/dev/sda === START OF INFORMATION SECTION === Device Model: INTEL SSDSA2BW160G3H Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: 4PC10365 User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Sep 24 19:20:10 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0002 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 17) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x75) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 22) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time -----K 100 100 000 - 0 4 Start_Stop_Count ----CK 100 100 000 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 7 9 Power_On_Hours -O--CK 100 100 000 - 4111 12 Power_Cycle_Count -O--CK 100 100 000 - 1222 170 Unknown_Attribute PO--CK 100 100 010 - 0 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 010 - 816 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 94 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 225 Unknown_SSD_Attribute -O--CK 100 100 000 - 207673 226 Unknown_SSD_Attribute -O--CK 100 100 000 - 937 227 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 228 Power-off_Retract_Count -O--CK 100 100 000 - 246672 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 207673 242 Total_LBAs_Read -O--CK 100 100 000 - 215785 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 8 Comprehensive SMART error log 0x03 GPL,SL R/O 8 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (8 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Stand-by (1) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 Read SCT Data Table failed: scsi error badly formed scsi parameters Read SCT Temperature History failed SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1222 --- Lifetime Power-On Resets 0x01 0x010 4 4111 --- Power-on Hours 0x01 0x018 6 13610089233 --- Logical Sectors Written 0x01 0x020 6 170752212 --- Number of Write Commands 0x01 0x028 6 14141734779 --- Logical Sectors Read 0x01 0x030 6 205732031 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 11243 --- Number of Hardware Resets 0x06 0x010 4 110405 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 34 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 62 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3B0 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 24 19:20:10 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 189) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 198 198 040 - 96 3 Spin_Up_Time POS--- 176 176 033 - 2 4 Start_Stop_Count -O--C- 097 097 000 - 5239 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 115 115 040 - 34 9 Power_On_Hours -O--C- 071 071 000 - 12949 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2905 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 189 193 Load_Cycle_Count -O--C- 079 079 000 - 217371 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max -3/49) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 10 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 10 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 [1] occurred at disk power-on lifetime: 7650 hours (318 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 60 00 00 0a 05 f2 28 0a 00 Error: ICRC, ABRT at LBA = 0x0a05f228 = 168161832 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 30 00 00 04 4a 2b 4a 40 00 02:39:40.393 READ FPDMA QUEUED 61 00 08 00 20 00 00 04 93 20 b8 40 00 02:39:40.392 WRITE FPDMA QUEUED 61 00 08 00 18 00 00 04 96 59 b8 40 00 02:39:40.392 WRITE FPDMA QUEUED 61 00 08 00 10 00 00 04 8f 6d 38 40 00 02:39:40.392 WRITE FPDMA QUEUED 61 00 01 00 00 00 00 04 35 26 48 40 00 02:39:40.392 WRITE FPDMA QUEUED Error 9 [0] occurred at disk power-on lifetime: 7059 hours (294 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 05 67 63 67 05 00 Error: ICRC, ABRT at LBA = 0x05676367 = 90661735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 c0 00 00 05 67 63 60 40 00 02:14:34.766 WRITE FPDMA QUEUED 60 00 20 00 b8 00 00 05 67 03 b8 40 00 02:14:34.766 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 02:14:34.764 IDENTIFY DEVICE 60 00 20 00 01 00 00 05 67 63 67 05 ff 02:14:34.720 READ FPDMA QUEUED 60 00 20 00 a8 00 00 05 67 03 b8 40 00 02:14:34.718 READ FPDMA QUEUED Error 8 [3] occurred at disk power-on lifetime: 7059 hours (294 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 05 67 63 67 05 00 Error: ICRC, ABRT at LBA = 0x05676367 = 90661735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 a8 00 00 05 67 03 b8 40 00 02:14:34.718 READ FPDMA QUEUED 61 00 08 00 a0 00 00 05 67 63 60 40 00 02:14:34.718 WRITE FPDMA QUEUED 61 00 01 00 98 00 00 06 cf 8d 93 40 00 02:14:34.669 WRITE FPDMA QUEUED 61 00 01 00 90 00 00 06 cf 8d 92 40 00 02:14:34.669 WRITE FPDMA QUEUED 61 00 03 00 88 00 00 06 cf 8d 8f 40 00 02:14:34.668 WRITE FPDMA QUEUED Error 7 [2] occurred at disk power-on lifetime: 7056 hours (294 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 04 33 67 9f 04 00 Error: ICRC, ABRT at LBA = 0x0433679f = 70477727 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 b8 00 00 04 33 5b 30 40 00 00:30:31.905 WRITE FPDMA QUEUED 61 00 08 00 b0 00 00 04 33 67 98 40 00 00:30:31.905 WRITE FPDMA QUEUED 61 00 08 00 a8 00 00 04 96 ff 08 40 00 00:30:31.905 WRITE FPDMA QUEUED 61 00 80 00 a0 00 00 04 39 4e a8 40 00 00:30:31.905 WRITE FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 40 00 00:30:31.904 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 18/32 Celsius Lifetime Min/Max Temperature: -3/49 Celsius Lifetime Average Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (85) Index Estimated Time Temperature Celsius 86 2017-09-24 17:13 29 ********** ... ..( 7 skipped). .. ********** 94 2017-09-24 17:21 29 ********** 95 2017-09-24 17:22 28 ********* 96 2017-09-24 17:23 28 ********* 97 2017-09-24 17:24 28 ********* 98 2017-09-24 17:25 27 ******** ... ..( 3 skipped). .. ******** 102 2017-09-24 17:29 27 ******** 103 2017-09-24 17:30 28 ********* ... ..( 5 skipped). .. ********* 109 2017-09-24 17:36 28 ********* 110 2017-09-24 17:37 29 ********** ... ..( 3 skipped). .. ********** 114 2017-09-24 17:41 29 ********** 115 2017-09-24 17:42 30 *********** ... ..( 4 skipped). .. *********** 120 2017-09-24 17:47 30 *********** 121 2017-09-24 17:48 29 ********** 122 2017-09-24 17:49 29 ********** 123 2017-09-24 17:50 30 *********** 124 2017-09-24 17:51 30 *********** 125 2017-09-24 17:52 29 ********** 126 2017-09-24 17:53 30 *********** 127 2017-09-24 17:54 30 *********** 0 2017-09-24 17:55 29 ********** 1 2017-09-24 17:56 30 *********** 2 2017-09-24 17:57 29 ********** ... ..( 28 skipped). .. ********** 31 2017-09-24 18:26 29 ********** 32 2017-09-24 18:27 30 *********** 33 2017-09-24 18:28 30 *********** 34 2017-09-24 18:29 30 *********** 35 2017-09-24 18:30 29 ********** 36 2017-09-24 18:31 30 *********** ... ..( 8 skipped). .. *********** 45 2017-09-24 18:40 30 *********** 46 2017-09-24 18:41 31 ************ 47 2017-09-24 18:42 31 ************ 48 2017-09-24 18:43 30 *********** 49 2017-09-24 18:44 31 ************ ... ..( 4 skipped). .. ************ 54 2017-09-24 18:49 31 ************ 55 2017-09-24 18:50 32 ************* ... ..( 29 skipped). .. ************* 85 2017-09-24 19:20 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 34 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 34 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS