/dev/sdb === START OF INFORMATION SECTION === Device Model: SPCC Solid State Disk Serial Number: -- LU WWN Device Id: 5 02b2a2 ... Add. Product Id: mavlsata Firmware Version: V3.3 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 20 01:46:24 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x35) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours PO--CK 100 100 010 - 8246 12 Power_Cycle_Count PO--CK 100 100 010 - 1055 161 Unknown_Attribute PO--CK 100 100 010 - 0 164 Unknown_Attribute PO--CK 100 100 010 - 24564 165 Unknown_Attribute PO--CK 100 100 010 - 66 166 Unknown_Attribute PO--CK 100 100 010 - 25 167 Unknown_Attribute PO--CK 100 100 010 - 53 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--CK 100 100 010 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 194 Temperature_Celsius PO--CK 100 100 010 - 48 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 241 Total_LBAs_Written PO--CK 100 100 010 - 7846 242 Total_LBAs_Read PO--CK 100 100 010 - 9058 243 Unknown_Attribute PO--CK 100 100 010 - 0 244 Unknown_Attribute PO--CK 100 100 010 - 0 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 251 Unknown_Attribute PO--CK 100 100 010 - 0 252 Unknown_Attribute PO--CK 100 100 010 - 0 253 Unknown_Attribute PO--CK 100 100 010 - 0 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x10 GPL,SL R/O 1 NCQ Command Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3400620AS Serial Number: -- Firmware Version: 3.AAK User Capacity: 400,087,375,360 bytes [400 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed Mar 20 01:46:24 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 132) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 111 074 006 - 38833121 3 Spin_Up_Time PO---- 095 092 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5821 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 056 048 030 - 1082440253933 9 Power_On_Hours -O--CK 064 064 000 - 31740 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4347 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 049 039 045 Past 51 (195 87 54 36 0) 194 Temperature_Celsius -O---K 051 061 000 - 51 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 081 051 000 - 237531518 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 6 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [5] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:06.005 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:12:05.941 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:12:03.861 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 2e 88 00 93 6e e0 00 00:12:03.802 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:03.578 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 5 [4] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:01.975 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:12:01.975 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:12:03.861 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 2e 90 00 93 af e0 00 00:12:03.802 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 2e 90 00 93 af e0 00 00:12:03.578 READ MULTIPLE EXT Error 4 [3] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:13:00.703 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:13:04.984 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:13:04.925 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 2e 88 00 93 6e e0 00 00:13:04.700 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:13:04.636 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 3 [2] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:13:00.703 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:13:00.659 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:13:00.659 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 2e 90 00 93 af e0 00 00:13:00.658 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 2e 90 00 93 af e0 00 00:13:00.658 READ MULTIPLE EXT Error 2 [1] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:06.005 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:12:05.941 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:12:03.861 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 01 01 00 2e 88 00 93 6e e0 00 00:12:03.802 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:03.578 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1 [0] occurred at disk power-on lifetime: 11181 hours (465 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 01 01 00 00 00 00 00 00 ee 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 37 00 00 01 01 00 2e 88 00 93 6e ee 00 00:12:01.975 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 00 00 2e 88 00 93 6e e0 00 00:12:01.975 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 37 00 00 00 00 00 2e 88 00 93 6e ee 00 00:12:03.861 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3] 27 00 00 00 01 00 2e 90 00 93 af e0 00 00:12:03.802 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] 29 00 00 00 01 00 2e 90 00 93 af e0 00 00:12:03.578 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 15 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 203 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint T166 Device Model: SAMSUNG HD501LJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: CR100-11 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3b SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Mar 20 01:46:25 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8961) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 153) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 4 3 Spin_Up_Time POS--- 100 100 015 - 1600 4 Start_Stop_Count -O--CK 100 100 000 - 817 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3787 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 610 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 382627788 187 Reported_Uncorrect -O--CK 253 253 000 - 0 188 Command_Timeout -O--CK 253 253 000 - 0 190 Airflow_Temperature_Cel -O---K 058 054 000 - 42 194 Temperature_Celsius -O---K 112 100 000 - 42 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 382627788 196 Reallocated_Event_Count -O--CK 253 253 000 - 0 197 Total_Pending_Sectors -O--C- 253 253 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 28/46 Celsius Lifetime Min/Max Temperature: 5/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (126) Index Estimated Time Temperature Celsius 127 2019-03-19 23:39 43 ************************ 0 2019-03-19 23:40 43 ************************ 1 2019-03-19 23:41 43 ************************ 2 2019-03-19 23:42 42 *********************** 3 2019-03-19 23:43 43 ************************ ... ..( 2 skipped). .. ************************ 6 2019-03-19 23:46 43 ************************ 7 2019-03-19 23:47 42 *********************** ... ..( 15 skipped). .. *********************** 23 2019-03-20 00:03 42 *********************** 24 2019-03-20 00:04 45 ************************** 25 2019-03-20 00:05 42 *********************** ... ..( 10 skipped). .. *********************** 36 2019-03-20 00:16 42 *********************** 37 2019-03-20 00:17 46 *************************** 38 2019-03-20 00:18 42 *********************** ... ..( 8 skipped). .. *********************** 47 2019-03-20 00:27 42 *********************** 48 2019-03-20 00:28 43 ************************ 49 2019-03-20 00:29 42 *********************** ... ..( 75 skipped). .. *********************** 125 2019-03-20 01:45 42 *********************** 126 2019-03-20 01:46 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 107 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8001 2 0 Vendor specific /dev/sde === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint T133 Device Model: SAMSUNG HD300LJ Serial Number: -- Firmware Version: ZT100-13 User Capacity: 300,069,052,416 bytes [300 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Wed Mar 20 01:46:25 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6950) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 125) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 100 100 015 - 7424 4 Start_Stop_Count -O--CK 090 090 000 - 10915 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 2 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 48042 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 6006 190 Airflow_Temperature_Cel -O---K 054 046 000 - 46 194 Temperature_Celsius -O---K 100 076 000 - 46 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 5255610 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--C- 253 100 000 - 0 198 Offline_Uncorrectable ----CK 253 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 100 000 - 38 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Invalid Error Log index = 0x0000, trying reserved byte (0x06) instead Device Error Count: 54 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 [5] occurred at disk power-on lifetime: 41758 hours (1739 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 80 00 00 0c f9 f8 a8 e0 00 Error: ICRC, ABRT 128 sectors at LBA = 0x0cf9f8a8 = 217708712 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 0c f9 f8 a8 e0 00 1d+10:39:28.250 READ DMA EXT 25 00 00 00 08 00 00 0c f9 f7 e0 e0 00 1d+10:39:28.250 READ DMA EXT 25 00 00 00 c0 00 00 0c f9 f7 e8 e0 00 1d+10:39:28.250 READ DMA EXT 25 00 00 00 10 00 00 0c f9 f7 d0 e0 00 1d+10:39:28.250 READ DMA EXT 25 00 00 00 18 00 00 0c f9 f7 b8 e0 00 1d+10:39:28.250 READ DMA EXT Error 53 [4] occurred at disk power-on lifetime: 41741 hours (1739 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 0c f7 f0 a8 e0 00 Error: ICRC, ABRT 256 sectors at LBA = 0x0cf7f0a8 = 217575592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 0c f7 f0 a8 e0 00 17:44:13.688 READ DMA EXT 25 00 00 01 00 00 00 0c f7 ef a8 e0 00 17:44:13.688 READ DMA EXT 25 00 00 01 00 00 00 0c f7 ee a8 e0 00 17:44:13.688 READ DMA EXT 25 00 00 01 00 00 00 0c f7 ed a8 e0 00 17:44:13.688 READ DMA EXT 25 00 00 01 00 00 00 0c f7 ec a8 e0 00 17:44:13.625 READ DMA EXT Error 52 [3] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 5f f9 d8 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x005ff9d8 = 6289880 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f f9 d8 e0 00 00:07:41.250 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 d0 e0 00 00:07:41.250 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 c8 e0 00 00:07:41.250 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 c0 e0 00 00:07:41.250 READ DMA EXT 25 00 00 00 08 00 00 00 5f f9 b8 e0 00 00:07:41.250 READ DMA EXT Error 51 [2] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 00 00 08 88 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x00000888 = 2184 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 88 e0 00 00:07:41.125 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 80 e0 00 00:07:41.125 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 78 e0 00 00:07:41.125 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 70 e0 00 00:07:41.125 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 68 e0 00 00:07:41.125 READ DMA EXT Error 50 [1] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 0a 84 f9 70 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0a84f970 = 176486768 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0a 84 f9 70 e0 00 00:04:30.813 READ DMA EXT 25 00 00 00 08 00 00 0a 84 f9 68 e0 00 00:04:30.813 READ DMA EXT 25 00 00 00 08 00 00 0a 84 f9 60 e0 00 00:04:30.813 READ DMA EXT 25 00 00 00 08 00 00 0a 84 f9 58 e0 00 00:04:30.813 READ DMA EXT 25 00 00 00 08 00 00 0a 84 f9 50 e0 00 00:04:30.813 READ DMA EXT Error 49 [0] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 0a 84 ea f8 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0a84eaf8 = 176483064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0a 84 ea f8 e0 00 00:04:30.625 READ DMA EXT 25 00 00 00 08 00 00 0a 84 ea f0 e0 00 00:04:30.625 READ DMA EXT 25 00 00 00 08 00 00 0a 84 ea e8 e0 00 00:04:30.625 READ DMA EXT 25 00 00 00 08 00 00 0a 84 ea e0 e0 00 00:04:30.625 READ DMA EXT 25 00 00 00 08 00 00 0a 84 ea d8 e0 00 00:04:30.625 READ DMA EXT Error 48 [7] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 0a 84 e8 a8 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0a84e8a8 = 176482472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0a 84 e8 a8 e0 00 00:04:30.500 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e8 a0 e0 00 00:04:30.500 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e8 98 e0 00 00:04:30.500 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e8 90 e0 00 00:04:30.500 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e8 88 e0 00 00:04:30.500 READ DMA EXT Error 47 [6] occurred at disk power-on lifetime: 41723 hours (1738 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 0a 84 e5 d0 e0 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0a84e5d0 = 176481744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0a 84 e5 d0 e0 00 00:04:30.438 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e5 c8 e0 00 00:04:30.438 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e5 c0 e0 00 00:04:30.438 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e5 b8 e0 00 00:04:30.438 READ DMA EXT 25 00 00 00 08 00 00 0a 84 e5 b0 e0 00 00:04:30.438 READ DMA EXT SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Max Temperature: 47 Celsius Lifetime Max Temperature: 54 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 10/55 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (97) Index Estimated Time Temperature Celsius 98 2019-03-19 23:39 46 *************************** ... ..( 15 skipped). .. *************************** 114 2019-03-19 23:55 46 *************************** 115 2019-03-19 23:56 ? - 116 2019-03-19 23:57 46 *************************** 117 2019-03-19 23:58 ? - 118 2019-03-19 23:59 46 *************************** ... ..( 13 skipped). .. *************************** 4 2019-03-20 00:13 46 *************************** 5 2019-03-20 00:14 ? - 6 2019-03-20 00:15 46 *************************** 7 2019-03-20 00:16 46 *************************** 8 2019-03-20 00:17 ? - 9 2019-03-20 00:18 46 *************************** ... ..( 4 skipped). .. *************************** 14 2019-03-20 00:23 46 *************************** 15 2019-03-20 00:24 ? - 16 2019-03-20 00:25 46 *************************** ... ..( 80 skipped). .. *************************** 97 2019-03-20 01:46 46 *************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 110 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 14 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific