/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 3.5 Device Model: ST1000DM010-2EP102 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC43 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue May 26 04:46:32 2020 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 105) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 063 006 - 83123518 3 Spin_Up_Time PO---- 097 096 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1176 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 075 060 045 - 8654939950 9 Power_On_Hours -O--CK 098 098 000 - 2578 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 1008 183 Runtime_Bad_Block -O--CK 098 098 000 - 2 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 0 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 078 059 040 - 22 (Min/Max 19/23) 193 Load_Cycle_Count -O--CK 100 100 000 - 1179 194 Temperature_Celsius -O---K 022 013 000 - 22 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 007 001 000 - 83123518 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1 240 Head_Flying_Hours ------ 100 253 000 - 2567h+59m+48.257s 241 Total_LBAs_Written ------ 100 253 000 - 20137142477 242 Total_LBAs_Read ------ 100 253 000 - 15701851539 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4120 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4800 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 18/21 Celsius Lifetime Min/Max Temperature: 13/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1008 --- Lifetime Power-On Resets 0x01 0x010 4 2578 --- Power-on Hours 0x01 0x018 6 20180188559 --- Logical Sectors Written 0x01 0x020 6 297130277 --- Number of Write Commands 0x01 0x028 6 15759256571 --- Logical Sectors Read 0x01 0x030 6 448215644 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2530 --- Spindle Motor Power-on Hours 0x03 0x010 4 2501 --- Head Flying Hours 0x03 0x018 4 1179 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 21 --- Current Temperature 0x05 0x010 1 30 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 37 --- Highest Average Short Term Temperature 0x05 0x038 1 27 --- Lowest Average Short Term Temperature 0x05 0x040 1 34 --- Highest Average Long Term Temperature 0x05 0x048 1 29 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 13 --- Specified Minimum Operating Temperature |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD10EZRX-00L4HB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue May 26 04:46:33 2020 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13920) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 158) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 141 127 021 - 3941 4 Start_Stop_Count -O--CK 097 097 000 - 3051 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 088 088 000 - 8940 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2847 192 Power-Off_Retract_Count -O--CK 200 200 000 - 721 193 Load_Cycle_Count -O--CK 134 134 000 - 199298 194 Temperature_Celsius -O---K 123 091 000 - 20 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1237 - # 2 Extended offline Aborted by host 90% 1237 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 20 Celsius Power Cycle Min/Max Temperature: 18/20 Celsius Lifetime Min/Max Temperature: 0/52 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (139) Index Estimated Time Temperature Celsius 140 2020-05-25 20:49 28 ********* ... ..( 17 skipped). .. ********* 158 2020-05-25 21:07 28 ********* 159 2020-05-25 21:08 27 ******** 160 2020-05-25 21:09 27 ******** 161 2020-05-25 21:10 28 ********* ... ..( 74 skipped). .. ********* 236 2020-05-25 22:25 28 ********* 237 2020-05-25 22:26 27 ******** 238 2020-05-25 22:27 28 ********* ... ..( 7 skipped). .. ********* 246 2020-05-25 22:35 28 ********* 247 2020-05-25 22:36 27 ******** ... ..( 60 skipped). .. ******** 308 2020-05-25 23:37 27 ******** 309 2020-05-25 23:38 ? - 310 2020-05-25 23:39 27 ******** 311 2020-05-25 23:40 28 ********* ... ..(113 skipped). .. ********* 425 2020-05-26 01:34 28 ********* 426 2020-05-26 01:35 ? - 427 2020-05-26 01:36 28 ********* ... ..( 69 skipped). .. ********* 19 2020-05-26 02:46 28 ********* 20 2020-05-26 02:47 27 ******** 21 2020-05-26 02:48 27 ******** 22 2020-05-26 02:49 28 ********* ... ..( 8 skipped). .. ********* 31 2020-05-26 02:58 28 ********* 32 2020-05-26 02:59 27 ******** 33 2020-05-26 03:00 28 ********* 34 2020-05-26 03:01 27 ******** ... ..( 19 skipped). .. ******** 54 2020-05-26 03:21 27 ******** 55 2020-05-26 03:22 ? - 56 2020-05-26 03:23 18 - 57 2020-05-26 03:24 18 - 58 2020-05-26 03:25 18 - 59 2020-05-26 03:26 19 - 60 2020-05-26 03:27 20 * 61 2020-05-26 03:28 20 * 62 2020-05-26 03:29 27 ******** 63 2020-05-26 03:30 28 ********* ... ..( 11 skipped). .. ********* 75 2020-05-26 03:42 28 ********* 76 2020-05-26 03:43 27 ******** 77 2020-05-26 03:44 28 ********* 78 2020-05-26 03:45 28 ********* 79 2020-05-26 03:46 27 ******** 80 2020-05-26 03:47 28 ********* ... ..( 27 skipped). .. ********* 108 2020-05-26 04:15 28 ********* 109 2020-05-26 04:16 27 ******** 110 2020-05-26 04:17 27 ******** 111 2020-05-26 04:18 28 ********* ... ..( 2 skipped). .. ********* 114 2020-05-26 04:21 28 ********* 115 2020-05-26 04:22 27 ******** 116 2020-05-26 04:23 28 ********* ... ..( 11 skipped). .. ********* 128 2020-05-26 04:35 28 ********* 129 2020-05-26 04:36 27 ******** 130 2020-05-26 04:37 28 ********* 131 2020-05-26 04:38 28 ********* 132 2020-05-26 04:39 27 ******** 133 2020-05-26 04:40 28 ********* ... ..( 5 skipped). .. ********* 139 2020-05-26 04:46 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 323 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs Device Model: CT120BX500SSD1 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: M6CR013 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 26 04:46:33 2020 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 050 - 2217 12 Power_Cycle_Count -O--CK 100 100 050 - 335 171 Program_Fail_Count -O--CK 100 100 050 - 0 172 Erase_Fail_Count -O--CK 100 100 050 - 0 173 Ave_Block-Erase_Count -O--CK 100 100 050 - 43 174 Unexpect_Power_Loss_Ct -O--CK 100 100 050 - 71 180 Unused_Reserve_NAND_Blk -O--CK 100 100 050 - 100 183 SATA_Interfac_Downshift -O--CK 100 100 050 - 0 184 Error_Correction_Count -O--CK 100 100 050 - 0 187 Reported_Uncorrect -O--CK 100 100 050 - 0 194 Temperature_Celsius -O---K 067 042 050 Past 33 (Min/Max 27/58) 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable ----CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 202 Percent_Lifetime_Remain ----CK 098 098 001 - 98 206 Write_Error_Rate -OSR-K 100 100 050 - 0 210 Success_RAIN_Recov_Cnt -O--CK 100 100 050 - 0 246 Total_LBAs_Written -O--CK 100 100 050 - 2964297615 247 Host_Program_Page_Count -O--CK 100 100 050 - 92634300 248 FTL_Program_Page_Count -O--CK 100 100 050 - 79129632 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 32 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] log entry is empty SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 335 --- Lifetime Power-On Resets 0x01 0x010 4 2217 --- Power-on Hours 0x01 0x018 6 2964297615 --- Logical Sectors Written 0x01 0x020 6 32049979 --- Number of Write Commands 0x01 0x028 6 2321656240 --- Logical Sectors Read 0x01 0x030 6 18779071 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET /dev/sdd smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop HDD Device Model: ST500LT012-9WS142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001SDM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue May 26 04:46:33 2020 +05 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 101) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 104 099 006 - 7318984 3 Spin_Up_Time PO---- 099 098 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3667 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 24 7 Seek_Error_Rate POSR-- 056 049 030 - 721634846003 9 Power_On_Hours -O--CK 088 088 000 - 10703 (218 189 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3221 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 092 092 000 - 8 188 Command_Timeout -O--CK 100 060 000 - 137441050821 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 078 047 045 - 22 (Min/Max 20/22) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 111 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1919 193 Load_Cycle_Count -O--CK 063 063 000 - 75172 194 Temperature_Celsius -O---K 022 053 000 - 22 (0 3 0 0 0) 196 Reallocated_Event_Count POSR-- 095 095 030 - 5174 (44713 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 127 000 - 76 240 Head_Flying_Hours ------ 095 095 000 - 5174 (174 169 0) 241 Total_LBAs_Written ------ 100 253 000 - 2119230712 242 Total_LBAs_Read ------ 100 253 000 - 489908603 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 4350 hours (181 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 60 08 00 00 00 Error: UNC at LBA = 0x00600800 = 6293504 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 60 08 00 40 00 00:30:08.083 READ DMA EXT 25 00 00 00 01 00 00 00 00 08 00 40 00 00:30:08.031 READ DMA EXT 25 00 00 00 04 00 00 00 00 08 40 40 00 00:30:08.025 READ DMA EXT 25 00 00 00 20 00 00 00 00 08 00 40 00 00:30:08.023 READ DMA EXT 25 00 00 00 10 00 00 00 00 08 00 40 00 00:30:08.017 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 20/22 Celsius Lifetime Min/Max Temperature: 3/53 Celsius Specified Max Operating Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2020-05-23 13:00 30 *********** 79 2020-05-23 13:30 30 *********** 80 2020-05-23 14:00 30 *********** 81 2020-05-23 14:30 31 ************ 82 2020-05-23 15:00 29 ********** 83 2020-05-23 15:30 ? - 84 2020-05-23 16:00 23 **** 85 2020-05-23 16:30 24 ***** 86 2020-05-23 17:00 ? - 87 2020-05-23 17:30 28 ********* 88 2020-05-23 18:00 29 ********** 89 2020-05-23 18:30 30 *********** ... ..( 4 skipped). .. *********** 94 2020-05-23 21:00 30 *********** 95 2020-05-23 21:30 ? - 96 2020-05-23 22:00 18 - 97 2020-05-23 22:30 20 * 98 2020-05-23 23:00 28 ********* 99 2020-05-23 23:30 29 ********** 100 2020-05-24 00:00 30 *********** 101 2020-05-24 00:30 30 *********** 102 2020-05-24 01:00 30 *********** 103 2020-05-24 01:30 28 ********* 104 2020-05-24 02:00 29 ********** 105 2020-05-24 02:30 28 ********* 106 2020-05-24 03:00 28 ********* 107 2020-05-24 03:30 36 ***************** 108 2020-05-24 04:00 28 ********* 109 2020-05-24 04:30 28 ********* 110 2020-05-24 05:00 ? - 111 2020-05-24 05:30 23 **** 112 2020-05-24 06:00 ? - 113 2020-05-24 06:30 28 ********* ... ..( 2 skipped). .. ********* 116 2020-05-24 08:00 28 ********* 117 2020-05-24 08:30 ? - 118 2020-05-24 09:00 19 - 119 2020-05-24 09:30 ? - 120 2020-05-24 10:00 26 ******* 121 2020-05-24 10:30 ? - 122 2020-05-24 11:00 28 ********* 123 2020-05-24 11:30 ? - 124 2020-05-24 12:00 27 ******** 125 2020-05-24 12:30 ? - 126 2020-05-24 13:00 27 ******** ... ..( 2 skipped). .. ******** 1 2020-05-24 14:30 27 ******** 2 2020-05-24 15:00 28 ********* 3 2020-05-24 15:30 27 ******** ... ..( 2 skipped). .. ******** 6 2020-05-24 17:00 27 ******** 7 2020-05-24 17:30 35 **************** 8 2020-05-24 18:00 36 ***************** 9 2020-05-24 18:30 29 ********** 10 2020-05-24 19:00 28 ********* ... ..( 4 skipped). .. ********* 15 2020-05-24 21:30 28 ********* 16 2020-05-24 22:00 29 ********** 17 2020-05-24 22:30 ? - 18 2020-05-24 23:00 28 ********* 19 2020-05-24 23:30 ? - 20 2020-05-25 00:00 21 ** 21 2020-05-25 00:30 23 **** 22 2020-05-25 01:00 28 ********* 23 2020-05-25 01:30 25 ****** 24 2020-05-25 02:00 23 **** 25 2020-05-25 02:30 27 ******** 26 2020-05-25 03:00 27 ******** 27 2020-05-25 03:30 28 ********* 28 2020-05-25 04:00 29 ********** 29 2020-05-25 04:30 29 ********** 30 2020-05-25 05:00 28 ********* 31 2020-05-25 05:30 28 ********* 32 2020-05-25 06:00 28 ********* 33 2020-05-25 06:30 30 *********** 34 2020-05-25 07:00 30 *********** 35 2020-05-25 07:30 29 ********** 36 2020-05-25 08:00 28 ********* 37 2020-05-25 08:30 29 ********** 38 2020-05-25 09:00 28 ********* 39 2020-05-25 09:30 28 ********* 40 2020-05-25 10:00 29 ********** 41 2020-05-25 10:30 29 ********** 42 2020-05-25 11:00 ? - 43 2020-05-25 11:30 20 * 44 2020-05-25 12:00 23 **** 45 2020-05-25 12:30 26 ******* 46 2020-05-25 13:00 27 ******** 47 2020-05-25 13:30 27 ******** 48 2020-05-25 14:00 27 ******** 49 2020-05-25 14:30 25 ****** 50 2020-05-25 15:00 26 ******* 51 2020-05-25 15:30 27 ******** 52 2020-05-25 16:00 28 ********* 53 2020-05-25 16:30 28 ********* 54 2020-05-25 17:00 28 ********* 55 2020-05-25 17:30 27 ******** 56 2020-05-25 18:00 28 ********* 57 2020-05-25 18:30 28 ********* 58 2020-05-25 19:00 27 ******** 59 2020-05-25 19:30 28 ********* ... ..( 9 skipped). .. ********* 69 2020-05-26 00:30 28 ********* 70 2020-05-26 01:00 30 *********** 71 2020-05-26 01:30 29 ********** 72 2020-05-26 02:00 28 ********* 73 2020-05-26 02:30 28 ********* 74 2020-05-26 03:00 28 ********* 75 2020-05-26 03:30 ? - 76 2020-05-26 04:00 20 * 77 2020-05-26 04:30 22 *** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS