/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.12.4-desktop-1omv4050] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-22A23T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed May 26 22:18:17 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 93) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 148 128 021 - 1558 4 Start_Stop_Count -O--CK 082 082 000 - 18167 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 2136 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2063 191 G-Sense_Error_Rate -O--CK 001 001 000 - 5013 192 Power-Off_Retract_Count -O--CK 200 200 000 - 147 193 Load_Cycle_Count -O--CK 085 085 000 - 347624 194 Temperature_Celsius -O---K 113 090 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 24/29 Celsius Lifetime Min/Max Temperature: 24/53 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 54 2021-05-26 20:11 35 **************** ... ..( 21 skipped). .. **************** 76 2021-05-26 20:33 35 **************** 77 2021-05-26 20:34 36 ***************** ... ..( 4 skipped). .. ***************** 82 2021-05-26 20:39 36 ***************** 83 2021-05-26 20:40 35 **************** ... ..( 2 skipped). .. **************** 86 2021-05-26 20:43 35 **************** 87 2021-05-26 20:44 36 ***************** ... ..( 10 skipped). .. ***************** 98 2021-05-26 20:55 36 ***************** 99 2021-05-26 20:56 35 **************** ... ..( 11 skipped). .. **************** 111 2021-05-26 21:08 35 **************** 112 2021-05-26 21:09 36 ***************** ... ..( 6 skipped). .. ***************** 119 2021-05-26 21:16 36 ***************** 120 2021-05-26 21:17 35 **************** 121 2021-05-26 21:18 36 ***************** ... ..( 15 skipped). .. ***************** 9 2021-05-26 21:34 36 ***************** 10 2021-05-26 21:35 37 ****************** 11 2021-05-26 21:36 36 ***************** ... ..( 6 skipped). .. ***************** 18 2021-05-26 21:43 36 ***************** 19 2021-05-26 21:44 35 **************** 20 2021-05-26 21:45 35 **************** 21 2021-05-26 21:46 34 *************** 22 2021-05-26 21:47 35 **************** 23 2021-05-26 21:48 35 **************** 24 2021-05-26 21:49 36 ***************** ... ..( 7 skipped). .. ***************** 32 2021-05-26 21:57 36 ***************** 33 2021-05-26 21:58 35 **************** ... ..( 2 skipped). .. **************** 36 2021-05-26 22:01 35 **************** 37 2021-05-26 22:02 ? - 38 2021-05-26 22:03 24 ***** 39 2021-05-26 22:04 ? - 40 2021-05-26 22:05 23 **** 41 2021-05-26 22:06 24 ***** 42 2021-05-26 22:07 ? - 43 2021-05-26 22:08 24 ***** 44 2021-05-26 22:09 24 ***** 45 2021-05-26 22:10 ? - 46 2021-05-26 22:11 24 ***** 47 2021-05-26 22:12 24 ***** 48 2021-05-26 22:13 ? - 49 2021-05-26 22:14 24 ***** 50 2021-05-26 22:15 25 ****** 51 2021-05-26 22:16 27 ******** 52 2021-05-26 22:17 28 ********* 53 2021-05-26 22:18 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 481 Vendor specific