/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.12.xm1-1.klp-xanmod-rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547550A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JE3OA60A User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Dec 13 21:07:19 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 152) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 197 197 040 - 170 3 Spin_Up_Time POS--- 176 176 033 - 1 4 Start_Stop_Count -O--C- 097 097 000 - 5644 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 117 117 040 - 33 9 Power_On_Hours -O--C- 079 079 000 - 9540 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 4310 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 88 193 Load_Cycle_Count -O--C- 069 069 000 - 318659 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 6/48) 196 Reallocated_Event_Count -O--CK 100 100 000 - 19 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 22/33 Celsius Lifetime Min/Max Temperature: 6/48 Celsius Specified Max Operating Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2022-12-13 19:00 31 ************ 6 2022-12-13 19:01 32 ************* ... ..( 6 skipped). .. ************* 13 2022-12-13 19:08 32 ************* 14 2022-12-13 19:09 31 ************ 15 2022-12-13 19:10 32 ************* 16 2022-12-13 19:11 31 ************ ... ..( 10 skipped). .. ************ 27 2022-12-13 19:22 31 ************ 28 2022-12-13 19:23 32 ************* 29 2022-12-13 19:24 32 ************* 30 2022-12-13 19:25 32 ************* 31 2022-12-13 19:26 33 ************** 32 2022-12-13 19:27 32 ************* ... ..( 8 skipped). .. ************* 41 2022-12-13 19:36 32 ************* 42 2022-12-13 19:37 31 ************ 43 2022-12-13 19:38 ? - 44 2022-12-13 19:39 23 **** 45 2022-12-13 19:40 24 ***** 46 2022-12-13 19:41 24 ***** 47 2022-12-13 19:42 25 ****** 48 2022-12-13 19:43 25 ****** 49 2022-12-13 19:44 26 ******* 50 2022-12-13 19:45 26 ******* 51 2022-12-13 19:46 27 ******** 52 2022-12-13 19:47 28 ********* ... ..( 3 skipped). .. ********* 56 2022-12-13 19:51 28 ********* 57 2022-12-13 19:52 29 ********** 58 2022-12-13 19:53 29 ********** 59 2022-12-13 19:54 30 *********** ... ..( 4 skipped). .. *********** 64 2022-12-13 19:59 30 *********** 65 2022-12-13 20:00 31 ************ ... ..( 22 skipped). .. ************ 88 2022-12-13 20:23 31 ************ 89 2022-12-13 20:24 32 ************* 90 2022-12-13 20:25 32 ************* 91 2022-12-13 20:26 31 ************ 92 2022-12-13 20:27 31 ************ 93 2022-12-13 20:28 32 ************* ... ..( 16 skipped). .. ************* 110 2022-12-13 20:45 32 ************* 111 2022-12-13 20:46 33 ************** ... ..( 11 skipped). .. ************** 123 2022-12-13 20:58 33 ************** 124 2022-12-13 20:59 32 ************* 125 2022-12-13 21:00 33 ************** 126 2022-12-13 21:01 33 ************** 127 2022-12-13 21:02 32 ************* 0 2022-12-13 21:03 32 ************* 1 2022-12-13 21:04 32 ************* 2 2022-12-13 21:05 33 ************** 3 2022-12-13 21:06 32 ************* 4 2022-12-13 21:07 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS