/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 1TB Serial Number: -- Firmware Version: 3B4QFXO7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 5 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Utilization: 705,854,693,376 [705 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Fri Aug 11 21:42:51 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x10): NP_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.24W - - 0 0 0 0 0 0 1 + 4.49W - - 1 1 1 1 0 0 2 + 2.19W - - 2 2 2 2 0 500 3 - 0.0500W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 1000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 41 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 174,289,359 [89.2 TB] Data Units Written: 34,756,530 [17.7 TB] Host Read Commands: 1,256,513,237 Host Write Commands: 162,242,852 Controller Busy Time: 1,126 Power Cycles: 68 Power On Hours: 6,336 Unsafe Shutdowns: 29 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 41 Celsius Temperature Sensor 2: 52 Celsius Thermal Temp. 2 Transition Count: 60 Thermal Temp. 2 Total Time: 9 Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 500GB Serial Number: -- Firmware Version: 2B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 10,157,195,264 [10.1 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Fri Aug 11 21:42:51 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 48 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 54,376,386 [27.8 TB] Data Units Written: 22,156,684 [11.3 TB] Host Read Commands: 360,956,323 Host Write Commands: 68,977,474 Controller Busy Time: 645 Power Cycles: 153 Power On Hours: 10,259 Unsafe Shutdowns: 50 Media and Data Integrity Errors: 0 Error Information Log Entries: 3,900 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 48 Celsius Temperature Sensor 2: 52 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 3900 0 0x0018 0x4004 - 0 0 - Invalid Field in Command Self-test Log (NVMe Log 0x06) Self-test status: No self-test in progress No Self-tests Logged /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 11 21:42:51 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 090 090 000 - 46411 12 Power_Cycle_Count -O--CK 098 098 000 - 1987 177 Wear_Leveling_Count PO--C- 097 097 000 - 48 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 066 039 000 - 34 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 62 241 Total_LBAs_Written -O--CK 099 099 000 - 50932769210 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 34/36 Celsius Lifetime Min/Max Temperature: 28/61 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (72) Index Estimated Time Temperature Celsius 73 2023-08-11 00:30 35 **************** 74 2023-08-11 00:40 35 **************** 75 2023-08-11 00:50 36 ***************** 76 2023-08-11 01:00 36 ***************** 77 2023-08-11 01:10 35 **************** ... ..( 3 skipped). .. **************** 81 2023-08-11 01:50 35 **************** 82 2023-08-11 02:00 34 *************** ... ..( 23 skipped). .. *************** 106 2023-08-11 06:00 34 *************** 107 2023-08-11 06:10 33 ************** 108 2023-08-11 06:20 33 ************** 109 2023-08-11 06:30 34 *************** ... ..( 12 skipped). .. *************** 122 2023-08-11 08:40 34 *************** 123 2023-08-11 08:50 33 ************** ... ..( 34 skipped). .. ************** 30 2023-08-11 14:40 33 ************** 31 2023-08-11 14:50 34 *************** ... ..( 5 skipped). .. *************** 37 2023-08-11 15:50 34 *************** 38 2023-08-11 16:00 35 **************** ... ..( 6 skipped). .. **************** 45 2023-08-11 17:10 35 **************** 46 2023-08-11 17:20 36 ***************** ... ..( 11 skipped). .. ***************** 58 2023-08-11 19:20 36 ***************** 59 2023-08-11 19:30 ? - 60 2023-08-11 19:40 36 ***************** ... ..( 4 skipped). .. ***************** 65 2023-08-11 20:30 36 ***************** 66 2023-08-11 20:40 35 **************** 67 2023-08-11 20:50 36 ***************** 68 2023-08-11 21:00 36 ***************** 69 2023-08-11 21:10 35 **************** 70 2023-08-11 21:20 35 **************** 71 2023-08-11 21:30 34 *************** 72 2023-08-11 21:40 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 296 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD40EZRX-00SPEB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 11 21:42:51 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (52380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 524) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 53648 3 Spin_Up_Time POS--K 223 178 021 - 5816 4 Start_Stop_Count -O--CK 095 095 000 - 5020 5 Reallocated_Sector_Ct PO--CK 189 189 140 - 346 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 012 012 000 - 64407 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2282 192 Power-Off_Retract_Count -O--CK 200 200 000 - 131 193 Load_Cycle_Count -O--CK 001 001 000 - 934595 194 Temperature_Celsius -O---K 111 099 000 - 41 196 Reallocated_Event_Count -O--CK 186 001 000 - 14 197 Current_Pending_Sector -O--CK 200 200 000 - 14 198 Offline_Uncorrectable ----CK 200 200 000 - 14 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 199 187 000 - 505 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5881 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5881 [0] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a8 00 01 99 c5 79 b0 40 08 4d+15:14:37.148 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 4d+15:14:37.148 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 4d+15:14:37.148 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 4d+15:14:37.148 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 4d+15:14:37.147 IDENTIFY DEVICE Error 5880 [23] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 98 00 01 99 c5 79 b0 40 08 4d+15:14:33.705 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 4d+15:14:33.705 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 4d+15:14:33.705 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 4d+15:14:33.705 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 4d+15:14:33.704 IDENTIFY DEVICE Error 5879 [22] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 90 00 01 99 c5 79 b0 40 08 4d+15:14:30.244 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 4d+15:14:30.244 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 4d+15:14:30.244 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 4d+15:14:30.244 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 4d+15:14:30.244 IDENTIFY DEVICE Error 5878 [21] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c8 00 01 99 c5 79 b0 40 08 4d+15:14:26.778 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 4d+15:14:26.777 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 4d+15:14:26.777 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 4d+15:14:26.777 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 4d+15:14:26.777 IDENTIFY DEVICE Error 5877 [20] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 90 00 01 99 c5 79 b0 40 08 4d+15:14:23.340 READ FPDMA QUEUED 60 00 08 00 88 00 01 99 c5 79 a8 40 08 4d+15:14:23.340 READ FPDMA QUEUED 60 00 08 00 80 00 01 99 c5 79 a0 40 08 4d+15:14:23.340 READ FPDMA QUEUED 60 00 08 00 78 00 01 99 c5 79 98 40 08 4d+15:14:23.340 READ FPDMA QUEUED 60 00 08 00 70 00 01 99 c5 79 90 40 08 4d+15:14:23.340 READ FPDMA QUEUED Error 5876 [19] occurred at disk power-on lifetime: 64054 hours (2668 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 01 99 c5 79 b0 40 00 Error: UNC at LBA = 0x199c579b0 = 6874823088 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 58 00 01 99 c5 78 e0 40 08 4d+15:14:19.851 READ FPDMA QUEUED 60 01 00 00 50 00 01 99 c5 77 e0 40 08 4d+15:14:19.851 READ FPDMA QUEUED 60 01 00 00 48 00 01 99 c5 76 e0 40 08 4d+15:14:19.849 READ FPDMA QUEUED 60 01 00 00 40 00 01 99 c5 75 e0 40 08 4d+15:14:19.847 READ FPDMA QUEUED 60 01 00 00 38 00 01 99 c5 74 e0 40 08 4d+15:14:19.847 READ FPDMA QUEUED Error 5875 [18] occurred at disk power-on lifetime: 64029 hours (2667 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a7 3f ec 98 40 00 Error: UNC at LBA = 0xa73fec98 = 2805984408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 d0 00 00 a7 3f ec 98 40 08 3d+14:10:23.164 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 3d+14:10:23.164 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 3d+14:10:23.164 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 3d+14:10:23.163 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 3d+14:10:23.163 IDENTIFY DEVICE Error 5874 [17] occurred at disk power-on lifetime: 64029 hours (2667 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 a7 3f ec 98 40 00 Error: UNC at LBA = 0xa73fec98 = 2805984408 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 48 00 00 a7 3f ec 98 40 08 3d+14:10:19.720 READ FPDMA QUEUED ef 00 10 00 03 00 00 00 00 00 00 a0 08 3d+14:10:19.720 SET FEATURES [Enable SATA feature] ef 00 10 00 02 00 00 00 00 00 00 a0 08 3d+14:10:19.720 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 3d+14:10:19.720 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 3d+14:10:19.720 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 41/43 Celsius Lifetime Min/Max Temperature: 3/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (225) Index Estimated Time Temperature Celsius 226 2023-08-11 13:45 43 ************************ ... ..( 28 skipped). .. ************************ 255 2023-08-11 14:14 43 ************************ 256 2023-08-11 14:15 42 *********************** ... ..( 36 skipped). .. *********************** 293 2023-08-11 14:52 42 *********************** 294 2023-08-11 14:53 41 ********************** ... ..( 12 skipped). .. ********************** 307 2023-08-11 15:06 41 ********************** 308 2023-08-11 15:07 40 ********************* ... ..(123 skipped). .. ********************* 432 2023-08-11 17:11 40 ********************* 433 2023-08-11 17:12 41 ********************** ... ..( 97 skipped). .. ********************** 53 2023-08-11 18:50 41 ********************** 54 2023-08-11 18:51 42 *********************** ... ..(122 skipped). .. *********************** 177 2023-08-11 20:54 42 *********************** 178 2023-08-11 20:55 ? - 179 2023-08-11 20:56 43 ************************ ... ..( 45 skipped). .. ************************ 225 2023-08-11 21:42 43 ************************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5820 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 40 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 8367 Vendor specific /dev/sdc smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Skyhawk Device Model: ST4000VX007-2DT166 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CV11 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 11 21:42:52 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 581) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 601) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 075 064 044 - 33482400 3 Spin_Up_Time PO---- 095 094 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3366 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 094 060 045 - 2684343774 9 Power_On_Hours -O--CK 080 080 000 - 18220h+00m+00.000s 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 67 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 054 040 - 37 (Min/Max 37/39) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2917 193 Load_Cycle_Count -O--CK 093 093 000 - 15072 194 Temperature_Celsius -O---K 037 046 000 - 37 (0 22 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 15297h+30m+42.605s 241 Total_LBAs_Written ------ 100 253 000 - 16639421529 242 Total_LBAs_Read ------ 100 253 000 - 84009170677 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xd1 GPL VS 136 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 37/39 Celsius Lifetime Min/Max Temperature: 22/47 Celsius Under/Over Temperature Limit Count: 0/3 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (31) Index Estimated Time Temperature Celsius 32 2023-08-06 16:03 36 ***************** 33 2023-08-06 17:02 37 ****************** 34 2023-08-06 18:01 39 ******************** ... ..( 2 skipped). .. ******************** 37 2023-08-06 20:58 39 ******************** 38 2023-08-06 21:57 38 ******************* 39 2023-08-06 22:56 37 ****************** 40 2023-08-06 23:55 36 ***************** ... ..( 2 skipped). .. ***************** 43 2023-08-07 02:52 36 ***************** 44 2023-08-07 03:51 37 ****************** 45 2023-08-07 04:50 36 ***************** 46 2023-08-07 05:49 36 ***************** 47 2023-08-07 06:48 35 **************** 48 2023-08-07 07:47 36 ***************** ... ..( 11 skipped). .. ***************** 60 2023-08-07 19:35 36 ***************** 61 2023-08-07 20:34 37 ****************** ... ..( 2 skipped). .. ****************** 64 2023-08-07 23:31 37 ****************** 65 2023-08-08 00:30 36 ***************** ... ..( 11 skipped). .. ***************** 77 2023-08-08 12:18 36 ***************** 78 2023-08-08 13:17 35 **************** 79 2023-08-08 14:16 35 **************** 80 2023-08-08 15:15 35 **************** 81 2023-08-08 16:14 36 ***************** ... ..( 3 skipped). .. ***************** 85 2023-08-08 20:10 36 ***************** 86 2023-08-08 21:09 37 ****************** ... ..( 4 skipped). .. ****************** 91 2023-08-09 02:04 37 ****************** 92 2023-08-09 03:03 36 ***************** 93 2023-08-09 04:02 37 ****************** 94 2023-08-09 05:01 37 ****************** 95 2023-08-09 06:00 38 ******************* ... ..( 2 skipped). .. ******************* 98 2023-08-09 08:57 38 ******************* 99 2023-08-09 09:56 37 ****************** 100 2023-08-09 10:55 38 ******************* 101 2023-08-09 11:54 38 ******************* 102 2023-08-09 12:53 37 ****************** 103 2023-08-09 13:52 37 ****************** 104 2023-08-09 14:51 36 ***************** 105 2023-08-09 15:50 35 **************** 106 2023-08-09 16:49 36 ***************** 107 2023-08-09 17:48 36 ***************** 108 2023-08-09 18:47 38 ******************* 109 2023-08-09 19:46 38 ******************* 110 2023-08-09 20:45 41 ********************** 111 2023-08-09 21:44 39 ******************** 112 2023-08-09 22:43 39 ******************** 113 2023-08-09 23:42 38 ******************* 114 2023-08-10 00:41 38 ******************* 115 2023-08-10 01:40 36 ***************** ... ..( 2 skipped). .. ***************** 118 2023-08-10 04:37 36 ***************** 119 2023-08-10 05:36 35 **************** 120 2023-08-10 06:35 36 ***************** ... ..( 9 skipped). .. ***************** 2 2023-08-10 16:25 36 ***************** 3 2023-08-10 17:24 37 ****************** 4 2023-08-10 18:23 38 ******************* 5 2023-08-10 19:22 38 ******************* 6 2023-08-10 20:21 37 ****************** 7 2023-08-10 21:20 38 ******************* 8 2023-08-10 22:19 36 ***************** ... ..( 5 skipped). .. ***************** 14 2023-08-11 04:13 36 ***************** 15 2023-08-11 05:12 35 **************** 16 2023-08-11 06:11 35 **************** 17 2023-08-11 07:10 36 ***************** 18 2023-08-11 08:09 35 **************** ... ..( 4 skipped). .. **************** 23 2023-08-11 13:04 35 **************** 24 2023-08-11 14:03 36 ***************** 25 2023-08-11 15:02 36 ***************** 26 2023-08-11 16:01 37 ****************** 27 2023-08-11 17:00 38 ******************* 28 2023-08-11 17:59 ? - 29 2023-08-11 18:58 38 ******************* 30 2023-08-11 19:57 39 ******************** 31 2023-08-11 20:56 38 ******************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 67 --- Lifetime Power-On Resets 0x01 0x010 4 18220 --- Power-on Hours 0x01 0x018 6 16639223667 --- Logical Sectors Written 0x01 0x020 6 71781529 --- Number of Write Commands 0x01 0x028 6 84008335544 --- Logical Sectors Read 0x01 0x030 6 573680052 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 4113520905 N-- Spindle Motor Power-on Hours 0x03 0x010 4 4113506383 N-- Head Flying Hours 0x03 0x018 4 15072 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 2918 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 36 --- Average Short Term Temperature 0x05 0x018 1 37 --- Average Long Term Temperature 0x05 0x020 1 46 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 43 --- Highest Average Short Term Temperature 0x05 0x038 1 32 --- Lowest Average Short Term Temperature 0x05 0x040 1 41 --- Highest Average Long Term Temperature 0x05 0x048 1 35 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 5115 --- Number of Hardware Resets 0x06 0x010 4 698 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS Seagate FARM log (GP Log 0xa6) supported [try: -l farm] /dev/sdd smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.4.9-arch1-1] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 11 21:42:52 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 1 9 Power_On_Hours -O--CK 087 087 000 - 64496 12 Power_Cycle_Count -O--CK 097 097 000 - 2298 177 Wear_Leveling_Count PO--C- 073 073 000 - 560 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 1 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 099 099 010 - 1 183 Runtime_Bad_Block PO--C- 099 099 010 - 1 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 040 000 - 32 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 112 241 Total_LBAs_Written -O--CK 099 099 000 - 153709421568 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 1 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/40 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2023-08-11 00:30 ? - ... ..(112 skipped). .. - 127 2023-08-11 19:20 ? - 0 2023-08-11 19:30 40 ********************* 1 2023-08-11 19:40 36 ***************** 2 2023-08-11 19:50 35 **************** 3 2023-08-11 20:00 35 **************** 4 2023-08-11 20:10 34 *************** 5 2023-08-11 20:20 35 **************** 6 2023-08-11 20:30 34 *************** 7 2023-08-11 20:40 37 ****************** 8 2023-08-11 20:50 35 **************** 9 2023-08-11 21:00 35 **************** 10 2023-08-11 21:10 33 ************** ... ..( 2 skipped). .. ************** 13 2023-08-11 21:40 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2642 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC