/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.8-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD3200AAKS-61L9A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03E01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sun Aug 8 03:36:05 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 73) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 134 133 021 - 4283 4 Start_Stop_Count -O--CK 100 100 000 - 284 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 006 006 000 - 68823 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 283 192 Power-Off_Retract_Count -O--CK 200 200 000 - 153 193 Load_Cycle_Count -O--CK 200 200 000 - 284 194 Temperature_Celsius -O---K 109 085 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 34/34 Celsius Lifetime Min/Max Temperature: 25/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (162) Index Estimated Time Temperature Celsius 163 2021-08-07 19:39 35 **************** ... ..(187 skipped). .. **************** 351 2021-08-07 22:47 35 **************** 352 2021-08-07 22:48 36 ***************** ... ..( 35 skipped). .. ***************** 388 2021-08-07 23:24 36 ***************** 389 2021-08-07 23:25 35 **************** ... ..( 32 skipped). .. **************** 422 2021-08-07 23:58 35 **************** 423 2021-08-07 23:59 ? - 424 2021-08-08 00:00 25 ****** 425 2021-08-08 00:01 25 ****** 426 2021-08-08 00:02 26 ******* 427 2021-08-08 00:03 26 ******* 428 2021-08-08 00:04 27 ******** 429 2021-08-08 00:05 28 ********* 430 2021-08-08 00:06 29 ********** 431 2021-08-08 00:07 29 ********** 432 2021-08-08 00:08 30 *********** ... ..( 2 skipped). .. *********** 435 2021-08-08 00:11 30 *********** 436 2021-08-08 00:12 31 ************ 437 2021-08-08 00:13 31 ************ 438 2021-08-08 00:14 32 ************* 439 2021-08-08 00:15 32 ************* 440 2021-08-08 00:16 ? - 441 2021-08-08 00:17 34 *************** ... ..( 3 skipped). .. *************** 445 2021-08-08 00:21 34 *************** 446 2021-08-08 00:22 35 **************** ... ..(193 skipped). .. **************** 162 2021-08-08 03:36 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 271 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.8-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37120G Serial Number: -- LU WWN Device Id: 5 000000 ... Firmware Version: SBFK71E0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Aug 8 03:36:05 2021 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 099 099 000 - 70 9 Power_On_Hours -O--C- 100 100 000 - 15822 12 Power_Cycle_Count -O--C- 100 100 000 - 769 148 Unknown_Attribute ------ 255 255 000 - 19 149 Unknown_Attribute ------ 255 255 000 - 665 167 Write_Protect_Mode -O---K 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 27 170 Bad_Blk_Ct_Erl/Lat PO--C- 100 100 010 - 0/31 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 214 (Average 197) 181 Program_Fail_Count -O--C- 100 100 000 - 0 182 Erase_Fail_Count ------ 255 255 000 - 5 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 332 194 Temperature_Celsius PO---K 070 054 000 - 30 (Min/Max 4/46) 196 Reallocated_Event_Count ------ 100 100 000 - 5 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count ------ 100 100 000 - 0 231 SSD_Life_Left PO--C- 100 100 000 - 80 233 Flash_Writes_GiB PO--C- 100 100 000 - 17753 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 15232 242 Lifetime_Reads_GiB -O--C- 100 100 000 - 8693 244 Average_Erase_Count ------ 100 100 000 - 197 245 Max_Erase_Count ------ 100 100 000 - 214 246 Total_Erase_Count ------ 100 100 000 - 1121292 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 32 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 32 [31] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT Error 31 [30] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 8f 40 00 00:00:00.000 READ DMA EXT Error 30 [29] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 8f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT Error 29 [28] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT Error 28 [27] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 8f 40 00 00:00:00.000 READ DMA EXT Error 27 [26] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 8f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 04 00 00 00 00 00 80 40 00 00:00:00.000 READ DMA EXT Error 26 [25] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT Error 25 [24] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 00 00 47 a0 40 00 Error: UNC 1 sectors at LBA = 0x000047a0 = 18336 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 a0 40 00 00:00:00.000 READ DMA EXT 35 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 WRITE DMA EXT 25 00 00 00 01 00 00 00 00 47 9f 40 00 00:00:00.000 READ DMA EXT 25 00 00 00 01 00 00 00 00 47 8f 40 00 00:00:00.000 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 769 --- Lifetime Power-On Resets 0x01 0x010 4 15822 --- Power-on Hours 0x01 0x018 6 31945084028 --- Logical Sectors Written 0x01 0x028 6 18232442228 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 70 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 30 --- Current Temperature 0x05 0x020 1 46 --- Highest Temperature 0x05 0x028 1 4 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 19 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC