/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.20-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: AirDisk 256GB SSD Serial Number: -- LU WWN Device Id: 5 3a5a27 ... Firmware Version: SN12980 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 2 11:24:06 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--C- 100 100 010 - 0 9 Power_On_Hours -O--C- 100 100 000 - 3 12 Power_Cycle_Count -O--C- 100 100 000 - 26 164 Unknown_Attribute ------ 100 100 000 - 12885164035 165 Unknown_Attribute ------ 100 100 000 - 4 166 Unknown_Attribute ------ 100 100 000 - 3 167 Unknown_Attribute -O---K 100 100 000 - 3 194 Temperature_Celsius -O---K 032 032 000 - 32 (Min/Max 27/37) 199 UDMA_CRC_Error_Count -O--C- 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 32 242 Total_LBAs_Read -O--CK 100 100 000 - 14 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: ?/36 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (110) Index Estimated Time Temperature Celsius 111 2023-07-02 03:27 ? - ... ..(368 skipped). .. - 2 2023-07-02 09:36 ? - 3 2023-07-02 09:37 33 ************** 4 2023-07-02 09:38 34 *************** 5 2023-07-02 09:39 34 *************** 6 2023-07-02 09:40 ? - ... ..( 2 skipped). .. - 9 2023-07-02 09:43 ? - 10 2023-07-02 09:44 33 ************** 11 2023-07-02 09:45 ? - ... ..( 2 skipped). .. - 14 2023-07-02 09:48 ? - 15 2023-07-02 09:49 30 *********** 16 2023-07-02 09:50 ? - 17 2023-07-02 09:51 30 *********** 18 2023-07-02 09:52 29 ********** 19 2023-07-02 09:53 29 ********** 20 2023-07-02 09:54 ? - ... ..( 9 skipped). .. - 30 2023-07-02 10:04 ? - 31 2023-07-02 10:05 31 ************ 32 2023-07-02 10:06 ? - 33 2023-07-02 10:07 31 ************ 34 2023-07-02 10:08 30 *********** 35 2023-07-02 10:09 ? - 36 2023-07-02 10:10 30 *********** 37 2023-07-02 10:11 ? - 38 2023-07-02 10:12 31 ************ 39 2023-07-02 10:13 32 ************* 40 2023-07-02 10:14 33 ************** 41 2023-07-02 10:15 34 *************** 42 2023-07-02 10:16 33 ************** 43 2023-07-02 10:17 34 *************** 44 2023-07-02 10:18 33 ************** 45 2023-07-02 10:19 33 ************** 46 2023-07-02 10:20 33 ************** 47 2023-07-02 10:21 34 *************** ... ..( 2 skipped). .. *************** 50 2023-07-02 10:24 34 *************** 51 2023-07-02 10:25 36 ***************** 52 2023-07-02 10:26 36 ***************** 53 2023-07-02 10:27 35 **************** 54 2023-07-02 10:28 34 *************** 55 2023-07-02 10:29 35 **************** 56 2023-07-02 10:30 32 ************* 57 2023-07-02 10:31 33 ************** 58 2023-07-02 10:32 35 **************** 59 2023-07-02 10:33 34 *************** 60 2023-07-02 10:34 35 **************** 61 2023-07-02 10:35 34 *************** 62 2023-07-02 10:36 36 ***************** 63 2023-07-02 10:37 34 *************** 64 2023-07-02 10:38 33 ************** 65 2023-07-02 10:39 34 *************** 66 2023-07-02 10:40 34 *************** 67 2023-07-02 10:41 33 ************** 68 2023-07-02 10:42 34 *************** ... ..( 2 skipped). .. *************** 71 2023-07-02 10:45 34 *************** 72 2023-07-02 10:46 33 ************** 73 2023-07-02 10:47 33 ************** 74 2023-07-02 10:48 33 ************** 75 2023-07-02 10:49 ? - 76 2023-07-02 10:50 31 ************ 77 2023-07-02 10:51 ? - 78 2023-07-02 10:52 ? - 79 2023-07-02 10:53 31 ************ 80 2023-07-02 10:54 32 ************* 81 2023-07-02 10:55 31 ************ 82 2023-07-02 10:56 32 ************* 83 2023-07-02 10:57 33 ************** 84 2023-07-02 10:58 33 ************** 85 2023-07-02 10:59 34 *************** 86 2023-07-02 11:00 ? - 87 2023-07-02 11:01 32 ************* 88 2023-07-02 11:02 30 *********** 89 2023-07-02 11:03 32 ************* 90 2023-07-02 11:04 ? - 91 2023-07-02 11:05 31 ************ 92 2023-07-02 11:06 30 *********** 93 2023-07-02 11:07 34 *************** 94 2023-07-02 11:08 33 ************** ... ..( 2 skipped). .. ************** 97 2023-07-02 11:11 33 ************** 98 2023-07-02 11:12 35 **************** 99 2023-07-02 11:13 33 ************** 100 2023-07-02 11:14 34 *************** 101 2023-07-02 11:15 34 *************** 102 2023-07-02 11:16 32 ************* 103 2023-07-02 11:17 32 ************* 104 2023-07-02 11:18 32 ************* 105 2023-07-02 11:19 34 *************** 106 2023-07-02 11:20 33 ************** 107 2023-07-02 11:21 35 **************** 108 2023-07-02 11:22 35 **************** 109 2023-07-02 11:23 36 ***************** 110 2023-07-02 11:24 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 26 --- Lifetime Power-On Resets 0x01 0x010 4 3 --- Power-on Hours 0x01 0x018 6 68043398 --- Logical Sectors Written 0x01 0x020 6 1020909 --- Number of Write Commands 0x01 0x028 6 31257400 --- Logical Sectors Read 0x01 0x030 6 942607 --- Number of Read Commands 0x01 0x038 6 150723639651513 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 12 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC