/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-21-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE4 Device Model: WDC WD5003ABYX-18WERA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Add. Product Id: DELL(tm) Firmware Version: 01.01S02 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun Jan 29 13:49:39 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 86) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 46 3 Spin_Up_Time POS--K 142 142 021 - 3858 4 Start_Stop_Count -O--CK 100 100 000 - 33 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 049 049 000 - 37355 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 32 192 Power-Off_Retract_Count -O--CK 200 200 000 - 31 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 103 103 000 - 40 (Min/Max 20/40) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 20/40 Celsius Lifetime Min/Max Temperature: 20/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (351) Index Estimated Time Temperature Celsius 352 2023-01-29 05:52 33 ************** ... ..( 62 skipped). .. ************** 415 2023-01-29 06:55 33 ************** 416 2023-01-29 06:56 ? - 417 2023-01-29 06:57 20 * 418 2023-01-29 06:58 20 * 419 2023-01-29 06:59 21 ** 420 2023-01-29 07:00 22 *** 421 2023-01-29 07:01 24 ***** 422 2023-01-29 07:02 25 ****** 423 2023-01-29 07:03 25 ****** 424 2023-01-29 07:04 25 ****** 425 2023-01-29 07:05 26 ******* 426 2023-01-29 07:06 26 ******* 427 2023-01-29 07:07 27 ******** 428 2023-01-29 07:08 27 ******** 429 2023-01-29 07:09 28 ********* 430 2023-01-29 07:10 29 ********** ... ..( 2 skipped). .. ********** 433 2023-01-29 07:13 29 ********** 434 2023-01-29 07:14 30 *********** 435 2023-01-29 07:15 31 ************ 436 2023-01-29 07:16 32 ************* 437 2023-01-29 07:17 32 ************* 438 2023-01-29 07:18 32 ************* 439 2023-01-29 07:19 33 ************** 440 2023-01-29 07:20 33 ************** 441 2023-01-29 07:21 33 ************** 442 2023-01-29 07:22 34 *************** 443 2023-01-29 07:23 34 *************** 444 2023-01-29 07:24 34 *************** 445 2023-01-29 07:25 35 **************** ... ..( 6 skipped). .. **************** 452 2023-01-29 07:32 35 **************** 453 2023-01-29 07:33 36 ***************** 454 2023-01-29 07:34 36 ***************** 455 2023-01-29 07:35 36 ***************** 456 2023-01-29 07:36 37 ****************** 457 2023-01-29 07:37 37 ****************** 458 2023-01-29 07:38 37 ****************** 459 2023-01-29 07:39 38 ******************* ... ..( 2 skipped). .. ******************* 462 2023-01-29 07:42 38 ******************* 463 2023-01-29 07:43 39 ******************** ... ..( 35 skipped). .. ******************** 21 2023-01-29 08:19 39 ******************** 22 2023-01-29 08:20 40 ********************* ... ..( 82 skipped). .. ********************* 105 2023-01-29 09:43 40 ********************* 106 2023-01-29 09:44 35 **************** ... ..( 22 skipped). .. **************** 129 2023-01-29 10:07 35 **************** 130 2023-01-29 10:08 34 *************** ... ..(114 skipped). .. *************** 245 2023-01-29 12:03 34 *************** 246 2023-01-29 12:04 35 **************** ... ..( 31 skipped). .. **************** 278 2023-01-29 12:36 35 **************** 279 2023-01-29 12:37 34 *************** ... ..( 54 skipped). .. *************** 334 2023-01-29 13:32 34 *************** 335 2023-01-29 13:33 33 ************** ... ..( 15 skipped). .. ************** 351 2023-01-29 13:49 33 ************** SCT Error Recovery Control: Read: 80 (8.0 seconds) Write: 80 (8.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 10271 Vendor specific