/dev/sda === START OF INFORMATION SECTION === Model Family: Toshiba HG6 Series SSD Device Model: TOSHIBA THNSFJ256GCSU Serial Number: -- LU WWN Device Id: 5 00080d ... Firmware Version: JULA1102 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Oct 23 10:51:25 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--- 100 100 050 - 0 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0 8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 4611 10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 12 Power_Cycle_Count -O--C- 100 100 000 - 2661 167 SSD_Protect_Mode -O---K 100 100 000 - 0 168 SATA_PHY_Error_Count -O--C- 100 100 000 - 21558 169 Bad_Block_Count PO--C- 100 100 010 - 100 170 Unknown_Attribute PO--C- 100 100 010 - 0 173 Erase_Count -O--C- 192 192 000 - 0 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 651 194 Temperature_Celsius -O---K 059 047 000 - 41 (Min/Max 18/53) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 24471 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 24471 [150] occurred at disk power-on lifetime: 3492 hours (145 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 20 00 00 02 9c c0 a8 40 00 Error: ICRC, ABRT at LBA = 0x029cc0a8 = 43827368 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 20 00 00 02 9c c0 a8 40 00 00:08:01.300 WRITE FPDMA QUEUED 61 01 00 00 18 00 00 02 9c bf a8 40 00 00:08:01.300 WRITE FPDMA QUEUED 61 01 00 00 10 00 00 02 9c be a8 40 00 00:08:01.299 WRITE FPDMA QUEUED 61 00 58 00 08 00 00 02 9c be 50 40 00 00:08:01.295 WRITE FPDMA QUEUED 61 01 00 00 f8 00 00 02 9c bd 50 40 00 00:08:01.295 WRITE FPDMA QUEUED Error 24470 [149] occurred at disk power-on lifetime: 3492 hours (145 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 50 00 00 02 87 4e 80 40 00 Error: ICRC, ABRT at LBA = 0x02874e80 = 42421888 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 50 00 00 02 87 4e 80 40 00 00:05:01.721 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 02 87 4d 80 40 00 00:05:01.721 WRITE FPDMA QUEUED 61 01 00 00 40 00 00 02 87 4c 80 40 00 00:05:01.720 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 02 87 4b 80 40 00 00:05:01.720 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 02 87 4a 80 40 00 00:05:01.719 WRITE FPDMA QUEUED Error 24469 [148] occurred at disk power-on lifetime: 3491 hours (145 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 78 00 00 04 50 72 60 40 00 Error: ICRC, ABRT at LBA = 0x04507260 = 72381024 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 78 00 00 04 50 72 60 40 00 00:06:19.023 WRITE FPDMA QUEUED 61 01 00 00 70 00 00 04 50 71 60 40 00 00:06:19.023 WRITE FPDMA QUEUED 60 00 a0 00 68 00 00 02 ce ed c0 40 00 00:06:19.022 READ FPDMA QUEUED 60 01 00 00 60 00 00 02 ce ec c0 40 00 00:06:19.022 READ FPDMA QUEUED 60 01 00 00 58 00 00 02 ce eb c0 40 00 00:06:19.021 READ FPDMA QUEUED Error 24468 [147] occurred at disk power-on lifetime: 3491 hours (145 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 d8 00 00 00 64 c6 00 40 00 Error: UNC at LBA = 0x0064c600 = 6604288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 d8 00 00 00 64 c6 00 40 00 00:25:05.457 READ FPDMA QUEUED 60 01 00 00 d0 00 00 00 64 c5 00 40 00 00:25:05.446 READ FPDMA QUEUED 60 01 00 00 c8 00 00 00 64 c4 00 40 00 00:25:05.445 READ FPDMA QUEUED 60 01 00 00 c0 00 00 00 64 c3 00 40 00 00:25:05.416 READ FPDMA QUEUED 60 01 00 00 b8 00 00 00 64 c2 00 40 00 00:25:05.416 READ FPDMA QUEUED Error 24467 [146] occurred at disk power-on lifetime: 3490 hours (145 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 e0 00 00 00 5e 1c d8 40 00 Error: ICRC, ABRT at LBA = 0x005e1cd8 = 6167768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 e0 00 00 00 5e 1c d8 40 00 00:05:55.311 WRITE FPDMA QUEUED 60 00 08 00 d8 00 00 00 62 de 28 40 00 00:05:54.504 READ FPDMA QUEUED 60 00 08 00 d0 00 00 00 62 9f 90 40 00 00:05:54.492 READ FPDMA QUEUED 60 00 08 00 c8 00 00 00 62 97 f8 40 00 00:05:54.476 READ FPDMA QUEUED 60 00 08 00 c0 00 00 00 62 97 50 40 00 00:05:54.439 READ FPDMA QUEUED Error 24466 [145] occurred at disk power-on lifetime: 3475 hours (144 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 d0 00 00 05 04 cd 38 40 00 Error: UNC at LBA = 0x0504cd38 = 84200760 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 d0 00 00 05 04 cd 38 40 00 00:06:31.114 READ FPDMA QUEUED 60 01 00 00 c8 00 00 05 04 cc 38 40 00 00:06:31.114 READ FPDMA QUEUED 60 01 00 00 c0 00 00 05 04 cb 38 40 00 00:06:31.114 READ FPDMA QUEUED 60 01 00 00 b8 00 00 05 04 ca 38 40 00 00:06:31.113 READ FPDMA QUEUED 60 01 00 00 b0 00 00 05 04 c9 38 40 00 00:06:31.113 READ FPDMA QUEUED Error 24465 [144] occurred at disk power-on lifetime: 3467 hours (144 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 c0 00 00 05 7e f8 70 40 00 Error: ABRT at LBA = 0x057ef870 = 92207216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 c0 00 00 05 7e f8 70 40 00 00:05:59.144 WRITE FPDMA QUEUED 61 01 00 00 b8 00 00 05 7e f7 70 40 00 00:05:59.144 WRITE FPDMA QUEUED 60 00 08 00 b0 00 00 00 d9 96 00 40 00 00:05:59.140 READ FPDMA QUEUED 61 00 60 00 a8 00 00 05 7e f7 10 40 00 00:05:59.128 WRITE FPDMA QUEUED 61 01 00 00 a0 00 00 05 7e f6 10 40 00 00:05:59.128 WRITE FPDMA QUEUED Error 24464 [143] occurred at disk power-on lifetime: 3444 hours (143 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 48 00 00 02 c8 65 f8 40 00 Error: ICRC, ABRT at LBA = 0x02c865f8 = 46687736 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 48 00 00 02 c8 65 f8 40 00 00:08:55.953 WRITE FPDMA QUEUED 61 00 40 00 40 00 00 02 f4 46 f0 40 00 00:08:55.356 WRITE FPDMA QUEUED b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:08:55.342 SMART READ DATA b0 00 d8 00 01 00 00 00 c2 4f 01 a0 00 00:08:55.322 SMART ENABLE OPERATIONS 06 00 01 00 01 00 00 00 00 00 00 e0 00 00:08:55.086 DATA SET MANAGEMENT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4611 - # 2 Short offline Completed without error 00% 4550 - # 3 Short offline Completed without error 00% 4540 - # 4 Short offline Completed without error 00% 4539 - # 5 Short offline Completed without error 00% 4539 - # 6 Short offline Completed without error 00% 4538 - # 7 Short offline Completed without error 00% 4509 - # 8 Short offline Completed without error 00% 4373 - # 9 Short offline Completed without error 00% 4262 - #10 Short offline Completed without error 00% 4200 - #11 Short offline Completed without error 00% 3945 - #12 Short offline Completed without error 00% 3864 - #13 Short offline Interrupted (host reset) 00% 3835 - #14 Short offline Completed without error 00% 3818 - #15 Short offline Completed without error 00% 3782 - #16 Short offline Completed without error 00% 3678 - #17 Short offline Completed without error 00% 3655 - #18 Short offline Completed without error 00% 3625 - #19 Short offline Completed without error 00% 3587 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 3 (0x0003) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 37/41 Celsius Lifetime Min/Max Temperature: 18/53 Celsius Under/Over Temperature Limit Count: 0/3 Vendor specific: 00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00 00 01 00 00 c7 53 fd 00 04 04 00 00 00 00 00 06 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/40 Celsius Min/Max Temperature Limit: 0/80 Celsius Temperature History Size (Index): 128 (26) Index Estimated Time Temperature Celsius 27 2021-10-23 08:44 33 ************** ... ..( 11 skipped). .. ************** 39 2021-10-23 08:56 33 ************** 40 2021-10-23 08:57 34 *************** ... ..( 28 skipped). .. *************** 69 2021-10-23 09:26 34 *************** 70 2021-10-23 09:27 35 **************** ... ..( 14 skipped). .. **************** 85 2021-10-23 09:42 35 **************** 86 2021-10-23 09:43 34 *************** ... ..( 19 skipped). .. *************** 106 2021-10-23 10:03 34 *************** 107 2021-10-23 10:04 35 **************** ... ..( 10 skipped). .. **************** 118 2021-10-23 10:15 35 **************** 119 2021-10-23 10:16 36 ***************** 120 2021-10-23 10:17 ? - 121 2021-10-23 10:18 37 ****************** ... ..( 15 skipped). .. ****************** 9 2021-10-23 10:34 37 ****************** 10 2021-10-23 10:35 36 ***************** 11 2021-10-23 10:36 36 ***************** 12 2021-10-23 10:37 36 ***************** 13 2021-10-23 10:38 37 ****************** ... ..( 5 skipped). .. ****************** 19 2021-10-23 10:44 37 ****************** 20 2021-10-23 10:45 ? - 21 2021-10-23 10:46 38 ******************* 22 2021-10-23 10:47 38 ******************* 23 2021-10-23 10:48 40 ********************* 24 2021-10-23 10:49 41 ********************** 25 2021-10-23 10:50 41 ********************** 26 2021-10-23 10:51 41 ********************** SCT Error Recovery Control: Read: 600 (60.0 seconds) Write: 600 (60.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2661 --- Lifetime Power-On Resets 0x01 0x018 6 31784029920 --- Logical Sectors Written 0x01 0x020 6 347610072 --- Number of Write Commands 0x01 0x028 6 41674877044 --- Logical Sectors Read 0x01 0x030 6 620004295 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 2 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 13 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 35 --- Average Long Term Temperature 0x05 0x020 1 51 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x030 1 47 --- Highest Average Short Term Temperature 0x05 0x038 1 25 --- Lowest Average Short Term Temperature 0x05 0x040 1 36 --- Highest Average Long Term Temperature 0x05 0x048 1 28 --- Lowest Average Long Term Temperature 0x05 0x050 4 14130 --- Time in Over-Temperature 0x05 0x058 1 40 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 8251 --- Number of Hardware Resets 0x06 0x018 4 21558 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 8 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 56 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 12 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Device Model: WDC WD10JPVX-22JC3T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Oct 23 10:51:25 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18120) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 203) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 560 3 Spin_Up_Time POS--K 180 175 021 - 1966 4 Start_Stop_Count -O--CK 069 069 000 - 31670 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 3657 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 652 191 G-Sense_Error_Rate -O--CK 001 001 000 - 2005 192 Power-Off_Retract_Count -O--CK 200 200 000 - 178 193 Load_Cycle_Count -O--CK 175 175 000 - 77773 194 Temperature_Celsius -O---K 111 094 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 200 200 000 - 5 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 7 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 544 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 544 [15] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 40 00 00 26 d8 25 30 40 00 00:57:09.512 READ FPDMA QUEUED 60 01 00 00 38 00 00 26 d8 24 30 40 00 00:57:09.512 READ FPDMA QUEUED 60 01 00 00 30 00 00 26 d8 23 30 40 00 00:57:09.512 READ FPDMA QUEUED 60 01 00 00 28 00 00 26 d8 22 30 40 00 00:57:09.511 READ FPDMA QUEUED 60 01 00 00 20 00 00 26 d8 21 30 40 00 00:57:09.511 READ FPDMA QUEUED Error 543 [14] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e8 00 00 26 d8 25 30 40 00 00:57:05.805 READ FPDMA QUEUED 60 01 00 00 e0 00 00 26 d8 24 30 40 00 00:57:05.805 READ FPDMA QUEUED 60 01 00 00 d8 00 00 26 d8 23 30 40 00 00:57:05.805 READ FPDMA QUEUED 60 01 00 00 d0 00 00 26 d8 22 30 40 00 00:57:05.805 READ FPDMA QUEUED 60 01 00 00 c8 00 00 26 d8 21 30 40 00 00:57:05.805 READ FPDMA QUEUED Error 542 [13] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 48 00 00 26 d8 25 30 40 00 00:56:53.016 READ FPDMA QUEUED 60 01 00 00 40 00 00 26 d8 24 30 40 00 00:56:53.016 READ FPDMA QUEUED 60 01 00 00 38 00 00 26 d8 23 30 40 00 00:56:53.016 READ FPDMA QUEUED 60 01 00 00 30 00 00 26 d8 22 30 40 00 00:56:53.016 READ FPDMA QUEUED 60 01 00 00 28 00 00 26 d8 21 30 40 00 00:56:53.015 READ FPDMA QUEUED Error 541 [12] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 10 00 00 26 d8 25 30 40 00 00:56:44.399 READ FPDMA QUEUED 60 01 00 00 08 00 00 26 d8 24 30 40 00 00:56:44.399 READ FPDMA QUEUED 60 01 00 00 f8 00 00 26 d8 23 30 40 00 00:56:44.399 READ FPDMA QUEUED 60 01 00 00 f0 00 00 26 d8 22 30 40 00 00:56:44.399 READ FPDMA QUEUED 60 01 00 00 e8 00 00 26 d8 21 30 40 00 00:56:44.399 READ FPDMA QUEUED Error 540 [11] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 20 00 00 26 d8 25 30 40 00 00:56:28.279 READ FPDMA QUEUED 60 01 00 00 18 00 00 26 d8 24 30 40 00 00:56:28.279 READ FPDMA QUEUED 60 01 00 00 10 00 00 26 d8 23 30 40 00 00:56:28.279 READ FPDMA QUEUED 60 01 00 00 08 00 00 26 d8 22 30 40 00 00:56:28.279 READ FPDMA QUEUED 60 01 00 00 f8 00 00 26 d8 21 30 40 00 00:56:28.279 READ FPDMA QUEUED Error 539 [10] occurred at disk power-on lifetime: 3654 hours (152 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 50 00 00 26 d8 25 30 40 00 00:56:20.809 READ FPDMA QUEUED 60 01 00 00 48 00 00 26 d8 24 30 40 00 00:56:20.809 READ FPDMA QUEUED 60 01 00 00 40 00 00 26 d8 23 30 40 00 00:56:20.809 READ FPDMA QUEUED 60 01 00 00 38 00 00 26 d8 22 30 40 00 00:56:20.808 READ FPDMA QUEUED 60 01 00 00 30 00 00 26 d8 21 30 40 00 00:56:20.808 READ FPDMA QUEUED Error 538 [9] occurred at disk power-on lifetime: 3642 hours (151 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 23 78 40 00 Error: UNC at LBA = 0x26d82378 = 651699064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 38 00 00 26 d8 25 30 40 00 01:17:42.395 READ FPDMA QUEUED 60 01 00 00 30 00 00 26 d8 24 30 40 00 01:17:42.395 READ FPDMA QUEUED 60 01 00 00 28 00 00 26 d8 23 30 40 00 01:17:42.395 READ FPDMA QUEUED 60 01 00 00 20 00 00 26 d8 22 30 40 00 01:17:42.395 READ FPDMA QUEUED 60 01 00 00 18 00 00 26 d8 21 30 40 00 01:17:42.395 READ FPDMA QUEUED Error 537 [8] occurred at disk power-on lifetime: 3642 hours (151 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 26 d8 2b c8 40 00 Error: UNC at LBA = 0x26d82bc8 = 651701192 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 28 00 00 26 d8 2b c0 40 00 01:16:40.298 READ FPDMA QUEUED 60 00 20 00 20 00 00 15 a5 5a e8 40 00 01:16:40.294 READ FPDMA QUEUED 60 00 20 00 18 00 00 15 a7 04 88 40 00 01:16:40.285 READ FPDMA QUEUED 60 00 20 00 10 00 00 15 a7 75 88 40 00 01:16:40.282 READ FPDMA QUEUED 60 00 20 00 08 00 00 15 a6 59 48 40 00 01:16:40.264 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 3596 651699064 # 2 Short offline Completed: read failure 90% 3586 651699064 # 3 Short offline Completed: read failure 90% 3585 651699064 # 4 Short offline Completed: read failure 90% 3585 651699064 # 5 Short offline Completed: read failure 90% 3585 651699064 # 6 Short offline Completed: read failure 90% 3555 651699064 # 7 Short offline Completed: read failure 90% 3421 651699064 # 8 Short offline Completed without error 00% 3313 - # 9 Short offline Completed: read failure 90% 3252 651699064 #10 Short offline Aborted by host 70% 3002 - #11 Short offline Completed without error 00% 1897 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 36/37 Celsius Lifetime Min/Max Temperature: 13/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (7) Index Estimated Time Temperature Celsius 8 2021-10-23 08:44 34 *************** ... ..( 26 skipped). .. *************** 35 2021-10-23 09:11 34 *************** 36 2021-10-23 09:12 35 **************** ... ..( 12 skipped). .. **************** 49 2021-10-23 09:25 35 **************** 50 2021-10-23 09:26 34 *************** ... ..( 11 skipped). .. *************** 62 2021-10-23 09:38 34 *************** 63 2021-10-23 09:39 35 **************** ... ..( 20 skipped). .. **************** 84 2021-10-23 10:00 35 **************** 85 2021-10-23 10:01 ? - 86 2021-10-23 10:02 35 **************** 87 2021-10-23 10:03 ? - 88 2021-10-23 10:04 35 **************** ... ..( 6 skipped). .. **************** 95 2021-10-23 10:11 35 **************** 96 2021-10-23 10:12 36 ***************** ... ..( 2 skipped). .. ***************** 99 2021-10-23 10:15 36 ***************** 100 2021-10-23 10:16 37 ****************** 101 2021-10-23 10:17 37 ****************** 102 2021-10-23 10:18 37 ****************** 103 2021-10-23 10:19 38 ******************* ... ..( 10 skipped). .. ******************* 114 2021-10-23 10:30 38 ******************* 115 2021-10-23 10:31 37 ****************** 116 2021-10-23 10:32 ? - 117 2021-10-23 10:33 37 ****************** 118 2021-10-23 10:34 ? - 119 2021-10-23 10:35 37 ****************** 120 2021-10-23 10:36 36 ***************** 121 2021-10-23 10:37 ? - 122 2021-10-23 10:38 36 ***************** 123 2021-10-23 10:39 36 ***************** 124 2021-10-23 10:40 ? - 125 2021-10-23 10:41 36 ***************** 126 2021-10-23 10:42 ? - 127 2021-10-23 10:43 36 ***************** 0 2021-10-23 10:44 36 ***************** 1 2021-10-23 10:45 36 ***************** 2 2021-10-23 10:46 ? - 3 2021-10-23 10:47 36 ***************** 4 2021-10-23 10:48 ? - 5 2021-10-23 10:49 36 ***************** 6 2021-10-23 10:50 36 ***************** 7 2021-10-23 10:51 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 102 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 587 Vendor specific