Probe #e27ec40962 of ASUSTek X450CC
Log: smartctl
/dev/sda
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus SpinPoint M8 (AF)
Device Model: ST500LM012 HN-M500MBB
Serial Number: --
LU WWN Device Id: 5 0004cf ...
Firmware Version: 2AR20002
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Dec 22 22:34:57 2015 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6420) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 18
2 Throughput_Performance -OS--K 052 052 000 - 6322
3 Spin_Up_Time PO---K 092 090 025 - 2466
4 Start_Stop_Count -O--CK 096 096 000 - 4832
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 6278
10 Spin_Retry_Count -O--CK 252 252 051 - 0
12 Power_Cycle_Count -O--CK 096 096 000 - 4463
191 G-Sense_Error_Rate -O---K 100 100 000 - 163
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 051 000 - 33 (Min/Max 9/49)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 7402
223 Load_Retry_Count -O--CK 100 100 000 - 172
225 Load_Cycle_Count -O--CK 074 074 000 - 264642
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6232 -
# 2 Extended offline Aborted by host 60% 6200 -
# 3 Extended offline Aborted by host 60% 6160 -
# 4 Extended offline Completed without error 00% 6105 -
# 5 Extended offline Completed without error 00% 6061 -
# 6 Extended offline Aborted by host 80% 6003 -
# 7 Extended offline Aborted by host 90% 5970 -
# 8 Extended offline Aborted by host 90% 5923 -
# 9 Extended offline Completed without error 00% 5888 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 31/33 Celsius
Lifetime Min/Max Temperature: 15/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (80)
Index Estimated Time Temperature Celsius
81 2015-12-22 11:55 33 **************
82 2015-12-22 12:00 36 *****************
83 2015-12-22 12:05 37 ******************
... ..( 15 skipped). .. ******************
99 2015-12-22 13:25 37 ******************
100 2015-12-22 13:30 31 ************
101 2015-12-22 13:35 33 **************
102 2015-12-22 13:40 34 ***************
103 2015-12-22 13:45 34 ***************
104 2015-12-22 13:50 34 ***************
105 2015-12-22 13:55 28 *********
106 2015-12-22 14:00 29 **********
107 2015-12-22 14:05 31 ************
108 2015-12-22 14:10 31 ************
109 2015-12-22 14:15 32 *************
110 2015-12-22 14:20 33 **************
111 2015-12-22 14:25 33 **************
112 2015-12-22 14:30 34 ***************
113 2015-12-22 14:35 34 ***************
114 2015-12-22 14:40 34 ***************
115 2015-12-22 14:45 35 ****************
... ..( 4 skipped). .. ****************
120 2015-12-22 15:10 35 ****************
121 2015-12-22 15:15 34 ***************
122 2015-12-22 15:20 34 ***************
123 2015-12-22 15:25 35 ****************
... ..( 10 skipped). .. ****************
6 2015-12-22 16:20 35 ****************
7 2015-12-22 16:25 36 *****************
... ..( 6 skipped). .. *****************
14 2015-12-22 17:00 36 *****************
15 2015-12-22 17:05 35 ****************
... ..( 6 skipped). .. ****************
22 2015-12-22 17:40 35 ****************
23 2015-12-22 17:45 36 *****************
24 2015-12-22 17:50 36 *****************
25 2015-12-22 17:55 35 ****************
... ..( 2 skipped). .. ****************
28 2015-12-22 18:10 35 ****************
29 2015-12-22 18:15 36 *****************
... ..( 3 skipped). .. *****************
33 2015-12-22 18:35 36 *****************
34 2015-12-22 18:40 37 ******************
35 2015-12-22 18:45 36 *****************
... ..( 5 skipped). .. *****************
41 2015-12-22 19:15 36 *****************
42 2015-12-22 19:20 37 ******************
... ..( 37 skipped). .. ******************
80 2015-12-22 22:30 37 ******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific