/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop HDD Device Model: ST320LT012-1DG14C Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001SDM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Oct 16 10:29:58 2021 -04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 93) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 104 099 006 - 6962600 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2766 5 Reallocated_Sector_Ct PO--CK 052 052 036 - 7976 7 Seek_Error_Rate POSR-- 060 054 030 - 124586204170 9 Power_On_Hours -O--CK 098 098 000 - 2421 (197 47 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 098 020 - 2797 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 078 078 000 - 22 188 Command_Timeout -O--CK 100 098 000 - 16 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 052 045 - 31 (Min/Max 31/31) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1028 192 Power-Off_Retract_Count -O--CK 100 100 000 - 186 193 Load_Cycle_Count -O--CK 080 080 000 - 40014 194 Temperature_Celsius -O---K 031 048 000 - 31 (0 14 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 098 098 000 - 1887 (26 107 0) 241 Total_LBAs_Written ------ 100 253 000 - 5904401990 242 Total_LBAs_Read ------ 100 253 000 - 8311180823 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 18 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 20/33 Celsius Lifetime Min/Max Temperature: 14/49 Celsius Specified Max Operating Temperature: 32 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (94) Index Estimated Time Temperature Celsius 95 2021-10-13 18:30 30 *********** 96 2021-10-13 19:00 29 ********** 97 2021-10-13 19:30 29 ********** 98 2021-10-13 20:00 ? - 99 2021-10-13 20:30 20 * 100 2021-10-13 21:00 30 *********** 101 2021-10-13 21:30 30 *********** 102 2021-10-13 22:00 32 ************* ... ..( 4 skipped). .. ************* 107 2021-10-14 00:30 32 ************* 108 2021-10-14 01:00 ? - 109 2021-10-14 01:30 22 *** 110 2021-10-14 02:00 ? - 111 2021-10-14 02:30 30 *********** 112 2021-10-14 03:00 31 ************ 113 2021-10-14 03:30 ? - 114 2021-10-14 04:00 20 * 115 2021-10-14 04:30 30 *********** 116 2021-10-14 05:00 ? - 117 2021-10-14 05:30 18 - 118 2021-10-14 06:00 28 ********* 119 2021-10-14 06:30 30 *********** 120 2021-10-14 07:00 31 ************ 121 2021-10-14 07:30 30 *********** ... ..( 4 skipped). .. *********** 126 2021-10-14 10:00 30 *********** 127 2021-10-14 10:30 32 ************* 0 2021-10-14 11:00 32 ************* 1 2021-10-14 11:30 32 ************* 2 2021-10-14 12:00 31 ************ ... ..( 2 skipped). .. ************ 5 2021-10-14 13:30 31 ************ 6 2021-10-14 14:00 ? - 7 2021-10-14 14:30 22 *** 8 2021-10-14 15:00 31 ************ ... ..( 3 skipped). .. ************ 12 2021-10-14 17:00 31 ************ 13 2021-10-14 17:30 ? - 14 2021-10-14 18:00 20 * 15 2021-10-14 18:30 29 ********** 16 2021-10-14 19:00 30 *********** 17 2021-10-14 19:30 30 *********** 18 2021-10-14 20:00 30 *********** 19 2021-10-14 20:30 31 ************ 20 2021-10-14 21:00 32 ************* 21 2021-10-14 21:30 31 ************ 22 2021-10-14 22:00 32 ************* 23 2021-10-14 22:30 32 ************* 24 2021-10-14 23:00 32 ************* 25 2021-10-14 23:30 31 ************ 26 2021-10-15 00:00 32 ************* 27 2021-10-15 00:30 32 ************* 28 2021-10-15 01:00 31 ************ 29 2021-10-15 01:30 ? - 30 2021-10-15 02:00 20 * 31 2021-10-15 02:30 29 ********** 32 2021-10-15 03:00 30 *********** 33 2021-10-15 03:30 30 *********** 34 2021-10-15 04:00 ? - 35 2021-10-15 04:30 20 * 36 2021-10-15 05:00 29 ********** 37 2021-10-15 05:30 31 ************ ... ..( 2 skipped). .. ************ 40 2021-10-15 07:00 31 ************ 41 2021-10-15 07:30 30 *********** 42 2021-10-15 08:00 30 *********** 43 2021-10-15 08:30 31 ************ 44 2021-10-15 09:00 32 ************* 45 2021-10-15 09:30 32 ************* 46 2021-10-15 10:00 ? - 47 2021-10-15 10:30 20 * 48 2021-10-15 11:00 30 *********** 49 2021-10-15 11:30 31 ************ 50 2021-10-15 12:00 31 ************ 51 2021-10-15 12:30 ? - 52 2021-10-15 13:00 21 ** 53 2021-10-15 13:30 32 ************* 54 2021-10-15 14:00 33 ************** 55 2021-10-15 14:30 33 ************** 56 2021-10-15 15:00 ? - 57 2021-10-15 15:30 20 * 58 2021-10-15 16:00 29 ********** 59 2021-10-15 16:30 30 *********** 60 2021-10-15 17:00 30 *********** 61 2021-10-15 17:30 30 *********** 62 2021-10-15 18:00 ? - 63 2021-10-15 18:30 20 * 64 2021-10-15 19:00 29 ********** 65 2021-10-15 19:30 30 *********** 66 2021-10-15 20:00 31 ************ ... ..( 2 skipped). .. ************ 69 2021-10-15 21:30 31 ************ 70 2021-10-15 22:00 ? - 71 2021-10-15 22:30 22 *** 72 2021-10-15 23:00 ? - 73 2021-10-15 23:30 21 ** 74 2021-10-16 00:00 ? - 75 2021-10-16 00:30 21 ** 76 2021-10-16 01:00 30 *********** 77 2021-10-16 01:30 ? - 78 2021-10-16 02:00 27 ******** 79 2021-10-16 02:30 31 ************ 80 2021-10-16 03:00 31 ************ 81 2021-10-16 03:30 32 ************* 82 2021-10-16 04:00 33 ************** 83 2021-10-16 04:30 33 ************** 84 2021-10-16 05:00 33 ************** 85 2021-10-16 05:30 ? - 86 2021-10-16 06:00 20 * 87 2021-10-16 06:30 30 *********** 88 2021-10-16 07:00 31 ************ 89 2021-10-16 07:30 32 ************* 90 2021-10-16 08:00 33 ************** 91 2021-10-16 08:30 31 ************ 92 2021-10-16 09:00 30 *********** 93 2021-10-16 09:30 31 ************ 94 2021-10-16 10:00 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda SpinPoint F3 Device Model: ST500DM005 HD502HJ Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 1AJ10001 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Oct 16 10:29:59 2021 -04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4560) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 76) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 12 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 082 045 025 - 5571 4 Start_Stop_Count -O--CK 096 096 000 - 4963 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8972 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 2 12 Power_Cycle_Count -O--CK 096 096 000 - 4464 191 G-Sense_Error_Rate -O---K 100 100 000 - 59 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 061 000 - 28 (Min/Max 13/40) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 044 001 000 - 30070 200 Multi_Zone_Error_Rate -O-R-K 001 001 000 - 589232 223 Load_Retry_Count -O--CK 100 100 000 - 2 225 Load_Cycle_Count -O--CK 100 100 000 - 5206 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 30080 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 30080 [7] occurred at disk power-on lifetime: 6696 hours (279 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 77 a7 e0 50 e0 00 Error: IDNF 8 sectors at LBA = 0x77a7e050 = 2007490640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 77 a7 e0 50 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.546 READ DMA EXT Error 30079 [6] occurred at disk power-on lifetime: 6696 hours (279 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.546 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT Error 30078 [5] occurred at disk power-on lifetime: 6696 hours (279 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT Error 30077 [4] occurred at disk power-on lifetime: 6696 hours (279 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT 35 00 00 00 01 00 00 00 03 47 d0 e0 08 00:00:08.545 WRITE DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT Error 30076 [3] occurred at disk power-on lifetime: 6696 hours (279 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:08.545 READ DMA EXT Error 30075 [2] occurred at disk power-on lifetime: 6629 hours (276 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 77 a7 e0 50 e0 00 Error: IDNF 8 sectors at LBA = 0x77a7e050 = 2007490640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 77 a7 e0 50 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:02.576 READ DMA EXT Error 30074 [1] occurred at disk power-on lifetime: 6629 hours (276 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:02.576 READ DMA EXT Error 30073 [0] occurred at disk power-on lifetime: 6629 hours (276 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 71 05 1f 48 e0 00 Error: IDNF 8 sectors at LBA = 0x71051f48 = 1896161096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 04 82 57 f0 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 08 00 00 71 05 1f 48 e0 08 00:00:02.576 READ DMA EXT 25 00 00 00 01 00 00 04 82 58 00 e0 08 00:00:02.576 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 20/28 Celsius Lifetime Min/Max Temperature: 16/65 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (51) Index Estimated Time Temperature Celsius 52 2021-10-15 23:50 24 ***** 53 2021-10-15 23:55 25 ****** 54 2021-10-16 00:00 26 ******* 55 2021-10-16 00:05 26 ******* 56 2021-10-16 00:10 27 ******** 57 2021-10-16 00:15 27 ******** 58 2021-10-16 00:20 28 ********* ... ..( 20 skipped). .. ********* 79 2021-10-16 02:05 28 ********* 80 2021-10-16 02:10 29 ********** ... ..( 3 skipped). .. ********** 84 2021-10-16 02:30 29 ********** 85 2021-10-16 02:35 28 ********* 86 2021-10-16 02:40 20 * 87 2021-10-16 02:45 23 **** 88 2021-10-16 02:50 24 ***** 89 2021-10-16 02:55 26 ******* 90 2021-10-16 03:00 27 ******** ... ..( 2 skipped). .. ******** 93 2021-10-16 03:15 27 ******** 94 2021-10-16 03:20 28 ********* ... ..( 4 skipped). .. ********* 99 2021-10-16 03:45 28 ********* 100 2021-10-16 03:50 29 ********** ... ..( 26 skipped). .. ********** 127 2021-10-16 06:05 29 ********** 0 2021-10-16 06:10 20 * 1 2021-10-16 06:15 22 *** 2 2021-10-16 06:20 24 ***** 3 2021-10-16 06:25 25 ****** 4 2021-10-16 06:30 26 ******* 5 2021-10-16 06:35 26 ******* 6 2021-10-16 06:40 27 ******** ... ..( 5 skipped). .. ******** 12 2021-10-16 07:10 27 ******** 13 2021-10-16 07:15 28 ********* ... ..( 20 skipped). .. ********* 34 2021-10-16 09:00 28 ********* 35 2021-10-16 09:05 27 ******** 36 2021-10-16 09:10 27 ******** 37 2021-10-16 09:15 27 ******** 38 2021-10-16 09:20 28 ********* ... ..( 12 skipped). .. ********* 51 2021-10-16 10:25 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific