/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.15.0-desktop-0.rc2.3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Apple SD/SM/TS...E/F/G SSDs Device Model: APPLE SSD SD0128F Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: A223321 User Capacity: 121,332,826,112 bytes [121 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 3.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 1 11:55:18 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 40 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 000 - 0 5 Reallocated_Sector_Ct POSR-- 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 16355 12 Power_Cycle_Count -O--CK 100 100 000 - 13889 169 Unknown_Apple_Attrib -O---K 100 100 010 - 803332949728 173 Wear_Leveling_Count -O---K 183 183 100 - 1434554270127 174 Host_Reads_MiB ----CK 100 100 000 - 33349033 175 Host_Writes_MiB ----CK 100 100 000 - 26112379 192 Power-Off_Retract_Count -O--CK 100 100 000 - 845 194 Temperature_Celsius -O---K 050 050 000 - 50 (Min/Max 17/84) 197 Current_Pending_Sector -O--CK 000 000 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 244 Unknown_Attribute -O---- 000 000 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xaa GPL,SL VS 4 Device vendor specific log 0xab GPL,SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported Read SMART Self-test Log failed: scsi error badly formed scsi parameters Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.15.0-desktop-0.rc2.3omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 2TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT01B6Q User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 1 11:55:18 2025 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 160) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 059 059 010 - 974 9 Power_On_Hours -O--CK 096 096 000 - 19911 12 Power_Cycle_Count -O--CK 097 097 000 - 2856 177 Wear_Leveling_Count PO--C- 099 099 000 - 12 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 059 059 010 - 974 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 059 059 010 - 974 187 Uncorrectable_Error_Cnt -O--CK 099 099 000 - 5446 190 Airflow_Temperature_Cel -O--CK 076 029 000 - 24 195 ECC_Error_Rate -O-RC- 199 199 000 - 5446 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 329 241 Total_LBAs_Written -O--CK 099 099 000 - 32733532127 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 5446 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5446 [1] occurred at disk power-on lifetime: 19637 hours (818 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 a0 00 00 0f 66 25 08 40 00 Error: UNC at LBA = 0x0f662508 = 258352392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a0 00 00 0f 66 25 08 40 14 02:06:55.887 READ FPDMA QUEUED 47 00 00 00 01 00 00 00 00 00 00 40 13 02:06:55.887 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 06 30 40 13 02:06:55.887 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 30 40 13 02:06:55.887 READ LOG DMA EXT 47 00 00 00 01 00 00 00 00 00 00 40 13 02:06:55.887 READ LOG DMA EXT Error 5445 [0] occurred at disk power-on lifetime: 19637 hours (818 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 98 00 00 0f 66 25 08 40 00 Error: UNC at LBA = 0x0f662508 = 258352392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 98 00 00 0f 66 25 08 40 13 02:06:55.664 READ FPDMA QUEUED 60 00 08 00 90 00 00 0f 66 25 00 40 12 02:06:55.664 READ FPDMA QUEUED 60 00 08 00 88 00 00 0f 66 24 f8 40 11 02:06:55.664 READ FPDMA QUEUED 60 00 08 00 18 00 00 0f 66 24 f0 40 03 02:06:55.664 READ FPDMA QUEUED 60 00 08 00 10 00 00 0f 66 24 e8 40 02 02:06:55.664 READ FPDMA QUEUED Error 5444 [3] occurred at disk power-on lifetime: 19637 hours (818 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 38 00 00 0f 66 20 30 40 00 Error: UNC at LBA = 0x0f662030 = 258351152 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 0a 00 00 38 00 00 0f 66 20 30 40 07 02:06:55.424 READ FPDMA QUEUED 60 00 08 00 30 00 00 5a 7d 68 a8 40 06 02:06:55.424 READ FPDMA QUEUED 60 00 08 00 28 00 00 5a 40 47 f8 40 05 02:06:55.424 READ FPDMA QUEUED 60 00 08 00 20 00 00 5a 40 45 48 40 04 02:06:55.424 READ FPDMA QUEUED 60 00 08 00 18 00 00 59 fd fc 80 40 03 02:06:55.424 READ FPDMA QUEUED Error 5443 [2] occurred at disk power-on lifetime: 19478 hours (811 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 28 00 00 0f 14 9c 58 40 00 Error: UNC at LBA = 0x0f149c58 = 253008984 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 28 00 00 0f 14 9c 58 40 05 06:59:12.297 READ FPDMA QUEUED 60 00 08 00 20 00 00 0f 14 9c 50 40 04 06:59:12.297 READ FPDMA QUEUED 60 00 08 00 18 00 00 0f 14 9c 48 40 03 06:59:12.297 READ FPDMA QUEUED 60 00 08 00 10 00 00 0f 14 9c 40 40 02 06:59:12.297 READ FPDMA QUEUED 60 00 08 00 08 00 00 0f 14 9c 38 40 01 06:59:12.297 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 19/19 Celsius Lifetime Min/Max Temperature: 19/71 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2025-08-31 14:40 47 **************************** ... ..( 17 skipped). .. **************************** 98 2025-08-31 17:40 47 **************************** 99 2025-08-31 17:50 ? - 100 2025-08-31 18:00 57 ************************************** 101 2025-08-31 18:10 51 ******************************** 102 2025-08-31 18:20 49 ****************************** 103 2025-08-31 18:30 48 ***************************** ... ..( 2 skipped). .. ***************************** 106 2025-08-31 19:00 48 ***************************** 107 2025-08-31 19:10 47 **************************** 108 2025-08-31 19:20 48 ***************************** 109 2025-08-31 19:30 47 **************************** 110 2025-08-31 19:40 47 **************************** 111 2025-08-31 19:50 48 ***************************** 112 2025-08-31 20:00 47 **************************** 113 2025-08-31 20:10 47 **************************** 114 2025-08-31 20:20 46 *************************** 115 2025-08-31 20:30 45 ************************** 116 2025-08-31 20:40 45 ************************** 117 2025-08-31 20:50 44 ************************* 118 2025-08-31 21:00 44 ************************* 119 2025-08-31 21:10 43 ************************ ... ..( 2 skipped). .. ************************ 122 2025-08-31 21:40 43 ************************ 123 2025-08-31 21:50 ? - 124 2025-08-31 22:00 30 *********** 125 2025-08-31 22:10 31 ************ 126 2025-08-31 22:20 34 *************** 127 2025-08-31 22:30 37 ****************** 0 2025-08-31 22:40 40 ********************* 1 2025-08-31 22:50 42 *********************** 2 2025-08-31 23:00 43 ************************ 3 2025-08-31 23:10 44 ************************* 4 2025-08-31 23:20 45 ************************** 5 2025-08-31 23:30 45 ************************** 6 2025-08-31 23:40 46 *************************** ... ..( 26 skipped). .. *************************** 33 2025-09-01 04:10 46 *************************** 34 2025-09-01 04:20 47 **************************** 35 2025-09-01 04:30 47 **************************** 36 2025-09-01 04:40 47 **************************** 37 2025-09-01 04:50 46 *************************** 38 2025-09-01 05:00 46 *************************** 39 2025-09-01 05:10 47 **************************** ... ..( 23 skipped). .. **************************** 63 2025-09-01 09:10 47 **************************** 64 2025-09-01 09:20 53 ********************************** 65 2025-09-01 09:30 51 ******************************** 66 2025-09-01 09:40 58 *************************************** 67 2025-09-01 09:50 49 ****************************** 68 2025-09-01 10:00 49 ****************************** 69 2025-09-01 10:10 48 ***************************** 70 2025-09-01 10:20 48 ***************************** 71 2025-09-01 10:30 47 **************************** 72 2025-09-01 10:40 46 *************************** 73 2025-09-01 10:50 46 *************************** 74 2025-09-01 11:00 45 ************************** 75 2025-09-01 11:10 44 ************************* ... ..( 2 skipped). .. ************************* 78 2025-09-01 11:40 44 ************************* 79 2025-09-01 11:50 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2856 --- Lifetime Power-On Resets 0x01 0x010 4 19911 --- Power-on Hours 0x01 0x018 6 32733532127 --- Logical Sectors Written 0x01 0x020 6 514746095 --- Number of Write Commands 0x01 0x028 6 47318089202 --- Logical Sectors Read 0x01 0x030 6 1301539714 --- Number of Read Commands 0x01 0x038 6 2601000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 5446 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 24 --- Current Temperature 0x05 0x020 1 71 --- Highest Temperature 0x05 0x028 1 19 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 6129 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC