 28 2025-02-12 06:42 16 - 29 2025-02-12 06:43 17 - 30 2025-02-12 06:44 18 - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS