/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Lexar SSD NM790 4TB Serial Number: -- Firmware Version: 12237 PCI Vendor/Subsystem ID: 0x1d97 IEEE OUI Identifier: 0xcaf25b Total NVM Capacity: 4,096,805,658,624 [4.09 TB] Unallocated NVM Capacity: 0 Controller ID: 0 NVMe Version: 2.0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 4,096,805,658,624 [4.09 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: caf25b ... Local Time is: Fri Jan 5 07:52:50 2024 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0a): Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 90 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.50W - - 0 0 0 0 0 0 1 + 5.80W - - 1 1 1 1 0 0 2 + 3.60W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 5000 10000 4 - 0.0025W - - 4 4 4 4 8000 41000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 44 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 7,572,696 [3.87 TB] Data Units Written: 3,468,229 [1.77 TB] Host Read Commands: 36,802,383 Host Write Commands: 14,760,056 Controller Busy Time: 22 Power Cycles: 31 Power On Hours: 3,053 Unsafe Shutdowns: 24 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 44 Celsius Temperature Sensor 2: 37 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x2002) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: XPG GAMMIX S11 Pro Serial Number: -- Firmware Version: 42B4S9NA PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x000000 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,048,408,248,320 [2.04 TB] Namespace 1 Utilization: 1,407,105,802,240 [1.40 TB] Namespace 1 Formatted LBA Size: 512 Local Time is: Fri Jan 5 07:52:50 2024 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 15000 15000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 38 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 16,836,025 [8.62 TB] Data Units Written: 24,058,220 [12.3 TB] Host Read Commands: 86,483,697 Host Write Commands: 104,939,489 Controller Busy Time: 1,764 Power Cycles: 496 Power On Hours: 23,436 Unsafe Shutdowns: 397 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 4 Thermal Temp. 1 Total Time: 8 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 QVO 4TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVQ01B6Q User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 5 07:52:50 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 320) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 095 095 000 - 21260 12 Power_Cycle_Count -O--CK 099 099 000 - 390 177 Wear_Leveling_Count PO--C- 099 099 000 - 10 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 045 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 324 241 Total_LBAs_Written -O--CK 099 099 000 - 47885843739 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 26/37 Celsius Lifetime Min/Max Temperature: 16/55 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (5) Index Estimated Time Temperature Celsius 6 2024-01-04 10:40 27 ******** 7 2024-01-04 10:50 28 ********* ... ..( 7 skipped). .. ********* 15 2024-01-04 12:10 28 ********* 16 2024-01-04 12:20 29 ********** 17 2024-01-04 12:30 28 ********* ... ..( 10 skipped). .. ********* 28 2024-01-04 14:20 28 ********* 29 2024-01-04 14:30 29 ********** 30 2024-01-04 14:40 29 ********** 31 2024-01-04 14:50 29 ********** 32 2024-01-04 15:00 28 ********* 33 2024-01-04 15:10 29 ********** 34 2024-01-04 15:20 29 ********** 35 2024-01-04 15:30 28 ********* ... ..( 6 skipped). .. ********* 42 2024-01-04 16:40 28 ********* 43 2024-01-04 16:50 27 ******** 44 2024-01-04 17:00 27 ******** 45 2024-01-04 17:10 28 ********* ... ..( 10 skipped). .. ********* 56 2024-01-04 19:00 28 ********* 57 2024-01-04 19:10 29 ********** 58 2024-01-04 19:20 27 ******** 59 2024-01-04 19:30 28 ********* ... ..( 8 skipped). .. ********* 68 2024-01-04 21:00 28 ********* 69 2024-01-04 21:10 27 ******** 70 2024-01-04 21:20 27 ******** 71 2024-01-04 21:30 27 ******** 72 2024-01-04 21:40 28 ********* 73 2024-01-04 21:50 28 ********* 74 2024-01-04 22:00 28 ********* 75 2024-01-04 22:10 27 ******** 76 2024-01-04 22:20 27 ******** 77 2024-01-04 22:30 32 ************* 78 2024-01-04 22:40 27 ******** ... ..( 3 skipped). .. ******** 82 2024-01-04 23:20 27 ******** 83 2024-01-04 23:30 29 ********** 84 2024-01-04 23:40 27 ******** ... ..( 4 skipped). .. ******** 89 2024-01-05 00:30 27 ******** 90 2024-01-05 00:40 32 ************* 91 2024-01-05 00:50 28 ********* 92 2024-01-05 01:00 32 ************* 93 2024-01-05 01:10 29 ********** 94 2024-01-05 01:20 30 *********** 95 2024-01-05 01:30 28 ********* 96 2024-01-05 01:40 28 ********* 97 2024-01-05 01:50 28 ********* 98 2024-01-05 02:00 27 ******** 99 2024-01-05 02:10 31 ************ 100 2024-01-05 02:20 28 ********* ... ..( 2 skipped). .. ********* 103 2024-01-05 02:50 28 ********* 104 2024-01-05 03:00 27 ******** ... ..( 4 skipped). .. ******** 109 2024-01-05 03:50 27 ******** 110 2024-01-05 04:00 28 ********* ... ..( 3 skipped). .. ********* 114 2024-01-05 04:40 28 ********* 115 2024-01-05 04:50 27 ******** 116 2024-01-05 05:00 27 ******** 117 2024-01-05 05:10 27 ******** 118 2024-01-05 05:20 28 ********* 119 2024-01-05 05:30 27 ******** ... ..( 4 skipped). .. ******** 124 2024-01-05 06:20 27 ******** 125 2024-01-05 06:30 28 ********* ... ..( 4 skipped). .. ********* 2 2024-01-05 07:20 28 ********* 3 2024-01-05 07:30 29 ********** 4 2024-01-05 07:40 28 ********* 5 2024-01-05 07:50 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 390 --- Lifetime Power-On Resets 0x01 0x010 4 21260 --- Power-on Hours 0x01 0x018 6 47885843739 --- Logical Sectors Written 0x01 0x020 6 49606437 --- Number of Write Commands 0x01 0x028 6 53360285509 --- Logical Sectors Read 0x01 0x030 6 129086220 --- Number of Read Commands 0x01 0x038 6 65000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x020 1 55 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3937 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M9T Device Model: ST2000LM003 HN-M201RAD Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BC10009 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 5 07:52:50 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22560) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 376) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 463 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 085 025 - 4249 4 Start_Stop_Count -O--CK 097 097 000 - 3209 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 50277 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1009 191 G-Sense_Error_Rate -O---K 100 100 000 - 2272 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 062 038 000 - 38 (Min/Max 6/62) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 1 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 142 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 2274 223 Load_Retry_Count -O--CK 100 100 000 - 193 225 Load_Cycle_Count -O--CK 041 041 000 - 605415 241 Total_LBAs_Written -O--CK 094 088 000 - 9058599 242 Total_LBAs_Read -O--CK 097 088 000 - 5061008 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 147 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 147 [2] occurred at disk power-on lifetime: 38829 hours (1617 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 a1 e8 0f 87 40 00 Error: UNC at LBA = 0xa1e80f87 = 2716340103 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a1 e8 0f 87 40 08 00:03:04.834 READ FPDMA QUEUED 61 00 00 00 30 00 00 0e 45 26 1f 40 08 00:03:04.839 WRITE FPDMA QUEUED 60 00 10 00 08 00 00 44 c2 22 6f 40 08 00:03:04.839 READ FPDMA QUEUED 60 00 00 00 08 00 00 a1 e8 0f 87 40 08 00:03:04.839 READ FPDMA QUEUED 60 00 00 00 08 00 00 01 c7 8a 97 40 08 00:03:04.839 READ FPDMA QUEUED Error 146 [1] occurred at disk power-on lifetime: 38829 hours (1617 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 a1 e8 0f 87 40 00 Error: UNC at LBA = 0xa1e80f87 = 2716340103 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 a1 e8 0f 87 40 08 00:03:04.834 READ FPDMA QUEUED 60 00 00 00 08 00 00 01 c7 8a 97 40 08 00:03:04.836 READ FPDMA QUEUED 60 00 00 04 08 00 00 56 d6 08 b7 40 08 00:03:04.836 READ FPDMA QUEUED 60 00 00 00 08 00 00 a1 e8 0f 87 40 08 00:03:04.836 READ FPDMA QUEUED 60 00 00 00 08 00 00 44 c2 1d 17 40 08 00:03:04.836 READ FPDMA QUEUED Error 145 [0] occurred at disk power-on lifetime: 38829 hours (1617 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 04 cf 00 00 a1 e8 0f 80 40 00 Error: UNC at LBA = 0xa1e80f80 = 2716340096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 07 08 00 00 a1 e8 0d 47 40 08 00:03:04.753 READ FPDMA QUEUED 61 00 00 00 08 00 00 45 05 14 27 40 08 00:03:04.816 WRITE FPDMA QUEUED 60 00 10 00 08 00 00 53 81 92 2f 40 08 00:03:04.816 READ FPDMA QUEUED 61 00 00 00 08 00 00 03 0a e6 8f 40 08 00:03:04.816 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 a2 04 48 4f 40 08 00:03:04.816 WRITE FPDMA QUEUED Error 144 [7] occurred at disk power-on lifetime: 38829 hours (1617 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 04 cf 00 00 a1 e8 0f 80 40 00 Error: WP at LBA = 0xa1e80f80 = 2716340096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 18 00 00 a2 4b 7a 4f 40 08 00:03:04.788 WRITE FPDMA QUEUED 60 00 00 07 08 00 00 a1 e8 0d 47 40 08 00:03:04.753 READ FPDMA QUEUED 61 00 00 00 08 00 00 0e ea 30 17 40 08 00:03:04.785 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 0e ea 2e ef 40 08 00:03:04.785 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 0e ea 2d bf 40 08 00:03:04.785 WRITE FPDMA QUEUED Error 143 [6] occurred at disk power-on lifetime: 38829 hours (1617 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 04 cf 00 00 a1 e8 0f 80 40 00 Error: UNC at LBA = 0xa1e80f80 = 2716340096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 50 a2 2a 37 40 08 00:03:04.757 READ FPDMA QUEUED 60 00 00 08 38 00 00 a1 e8 0c 17 40 08 00:03:04.753 READ FPDMA QUEUED 60 00 00 02 e8 00 00 53 81 92 2f 40 08 00:03:04.754 READ FPDMA QUEUED 61 00 00 00 08 00 00 03 0a e6 8f 40 08 00:03:04.754 WRITE FPDMA QUEUED 60 00 00 08 38 00 00 a1 e8 0c 17 40 08 00:03:04.754 READ FPDMA QUEUED Error 142 [5] occurred at disk power-on lifetime: 16839 hours (701 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 04 71 00 00 c1 a7 1f 46 40 00 Error: ICRC, ABRT at LBA = 0xc1a71f46 = 3248955206 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 06 70 00 00 c1 a7 1f 47 40 08 00:17:13.561 WRITE FPDMA QUEUED 61 00 00 05 48 00 00 c1 a7 5d af 40 08 00:17:13.564 WRITE FPDMA QUEUED 61 00 00 08 78 00 00 c1 a7 4d 3f 40 08 00:17:13.564 WRITE FPDMA QUEUED 61 00 00 05 40 00 00 c1 a7 47 ff 40 08 00:17:13.564 WRITE FPDMA QUEUED 61 00 00 02 50 00 00 c1 a7 45 af 40 08 00:17:13.564 WRITE FPDMA QUEUED Error 141 [4] occurred at disk power-on lifetime: 16839 hours (701 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 fe e9 00 00 c1 71 d0 ae 40 00 Error: ICRC, ABRT at LBA = 0xc171d0ae = 3245461678 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 02 18 00 00 c1 71 d0 af 40 08 00:17:13.523 WRITE FPDMA QUEUED 61 00 00 02 c0 00 00 c1 71 d2 c7 40 08 00:17:13.525 WRITE FPDMA QUEUED 61 00 00 00 70 00 00 25 99 65 6f 40 08 00:17:13.525 WRITE FPDMA QUEUED 61 00 00 05 48 00 00 c1 71 cd 7f 40 08 00:17:13.525 WRITE FPDMA QUEUED 61 00 00 02 c8 00 00 c1 20 c2 8f 40 08 00:17:13.525 WRITE FPDMA QUEUED Error 140 [3] occurred at disk power-on lifetime: 16839 hours (701 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 07 a9 00 00 c0 a8 35 7e 40 00 Error: ICRC, ABRT at LBA = 0xc0a8357e = 3232249214 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 07 d8 00 00 c0 a8 35 7f 40 08 00:17:13.458 WRITE FPDMA QUEUED 61 00 00 08 b8 00 00 c0 a8 47 ff 40 08 00:17:13.462 WRITE FPDMA QUEUED 61 00 00 02 b0 00 00 c0 a8 45 4f 40 08 00:17:13.462 WRITE FPDMA QUEUED 61 00 00 08 08 00 00 c0 a8 35 4f 40 08 00:17:13.462 WRITE FPDMA QUEUED 61 00 00 00 c8 00 00 c0 a7 f4 8f 40 08 00:17:13.462 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 32/42 Celsius Lifetime Min/Max Temperature: 5/62 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (55) Index Estimated Time Temperature Celsius 56 2024-01-04 21:15 38 ******************* 57 2024-01-04 21:20 34 *************** ... ..( 5 skipped). .. *************** 63 2024-01-04 21:50 34 *************** 64 2024-01-04 21:55 35 **************** ... ..( 5 skipped). .. **************** 70 2024-01-04 22:25 35 **************** 71 2024-01-04 22:30 34 *************** ... ..( 8 skipped). .. *************** 80 2024-01-04 23:15 34 *************** 81 2024-01-04 23:20 35 **************** 82 2024-01-04 23:25 34 *************** ... ..( 6 skipped). .. *************** 89 2024-01-05 00:00 34 *************** 90 2024-01-05 00:05 35 **************** ... ..( 3 skipped). .. **************** 94 2024-01-05 00:25 35 **************** 95 2024-01-05 00:30 36 ***************** 96 2024-01-05 00:35 36 ***************** 97 2024-01-05 00:40 36 ***************** 98 2024-01-05 00:45 38 ******************* 99 2024-01-05 00:50 37 ****************** ... ..( 3 skipped). .. ****************** 103 2024-01-05 01:10 37 ****************** 104 2024-01-05 01:15 36 ***************** 105 2024-01-05 01:20 36 ***************** 106 2024-01-05 01:25 37 ****************** 107 2024-01-05 01:30 37 ****************** 108 2024-01-05 01:35 37 ****************** 109 2024-01-05 01:40 36 ***************** ... ..( 4 skipped). .. ***************** 114 2024-01-05 02:05 36 ***************** 115 2024-01-05 02:10 35 **************** ... ..( 48 skipped). .. **************** 36 2024-01-05 06:15 35 **************** 37 2024-01-05 06:20 37 ****************** ... ..( 3 skipped). .. ****************** 41 2024-01-05 06:40 37 ****************** 42 2024-01-05 06:45 38 ******************* ... ..( 2 skipped). .. ******************* 45 2024-01-05 07:00 38 ******************* 46 2024-01-05 07:05 37 ****************** 47 2024-01-05 07:10 37 ****************** 48 2024-01-05 07:15 37 ****************** 49 2024-01-05 07:20 38 ******************* 50 2024-01-05 07:25 38 ******************* 51 2024-01-05 07:30 39 ******************** 52 2024-01-05 07:35 39 ******************** 53 2024-01-05 07:40 38 ******************* 54 2024-01-05 07:45 38 ******************* 55 2024-01-05 07:50 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdc smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST8000VN004-2M2101 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SC60 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 5 07:52:50 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 559) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 716) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 077 064 044 - 49241352 3 Spin_Up_Time PO---- 084 081 000 - 0 4 Start_Stop_Count -O--CK 083 083 020 - 18082 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 081 060 045 - 135411356 9 Power_On_Hours -O--CK 077 077 000 - 20157 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 380 18 Head_Health PO-R-- 100 100 050 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 097 000 - 25770197000 190 Airflow_Temperature_Cel -O---K 059 043 040 - 41 (Min/Max 38/44) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 198 193 Load_Cycle_Count -O--CK 016 016 000 - 169691 194 Temperature_Celsius -O---K 041 057 000 - 41 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 077 064 000 - 49241352 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 1511h+41m+30.660s 241 Total_LBAs_Written ------ 100 253 000 - 80475578552 242 Total_LBAs_Read ------ 100 253 000 - 65344997149 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 768 Current Device Internal Status Data log 0x2f GPL R/O 1 Set Sector Configuration 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 16320 Device vendor specific log 0xa4 GPL,SL VS 160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb6 GPL VS 1920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 8 Device vendor specific log 0xc3 GPL,SL VS 32 Device vendor specific log 0xc9 GPL,SL VS 8 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xcd GPL,SL VS 8 Device vendor specific log 0xd1 GPL VS 336 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 38/44 Celsius Lifetime Min/Max Temperature: 16/57 Celsius Under/Over Temperature Limit Count: 0/89 SMART Status: 0xc24f (PASSED) Vendor specific: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 10/25 Celsius Min/Max Temperature Limit: 5/70 Celsius Temperature History Size (Index): 128 (46) Index Estimated Time Temperature Celsius 47 2023-12-31 02:28 40 ********************* ... ..( 10 skipped). .. ********************* 58 2023-12-31 13:17 40 ********************* 59 2023-12-31 14:16 39 ******************** 60 2023-12-31 15:15 40 ********************* ... ..( 4 skipped). .. ********************* 65 2023-12-31 20:10 40 ********************* 66 2023-12-31 21:09 41 ********************** 67 2023-12-31 22:08 41 ********************** 68 2023-12-31 23:07 41 ********************** 69 2024-01-01 00:06 43 ************************ 70 2024-01-01 01:05 43 ************************ 71 2024-01-01 02:04 41 ********************** 72 2024-01-01 03:03 41 ********************** 73 2024-01-01 04:02 40 ********************* ... ..( 5 skipped). .. ********************* 79 2024-01-01 09:56 40 ********************* 80 2024-01-01 10:55 41 ********************** 81 2024-01-01 11:54 40 ********************* 82 2024-01-01 12:53 ? - 83 2024-01-01 13:52 41 ********************** 84 2024-01-01 14:51 39 ******************** 85 2024-01-01 15:50 ? - 86 2024-01-01 16:49 38 ******************* 87 2024-01-01 17:48 40 ********************* 88 2024-01-01 18:47 40 ********************* 89 2024-01-01 19:46 42 *********************** 90 2024-01-01 20:45 42 *********************** 91 2024-01-01 21:44 43 ************************ 92 2024-01-01 22:43 44 ************************* 93 2024-01-01 23:42 41 ********************** 94 2024-01-02 00:41 40 ********************* 95 2024-01-02 01:40 41 ********************** ... ..( 5 skipped). .. ********************** 101 2024-01-02 07:34 41 ********************** 102 2024-01-02 08:33 42 *********************** 103 2024-01-02 09:32 42 *********************** 104 2024-01-02 10:31 43 ************************ 105 2024-01-02 11:30 41 ********************** ... ..( 12 skipped). .. ********************** 118 2024-01-03 00:17 41 ********************** 119 2024-01-03 01:16 42 *********************** 120 2024-01-03 02:15 41 ********************** 121 2024-01-03 03:14 41 ********************** 122 2024-01-03 04:13 41 ********************** 123 2024-01-03 05:12 42 *********************** 124 2024-01-03 06:11 43 ************************ 125 2024-01-03 07:10 42 *********************** 126 2024-01-03 08:09 41 ********************** ... ..( 3 skipped). .. ********************** 2 2024-01-03 12:05 41 ********************** 3 2024-01-03 13:04 40 ********************* 4 2024-01-03 14:03 41 ********************** 5 2024-01-03 15:02 40 ********************* ... ..( 3 skipped). .. ********************* 9 2024-01-03 18:58 40 ********************* 10 2024-01-03 19:57 41 ********************** 11 2024-01-03 20:56 43 ************************ 12 2024-01-03 21:55 42 *********************** 13 2024-01-03 22:54 42 *********************** 14 2024-01-03 23:53 41 ********************** ... ..( 2 skipped). .. ********************** 17 2024-01-04 02:50 41 ********************** 18 2024-01-04 03:49 43 ************************ 19 2024-01-04 04:48 43 ************************ 20 2024-01-04 05:47 41 ********************** ... ..( 4 skipped). .. ********************** 25 2024-01-04 10:42 41 ********************** 26 2024-01-04 11:41 40 ********************* 27 2024-01-04 12:40 41 ********************** ... ..( 7 skipped). .. ********************** 35 2024-01-04 20:32 41 ********************** 36 2024-01-04 21:31 40 ********************* ... ..( 4 skipped). .. ********************* 41 2024-01-05 02:26 40 ********************* 42 2024-01-05 03:25 41 ********************** 43 2024-01-05 04:24 40 ********************* 44 2024-01-05 05:23 41 ********************** 45 2024-01-05 06:22 41 ********************** 46 2024-01-05 07:21 41 ********************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 380 --- Lifetime Power-On Resets 0x01 0x010 4 20157 --- Power-on Hours 0x01 0x018 6 80329146000 --- Logical Sectors Written 0x01 0x020 6 70422067 --- Number of Write Commands 0x01 0x028 6 65169183332 --- Logical Sectors Read 0x01 0x030 6 141532735 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18644 --- Spindle Motor Power-on Hours 0x03 0x010 4 8375 --- Head Flying Hours 0x03 0x018 4 169691 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 198 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x010 1 40 --- Average Short Term Temperature 0x05 0x018 1 41 --- Average Long Term Temperature 0x05 0x020 1 57 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 54 --- Highest Average Short Term Temperature 0x05 0x038 1 26 --- Lowest Average Short Term Temperature 0x05 0x040 1 45 --- Highest Average Long Term Temperature 0x05 0x048 1 33 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 3645 --- Number of Hardware Resets 0x06 0x010 4 1222 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == 0xff 0x010 7 0 --- Vendor Specific 0xff 0x018 7 0 --- Vendor Specific |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS Seagate FARM log (GP Log 0xa6) supported [try: -l farm] /dev/sdd smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Ultrastar DC HC560 Device Model: WDC WUH722020ALE6L4 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: PQGNW108 User Capacity: 20,000,588,955,648 bytes [20.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5528 ATA Version is: ACS-5 (minor revision not indicated) SATA Version is: SATA 3.5, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 5 07:52:51 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (2229) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 2 Throughput_Performance P-S--- 148 148 054 - 47 3 Spin_Up_Time POS--- 083 083 001 - 357 (Average 357) 4 Start_Stop_Count -O--C- 100 100 000 - 300 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 7 Seek_Error_Rate PO-R-- 100 100 001 - 0 8 Seek_Time_Performance P-S--- 140 140 020 - 15 9 Power_On_Hours -O--C- 100 100 000 - 8810 10 Spin_Retry_Count PO--C- 100 100 001 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 217 22 Helium_Level PO---K 100 100 025 - 6553700 90 NAND_Master P---CK 100 100 001 - 0x000d00000000 192 Power-Off_Retract_Count -O--CK 100 100 000 - 5378 193 Load_Cycle_Count -O--C- 100 100 000 - 5378 194 Temperature_Celsius -O---- 054 054 000 - 40 (Min/Max 21/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 256 Device Statistics log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 17579 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 256 Current Device Internal Status Data log 0x25 GPL R/O 256 Saved Device Internal Status Data log 0x2f GPL R/O 1 Set Sector Configuration 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xd8-0xd9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 34/43 Celsius Lifetime Min/Max Temperature: 21/54 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) Minimum supported ERC Time Limit: 65 (6.5 seconds) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2024-01-05 05:45 38 ******************* 51 2024-01-05 05:46 38 ******************* 52 2024-01-05 05:47 39 ******************** ... ..( 8 skipped). .. ******************** 61 2024-01-05 05:56 39 ******************** 62 2024-01-05 05:57 38 ******************* ... ..( 6 skipped). .. ******************* 69 2024-01-05 06:04 38 ******************* 70 2024-01-05 06:05 39 ******************** ... ..( 27 skipped). .. ******************** 98 2024-01-05 06:33 39 ******************** 99 2024-01-05 06:34 40 ********************* ... ..( 5 skipped). .. ********************* 105 2024-01-05 06:40 40 ********************* 106 2024-01-05 06:41 39 ******************** ... ..( 10 skipped). .. ******************** 117 2024-01-05 06:52 39 ******************** 118 2024-01-05 06:53 40 ********************* 119 2024-01-05 06:54 40 ********************* 120 2024-01-05 06:55 40 ********************* 121 2024-01-05 06:56 39 ******************** ... ..( 10 skipped). .. ******************** 4 2024-01-05 07:07 39 ******************** 5 2024-01-05 07:08 40 ********************* 6 2024-01-05 07:09 40 ********************* 7 2024-01-05 07:10 39 ******************** ... ..( 13 skipped). .. ******************** 21 2024-01-05 07:24 39 ******************** 22 2024-01-05 07:25 40 ********************* ... ..( 25 skipped). .. ********************* 48 2024-01-05 07:51 40 ********************* 49 2024-01-05 07:52 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 217 --- Lifetime Power-On Resets 0x01 0x010 4 8810 --- Power-on Hours 0x01 0x018 6 65428937411 --- Logical Sectors Written 0x01 0x020 6 60897129 --- Number of Write Commands 0x01 0x028 6 39954889145 --- Logical Sectors Read 0x01 0x030 6 125782316 --- Number of Read Commands 0x01 0x038 6 31718512750 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 8353 --- Spindle Motor Power-on Hours 0x03 0x010 4 8353 --- Head Flying Hours 0x03 0x018 4 5378 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 29 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x04 0x018 4 0 --- Physical Element Status Changed 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x010 1 39 N-- Average Short Term Temperature 0x05 0x018 1 39 N-- Average Long Term Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 51 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 43 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1648 --- Number of Hardware Resets 0x06 0x010 4 635 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0xff ===== = = === == Vendor Specific Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sde smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-273-tkg-eevdf] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSDPR-CX400-01T Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: SBFMJ1.3 User Capacity: 1,024,209,543,168 bytes [1.02 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 5 07:52:52 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 33221 12 Power_Cycle_Count -O--C- 100 100 000 - 595 168 Unknown_Attribute -O--C- 100 100 000 - 0 170 Unknown_Attribute PO---- 078 078 010 - 276 173 Unknown_Attribute -O--C- 100 100 000 - 1638437 192 Power-Off_Retract_Count -O--C- 100 100 000 - 502 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 Unknown_Attribute PO-R-- 100 100 050 - 2 231 Unknown_SSD_Attribute PO--C- 100 100 000 - 97 241 Total_LBAs_Written -O--C- 100 100 000 - 6802 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 595 --- Lifetime Power-On Resets 0x01 0x010 4 33221 --- Power-on Hours 0x01 0x018 6 14265739100 --- Logical Sectors Written 0x01 0x028 6 33826286625 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 2 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 9 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC