/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.17.1-arch1-1] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Apr 4 23:20:34 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13740) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 229) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 6 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 091 025 - 2469 4 Start_Stop_Count -O--CK 093 093 000 - 7413 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1637 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 79 12 Power_Cycle_Count -O--CK 097 097 000 - 3171 191 G-Sense_Error_Rate -O---K 100 100 000 - 723 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 051 000 - 34 (Min/Max 12/49) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 4119 223 Load_Retry_Count -O--CK 100 100 000 - 79 225 Load_Cycle_Count -O--CK 096 096 000 - 46744 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 24/34 Celsius Lifetime Min/Max Temperature: 13/49 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (44) Index Estimated Time Temperature Celsius 45 2022-04-04 12:45 34 *************** 46 2022-04-04 12:50 35 **************** ... ..( 2 skipped). .. **************** 49 2022-04-04 13:05 35 **************** 50 2022-04-04 13:10 34 *************** 51 2022-04-04 13:15 33 ************** 52 2022-04-04 13:20 33 ************** 53 2022-04-04 13:25 34 *************** 54 2022-04-04 13:30 35 **************** 55 2022-04-04 13:35 29 ********** 56 2022-04-04 13:40 31 ************ 57 2022-04-04 13:45 31 ************ 58 2022-04-04 13:50 32 ************* 59 2022-04-04 13:55 33 ************** 60 2022-04-04 14:00 32 ************* 61 2022-04-04 14:05 33 ************** 62 2022-04-04 14:10 34 *************** 63 2022-04-04 14:15 34 *************** 64 2022-04-04 14:20 34 *************** 65 2022-04-04 14:25 35 **************** 66 2022-04-04 14:30 35 **************** 67 2022-04-04 14:35 36 ***************** ... ..( 2 skipped). .. ***************** 70 2022-04-04 14:50 36 ***************** 71 2022-04-04 14:55 34 *************** 72 2022-04-04 15:00 34 *************** 73 2022-04-04 15:05 35 **************** ... ..( 3 skipped). .. **************** 77 2022-04-04 15:25 35 **************** 78 2022-04-04 15:30 34 *************** 79 2022-04-04 15:35 35 **************** 80 2022-04-04 15:40 34 *************** 81 2022-04-04 15:45 35 **************** 82 2022-04-04 15:50 28 ********* 83 2022-04-04 15:55 29 ********** 84 2022-04-04 16:00 30 *********** 85 2022-04-04 16:05 32 ************* 86 2022-04-04 16:10 32 ************* 87 2022-04-04 16:15 23 **** 88 2022-04-04 16:20 26 ******* 89 2022-04-04 16:25 29 ********** 90 2022-04-04 16:30 30 *********** 91 2022-04-04 16:35 31 ************ 92 2022-04-04 16:40 32 ************* 93 2022-04-04 16:45 33 ************** 94 2022-04-04 16:50 35 **************** 95 2022-04-04 16:55 35 **************** 96 2022-04-04 17:00 35 **************** 97 2022-04-04 17:05 34 *************** 98 2022-04-04 17:10 33 ************** 99 2022-04-04 17:15 35 **************** 100 2022-04-04 17:20 37 ****************** 101 2022-04-04 17:25 37 ****************** 102 2022-04-04 17:30 38 ******************* 103 2022-04-04 17:35 38 ******************* 104 2022-04-04 17:40 39 ******************** ... ..( 9 skipped). .. ******************** 114 2022-04-04 18:30 39 ******************** 115 2022-04-04 18:35 38 ******************* 116 2022-04-04 18:40 37 ****************** 117 2022-04-04 18:45 38 ******************* 118 2022-04-04 18:50 38 ******************* 119 2022-04-04 18:55 38 ******************* 120 2022-04-04 19:00 29 ********** 121 2022-04-04 19:05 32 ************* 122 2022-04-04 19:10 34 *************** 123 2022-04-04 19:15 35 **************** 124 2022-04-04 19:20 36 ***************** 125 2022-04-04 19:25 37 ****************** 126 2022-04-04 19:30 37 ****************** 127 2022-04-04 19:35 38 ******************* ... ..( 2 skipped). .. ******************* 2 2022-04-04 19:50 38 ******************* 3 2022-04-04 19:55 39 ******************** 4 2022-04-04 20:00 40 ********************* 5 2022-04-04 20:05 40 ********************* 6 2022-04-04 20:10 41 ********************** 7 2022-04-04 20:15 40 ********************* 8 2022-04-04 20:20 40 ********************* 9 2022-04-04 20:25 38 ******************* 10 2022-04-04 20:30 38 ******************* 11 2022-04-04 20:35 37 ****************** 12 2022-04-04 20:40 36 ***************** ... ..( 3 skipped). .. ***************** 16 2022-04-04 21:00 36 ***************** 17 2022-04-04 21:05 35 **************** 18 2022-04-04 21:10 36 ***************** 19 2022-04-04 21:15 35 **************** 20 2022-04-04 21:20 35 **************** 21 2022-04-04 21:25 24 ***** 22 2022-04-04 21:30 27 ******** 23 2022-04-04 21:35 29 ********** 24 2022-04-04 21:40 31 ************ 25 2022-04-04 21:45 32 ************* 26 2022-04-04 21:50 33 ************** 27 2022-04-04 21:55 34 *************** 28 2022-04-04 22:00 33 ************** 29 2022-04-04 22:05 34 *************** 30 2022-04-04 22:10 35 **************** 31 2022-04-04 22:15 24 ***** 32 2022-04-04 22:20 26 ******* 33 2022-04-04 22:25 28 ********* 34 2022-04-04 22:30 29 ********** 35 2022-04-04 22:35 31 ************ 36 2022-04-04 22:40 27 ******** 37 2022-04-04 22:45 28 ********* 38 2022-04-04 22:50 30 *********** 39 2022-04-04 22:55 31 ************ 40 2022-04-04 23:00 31 ************ 41 2022-04-04 23:05 32 ************* 42 2022-04-04 23:10 32 ************* 43 2022-04-04 23:15 33 ************** 44 2022-04-04 23:20 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific