/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.17-301.fc35.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 17 04:23:31 2021 +06 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (12420) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 207) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 3143 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 093 091 025 - 2326 4 Start_Stop_Count -O--CK 096 096 000 - 4454 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 7036 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 67 12 Power_Cycle_Count -O--CK 096 096 000 - 4474 191 G-Sense_Error_Rate -O---K 100 100 000 - 3947 192 Power-Off_Retract_Count -O---K 100 100 000 - 94 194 Temperature_Celsius -O---- 058 055 000 - 42 (Min/Max 6/45) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 22 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 49558 223 Load_Retry_Count -O--CK 100 100 000 - 67 225 Load_Cycle_Count -O--CK 077 077 000 - 234990 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 3059 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3059 [2] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a df 40 00 Error: UNC at LBA = 0x175b0adf = 391842527 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 17 5b 0a df 40 00 00:00:00.626 READ FPDMA QUEUED 60 00 00 00 08 00 00 26 7d b1 b0 40 00 00:00:00.630 READ FPDMA QUEUED 60 00 00 00 d8 00 00 00 85 f9 28 40 00 00:00:00.630 READ FPDMA QUEUED 61 00 00 00 10 00 00 00 bc 96 c8 40 00 00:00:00.630 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 6c a0 d2 40 00 00:00:00.630 READ FPDMA QUEUED Error 3058 [1] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a de 40 00 Error: UNC at LBA = 0x175b0ade = 391842526 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 17 5b 0a de 40 00 00:00:00.562 READ FPDMA QUEUED 61 00 00 00 40 00 00 1d 8d 21 c0 40 00 00:00:00.626 WRITE FPDMA QUEUED 61 00 00 00 40 00 00 1d 8d 21 80 40 00 00:00:00.626 WRITE FPDMA QUEUED 61 00 00 00 40 00 00 1d 8d 21 40 40 00 00:00:00.626 WRITE FPDMA QUEUED 61 00 00 00 40 00 00 1d 87 bd 40 40 00 00:00:00.626 WRITE FPDMA QUEUED Error 3057 [0] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dd 40 00 Error: UNC at LBA = 0x175b0add = 391842525 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.442 READ FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.623 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 ae 04 92 40 00 00:00:00.623 READ FPDMA QUEUED 60 00 00 00 08 00 00 05 5c a7 d0 40 00 00:00:00.623 READ FPDMA QUEUED 60 00 00 00 10 00 00 2a e7 10 60 40 00 00:00:00.623 READ FPDMA QUEUED Error 3056 [7] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dd 40 00 Error: UNC at LBA = 0x175b0add = 391842525 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 26 9c 7e 50 40 00 00:00:00.565 READ FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.442 READ FPDMA QUEUED 61 00 00 00 20 00 00 00 ba c2 38 40 00 00:00:00.563 WRITE FPDMA QUEUED 60 00 00 00 08 00 00 26 83 51 a8 40 00 00:00:00.563 READ FPDMA QUEUED 60 00 00 00 08 00 00 26 b0 91 c0 40 00 00:00:00.562 READ FPDMA QUEUED Error 3055 [6] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dd 40 00 Error: WP at LBA = 0x175b0add = 391842525 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 00 40 00 00 02 bc f3 a0 40 00 00:00:00.505 WRITE FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.382 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 85 ef 28 40 00 00:00:00.502 READ FPDMA QUEUED 60 00 00 00 40 00 00 1d 87 ba 40 40 00 00:00:00.502 READ FPDMA QUEUED 61 00 00 00 08 00 00 00 66 e3 88 40 00 00:00:00.502 WRITE FPDMA QUEUED Error 3054 [5] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dd 40 00 Error: UNC at LBA = 0x175b0add = 391842525 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 40 00 00 0b 40 36 80 40 00 00:00:00.445 READ FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.382 READ FPDMA QUEUED 61 00 00 00 20 00 00 00 ba c1 b8 40 00 00:00:00.442 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 66 e0 e0 40 00 00:00:00.442 WRITE FPDMA QUEUED 61 00 00 00 20 00 00 00 ba c1 98 40 00 00:00:00.442 WRITE FPDMA QUEUED Error 3053 [4] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dd 40 00 Error: UNC at LBA = 0x175b0add = 391842525 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 00 85 ef 28 40 00 00:00:00.385 READ FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dd 40 00 00:00:00.317 READ FPDMA QUEUED 61 00 00 00 20 00 00 00 ba c0 78 40 00 00:00:00.382 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 00 7b 0e f2 40 00 00:00:00.382 READ FPDMA QUEUED 60 00 00 00 40 00 00 00 6b e1 4a 40 00 00:00:00.382 READ FPDMA QUEUED Error 3052 [3] occurred at disk power-on lifetime: 6923 hours (288 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 01 00 00 17 5b 0a dc 40 00 Error: UNC at LBA = 0x175b0adc = 391842524 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 01 00 00 17 5b 0a dc 40 00 00:00:00.317 READ FPDMA QUEUED 60 00 00 00 01 00 00 17 5b 0a dc 40 00 00:00:00.378 READ FPDMA QUEUED 60 00 00 00 06 00 00 05 d4 cd e0 40 00 00:00:00.378 READ FPDMA QUEUED 61 00 00 00 20 00 00 00 ba bf 38 40 00 00:00:00.378 WRITE FPDMA QUEUED 60 00 00 00 40 00 00 1a a6 d9 f8 40 00 00:00:00.378 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed: read failure 90% 6857 11225936 # 2 Short offline Completed: read failure 90% 6857 11225936 # 3 Vendor (0x50) Completed: read failure 90% 6685 11225936 # 4 Short offline Completed: read failure 90% 6685 11225936 # 5 Vendor (0x50) Completed: read failure 90% 6474 11225936 # 6 Short offline Completed: read failure 90% 6474 11225936 # 7 Vendor (0x50) Completed: read failure 90% 6348 11225936 # 8 Short offline Completed: read failure 80% 6348 11225936 # 9 Vendor (0x50) Completed: read failure 90% 6140 11225936 #10 Short offline Completed: read failure 80% 6140 11225936 #11 Vendor (0x50) Completed: read failure 90% 4592 11225936 #12 Short offline Completed: read failure 90% 4592 11225936 #13 Vendor (0x50) Completed: read failure 90% 4167 11225936 #14 Short offline Completed: read failure 90% 4167 11225936 #15 Vendor (0x50) Completed: read failure 90% 3739 11225936 #16 Short offline Completed: read failure 90% 3739 11225936 #17 Vendor (0x50) Completed: read failure 90% 3589 11225936 #18 Short offline Completed: read failure 90% 3589 11225936 #19 Vendor (0x50) Completed: read failure 90% 2905 11225936 #20 Short offline Completed: read failure 90% 2905 11225936 SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed_read_failure [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 42/42 Celsius Lifetime Min/Max Temperature: 6/45 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (37) Index Estimated Time Temperature Celsius 38 2021-11-16 17:45 42 *********************** 39 2021-11-16 17:50 34 *************** 40 2021-11-16 17:55 34 *************** 41 2021-11-16 18:00 35 **************** 42 2021-11-16 18:05 35 **************** 43 2021-11-16 18:10 36 ***************** ... ..( 2 skipped). .. ***************** 46 2021-11-16 18:25 36 ***************** 47 2021-11-16 18:30 37 ****************** 48 2021-11-16 18:35 31 ************ 49 2021-11-16 18:40 33 ************** 50 2021-11-16 18:45 33 ************** 51 2021-11-16 18:50 34 *************** 52 2021-11-16 18:55 35 **************** 53 2021-11-16 19:00 35 **************** 54 2021-11-16 19:05 35 **************** 55 2021-11-16 19:10 36 ***************** ... ..( 3 skipped). .. ***************** 59 2021-11-16 19:30 36 ***************** 60 2021-11-16 19:35 37 ****************** 61 2021-11-16 19:40 37 ****************** 62 2021-11-16 19:45 37 ****************** 63 2021-11-16 19:50 38 ******************* 64 2021-11-16 19:55 31 ************ 65 2021-11-16 20:00 32 ************* 66 2021-11-16 20:05 34 *************** 67 2021-11-16 20:10 34 *************** 68 2021-11-16 20:15 34 *************** 69 2021-11-16 20:20 35 **************** ... ..( 2 skipped). .. **************** 72 2021-11-16 20:35 35 **************** 73 2021-11-16 20:40 36 ***************** ... ..( 6 skipped). .. ***************** 80 2021-11-16 21:15 36 ***************** 81 2021-11-16 21:20 31 ************ 82 2021-11-16 21:25 33 ************** 83 2021-11-16 21:30 35 **************** 84 2021-11-16 21:35 36 ***************** 85 2021-11-16 21:40 36 ***************** 86 2021-11-16 21:45 36 ***************** 87 2021-11-16 21:50 37 ****************** ... ..( 2 skipped). .. ****************** 90 2021-11-16 22:05 37 ****************** 91 2021-11-16 22:10 38 ******************* ... ..( 2 skipped). .. ******************* 94 2021-11-16 22:25 38 ******************* 95 2021-11-16 22:30 39 ******************** ... ..( 3 skipped). .. ******************** 99 2021-11-16 22:50 39 ******************** 100 2021-11-16 22:55 40 ********************* ... ..( 12 skipped). .. ********************* 113 2021-11-17 00:00 40 ********************* 114 2021-11-17 00:05 39 ******************** ... ..( 2 skipped). .. ******************** 117 2021-11-17 00:20 39 ******************** 118 2021-11-17 00:25 38 ******************* ... ..( 2 skipped). .. ******************* 121 2021-11-17 00:40 38 ******************* 122 2021-11-17 00:45 31 ************ 123 2021-11-17 00:50 32 ************* 124 2021-11-17 00:55 33 ************** 125 2021-11-17 01:00 37 ****************** 126 2021-11-17 01:05 38 ******************* 127 2021-11-17 01:10 39 ******************** 0 2021-11-17 01:15 39 ******************** 1 2021-11-17 01:20 38 ******************* 2 2021-11-17 01:25 38 ******************* 3 2021-11-17 01:30 37 ****************** 4 2021-11-17 01:35 39 ******************** 5 2021-11-17 01:40 39 ******************** 6 2021-11-17 01:45 39 ******************** 7 2021-11-17 01:50 40 ********************* 8 2021-11-17 01:55 42 *********************** ... ..( 3 skipped). .. *********************** 12 2021-11-17 02:15 42 *********************** 13 2021-11-17 02:20 41 ********************** 14 2021-11-17 02:25 40 ********************* 15 2021-11-17 02:30 40 ********************* 16 2021-11-17 02:35 39 ******************** 17 2021-11-17 02:40 39 ******************** 18 2021-11-17 02:45 41 ********************** 19 2021-11-17 02:50 41 ********************** 20 2021-11-17 02:55 42 *********************** 21 2021-11-17 03:00 43 ************************ 22 2021-11-17 03:05 42 *********************** ... ..( 4 skipped). .. *********************** 27 2021-11-17 03:30 42 *********************** 28 2021-11-17 03:35 41 ********************** 29 2021-11-17 03:40 42 *********************** ... ..( 5 skipped). .. *********************** 35 2021-11-17 04:10 42 *********************** 36 2021-11-17 04:15 43 ************************ 37 2021-11-17 04:20 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific