/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-35-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SATA SSD Serial Number: -- Firmware Version: HAFEA2.0 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Mar 19 12:32:35 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 15 12 Power_Cycle_Count -O--C- 100 100 000 - 27 161 Unknown_Attribute -O--C- 100 100 000 - 249 163 Unknown_Attribute PO---- 100 100 050 - 33 165 Unknown_Attribute ------ 100 100 000 - 4 166 Unknown_Attribute ------ 100 100 000 - 0 167 Unknown_Attribute ------ 100 100 000 - 3 172 Unknown_Attribute -O--C- 100 100 000 - 0 173 Unknown_Attribute -O---K 100 100 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 11 194 Temperature_Celsius PO---K 060 060 000 - 40 (Min/Max 33/40) 196 Reallocated_Event_Count ------ 100 100 000 - 0 198 Offline_Uncorrectable -O--C- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO-R-- 100 100 050 - 0 241 Total_LBAs_Written -O--C- 100 100 000 - 420 242 Total_LBAs_Read -O--C- 100 100 000 - 60 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 27 --- Lifetime Power-On Resets 0x01 0x010 4 15 --- Power-on Hours 0x01 0x018 6 881460513 --- Logical Sectors Written 0x01 0x028 6 127059350 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 40 --- Current Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 171 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-35-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint T166 Device Model: SAMSUNG HD321KJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: CP100-11 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3b SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sat Mar 19 12:32:35 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5912) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 101) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 253 100 051 - 0 3 Spin_Up_Time POS--- 100 100 015 - 5568 4 Start_Stop_Count -O--CK 092 092 000 - 8279 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 11076 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 12 Power_Cycle_Count -O--CK 096 096 000 - 4192 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 11552 187 Reported_Uncorrect -O--CK 086 086 000 - 15 188 Command_Timeout -O--CK 100 100 000 - 54 190 Airflow_Temperature_Cel -O---K 079 055 000 - 21 194 Temperature_Celsius -O---K 175 103 000 - 21 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 11552 196 Reallocated_Event_Count -O--CK 253 253 000 - 0 197 Total_Pending_Sectors -O--C- 253 100 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 548 200 Multi_Zone_Error_Rate -O-R-- 253 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 100 000 - 7 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0000, trying reserved byte (0x01) instead Device Error Count: 2297 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2297 [0] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 22 4e b9 df e0 00 Error: UNC 8 sectors at LBA = 0x224eb9df = 575584735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 22 4e b9 df e0 00 00:13:11.375 READ DMA EXT 35 00 00 01 00 00 00 1f be 81 d7 e0 00 00:13:08.063 WRITE DMA EXT 35 00 00 01 00 00 00 1f be 80 d7 e0 00 00:13:08.063 WRITE DMA EXT 35 00 00 01 00 00 00 1f be 7f d7 e0 00 00:13:08.063 WRITE DMA EXT 35 00 00 01 00 00 00 1f be 7e d7 e0 00 00:13:08.063 WRITE DMA EXT Error 2296 [7] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 22 4e b9 df e0 00 Error: UNC 8 sectors at LBA = 0x224eb9df = 575584735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 22 4e b9 df e0 00 00:13:07.813 READ DMA EXT 25 00 00 00 a0 00 00 15 c5 16 07 e0 00 00:13:05.000 READ DMA EXT 25 00 00 01 00 00 00 15 c5 15 07 e0 00 00:13:05.000 READ DMA EXT 25 00 00 01 00 00 00 15 c5 14 07 e0 00 00:13:05.000 READ DMA EXT 25 00 00 01 00 00 00 15 c5 13 07 e0 00 00:13:05.000 READ DMA EXT Error 2295 [6] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 22 4e b9 df e0 00 Error: UNC 8 sectors at LBA = 0x224eb9df = 575584735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 22 4e b9 df e0 00 00:13:04.500 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ed a7 e0 00 00:13:01.625 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ec a7 e0 00 00:13:01.625 READ DMA EXT 25 00 00 01 00 00 00 15 c4 eb a7 e0 00 00:13:01.625 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ea a7 e0 00 00:13:01.625 READ DMA EXT Error 2294 [5] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 22 4e b9 df e0 00 Error: UNC 128 sectors at LBA = 0x224eb9df = 575584735 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 22 4e b9 df e0 00 00:13:01.563 READ DMA EXT 35 00 00 00 08 00 00 0a f0 a5 5f e0 00 00:12:58.688 WRITE DMA EXT 25 00 00 00 08 00 00 22 4e b9 d7 e0 00 00:12:58.688 READ DMA EXT 25 00 00 00 a0 00 00 15 c4 e6 07 e0 00 00:12:58.688 READ DMA EXT 25 00 00 01 00 00 00 15 c4 e5 07 e0 00 00:12:58.688 READ DMA EXT Error 2293 [4] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 22 4e b9 d7 e0 00 Error: UNC 128 sectors at LBA = 0x224eb9d7 = 575584727 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 22 4e b9 d7 e0 00 00:12:58.563 READ DMA EXT 25 00 00 01 00 00 00 15 c4 dd a7 e0 00 00:12:55.688 READ DMA EXT 25 00 00 01 00 00 00 15 c4 dc a7 e0 00 00:12:55.688 READ DMA EXT 25 00 00 01 00 00 00 15 c4 db a7 e0 00 00:12:55.688 READ DMA EXT 25 00 00 01 00 00 00 15 c4 da a7 e0 00 00:12:55.688 READ DMA EXT Error 2292 [3] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 22 4e b9 cf e0 00 Error: UNC 128 sectors at LBA = 0x224eb9cf = 575584719 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 22 4e b9 cf e0 00 00:12:55.250 READ DMA EXT 25 00 00 01 00 00 00 15 c4 cd a7 e0 00 00:12:52.438 READ DMA EXT 25 00 00 01 00 00 00 15 c4 cc a7 e0 00 00:12:52.438 READ DMA EXT 25 00 00 01 00 00 00 15 c4 cb a7 e0 00 00:12:52.438 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ca a7 e0 00 00:12:52.438 READ DMA EXT Error 2291 [2] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 22 4e b9 c7 e0 00 Error: UNC 128 sectors at LBA = 0x224eb9c7 = 575584711 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 22 4e b9 c7 e0 00 00:12:51.750 READ DMA EXT 25 00 00 01 00 00 00 15 c4 bd a7 e0 00 00:12:48.813 READ DMA EXT 25 00 00 01 00 00 00 15 c4 bc a7 e0 00 00:12:48.813 READ DMA EXT 25 00 00 01 00 00 00 15 c4 bb a7 e0 00 00:12:48.813 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ba a7 e0 00 00:12:48.813 READ DMA EXT Error 2290 [1] occurred at disk power-on lifetime: 11026 hours (459 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 22 4e b9 bf e0 00 Error: UNC 128 sectors at LBA = 0x224eb9bf = 575584703 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 22 4e b9 bf e0 00 00:12:48.625 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ad a7 e0 00 00:12:45.750 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ac a7 e0 00 00:12:45.750 READ DMA EXT 25 00 00 01 00 00 00 15 c4 ab a7 e0 00 00:12:45.750 READ DMA EXT 25 00 00 01 00 00 00 15 c4 aa a7 e0 00 00:12:45.750 READ DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 15/21 Celsius Lifetime Min/Max Temperature: 6/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (106) Index Estimated Time Temperature Celsius 107 2022-03-19 10:25 21 ** 108 2022-03-19 10:26 21 ** 109 2022-03-19 10:27 21 ** 110 2022-03-19 10:28 22 *** ... ..( 12 skipped). .. *** 123 2022-03-19 10:41 22 *** 124 2022-03-19 10:42 23 **** 125 2022-03-19 10:43 14 - 126 2022-03-19 10:44 15 - 127 2022-03-19 10:45 16 - 0 2022-03-19 10:46 16 - 1 2022-03-19 10:47 17 - 2 2022-03-19 10:48 17 - 3 2022-03-19 10:49 18 - 4 2022-03-19 10:50 18 - 5 2022-03-19 10:51 18 - 6 2022-03-19 10:52 19 - ... ..( 2 skipped). .. - 9 2022-03-19 10:55 19 - 10 2022-03-19 10:56 20 * ... ..( 8 skipped). .. * 19 2022-03-19 11:05 20 * 20 2022-03-19 11:06 21 ** ... ..( 16 skipped). .. ** 37 2022-03-19 11:23 21 ** 38 2022-03-19 11:24 22 *** 39 2022-03-19 11:25 16 - 40 2022-03-19 11:26 17 - 41 2022-03-19 11:27 17 - 42 2022-03-19 11:28 18 - 43 2022-03-19 11:29 18 - 44 2022-03-19 11:30 19 - 45 2022-03-19 11:31 19 - 46 2022-03-19 11:32 19 - 47 2022-03-19 11:33 20 * ... ..( 6 skipped). .. * 54 2022-03-19 11:40 20 * 55 2022-03-19 11:41 21 ** ... ..( 23 skipped). .. ** 79 2022-03-19 12:05 21 ** 80 2022-03-19 12:06 22 *** ... ..( 4 skipped). .. *** 85 2022-03-19 12:11 22 *** 86 2022-03-19 12:12 21 ** 87 2022-03-19 12:13 15 - 88 2022-03-19 12:14 16 - 89 2022-03-19 12:15 17 - 90 2022-03-19 12:16 17 - 91 2022-03-19 12:17 18 - 92 2022-03-19 12:18 18 - 93 2022-03-19 12:19 19 - 94 2022-03-19 12:20 19 - 95 2022-03-19 12:21 19 - 96 2022-03-19 12:22 20 * ... ..( 3 skipped). .. * 100 2022-03-19 12:26 20 * 101 2022-03-19 12:27 21 ** ... ..( 4 skipped). .. ** 106 2022-03-19 12:32 21 ** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8001 2 0 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-35-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue (SATA) Device Model: WDC WD5000AAKS-00WWPA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03B01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Mar 19 12:32:35 2022 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 97) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 3 Spin_Up_Time POS--K 139 139 021 - 4016 4 Start_Stop_Count -O--CK 097 097 000 - 3990 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 091 091 000 - 7133 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2709 192 Power-Off_Retract_Count -O--CK 200 200 000 - 307 193 Load_Cycle_Count -O--CK 199 199 000 - 3682 194 Temperature_Celsius -O---K 115 099 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 2444 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 21/28 Celsius Lifetime Min/Max Temperature: ?/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (124) Index Estimated Time Temperature Celsius 125 2022-03-19 04:35 29 ********** ... ..( 21 skipped). .. ********** 147 2022-03-19 04:57 29 ********** 148 2022-03-19 04:58 28 ********* 149 2022-03-19 04:59 29 ********** ... ..( 49 skipped). .. ********** 199 2022-03-19 05:49 29 ********** 200 2022-03-19 05:50 ? - 201 2022-03-19 05:51 29 ********** ... ..( 3 skipped). .. ********** 205 2022-03-19 05:55 29 ********** 206 2022-03-19 05:56 28 ********* 207 2022-03-19 05:57 28 ********* 208 2022-03-19 05:58 ? - 209 2022-03-19 05:59 27 ******** 210 2022-03-19 06:00 ? - 211 2022-03-19 06:01 27 ******** 212 2022-03-19 06:02 ? - 213 2022-03-19 06:03 28 ********* 214 2022-03-19 06:04 27 ******** 215 2022-03-19 06:05 27 ******** 216 2022-03-19 06:06 28 ********* ... ..( 9 skipped). .. ********* 226 2022-03-19 06:16 28 ********* 227 2022-03-19 06:17 27 ******** ... ..( 5 skipped). .. ******** 233 2022-03-19 06:23 27 ******** 234 2022-03-19 06:24 28 ********* 235 2022-03-19 06:25 28 ********* 236 2022-03-19 06:26 27 ******** ... ..( 2 skipped). .. ******** 239 2022-03-19 06:29 27 ******** 240 2022-03-19 06:30 28 ********* ... ..( 9 skipped). .. ********* 250 2022-03-19 06:40 28 ********* 251 2022-03-19 06:41 27 ******** 252 2022-03-19 06:42 28 ********* 253 2022-03-19 06:43 27 ******** ... ..( 2 skipped). .. ******** 256 2022-03-19 06:46 27 ******** 257 2022-03-19 06:47 ? - 258 2022-03-19 06:48 28 ********* ... ..( 2 skipped). .. ********* 261 2022-03-19 06:51 28 ********* 262 2022-03-19 06:52 29 ********** ... ..( 9 skipped). .. ********** 272 2022-03-19 07:02 29 ********** 273 2022-03-19 07:03 28 ********* 274 2022-03-19 07:04 28 ********* 275 2022-03-19 07:05 28 ********* 276 2022-03-19 07:06 ? - 277 2022-03-19 07:07 20 * 278 2022-03-19 07:08 21 ** 279 2022-03-19 07:09 22 *** 280 2022-03-19 07:10 22 *** 281 2022-03-19 07:11 22 *** 282 2022-03-19 07:12 23 **** 283 2022-03-19 07:13 24 ***** 284 2022-03-19 07:14 25 ****** 285 2022-03-19 07:15 25 ****** 286 2022-03-19 07:16 25 ****** 287 2022-03-19 07:17 26 ******* ... ..( 6 skipped). .. ******* 294 2022-03-19 07:24 26 ******* 295 2022-03-19 07:25 27 ******** ... ..( 10 skipped). .. ******** 306 2022-03-19 07:36 27 ******** 307 2022-03-19 07:37 28 ********* ... ..( 2 skipped). .. ********* 310 2022-03-19 07:40 28 ********* 311 2022-03-19 07:41 29 ********** 312 2022-03-19 07:42 29 ********** 313 2022-03-19 07:43 28 ********* 314 2022-03-19 07:44 29 ********** 315 2022-03-19 07:45 29 ********** 316 2022-03-19 07:46 28 ********* 317 2022-03-19 07:47 27 ******** 318 2022-03-19 07:48 27 ******** 319 2022-03-19 07:49 26 ******* ... ..( 2 skipped). .. ******* 322 2022-03-19 07:52 26 ******* 323 2022-03-19 07:53 25 ****** ... ..( 2 skipped). .. ****** 326 2022-03-19 07:56 25 ****** 327 2022-03-19 07:57 24 ***** ... ..( 3 skipped). .. ***** 331 2022-03-19 08:01 24 ***** 332 2022-03-19 08:02 23 **** ... ..( 22 skipped). .. **** 355 2022-03-19 08:25 23 **** 356 2022-03-19 08:26 ? - 357 2022-03-19 08:27 23 **** 358 2022-03-19 08:28 ? - 359 2022-03-19 08:29 22 *** 360 2022-03-19 08:30 22 *** 361 2022-03-19 08:31 23 **** 362 2022-03-19 08:32 25 ****** 363 2022-03-19 08:33 25 ****** 364 2022-03-19 08:34 25 ****** 365 2022-03-19 08:35 26 ******* ... ..( 2 skipped). .. ******* 368 2022-03-19 08:38 26 ******* 369 2022-03-19 08:39 27 ******** ... ..( 2 skipped). .. ******** 372 2022-03-19 08:42 27 ******** 373 2022-03-19 08:43 28 ********* 374 2022-03-19 08:44 28 ********* 375 2022-03-19 08:45 28 ********* 376 2022-03-19 08:46 29 ********** 377 2022-03-19 08:47 28 ********* 378 2022-03-19 08:48 29 ********** ... ..( 26 skipped). .. ********** 405 2022-03-19 09:15 29 ********** 406 2022-03-19 09:16 ? - 407 2022-03-19 09:17 21 ** 408 2022-03-19 09:18 22 *** 409 2022-03-19 09:19 23 **** 410 2022-03-19 09:20 24 ***** 411 2022-03-19 09:21 25 ****** ... ..( 2 skipped). .. ****** 414 2022-03-19 09:24 25 ****** 415 2022-03-19 09:25 26 ******* ... ..( 3 skipped). .. ******* 419 2022-03-19 09:29 26 ******* 420 2022-03-19 09:30 27 ******** ... ..( 2 skipped). .. ******** 423 2022-03-19 09:33 27 ******** 424 2022-03-19 09:34 28 ********* 425 2022-03-19 09:35 27 ******** 426 2022-03-19 09:36 27 ******** 427 2022-03-19 09:37 28 ********* 428 2022-03-19 09:38 28 ********* 429 2022-03-19 09:39 28 ********* 430 2022-03-19 09:40 27 ******** 431 2022-03-19 09:41 28 ********* ... ..( 2 skipped). .. ********* 434 2022-03-19 09:44 28 ********* 435 2022-03-19 09:45 ? - 436 2022-03-19 09:46 27 ******** 437 2022-03-19 09:47 ? - 438 2022-03-19 09:48 27 ******** 439 2022-03-19 09:49 26 ******* ... ..( 2 skipped). .. ******* 442 2022-03-19 09:52 26 ******* 443 2022-03-19 09:53 27 ******** ... ..( 37 skipped). .. ******** 3 2022-03-19 10:31 27 ******** 4 2022-03-19 10:32 26 ******* ... ..( 24 skipped). .. ******* 29 2022-03-19 10:57 26 ******* 30 2022-03-19 10:58 ? - 31 2022-03-19 10:59 19 - 32 2022-03-19 11:00 21 ** 33 2022-03-19 11:01 22 *** 34 2022-03-19 11:02 22 *** 35 2022-03-19 11:03 23 **** 36 2022-03-19 11:04 24 ***** 37 2022-03-19 11:05 24 ***** 38 2022-03-19 11:06 25 ****** ... ..( 2 skipped). .. ****** 41 2022-03-19 11:09 25 ****** 42 2022-03-19 11:10 26 ******* ... ..( 2 skipped). .. ******* 45 2022-03-19 11:13 26 ******* 46 2022-03-19 11:14 27 ******** ... ..( 4 skipped). .. ******** 51 2022-03-19 11:19 27 ******** 52 2022-03-19 11:20 28 ********* ... ..( 7 skipped). .. ********* 60 2022-03-19 11:28 28 ********* 61 2022-03-19 11:29 29 ********** ... ..( 7 skipped). .. ********** 69 2022-03-19 11:37 29 ********** 70 2022-03-19 11:38 ? - 71 2022-03-19 11:39 30 *********** 72 2022-03-19 11:40 29 ********** ... ..( 16 skipped). .. ********** 89 2022-03-19 11:57 29 ********** 90 2022-03-19 11:58 28 ********* 91 2022-03-19 11:59 29 ********** 92 2022-03-19 12:00 29 ********** 93 2022-03-19 12:01 29 ********** 94 2022-03-19 12:02 28 ********* 95 2022-03-19 12:03 29 ********** 96 2022-03-19 12:04 28 ********* 97 2022-03-19 12:05 ? - 98 2022-03-19 12:06 29 ********** ... ..( 6 skipped). .. ********** 105 2022-03-19 12:13 29 ********** 106 2022-03-19 12:14 28 ********* 107 2022-03-19 12:15 29 ********** ... ..( 2 skipped). .. ********** 110 2022-03-19 12:18 29 ********** 111 2022-03-19 12:19 28 ********* 112 2022-03-19 12:20 29 ********** 113 2022-03-19 12:21 29 ********** 114 2022-03-19 12:22 29 ********** 115 2022-03-19 12:23 28 ********* 116 2022-03-19 12:24 29 ********** ... ..( 2 skipped). .. ********** 119 2022-03-19 12:27 29 ********** 120 2022-03-19 12:28 28 ********* 121 2022-03-19 12:29 29 ********** ... ..( 2 skipped). .. ********** 124 2022-03-19 12:32 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1143 Vendor specific