/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.3.1-zen1-25-zen] (SUSE RPM) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KINGSTON SNVS500G Serial Number: -- Firmware Version: EDFK0N01 PCI Vendor/Subsystem ID: 0x2646 IEEE OUI Identifier: 0x0026b7 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 0026b7 ... Local Time is: Wed Feb 7 19:17:15 2024 CET Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 95 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 4.50W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 2.16W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 1000 1000 4 - 0.0025W - - 4 4 4 4 5000 45000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 1 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 46 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 15% Data Units Read: 168,038,438 [86.0 TB] Data Units Written: 189,208,353 [96.8 TB] Host Read Commands: 1,495,981,391 Host Write Commands: 1,084,568,168 Controller Busy Time: 9,333 Power Cycles: 7,179 Power On Hours: 16,167 Unsafe Shutdowns: 4,329 Media and Data Integrity Errors: 0 Error Information Log Entries: 103,057 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 54 Celsius Temperature Sensor 2: 78 Celsius Error Information (NVMe Log 0x01, 16 of 16 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message 0 103057 0 0xb004 0x4004 - 0 0 - Invalid Field in Command 1 103056 0 0x8007 0x4004 - 0 0 - Invalid Field in Command 2 103055 0 0xa005 0x4004 - 0 0 - Invalid Field in Command 3 103054 0 0xa004 0x4004 - 0 0 - Invalid Field in Command 4 103053 0 0x4006 0x4005 0x028 0 0 - Invalid Field in Command 5 103052 0 0xf007 0x4005 - 0 0 - Invalid Field in Command Read Self-test Log failed: Invalid Field in Command (0x2002) /dev/nvme1n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.3.1-zen1-25-zen] (SUSE RPM) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SM2P41C3 NVMe ADATA 256GB Serial Number: -- Firmware Version: 92401091 PCI Vendor/Subsystem ID: 0x1cc1 IEEE OUI Identifier: 0x707c18 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 707c18 ... Local Time is: Wed Feb 7 19:17:15 2024 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x00df): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Verify Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 83 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 4.5000W - - 0 0 0 0 0 0 1 + 3.0000W - - 1 1 1 1 0 0 2 + 0.6000W - - 2 2 2 2 0 0 3 - 0.0150W - - 3 3 3 3 5000 5000 4 - 0.0030W - - 4 4 4 4 5000 20000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 51 Celsius Available Spare: 100% Available Spare Threshold: 50% Percentage Used: 24% Data Units Read: 45,859,600 [23.4 TB] Data Units Written: 39,861,810 [20.4 TB] Host Read Commands: 473,797,529 Host Write Commands: 225,671,360 Controller Busy Time: 6,116 Power Cycles: 1,910 Power On Hours: 2,576 Unsafe Shutdowns: 907 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 51 Celsius Temperature Sensor 2: 58 Celsius Thermal Temp. 1 Transition Count: 21 Thermal Temp. 2 Transition Count: 8 Thermal Temp. 1 Total Time: 396 Thermal Temp. 2 Total Time: 60 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.3.1-zen1-25-zen] (SUSE RPM) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: GOODRAM Serial Number: -- LU WWN Device Id: 5 02b2a2 ... Add. Product Id: mavlsata Firmware Version: V3.10 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Feb 7 19:17:15 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x35) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours PO--CK 100 100 010 - 39408 12 Power_Cycle_Count PO--CK 100 100 010 - 12898 161 Unknown_Attribute PO--CK 100 100 010 - 0 164 Unknown_Attribute PO--CK 100 100 010 - 305909 165 Unknown_Attribute PO--CK 100 100 010 - 674 166 Unknown_Attribute PO--CK 100 100 010 - 673 167 Unknown_Attribute PO--CK 100 100 010 - 673 169 Unknown_Attribute PO--CK 100 100 010 - 0 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--CK 100 100 010 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 192 Power-Off_Retract_Count PO--CK 100 100 010 - 635 194 Temperature_Celsius PO--CK 100 100 010 - 45 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 241 Total_LBAs_Written PO--CK 100 100 010 - 91773 242 Total_LBAs_Read PO--CK 100 100 010 - 83807 243 Unknown_Attribute PO--CK 100 100 010 - 0 244 Unknown_Attribute PO--CK 100 100 010 - 0 245 Unknown_Attribute PO--CK 100 100 010 - 0 246 Unknown_Attribute PO--CK 100 100 010 - 0 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 251 Unknown_Attribute PO--CK 100 100 010 - 0 252 Unknown_Attribute PO--CK 100 100 010 - 0 253 Unknown_Attribute PO--CK 100 100 010 - 0 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x10 GPL,SL R/O 1 NCQ Command Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported