/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.8-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: XPG GAMMIX S70 BLADE Serial Number: -- Firmware Version: 3.2.F.83 PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x707c18 Controller ID: 0 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 707c18 ... Local Time is: Sun Aug 6 20:28:44 2023 IST Firmware Updates (0x0e): 7 Slots Optional Admin Commands (0x0016): Format Frmw_DL Self_Test Optional NVM Commands (0x0014): DS_Mngmt Sav/Sel_Feat Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 100 Celsius Critical Comp. Temp. Threshold: 110 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 5 5 1 + 3.30W - - 1 1 1 1 50 100 2 + 2.80W - - 2 2 2 2 50 200 3 - 0.1700W - - 3 3 3 3 500 7500 4 - 0.0200W - - 4 4 4 4 2000 70000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 - 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 25% Percentage Used: 0% Data Units Read: 2,116,307 [1.08 TB] Data Units Written: 5,209,489 [2.66 TB] Host Read Commands: 30,862,010 Host Write Commands: 27,751,270 Controller Busy Time: 1 Power Cycles: 151 Power On Hours: 130 Unsafe Shutdowns: 11 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 37 Celsius Read 16 entries from Error Information Log failed: PRP Offset Invalid (0x013) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.8-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD40NMZW-11GX6S1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 4,000,753,475,584 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Aug 6 20:28:44 2023 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1], Master PW ID: 0xbbbb Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13440) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 177) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 2616 4 Start_Stop_Count -O--CK 100 100 000 - 748 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 398 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 534 192 Power-Off_Retract_Count -O--CK 200 200 000 - 365 193 Load_Cycle_Count -O--CK 198 198 000 - 6988 194 Temperature_Celsius -O---K 110 098 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 277 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 81 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xcf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 39/49 Celsius Lifetime Min/Max Temperature: 21/54 Celsius Specified Max Operating Temperature: 37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (117) Index Estimated Time Temperature Celsius 118 2023-08-06 18:21 45 ************************** 119 2023-08-06 18:22 44 ************************* ... ..( 4 skipped). .. ************************* 124 2023-08-06 18:27 44 ************************* 125 2023-08-06 18:28 43 ************************ 126 2023-08-06 18:29 43 ************************ 127 2023-08-06 18:30 43 ************************ 0 2023-08-06 18:31 42 *********************** 1 2023-08-06 18:32 43 ************************ 2 2023-08-06 18:33 43 ************************ 3 2023-08-06 18:34 42 *********************** 4 2023-08-06 18:35 43 ************************ 5 2023-08-06 18:36 42 *********************** ... ..( 9 skipped). .. *********************** 15 2023-08-06 18:46 42 *********************** 16 2023-08-06 18:47 41 ********************** ... ..( 6 skipped). .. ********************** 23 2023-08-06 18:54 41 ********************** 24 2023-08-06 18:55 40 ********************* 25 2023-08-06 18:56 41 ********************** ... ..( 7 skipped). .. ********************** 33 2023-08-06 19:04 41 ********************** 34 2023-08-06 19:05 40 ********************* 35 2023-08-06 19:06 41 ********************** 36 2023-08-06 19:07 40 ********************* ... ..( 21 skipped). .. ********************* 58 2023-08-06 19:29 40 ********************* 59 2023-08-06 19:30 39 ******************** 60 2023-08-06 19:31 40 ********************* ... ..( 4 skipped). .. ********************* 65 2023-08-06 19:36 40 ********************* 66 2023-08-06 19:37 39 ******************** 67 2023-08-06 19:38 40 ********************* ... ..( 6 skipped). .. ********************* 74 2023-08-06 19:45 40 ********************* 75 2023-08-06 19:46 39 ******************** ... ..( 17 skipped). .. ******************** 93 2023-08-06 20:04 39 ******************** 94 2023-08-06 20:05 40 ********************* ... ..( 5 skipped). .. ********************* 100 2023-08-06 20:11 40 ********************* 101 2023-08-06 20:12 41 ********************** ... ..( 9 skipped). .. ********************** 111 2023-08-06 20:22 41 ********************** 112 2023-08-06 20:23 42 *********************** 113 2023-08-06 20:24 41 ********************** 114 2023-08-06 20:25 41 ********************** 115 2023-08-06 20:26 41 ********************** 116 2023-08-06 20:27 42 *********************** 117 2023-08-06 20:28 42 *********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 9533 Vendor specific