Probe #d412197c51 of ASUSTek P7H55-USB3 Desktop Computer

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3160318AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC34 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jan 16 01:54:36 2023 +09 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 38) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 174058735 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1355 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 087 060 030 - 486225084 9 Power_On_Hours -O--CK 049 049 000 - 44895 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 037 020 - 1356 183 Runtime_Bad_Block ------ 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 262396 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 050 045 - 38 (Min/Max 24/38) 194 Temperature_Celsius -O---K 038 050 000 - 38 (0 17 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 060 038 000 - 174058735 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 48629 (93 159 0) 241 Total_LBAs_Written ------ 100 253 000 - 42349824 242 Total_LBAs_Read ------ 100 253 000 - 707334865 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL,SL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 00% 44689 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 24/38 Celsius Lifetime Min/Max Temperature: 17/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (33) Index Estimated Time Temperature Celsius 34 2023-01-10 20:42 38 ******************* 35 2023-01-10 21:41 38 ******************* 36 2023-01-10 22:40 38 ******************* 37 2023-01-10 23:39 39 ******************** 38 2023-01-11 00:38 39 ******************** 39 2023-01-11 01:37 39 ******************** 40 2023-01-11 02:36 ? - 41 2023-01-11 03:35 23 **** 42 2023-01-11 04:34 23 **** 43 2023-01-11 05:33 38 ******************* 44 2023-01-11 06:32 38 ******************* 45 2023-01-11 07:31 39 ******************** 46 2023-01-11 08:30 38 ******************* 47 2023-01-11 09:29 38 ******************* 48 2023-01-11 10:28 ? - 49 2023-01-11 11:27 23 **** 50 2023-01-11 12:26 23 **** 51 2023-01-11 13:25 38 ******************* 52 2023-01-11 14:24 39 ******************** 53 2023-01-11 15:23 ? - 54 2023-01-11 16:22 34 *************** 55 2023-01-11 17:21 34 *************** 56 2023-01-11 18:20 38 ******************* 57 2023-01-11 19:19 38 ******************* 58 2023-01-11 20:18 39 ******************** 59 2023-01-11 21:17 ? - 60 2023-01-11 22:16 22 *** 61 2023-01-11 23:15 22 *** 62 2023-01-12 00:14 38 ******************* ... ..( 7 skipped). .. ******************* 70 2023-01-12 08:06 38 ******************* 71 2023-01-12 09:05 39 ******************** 72 2023-01-12 10:04 39 ******************** 73 2023-01-12 11:03 ? - 74 2023-01-12 12:02 23 **** 75 2023-01-12 13:01 23 **** 76 2023-01-12 14:00 38 ******************* 77 2023-01-12 14:59 38 ******************* 78 2023-01-12 15:58 39 ******************** 79 2023-01-12 16:57 38 ******************* 80 2023-01-12 17:56 39 ******************** 81 2023-01-12 18:55 ? - 82 2023-01-12 19:54 28 ********* 83 2023-01-12 20:53 28 ********* 84 2023-01-12 21:52 ? - 85 2023-01-12 22:51 23 **** 86 2023-01-12 23:50 ? - 87 2023-01-13 00:49 24 ***** 88 2023-01-13 01:48 24 ***** 89 2023-01-13 02:47 38 ******************* 90 2023-01-13 03:46 ? - 91 2023-01-13 04:45 26 ******* 92 2023-01-13 05:44 26 ******* 93 2023-01-13 06:43 ? - 94 2023-01-13 07:42 33 ************** 95 2023-01-13 08:41 ? - 96 2023-01-13 09:40 32 ************* 97 2023-01-13 10:39 ? - 98 2023-01-13 11:38 33 ************** 99 2023-01-13 12:37 33 ************** 100 2023-01-13 13:36 39 ******************** 101 2023-01-13 14:35 38 ******************* 102 2023-01-13 15:34 39 ******************** 103 2023-01-13 16:33 39 ******************** 104 2023-01-13 17:32 39 ******************** 105 2023-01-13 18:31 40 ********************* 106 2023-01-13 19:30 ? - 107 2023-01-13 20:29 23 **** 108 2023-01-13 21:28 23 **** 109 2023-01-13 22:27 36 ***************** 110 2023-01-13 23:26 37 ****************** 111 2023-01-14 00:25 38 ******************* 112 2023-01-14 01:24 39 ******************** 113 2023-01-14 02:23 ? - 114 2023-01-14 03:22 27 ******** 115 2023-01-14 04:21 27 ******** 116 2023-01-14 05:20 38 ******************* 117 2023-01-14 06:19 38 ******************* 118 2023-01-14 07:18 ? - 119 2023-01-14 08:17 26 ******* 120 2023-01-14 09:16 26 ******* 121 2023-01-14 10:15 38 ******************* 122 2023-01-14 11:14 ? - 123 2023-01-14 12:13 22 *** 124 2023-01-14 13:12 ? - 125 2023-01-14 14:11 22 *** 126 2023-01-14 15:10 22 *** 127 2023-01-14 16:09 37 ****************** 0 2023-01-14 17:08 38 ******************* 1 2023-01-14 18:07 38 ******************* 2 2023-01-14 19:06 38 ******************* 3 2023-01-14 20:05 ? - 4 2023-01-14 21:04 22 *** 5 2023-01-14 22:03 22 *** 6 2023-01-14 23:02 37 ****************** 7 2023-01-15 00:01 38 ******************* 8 2023-01-15 01:00 38 ******************* 9 2023-01-15 01:59 37 ****************** 10 2023-01-15 02:58 38 ******************* 11 2023-01-15 03:57 38 ******************* 12 2023-01-15 04:56 39 ******************** ... ..( 2 skipped). .. ******************** 15 2023-01-15 07:53 39 ******************** 16 2023-01-15 08:52 38 ******************* 17 2023-01-15 09:51 38 ******************* 18 2023-01-15 10:50 39 ******************** 19 2023-01-15 11:49 ? - 20 2023-01-15 12:48 22 *** 21 2023-01-15 13:47 22 *** 22 2023-01-15 14:46 40 ********************* 23 2023-01-15 15:45 37 ****************** 24 2023-01-15 16:44 ? - 25 2023-01-15 17:43 24 ***** 26 2023-01-15 18:42 24 ***** 27 2023-01-15 19:41 38 ******************* 28 2023-01-15 20:40 38 ******************* 29 2023-01-15 21:39 38 ******************* 30 2023-01-15 22:38 37 ****************** 31 2023-01-15 23:37 38 ******************* 32 2023-01-16 00:36 38 ******************* 33 2023-01-16 01:35 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST250DM000-1BD141 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: KC45 User Capacity: 250,059,350,016 bytes [250 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Jan 16 01:54:36 2023 +09 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 38) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 099 006 - 113937432 3 Spin_Up_Time PO---- 100 097 000 - 0 4 Start_Stop_Count -O--CK 094 094 020 - 6160 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 8920980635 9 Power_On_Hours -O--CK 082 082 000 - 16211 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5340 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 0 0 2 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 062 051 045 - 38 (Min/Max 24/38) 194 Temperature_Celsius -O---K 038 049 000 - 38 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 030 025 000 - 113937432 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 16246h+36m+10.932s 241 Total_LBAs_Written ------ 100 253 000 - 479521891 242 Total_LBAs_Read ------ 100 253 000 - 1744891926 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 16001 - # 2 Extended offline Completed without error 00% 15832 - # 3 Extended offline Completed without error 00% 15831 - # 4 Extended offline Interrupted (host reset) 00% 15461 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 24/38 Celsius Lifetime Min/Max Temperature: 10/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2023-01-10 20:42 39 ******************** 95 2023-01-10 21:41 ? - 96 2023-01-10 22:40 23 **** 97 2023-01-10 23:39 38 ******************* 98 2023-01-11 00:38 ? - 99 2023-01-11 01:37 28 ********* 100 2023-01-11 02:36 ? - 101 2023-01-11 03:35 24 ***** 102 2023-01-11 04:34 ? - 103 2023-01-11 05:33 32 ************* 104 2023-01-11 06:32 ? - 105 2023-01-11 07:31 33 ************** 106 2023-01-11 08:30 40 ********************* 107 2023-01-11 09:29 38 ******************* 108 2023-01-11 10:28 38 ******************* 109 2023-01-11 11:27 39 ******************** 110 2023-01-11 12:26 39 ******************** 111 2023-01-11 13:25 38 ******************* 112 2023-01-11 14:24 39 ******************** 113 2023-01-11 15:23 39 ******************** 114 2023-01-11 16:22 ? - 115 2023-01-11 17:21 23 **** 116 2023-01-11 18:20 38 ******************* 117 2023-01-11 19:19 39 ******************** 118 2023-01-11 20:18 39 ******************** 119 2023-01-11 21:17 39 ******************** 120 2023-01-11 22:16 38 ******************* 121 2023-01-11 23:15 ? - 122 2023-01-12 00:14 23 **** 123 2023-01-12 01:13 38 ******************* 124 2023-01-12 02:12 38 ******************* 125 2023-01-12 03:11 ? - 126 2023-01-12 04:10 33 ************** 127 2023-01-12 05:09 38 ******************* 0 2023-01-12 06:08 38 ******************* 1 2023-01-12 07:07 39 ******************** 2 2023-01-12 08:06 ? - 3 2023-01-12 09:05 23 **** 4 2023-01-12 10:04 38 ******************* ... ..( 2 skipped). .. ******************* 7 2023-01-12 13:01 38 ******************* 8 2023-01-12 14:00 39 ******************** 9 2023-01-12 14:59 38 ******************* 10 2023-01-12 15:58 39 ******************** ... ..( 3 skipped). .. ******************** 14 2023-01-12 19:54 39 ******************** 15 2023-01-12 20:53 ? - 16 2023-01-12 21:52 23 **** 17 2023-01-12 22:51 38 ******************* 18 2023-01-12 23:50 38 ******************* 19 2023-01-13 00:49 39 ******************** 20 2023-01-13 01:48 39 ******************** 21 2023-01-13 02:47 39 ******************** 22 2023-01-13 03:46 ? - 23 2023-01-13 04:45 28 ********* 24 2023-01-13 05:44 39 ******************** 25 2023-01-13 06:43 ? - 26 2023-01-13 07:42 24 ***** 27 2023-01-13 08:41 ? - 28 2023-01-13 09:40 24 ***** 29 2023-01-13 10:39 39 ******************** 30 2023-01-13 11:38 ? - 31 2023-01-13 12:37 26 ******* 32 2023-01-13 13:36 39 ******************** 33 2023-01-13 14:35 ? - 34 2023-01-13 15:34 32 ************* 35 2023-01-13 16:33 ? - 36 2023-01-13 17:32 32 ************* 37 2023-01-13 18:31 ? - 38 2023-01-13 19:30 32 ************* 39 2023-01-13 20:29 39 ******************** 40 2023-01-13 21:28 39 ******************** 41 2023-01-13 22:27 40 ********************* ... ..( 2 skipped). .. ********************* 44 2023-01-14 01:24 40 ********************* 45 2023-01-14 02:23 ? - 46 2023-01-14 03:22 24 ***** 47 2023-01-14 04:21 37 ****************** 48 2023-01-14 05:20 37 ****************** 49 2023-01-14 06:19 38 ******************* 50 2023-01-14 07:18 38 ******************* 51 2023-01-14 08:17 ? - 52 2023-01-14 09:16 27 ******** 53 2023-01-14 10:15 39 ******************** 54 2023-01-14 11:14 39 ******************** 55 2023-01-14 12:13 ? - 56 2023-01-14 13:12 26 ******* 57 2023-01-14 14:11 38 ******************* 58 2023-01-14 15:10 ? - 59 2023-01-14 16:09 23 **** 60 2023-01-14 17:08 ? - 61 2023-01-14 18:07 23 **** 62 2023-01-14 19:06 38 ******************* 63 2023-01-14 20:05 38 ******************* 64 2023-01-14 21:04 38 ******************* 65 2023-01-14 22:03 39 ******************** 66 2023-01-14 23:02 ? - 67 2023-01-15 00:01 22 *** 68 2023-01-15 01:00 37 ****************** 69 2023-01-15 01:59 38 ******************* ... ..( 3 skipped). .. ******************* 73 2023-01-15 05:55 38 ******************* 74 2023-01-15 06:54 39 ******************** ... ..( 5 skipped). .. ******************** 80 2023-01-15 12:48 39 ******************** 81 2023-01-15 13:47 ? - 82 2023-01-15 14:46 22 *** 83 2023-01-15 15:45 38 ******************* 84 2023-01-15 16:44 38 ******************* 85 2023-01-15 17:43 ? - 86 2023-01-15 18:42 24 ***** 87 2023-01-15 19:41 38 ******************* ... ..( 5 skipped). .. ******************* 93 2023-01-16 01:35 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD5000AAKS-22YGA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 12.01C02 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Mon Jan 16 01:54:36 2023 +09 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 176 174 021 - 6166 4 Start_Stop_Count -O--CK 093 093 000 - 7253 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 072 072 000 - 20462 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4656 192 Power-Off_Retract_Count -O--CK 200 200 000 - 470 193 Load_Cycle_Count -O--CK 198 198 000 - 7253 194 Temperature_Celsius -O---K 110 097 000 - 40 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 8 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 ac 60 11 12 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 c8 00 00 68 11 ac 17 12 60 00 00 00 00:00:26.832 NOP [Abort queued commands] 17 ac 60 11 12 00 c0 00 68 00 00 00 17 00:18:38.892 RECALIBRATE [RET-4] 00 b0 00 00 68 11 ac 17 12 60 00 00 00 00:00:26.808 NOP [Abort queued commands] Error 4 [3] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 3e 60 11 06 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 70 00 00 68 11 3e 17 06 60 00 00 00 00:00:26.744 NOP [Abort queued commands] 17 3e 60 11 06 00 68 00 68 00 00 00 17 00:18:35.710 RECALIBRATE [RET-4] 00 58 00 00 68 11 3e 17 06 60 00 00 00 00:00:26.720 NOP [Abort queued commands] Error 3 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 7b 60 10 d1 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 88 00 00 68 10 7b 17 d1 60 00 00 00 00:00:26.768 NOP [Abort queued commands] 17 7b 60 10 d1 00 80 00 68 00 00 00 17 00:18:22.203 RECALIBRATE [RET-4] 00 70 00 00 68 10 7b 17 d1 60 00 00 00 00:00:26.744 NOP [Abort queued commands] Error 2 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 93 60 10 b5 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 38 00 00 68 10 93 17 b5 60 00 00 00 00:00:26.688 NOP [Abort queued commands] 17 93 60 10 b5 00 30 00 68 00 00 00 17 00:18:15.059 RECALIBRATE [RET-4] 00 20 00 00 68 10 93 17 b5 60 00 00 00 00:00:26.664 NOP [Abort queued commands] Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 40 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 1d 60 10 ef 00 00 00 00 00 00 00 17 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 b0 00 00 68 10 1d 17 ef 60 00 00 00 00:00:26.808 NOP [Abort queued commands] 17 1d 60 10 ef 00 a8 00 68 00 00 00 17 00:18:29.789 RECALIBRATE [RET-4] 00 98 00 00 68 10 1d 17 ef 60 00 00 00 00:00:26.784 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 20249 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 27/40 Celsius Lifetime Min/Max Temperature: 23/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (20) Index Estimated Time Temperature Celsius 21 2023-01-15 23:47 40 ********************* ... ..(126 skipped). .. ********************* 20 2023-01-16 01:54 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 27283 Vendor specific /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.79-generic-1rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3250310AS Serial Number: -- Firmware Version: 3.AAA User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Mon Jan 16 01:54:37 2023 +09 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 92) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 089 006 - 224722776 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 090 090 020 - 10491 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 072 060 030 - 15788664 9 Power_On_Hours -O--CK 064 064 000 - 31691 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 091 091 020 - 9425 187 Reported_Uncorrect -O--CK 001 001 000 - 971 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 057 047 045 - 43 (Min/Max 27/44) 194 Temperature_Celsius -O---K 043 053 000 - 43 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 061 052 000 - 242865556 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967295 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967295 199 UDMA_CRC_Error_Count -OSRCK 200 173 000 - 498 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 1878 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1878 [17] occurred at disk power-on lifetime: 22753 hours (948 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 14 f4 75 98 75 e0 00 Error: UNC at LBA = 0x14f4759875 = 90000693365 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 14 f4 00 98 75 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 74 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 73 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 72 e0 00 01:02:32.128 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 71 e0 00 01:02:32.128 READ DMA EXT Error 1877 [16] occurred at disk power-on lifetime: 22753 hours (948 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 14 f4 75 98 75 e0 00 Error: UNC at LBA = 0x14f4759875 = 90000693365 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 14 f4 00 98 5f e0 00 01:02:28.590 READ DMA EXT 35 00 00 00 18 00 00 00 00 5e 3f e0 00 01:02:28.578 WRITE DMA EXT 35 00 00 00 48 00 00 cf 00 5f e7 e0 00 01:02:28.570 WRITE DMA EXT 35 00 00 00 08 00 14 f4 00 98 3f e0 00 01:02:28.568 WRITE DMA EXT 35 00 00 00 28 00 00 00 00 5e df e0 00 01:02:28.656 WRITE DMA EXT Error 1876 [15] occurred at disk power-on lifetime: 22755 hours (948 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 57 57 b2 57 e0 00 Error: UNC at LBA = 0x1c5757b257 = 121724449367 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 1c 57 00 b2 57 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 56 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 55 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 54 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 53 e0 00 00:35:05.118 READ DMA EXT Error 1875 [14] occurred at disk power-on lifetime: 22755 hours (948 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 57 57 b2 57 e0 00 Error: UNC at LBA = 0x1c5757b257 = 121724449367 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 1c 57 00 b2 3f e0 00 00:35:01.327 READ DMA EXT 25 00 00 00 08 00 08 11 00 f6 37 e0 00 00:35:01.326 READ DMA EXT 35 00 00 00 10 00 03 f0 00 a4 af e0 00 00:35:01.325 WRITE DMA EXT 35 00 00 00 10 00 0f 6a 00 70 6f e0 00 00:35:01.325 WRITE DMA EXT 35 00 00 00 10 00 0f 6a 00 70 6f e0 00 00:35:01.324 WRITE DMA EXT Error 1874 [13] occurred at disk power-on lifetime: 22753 hours (948 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 14 f4 75 98 75 e0 00 Error: UNC at LBA = 0x14f4759875 = 90000693365 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 14 f4 00 98 75 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 74 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 73 e0 00 01:02:32.143 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 72 e0 00 01:02:32.128 READ DMA EXT 25 00 00 00 01 00 14 f4 00 98 71 e0 00 01:02:32.128 READ DMA EXT Error 1873 [12] occurred at disk power-on lifetime: 22753 hours (948 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 14 f4 75 98 75 e0 00 Error: UNC at LBA = 0x14f4759875 = 90000693365 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 14 f4 00 98 5f e0 00 01:02:28.590 READ DMA EXT 35 00 00 00 18 00 00 00 00 5e 3f e0 00 01:02:28.578 WRITE DMA EXT 35 00 00 00 48 00 00 cf 00 5f e7 e0 00 01:02:28.570 WRITE DMA EXT 35 00 00 00 08 00 14 f4 00 98 3f e0 00 01:02:28.568 WRITE DMA EXT 35 00 00 00 28 00 00 00 00 5e df e0 00 01:02:28.656 WRITE DMA EXT Error 1872 [11] occurred at disk power-on lifetime: 22755 hours (948 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 57 57 b2 57 e0 00 Error: UNC at LBA = 0x1c5757b257 = 121724449367 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 1c 57 00 b2 57 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 56 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 55 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 54 e0 00 00:35:05.118 READ DMA EXT 25 00 00 00 01 00 1c 57 00 b2 53 e0 00 00:35:05.118 READ DMA EXT Error 1871 [10] occurred at disk power-on lifetime: 22755 hours (948 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 1c 57 57 b2 57 e0 00 Error: UNC at LBA = 0x1c5757b257 = 121724449367 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 1c 57 00 b2 3f e0 00 00:35:01.327 READ DMA EXT 25 00 00 00 08 00 08 11 00 f6 37 e0 00 00:35:01.326 READ DMA EXT 35 00 00 00 10 00 03 f0 00 a4 af e0 00 00:35:01.325 WRITE DMA EXT 35 00 00 00 10 00 0f 6a 00 70 6f e0 00 00:35:01.325 WRITE DMA EXT 35 00 00 00 10 00 0f 6a 00 70 6f e0 00 00:35:01.324 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 31594 - # 2 Extended offline Aborted by host 40% 31592 - # 3 Extended offline Aborted by host 80% 31188 - # 4 Short offline Completed without error 00% 19 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x8002 2 0 Vendor specific 0x8003 2 0 Vendor specific 0x8004 2 0 Vendor specific


Hardware for Linux and BSD

GitHub