/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO 250GB Serial Number: -- Firmware Version: 2B2QEXE7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 250,059,350,016 [250 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 250,059,350,016 [250 GB] Namespace 1 Utilization: 101,092,282,368 [101 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Sun Jan 10 09:11:16 2021 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 84 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.20W - - 0 0 0 0 0 0 1 + 4.30W - - 1 1 1 1 0 0 2 + 2.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 10,136,367 [5.18 TB] Data Units Written: 9,053,587 [4.63 TB] Host Read Commands: 209,097,046 Host Write Commands: 122,026,475 Controller Busy Time: 669 Power Cycles: 2,485 Power On Hours: 760 Unsafe Shutdowns: 385 Media and Data Integrity Errors: 0 Error Information Log Entries: 269 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 34 Celsius Temperature Sensor 2: 40 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: ADATA SX8200PNP Serial Number: -- Firmware Version: 42A4SANA PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x000000 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 271,430,938,624 [271 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sun Jan 10 09:11:16 2021 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0b): S/H_per_NS Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 15000 15000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 1,888,863 [967 GB] Data Units Written: 3,520,433 [1.80 TB] Host Read Commands: 48,947,016 Host Write Commands: 79,157,947 Controller Busy Time: 1,458 Power Cycles: 1,173 Power On Hours: 1,684 Unsafe Shutdowns: 15 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 2: 37 Celsius Temperature Sensor 3: 47 Celsius Temperature Sensor 4: 32 Celsius Temperature Sensor 5: 32 Celsius Temperature Sensor 6: 37 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate BarraCuda 3.5 Device Model: ST2000DM008-2FR102 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 10 09:11:16 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 194) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30a5) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 077 064 006 - 47894063 3 Spin_Up_Time PO---- 098 098 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1128 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 074 060 045 - 27931249 9 Power_On_Hours -O--CK 098 098 000 - 1969 (127 254 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1128 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 070 059 040 - 30 (Min/Max 23/30) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 47 193 Load_Cycle_Count -O--CK 098 098 000 - 5621 194 Temperature_Celsius -O---K 030 041 000 - 30 (0 23 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 077 064 000 - 47894063 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 221h+42m+24.950s 241 Total_LBAs_Written ------ 100 253 000 - 5119344854 242 Total_LBAs_Read ------ 100 253 000 - 3574903733 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbd GPL VS 8 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 23/29 Celsius Lifetime Min/Max Temperature: 23/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2021-01-05 03:50 25 ****** 95 2021-01-05 04:49 ? - 96 2021-01-05 05:48 27 ******** 97 2021-01-05 06:47 ? - 98 2021-01-05 07:46 25 ****** 99 2021-01-05 08:45 ? - 100 2021-01-05 09:44 24 ***** 101 2021-01-05 10:43 ? - 102 2021-01-05 11:42 25 ****** 103 2021-01-05 12:41 ? - 104 2021-01-05 13:40 27 ******** 105 2021-01-05 14:39 ? - 106 2021-01-05 15:38 25 ****** 107 2021-01-05 16:37 ? - 108 2021-01-05 17:36 25 ****** 109 2021-01-05 18:35 ? - 110 2021-01-05 19:34 27 ******** 111 2021-01-05 20:33 ? - 112 2021-01-05 21:32 24 ***** 113 2021-01-05 22:31 ? - 114 2021-01-05 23:30 24 ***** 115 2021-01-06 00:29 ? - 116 2021-01-06 01:28 24 ***** 117 2021-01-06 02:27 31 ************ 118 2021-01-06 03:26 35 **************** 119 2021-01-06 04:25 ? - 120 2021-01-06 05:24 25 ****** 121 2021-01-06 06:23 ? - 122 2021-01-06 07:22 24 ***** 123 2021-01-06 08:21 ? - 124 2021-01-06 09:20 24 ***** 125 2021-01-06 10:19 ? - 126 2021-01-06 11:18 24 ***** 127 2021-01-06 12:17 ? - 0 2021-01-06 13:16 25 ****** 1 2021-01-06 14:15 ? - 2 2021-01-06 15:14 26 ******* 3 2021-01-06 16:13 31 ************ 4 2021-01-06 17:12 31 ************ 5 2021-01-06 18:11 34 *************** 6 2021-01-06 19:10 32 ************* 7 2021-01-06 20:09 ? - 8 2021-01-06 21:08 24 ***** 9 2021-01-06 22:07 ? - 10 2021-01-06 23:06 31 ************ 11 2021-01-07 00:05 ? - 12 2021-01-07 01:04 30 *********** 13 2021-01-07 02:03 ? - 14 2021-01-07 03:02 25 ****** 15 2021-01-07 04:01 ? - 16 2021-01-07 05:00 24 ***** 17 2021-01-07 05:59 32 ************* 18 2021-01-07 06:58 ? - 19 2021-01-07 07:57 24 ***** 20 2021-01-07 08:56 ? - 21 2021-01-07 09:55 26 ******* 22 2021-01-07 10:54 ? - 23 2021-01-07 11:53 27 ******** 24 2021-01-07 12:52 ? - 25 2021-01-07 13:51 25 ****** 26 2021-01-07 14:50 ? - 27 2021-01-07 15:49 24 ***** 28 2021-01-07 16:48 ? - 29 2021-01-07 17:47 26 ******* 30 2021-01-07 18:46 ? - 31 2021-01-07 19:45 24 ***** 32 2021-01-07 20:44 ? - 33 2021-01-07 21:43 25 ****** 34 2021-01-07 22:42 32 ************* ... ..( 2 skipped). .. ************* 37 2021-01-08 01:39 32 ************* 38 2021-01-08 02:38 34 *************** 39 2021-01-08 03:37 ? - 40 2021-01-08 04:36 24 ***** 41 2021-01-08 05:35 33 ************** 42 2021-01-08 06:34 ? - 43 2021-01-08 07:33 33 ************** 44 2021-01-08 08:32 ? - 45 2021-01-08 09:31 24 ***** 46 2021-01-08 10:30 ? - 47 2021-01-08 11:29 24 ***** 48 2021-01-08 12:28 ? - 49 2021-01-08 13:27 28 ********* 50 2021-01-08 14:26 ? - 51 2021-01-08 15:25 25 ****** 52 2021-01-08 16:24 ? - 53 2021-01-08 17:23 25 ****** 54 2021-01-08 18:22 ? - 55 2021-01-08 19:21 25 ****** 56 2021-01-08 20:20 ? - 57 2021-01-08 21:19 24 ***** 58 2021-01-08 22:18 ? - 59 2021-01-08 23:17 25 ****** 60 2021-01-09 00:16 31 ************ 61 2021-01-09 01:15 33 ************** 62 2021-01-09 02:14 ? - 63 2021-01-09 03:13 24 ***** 64 2021-01-09 04:12 ? - 65 2021-01-09 05:11 23 **** 66 2021-01-09 06:10 ? - 67 2021-01-09 07:09 24 ***** 68 2021-01-09 08:08 ? - 69 2021-01-09 09:07 23 **** 70 2021-01-09 10:06 ? - 71 2021-01-09 11:05 29 ********** 72 2021-01-09 12:04 ? - 73 2021-01-09 13:03 25 ****** 74 2021-01-09 14:02 ? - 75 2021-01-09 15:01 25 ****** 76 2021-01-09 16:00 ? - 77 2021-01-09 16:59 24 ***** 78 2021-01-09 17:58 ? - 79 2021-01-09 18:57 26 ******* 80 2021-01-09 19:56 ? - 81 2021-01-09 20:55 25 ****** 82 2021-01-09 21:54 ? - 83 2021-01-09 22:53 24 ***** 84 2021-01-09 23:52 ? - 85 2021-01-10 00:51 24 ***** 86 2021-01-10 01:50 ? - 87 2021-01-10 02:49 25 ****** 88 2021-01-10 03:48 ? - 89 2021-01-10 04:47 24 ***** 90 2021-01-10 05:46 ? - 91 2021-01-10 06:45 24 ***** 92 2021-01-10 07:44 ? - 93 2021-01-10 08:43 23 **** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1128 --- Lifetime Power-On Resets 0x01 0x010 4 1969 --- Power-on Hours 0x01 0x018 6 5158747336 --- Logical Sectors Written 0x01 0x020 6 7400219 --- Number of Write Commands 0x01 0x028 6 3601272379 --- Logical Sectors Read 0x01 0x030 6 25684605 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1957 --- Spindle Motor Power-on Hours 0x03 0x010 4 218 --- Head Flying Hours 0x03 0x018 4 5621 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 1 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 47 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x010 1 31 --- Average Short Term Temperature 0x05 0x018 1 31 --- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 37 --- Highest Average Short Term Temperature 0x05 0x038 1 30 --- Lowest Average Short Term Temperature 0x05 0x040 1 35 --- Highest Average Long Term Temperature 0x05 0x048 1 30 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 731 --- Number of Hardware Resets 0x06 0x010 4 136 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 10 09:11:16 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 9097 12 Power_Cycle_Count -O--CK 094 094 000 - 5394 177 Wear_Leveling_Count PO--C- 097 097 000 - 60 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 099 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 073 054 000 - 27 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 191 241 Total_LBAs_Written -O--CK 099 099 000 - 9350656496 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0xff00): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 25/40 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (2) Index Estimated Time Temperature Celsius 3 2021-01-09 12:00 ? - ... ..(123 skipped). .. - 127 2021-01-10 08:40 ? - 0 2021-01-10 08:50 40 ********************* 1 2021-01-10 09:00 25 ****** 2 2021-01-10 09:10 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Desktop SSHD Device Model: ST1000DX001-1NS162 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC41 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 10 09:11:17 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 82396592 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3340 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 073 060 030 - 21241032 9 Power_On_Hours -O--CK 092 092 000 - 7686 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4195 183 Runtime_Bad_Block -O--CK 078 078 000 - 22 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 094 094 000 - 6 188 Command_Timeout -O--CK 100 099 000 - 0 0 5 189 High_Fly_Writes -O-RCK 092 092 000 - 8 190 Airflow_Temperature_Cel -O---K 071 058 045 - 29 (Min/Max 21/29) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 157 193 Load_Cycle_Count -O--CK 093 093 000 - 14513 194 Temperature_Celsius -O---K 029 042 000 - 29 (0 18 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 13240h+07m+48.440s 241 Total_LBAs_Written ------ 100 253 000 - 8817575710 242 Total_LBAs_Read ------ 100 253 000 - 92646440817 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 3900 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4580 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 6 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [5] occurred at disk power-on lifetime: 7333 hours (305 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 00 12 9b 2c 88 00 00 Error: UNC at LBA = 0x129b2c88 = 312159368 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 0b ff 58 40 00 00:12:52.568 READ FPDMA QUEUED 60 00 00 00 08 00 00 12 9c 15 28 40 00 00:12:52.568 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 66 d2 d0 40 00 00:12:52.568 WRITE FPDMA QUEUED 60 00 00 01 00 00 00 12 9b 2c 00 40 00 00:12:52.122 READ FPDMA QUEUED 60 00 00 00 08 00 00 01 0a 5d a8 40 00 00:12:52.122 READ FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 7333 hours (305 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 00 12 9b 22 a6 00 00 Error: WP at LBA = 0x129b22a6 = 312156838 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 08 00 00 00 0b 0b c0 40 00 00:12:47.569 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 2b fd 9f 40 40 00 00:12:47.569 WRITE FPDMA QUEUED 60 00 00 00 20 00 00 00 0b 0b c0 40 00 00:12:47.084 READ FPDMA QUEUED 60 00 00 01 00 00 00 12 9b 22 00 40 00 00:12:47.084 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:12:47.083 FLUSH CACHE EXT Error 4 [3] occurred at disk power-on lifetime: 7333 hours (305 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 00 12 9b 22 a6 00 00 Error: UNC at LBA = 0x129b22a6 = 312156838 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 12 9b 36 c8 40 00 00:12:45.960 READ FPDMA QUEUED 60 00 00 01 00 00 00 12 9b 22 00 40 00 00:12:45.951 READ FPDMA QUEUED 61 00 00 00 08 00 00 01 0a 6d 10 40 00 00:12:45.949 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 2b fd 9f 20 40 00 00:12:45.947 WRITE FPDMA QUEUED 60 00 00 00 20 00 00 01 0a 6d 00 40 00 00:12:45.944 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 7333 hours (305 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 00 12 9b 1e 48 00 00 Error: UNC at LBA = 0x129b1e48 = 312155720 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 12 9b 1e 00 40 00 00:12:45.352 READ FPDMA QUEUED 60 00 00 00 02 00 00 12 9b 1e 40 40 00 00:12:45.326 READ FPDMA QUEUED 60 00 00 00 08 00 00 12 9b 36 50 40 00 00:12:45.325 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:12:45.324 READ LOG EXT 60 00 00 00 08 00 00 12 9b 36 50 40 00 00:12:45.305 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 7333 hours (305 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 53 00 00 00 00 12 9b 1e 48 00 00 Error: UNC at LBA = 0x129b1e48 = 312155720 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 12 9b 36 50 40 00 00:12:45.305 READ FPDMA QUEUED 60 00 00 01 00 00 00 12 9b 1e 00 40 00 00:12:44.729 READ FPDMA QUEUED 60 00 00 00 08 00 00 2b fd 9e e8 40 00 00:12:44.729 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 0a f8 00 40 00 00:12:44.727 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 cb 68 00 40 00 00:12:44.725 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 6233 hours (259 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1d a2 43 28 00 00 Error: UNC at LBA = 0x1da24328 = 497173288 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6d 82 a0 40 00 00:01:17.267 READ FPDMA QUEUED 60 00 00 01 00 00 00 1d a2 43 00 40 00 00:01:16.829 READ FPDMA QUEUED 60 00 00 00 08 00 00 01 0a 5d a8 40 00 00:01:16.828 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 0a f8 00 40 00 00:01:16.826 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 cb 68 00 40 00 00:01:16.821 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 25/25 Celsius Lifetime Min/Max Temperature: 25/39 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 4195 --- Lifetime Power-On Resets 0x01 0x010 4 7686 --- Power-on Hours 0x01 0x018 6 8633057651 --- Logical Sectors Written 0x01 0x020 6 47451604 --- Number of Write Commands 0x01 0x028 6 6661544392 --- Logical Sectors Read 0x01 0x030 6 56967806 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 23 --- Spindle Motor Power-on Hours 0x03 0x010 4 8 --- Head Flying Hours 0x03 0x018 4 14513 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 5 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD40EZRZ-22GXCB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 10 09:11:17 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (44880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 477) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 174 172 021 - 6291 4 Start_Stop_Count -O--CK 097 097 000 - 3077 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 2012 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3077 192 Power-Off_Retract_Count -O--CK 200 200 000 - 11 193 Load_Cycle_Count -O--CK 197 197 000 - 10169 194 Temperature_Celsius -O---K 122 105 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 56 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 23/28 Celsius Lifetime Min/Max Temperature: 21/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (137) Index Estimated Time Temperature Celsius 138 2021-01-10 01:14 31 ************ ... ..( 7 skipped). .. ************ 146 2021-01-10 01:22 31 ************ 147 2021-01-10 01:23 32 ************* ... ..( 14 skipped). .. ************* 162 2021-01-10 01:38 32 ************* 163 2021-01-10 01:39 ? - 164 2021-01-10 01:40 23 **** ... ..( 2 skipped). .. **** 167 2021-01-10 01:43 23 **** 168 2021-01-10 01:44 24 ***** ... ..( 2 skipped). .. ***** 171 2021-01-10 01:47 24 ***** 172 2021-01-10 01:48 25 ****** ... ..( 2 skipped). .. ****** 175 2021-01-10 01:51 25 ****** 176 2021-01-10 01:52 26 ******* ... ..( 2 skipped). .. ******* 179 2021-01-10 01:55 26 ******* 180 2021-01-10 01:56 27 ******** ... ..( 4 skipped). .. ******** 185 2021-01-10 02:01 27 ******** 186 2021-01-10 02:02 28 ********* 187 2021-01-10 02:03 28 ********* 188 2021-01-10 02:04 26 ******* ... ..( 3 skipped). .. ******* 192 2021-01-10 02:08 26 ******* 193 2021-01-10 02:09 27 ******** ... ..( 2 skipped). .. ******** 196 2021-01-10 02:12 27 ******** 197 2021-01-10 02:13 28 ********* ... ..( 3 skipped). .. ********* 201 2021-01-10 02:17 28 ********* 202 2021-01-10 02:18 29 ********** ... ..( 5 skipped). .. ********** 208 2021-01-10 02:24 29 ********** 209 2021-01-10 02:25 30 *********** ... ..( 5 skipped). .. *********** 215 2021-01-10 02:31 30 *********** 216 2021-01-10 02:32 31 ************ ... ..( 8 skipped). .. ************ 225 2021-01-10 02:41 31 ************ 226 2021-01-10 02:42 32 ************* 227 2021-01-10 02:43 32 ************* 228 2021-01-10 02:44 ? - 229 2021-01-10 02:45 27 ******** ... ..( 2 skipped). .. ******** 232 2021-01-10 02:48 27 ******** 233 2021-01-10 02:49 28 ********* ... ..( 3 skipped). .. ********* 237 2021-01-10 02:53 28 ********* 238 2021-01-10 02:54 29 ********** 239 2021-01-10 02:55 29 ********** 240 2021-01-10 02:56 29 ********** 241 2021-01-10 02:57 30 *********** ... ..( 10 skipped). .. *********** 252 2021-01-10 03:08 30 *********** 253 2021-01-10 03:09 31 ************ ... ..( 8 skipped). .. ************ 262 2021-01-10 03:18 31 ************ 263 2021-01-10 03:19 32 ************* ... ..( 7 skipped). .. ************* 271 2021-01-10 03:27 32 ************* 272 2021-01-10 03:28 ? - 273 2021-01-10 03:29 26 ******* ... ..( 4 skipped). .. ******* 278 2021-01-10 03:34 26 ******* 279 2021-01-10 03:35 27 ******** ... ..( 2 skipped). .. ******** 282 2021-01-10 03:38 27 ******** 283 2021-01-10 03:39 28 ********* ... ..( 3 skipped). .. ********* 287 2021-01-10 03:43 28 ********* 288 2021-01-10 03:44 29 ********** ... ..( 5 skipped). .. ********** 294 2021-01-10 03:50 29 ********** 295 2021-01-10 03:51 30 *********** ... ..( 5 skipped). .. *********** 301 2021-01-10 03:57 30 *********** 302 2021-01-10 03:58 31 ************ 303 2021-01-10 03:59 31 ************ 304 2021-01-10 04:00 31 ************ 305 2021-01-10 04:01 ? - 306 2021-01-10 04:02 24 ***** ... ..( 3 skipped). .. ***** 310 2021-01-10 04:06 24 ***** 311 2021-01-10 04:07 25 ****** ... ..( 2 skipped). .. ****** 314 2021-01-10 04:10 25 ****** 315 2021-01-10 04:11 26 ******* 316 2021-01-10 04:12 26 ******* 317 2021-01-10 04:13 26 ******* 318 2021-01-10 04:14 27 ******** ... ..( 4 skipped). .. ******** 323 2021-01-10 04:19 27 ******** 324 2021-01-10 04:20 28 ********* ... ..( 3 skipped). .. ********* 328 2021-01-10 04:24 28 ********* 329 2021-01-10 04:25 29 ********** ... ..( 4 skipped). .. ********** 334 2021-01-10 04:30 29 ********** 335 2021-01-10 04:31 30 *********** 336 2021-01-10 04:32 30 *********** 337 2021-01-10 04:33 30 *********** 338 2021-01-10 04:34 ? - 339 2021-01-10 04:35 26 ******* ... ..( 3 skipped). .. ******* 343 2021-01-10 04:39 26 ******* 344 2021-01-10 04:40 27 ******** ... ..( 2 skipped). .. ******** 347 2021-01-10 04:43 27 ******** 348 2021-01-10 04:44 28 ********* ... ..( 2 skipped). .. ********* 351 2021-01-10 04:47 28 ********* 352 2021-01-10 04:48 29 ********** ... ..( 5 skipped). .. ********** 358 2021-01-10 04:54 29 ********** 359 2021-01-10 04:55 30 *********** ... ..( 4 skipped). .. *********** 364 2021-01-10 05:00 30 *********** 365 2021-01-10 05:01 31 ************ ... ..( 4 skipped). .. ************ 370 2021-01-10 05:06 31 ************ 371 2021-01-10 05:07 ? - 372 2021-01-10 05:08 28 ********* 373 2021-01-10 05:09 28 ********* 374 2021-01-10 05:10 28 ********* 375 2021-01-10 05:11 29 ********** ... ..( 3 skipped). .. ********** 379 2021-01-10 05:15 29 ********** 380 2021-01-10 05:16 30 *********** ... ..( 2 skipped). .. *********** 383 2021-01-10 05:19 30 *********** 384 2021-01-10 05:20 31 ************ ... ..( 4 skipped). .. ************ 389 2021-01-10 05:25 31 ************ 390 2021-01-10 05:26 32 ************* ... ..( 15 skipped). .. ************* 406 2021-01-10 05:42 32 ************* 407 2021-01-10 05:43 33 ************** ... ..( 13 skipped). .. ************** 421 2021-01-10 05:57 33 ************** 422 2021-01-10 05:58 ? - 423 2021-01-10 05:59 27 ******** ... ..( 3 skipped). .. ******** 427 2021-01-10 06:03 27 ******** 428 2021-01-10 06:04 28 ********* ... ..( 3 skipped). .. ********* 432 2021-01-10 06:08 28 ********* 433 2021-01-10 06:09 29 ********** ... ..( 5 skipped). .. ********** 439 2021-01-10 06:15 29 ********** 440 2021-01-10 06:16 30 *********** ... ..( 6 skipped). .. *********** 447 2021-01-10 06:23 30 *********** 448 2021-01-10 06:24 31 ************ ... ..( 5 skipped). .. ************ 454 2021-01-10 06:30 31 ************ 455 2021-01-10 06:31 ? - 456 2021-01-10 06:32 24 ***** 457 2021-01-10 06:33 25 ****** ... ..( 3 skipped). .. ****** 461 2021-01-10 06:37 25 ****** 462 2021-01-10 06:38 26 ******* ... ..( 3 skipped). .. ******* 466 2021-01-10 06:42 26 ******* 467 2021-01-10 06:43 27 ******** ... ..( 3 skipped). .. ******** 471 2021-01-10 06:47 27 ******** 472 2021-01-10 06:48 28 ********* ... ..( 3 skipped). .. ********* 476 2021-01-10 06:52 28 ********* 477 2021-01-10 06:53 29 ********** ... ..( 5 skipped). .. ********** 5 2021-01-10 06:59 29 ********** 6 2021-01-10 07:00 30 *********** ... ..( 3 skipped). .. *********** 10 2021-01-10 07:04 30 *********** 11 2021-01-10 07:05 ? - 12 2021-01-10 07:06 23 **** 13 2021-01-10 07:07 23 **** 14 2021-01-10 07:08 23 **** 15 2021-01-10 07:09 24 ***** ... ..( 2 skipped). .. ***** 18 2021-01-10 07:12 24 ***** 19 2021-01-10 07:13 25 ****** 20 2021-01-10 07:14 25 ****** 21 2021-01-10 07:15 25 ****** 22 2021-01-10 07:16 26 ******* ... ..( 3 skipped). .. ******* 26 2021-01-10 07:20 26 ******* 27 2021-01-10 07:21 27 ******** ... ..( 3 skipped). .. ******** 31 2021-01-10 07:25 27 ******** 32 2021-01-10 07:26 28 ********* ... ..( 4 skipped). .. ********* 37 2021-01-10 07:31 28 ********* 38 2021-01-10 07:32 29 ********** ... ..( 5 skipped). .. ********** 44 2021-01-10 07:38 29 ********** 45 2021-01-10 07:39 30 *********** ... ..( 7 skipped). .. *********** 53 2021-01-10 07:47 30 *********** 54 2021-01-10 07:48 31 ************ ... ..( 11 skipped). .. ************ 66 2021-01-10 08:00 31 ************ 67 2021-01-10 08:01 32 ************* ... ..( 15 skipped). .. ************* 83 2021-01-10 08:17 32 ************* 84 2021-01-10 08:18 33 ************** ... ..( 7 skipped). .. ************** 92 2021-01-10 08:26 33 ************** 93 2021-01-10 08:27 ? - 94 2021-01-10 08:28 23 **** 95 2021-01-10 08:29 23 **** 96 2021-01-10 08:30 23 **** 97 2021-01-10 08:31 24 ***** 98 2021-01-10 08:32 24 ***** 99 2021-01-10 08:33 24 ***** 100 2021-01-10 08:34 25 ****** ... ..( 3 skipped). .. ****** 104 2021-01-10 08:38 25 ****** 105 2021-01-10 08:39 26 ******* ... ..( 2 skipped). .. ******* 108 2021-01-10 08:42 26 ******* 109 2021-01-10 08:43 27 ******** ... ..( 3 skipped). .. ******** 113 2021-01-10 08:47 27 ******** 114 2021-01-10 08:48 28 ********* ... ..( 3 skipped). .. ********* 118 2021-01-10 08:52 28 ********* 119 2021-01-10 08:53 29 ********** ... ..( 6 skipped). .. ********** 126 2021-01-10 09:00 29 ********** 127 2021-01-10 09:01 30 *********** ... ..( 3 skipped). .. *********** 131 2021-01-10 09:05 30 *********** 132 2021-01-10 09:06 31 ************ ... ..( 4 skipped). .. ************ 137 2021-01-10 09:11 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3077 --- Lifetime Power-On Resets 0x01 0x010 4 2012 --- Power-on Hours 0x01 0x018 6 5587691806 --- Logical Sectors Written 0x01 0x020 6 4677023 --- Number of Write Commands 0x01 0x028 6 3551512401 --- Logical Sectors Read 0x01 0x030 6 15845308 --- Number of Read Commands 0x01 0x038 6 2948232704 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2005 --- Spindle Motor Power-on Hours 0x03 0x010 4 545 --- Head Flying Hours 0x03 0x018 4 10181 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 11 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 29 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 45 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x030 1 41 --- Highest Average Short Term Temperature 0x05 0x038 1 28 --- Lowest Average Short Term Temperature 0x05 0x040 1 33 --- Highest Average Long Term Temperature 0x05 0x048 1 31 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3080 --- Number of Hardware Resets 0x06 0x010 4 4 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1382 Vendor specific /dev/sde smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.5-arch1-1] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EADS-11M2B3 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jan 10 09:11:18 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 245) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 169 119 021 - 4508 4 Start_Stop_Count -O--CK 082 082 000 - 18444 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 079 079 000 - 16054 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5378 192 Power-Off_Retract_Count -O--CK 200 200 000 - 536 193 Load_Cycle_Count -O--CK 160 160 000 - 121928 194 Temperature_Celsius -O---K 111 087 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 36/36 Celsius Lifetime Min/Max Temperature: 19/60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (270) Index Estimated Time Temperature Celsius 271 2021-01-10 01:14 36 ***************** ... ..(244 skipped). .. ***************** 38 2021-01-10 05:19 36 ***************** 39 2021-01-10 05:20 ? - 40 2021-01-10 05:21 36 ***************** 41 2021-01-10 05:22 ? - 42 2021-01-10 05:23 36 ***************** ... ..(227 skipped). .. ***************** 270 2021-01-10 09:11 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1353 Vendor specific