/dev/sda === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax D540X-4K Device Model: MAXTOR 4K060H3 Serial Number: -- Firmware Version: A08.1500 User Capacity: 60 040 544 256 bytes [60,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-5 T13/1321D revision 1 Local Time is: Sun Dec 27 17:18:02 2015 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 44) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 38) minutes. SMART Attributes Data Structure revision number: 11 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate P--R-K 100 253 020 - 0 3 Spin_Up_Time POS--K 078 076 020 - 2776 4 Start_Stop_Count -O--CK 085 085 008 - 10389 5 Reallocated_Sector_Ct PO--CK 098 098 020 - 14 7 Seek_Error_Rate PO-R-- 100 093 023 - 0 9 Power_On_Hours -O--C- 067 067 001 - 22226 10 Spin_Retry_Count -OS--K 100 080 000 - 0 11 Calibration_Retry_Count PO--C- 100 100 020 - 0 12 Power_Cycle_Count -O--CK 085 085 008 - 10105 13 Read_Soft_Error_Rate PO-R-- 100 093 023 - 0 194 Temperature_Celsius -O---K 090 081 042 - 26 195 Hardware_ECC_Recovered -O-RC- 100 003 000 - 950429420 196 Reallocated_Event_Count ----C- 100 253 020 - 0 197 Current_Pending_Sector -O--CK 100 100 020 - 0 198 Offline_Uncorrectable ----C- 100 253 000 - 0 199 UDMA_CRC_Error_Count -O-RC- 169 169 000 - 31 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted command Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 375 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 375 occurred at disk power-on lifetime: 16841 hours (701 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 81 01 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 05 01 01 00 00 b0 76 00:06:01.919 IDENTIFY DEVICE a1 05 01 01 00 00 b0 76 00:06:01.521 IDENTIFY PACKET DEVICE ff ff ff ff ff ff ff ff 00:06:00.951 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:56.484 [VENDOR SPECIFIC] ec 05 01 01 00 00 b0 76 00:05:46.874 IDENTIFY DEVICE Error 374 occurred at disk power-on lifetime: 16841 hours (701 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 81 01 01 00 00 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 05 01 01 00 00 b0 76 00:06:01.521 IDENTIFY PACKET DEVICE ff ff ff ff ff ff ff ff 00:06:00.951 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:56.484 [VENDOR SPECIFIC] ec 05 01 01 00 00 b0 76 00:05:46.874 IDENTIFY DEVICE a1 05 01 01 00 00 b0 76 00:05:46.477 IDENTIFY PACKET DEVICE Error 373 occurred at disk power-on lifetime: 16841 hours (701 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 81 01 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 05 01 01 00 00 b0 76 00:05:46.874 IDENTIFY DEVICE a1 05 01 01 00 00 b0 76 00:05:46.477 IDENTIFY PACKET DEVICE ff ff ff ff ff ff ff ff 00:05:45.906 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:38.059 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:37.652 [VENDOR SPECIFIC] Error 372 occurred at disk power-on lifetime: 16841 hours (701 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 81 01 01 00 00 b0 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a1 05 01 01 00 00 b0 76 00:05:46.477 IDENTIFY PACKET DEVICE ff ff ff ff ff ff ff ff 00:05:45.906 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:38.059 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:05:37.652 [VENDOR SPECIFIC] ec 05 05 01 00 00 b0 76 00:05:37.353 IDENTIFY DEVICE Error 371 occurred at disk power-on lifetime: 16841 hours (701 days + 17 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 81 05 01 00 00 b0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ec 05 05 01 00 00 b0 76 00:05:37.353 IDENTIFY DEVICE a1 05 05 01 00 00 b0 76 00:05:36.881 IDENTIFY PACKET DEVICE ff ff ff ff ff ff ff ff 00:05:31.789 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:04:50.721 [VENDOR SPECIFIC] ff ff ff ff ff ff ff ff 00:04:49.703 [VENDOR SPECIFIC] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 Device Model: ST3808110AS Serial Number: -- Firmware Version: 3.AAE User Capacity: 80 026 361 856 bytes [80,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Dec 27 17:18:03 2015 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 27) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 104 093 006 - 40742667 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 094 094 020 - 7061 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 086 060 030 - 439877428 9 Power_On_Hours -O--CK 083 083 000 - 15652 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 7004 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 066 050 045 - 34 (Min/Max 27/34) 194 Temperature_Celsius -O---K 034 050 000 - 34 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 064 045 000 - 175822825 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 194 000 - 31 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 31 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 31 [10] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 37 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 55 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 78 00 00 aa 00 39 00 e0 00 00:01:27.839 READ DMA EXT c8 00 00 00 08 00 00 19 00 38 38 e0 00 00:01:27.830 READ DMA c8 00 00 00 08 00 00 e9 00 37 b8 e0 00 00:01:27.827 READ DMA c8 00 00 00 b8 00 00 a3 00 39 00 e0 00 00:01:27.817 READ DMA c8 00 00 00 c0 00 00 9c 00 39 00 e0 00 00:01:27.887 READ DMA Error 30 [9] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 cf 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 207 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 10 00 00 e4 00 1f 10 e0 00 00:01:26.081 READ DMA EXT 25 00 00 01 90 00 00 d6 00 1f 18 e0 00 00:01:26.081 READ DMA EXT 25 00 00 02 50 00 00 d2 00 1f 58 e0 00 00:01:26.080 READ DMA EXT c8 00 00 00 28 00 00 9f 00 1d 48 e0 00 00:01:26.078 READ DMA c8 00 00 00 28 00 00 9f 00 1d 10 e0 00 00:01:26.071 READ DMA Error 29 [8] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 30 00 00 af 00 18 20 e0 00 00:01:24.491 READ DMA EXT 25 00 00 01 b8 00 00 ac 00 18 90 e0 00 00:01:24.488 READ DMA EXT c8 00 00 00 d8 00 00 a6 00 18 50 e0 00 00:01:24.487 READ DMA 25 00 00 04 00 00 00 a2 00 18 50 e0 00 00:01:24.537 READ DMA EXT c8 00 00 00 18 00 00 01 00 18 08 e0 00 00:01:24.525 READ DMA Error 28 [7] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 9f 00 00 00 00 00 00 e1 00 Error: ICRC, ABRT 159 sectors at LBA = 0x01000000 = 16777216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 01 00 00 01 3c 00 80 08 e1 00 00:01:20.561 READ DMA c8 00 00 01 00 00 01 3b 00 80 08 e1 00 00:01:20.559 READ DMA c8 00 00 01 00 00 01 3a 00 80 08 e1 00 00:01:20.558 READ DMA c8 00 00 01 00 00 01 39 00 80 08 e1 00 00:01:20.555 READ DMA c8 00 00 01 00 00 01 38 00 80 08 e1 00 00:01:20.553 READ DMA Error 27 [6] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 37 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 55 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 38 00 00 ca 00 d8 58 e0 00 00:02:25.417 READ DMA EXT c8 00 00 01 00 00 00 c8 00 d8 38 e0 00 00:02:25.411 READ DMA c8 00 00 00 e0 00 00 c1 00 d8 00 e0 00 00:02:25.400 READ DMA c8 00 00 01 00 00 00 46 00 d8 00 e0 00 00:02:25.487 READ DMA c8 00 00 01 00 00 00 3b 00 d8 60 e0 00 00:02:25.482 READ DMA Error 26 [5] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 3f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 63 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 50 00 00 59 00 94 68 e0 00 00:02:23.035 READ DMA c8 00 00 00 38 00 00 57 00 94 80 e0 00 00:02:23.035 READ DMA c8 00 00 00 38 00 00 54 00 94 68 e0 00 00:02:23.032 READ DMA c8 00 00 00 10 00 00 07 00 94 60 e0 00 00:02:23.030 READ DMA c8 00 00 00 08 00 00 05 00 94 d8 e0 00 00:02:23.024 READ DMA Error 25 [4] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 37 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 55 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 a8 00 00 68 00 36 00 e0 00 00:02:20.255 READ DMA EXT 25 00 00 01 28 00 00 46 00 36 00 e0 00 00:02:20.252 READ DMA EXT c8 00 00 00 88 00 00 3c 00 36 70 e0 00 00:02:20.246 READ DMA c8 00 00 00 20 00 00 3c 00 36 00 e0 00 00:02:20.243 READ DMA 25 00 00 04 00 00 00 38 00 36 00 e0 00 00:02:20.239 READ DMA EXT Error 24 [3] occurred at disk power-on lifetime: 15642 hours (651 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 4f 00 00 00 00 00 00 e0 00 Error: ICRC, ABRT 79 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 01 00 00 00 92 00 34 c8 e0 00 00:02:18.748 READ DMA c8 00 00 01 00 00 00 90 00 34 b0 e0 00 00:02:18.745 READ DMA c8 00 00 01 00 00 00 8e 00 34 b0 e0 00 00:02:18.742 READ DMA c8 00 00 01 00 00 00 8c 00 34 80 e0 00 00:02:18.737 READ DMA c8 00 00 01 00 00 00 8a 00 34 60 e0 00 00:02:18.734 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS