Probe #e300be2b5e of Gigabyte GA-990FXA-UD7 Desktop Computer

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-53-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: R5SL120G Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: Q0811B User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 1 16:03:31 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown (0xe001) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 6975 12 Power_Cycle_Count ------ 100 100 000 - 3216 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 64 163 Unknown_Attribute ------ 100 100 000 - 0 164 Unknown_Attribute ------ 100 100 000 - 125050 165 Unknown_Attribute ------ 100 100 000 - 196 166 Unknown_Attribute ------ 100 100 000 - 94 167 Unknown_Attribute ------ 100 100 000 - 144 168 Unknown_Attribute ------ 100 100 000 - 1000 169 Unknown_Attribute ------ 100 100 000 - 86 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 050 - 292 178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 131 194 Temperature_Celsius ------ 100 100 000 - 30 195 Hardware_ECC_Recovered ------ 100 100 000 - 0 196 Reallocated_Event_Count ------ 100 100 016 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 615397 242 Total_LBAs_Read ------ 100 100 000 - 407987 245 Unknown_Attribute ------ 100 100 000 - 500200 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 7 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: -1/ 0 Celsius Lifetime Min/Max Temperature: 0/ 0 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2022-12-01 13:56 0 - ... ..(124 skipped). .. - 127 2022-12-01 16:01 0 - 0 2022-12-01 16:02 30 *********** 1 2022-12-01 16:03 0 - SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3216 --- Lifetime Power-On Resets 0x01 0x010 4 6975 --- Power-on Hours 0x01 0x018 6 1675997016 --- Logical Sectors Written 0x01 0x020 6 2040145286 --- Number of Write Commands 0x01 0x028 6 968063380 --- Logical Sectors Read 0x01 0x030 6 1915994285 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 131 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 83577 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 14 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-53-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 Device Model: TOSHIBA HDWD110 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA8J0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 1 16:03:31 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6828) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 114) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 143 143 054 - 66 3 Spin_Up_Time POS--- 124 124 024 - 185 (Average 185) 4 Start_Stop_Count -O--C- 099 099 000 - 6042 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 105 105 020 - 38 9 Power_On_Hours -O--C- 095 095 000 - 38760 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 5833 192 Power-Off_Retract_Count -O--CK 095 095 000 - 6350 193 Load_Cycle_Count -O--C- 095 095 000 - 6350 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 18/51) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 8 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 4 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 5 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [0] occurred at disk power-on lifetime: 37368 hours (1557 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 18 00 00 25 90 ad b8 05 00 Error: ICRC, ABRT at LBA = 0x2590adb8 = 630238648 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 78 00 00 39 42 ad 40 40 08 00:30:40.998 WRITE FPDMA QUEUED 61 00 08 00 70 00 00 39 d4 c4 48 40 08 00:30:40.998 WRITE FPDMA QUEUED 61 00 08 00 68 00 00 3a 46 d1 70 40 08 00:30:40.998 WRITE FPDMA QUEUED 61 00 08 00 60 00 00 3b ed 3e d0 40 08 00:30:40.998 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 3b f5 27 e8 40 08 00:30:40.998 WRITE FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 37368 hours (1557 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 28 00 00 25 90 ad a8 05 00 Error: ICRC, ABRT at LBA = 0x2590ada8 = 630238632 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 b8 00 00 24 6d 0c c0 40 08 00:30:40.486 WRITE FPDMA QUEUED 61 00 08 00 b0 00 00 3b d5 67 e0 40 08 00:30:40.486 WRITE FPDMA QUEUED 61 00 28 00 a8 00 00 25 90 ad d0 40 08 00:30:40.486 WRITE FPDMA QUEUED 61 00 08 00 78 00 00 21 d8 cc d8 40 08 00:30:40.486 WRITE FPDMA QUEUED 61 00 08 00 70 00 00 23 b2 ac c8 40 08 00:30:40.486 WRITE FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 37368 hours (1557 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 08 00 00 25 90 ad 70 05 00 Error: ICRC, ABRT at LBA = 0x2590ad70 = 630238576 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 c0 00 00 1f 3d 16 10 40 08 00:30:39.704 WRITE FPDMA QUEUED 61 00 08 00 a0 00 00 39 78 a9 e0 40 08 00:30:39.704 WRITE FPDMA QUEUED 61 00 08 00 98 00 00 36 ac ba c0 40 08 00:30:39.704 WRITE FPDMA QUEUED 61 00 08 00 90 00 00 36 80 b1 90 40 08 00:30:39.704 WRITE FPDMA QUEUED 61 00 68 00 88 00 00 25 90 ad 10 40 08 00:30:39.704 WRITE FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 37368 hours (1557 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 3e 8c aa a7 0e 00 Error: ICRC, ABRT at LBA = 0x3e8caaa7 = 1049406119 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 08 00 00 38 f8 a8 08 40 08 00:30:39.166 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 36 b8 b6 88 40 08 00:30:39.166 WRITE FPDMA QUEUED 61 00 08 00 f0 00 00 4a c8 be 68 40 08 00:30:39.166 WRITE FPDMA QUEUED 61 00 08 00 e8 00 00 48 80 b2 68 40 08 00:30:39.166 WRITE FPDMA QUEUED 61 00 08 00 e0 00 00 44 a0 b4 40 40 08 00:30:39.166 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12509 - # 2 Extended offline Completed without error 00% 4 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 26/36 Celsius Lifetime Min/Max Temperature: 18/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (120) Index Estimated Time Temperature Celsius 121 2022-12-01 13:56 35 **************** ... ..( 7 skipped). .. **************** 1 2022-12-01 14:04 35 **************** 2 2022-12-01 14:05 36 ***************** ... ..( 3 skipped). .. ***************** 6 2022-12-01 14:09 36 ***************** 7 2022-12-01 14:10 35 **************** 8 2022-12-01 14:11 35 **************** 9 2022-12-01 14:12 36 ***************** 10 2022-12-01 14:13 35 **************** 11 2022-12-01 14:14 35 **************** 12 2022-12-01 14:15 36 ***************** 13 2022-12-01 14:16 35 **************** ... ..( 8 skipped). .. **************** 22 2022-12-01 14:25 35 **************** 23 2022-12-01 14:26 36 ***************** 24 2022-12-01 14:27 35 **************** 25 2022-12-01 14:28 35 **************** 26 2022-12-01 14:29 35 **************** 27 2022-12-01 14:30 36 ***************** 28 2022-12-01 14:31 35 **************** ... ..( 11 skipped). .. **************** 40 2022-12-01 14:43 35 **************** 41 2022-12-01 14:44 36 ***************** 42 2022-12-01 14:45 35 **************** 43 2022-12-01 14:46 35 **************** 44 2022-12-01 14:47 35 **************** 45 2022-12-01 14:48 36 ***************** 46 2022-12-01 14:49 35 **************** ... ..( 4 skipped). .. **************** 51 2022-12-01 14:54 35 **************** 52 2022-12-01 14:55 36 ***************** 53 2022-12-01 14:56 35 **************** 54 2022-12-01 14:57 35 **************** 55 2022-12-01 14:58 35 **************** 56 2022-12-01 14:59 36 ***************** 57 2022-12-01 15:00 35 **************** 58 2022-12-01 15:01 35 **************** 59 2022-12-01 15:02 36 ***************** 60 2022-12-01 15:03 35 **************** 61 2022-12-01 15:04 35 **************** 62 2022-12-01 15:05 35 **************** 63 2022-12-01 15:06 36 ***************** 64 2022-12-01 15:07 35 **************** 65 2022-12-01 15:08 36 ***************** ... ..( 13 skipped). .. ***************** 79 2022-12-01 15:22 36 ***************** 80 2022-12-01 15:23 35 **************** 81 2022-12-01 15:24 36 ***************** ... ..( 10 skipped). .. ***************** 92 2022-12-01 15:35 36 ***************** 93 2022-12-01 15:36 35 **************** 94 2022-12-01 15:37 36 ***************** ... ..( 2 skipped). .. ***************** 97 2022-12-01 15:40 36 ***************** 98 2022-12-01 15:41 35 **************** 99 2022-12-01 15:42 36 ***************** 100 2022-12-01 15:43 35 **************** ... ..( 4 skipped). .. **************** 105 2022-12-01 15:48 35 **************** 106 2022-12-01 15:49 36 ***************** 107 2022-12-01 15:50 35 **************** ... ..( 4 skipped). .. **************** 112 2022-12-01 15:55 35 **************** 113 2022-12-01 15:56 36 ***************** 114 2022-12-01 15:57 35 **************** ... ..( 5 skipped). .. **************** 120 2022-12-01 16:03 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5833 --- Lifetime Power-On Resets 0x01 0x010 4 38760 --- Power-on Hours 0x01 0x018 6 32551087474 --- Logical Sectors Written 0x01 0x020 6 334876353 --- Number of Write Commands 0x01 0x028 6 1142553681896 --- Logical Sectors Read 0x01 0x030 6 587089806 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 38602 --- Spindle Motor Power-on Hours 0x03 0x010 4 38602 --- Head Flying Hours 0x03 0x018 4 6350 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 42 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 32 N-- Average Long Term Temperature 0x05 0x020 1 51 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 41 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 32972 --- Number of Hardware Resets 0x06 0x010 4 8793 --- Number of ASR Events 0x06 0x018 4 4 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.15.0-53-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT04B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 1 16:03:33 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 095 095 000 - 21929 12 Power_Cycle_Count -O--CK 099 099 000 - 973 177 Wear_Leveling_Count PO--C- 096 096 000 - 46 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 047 000 - 31 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 096 096 000 - 3342 235 POR_Recovery_Count -O--C- 099 099 000 - 76 241 Total_LBAs_Written -O--CK 099 099 000 - 34032370879 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 29/40 Celsius Lifetime Min/Max Temperature: 17/53 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (41) Index Estimated Time Temperature Celsius 42 2022-11-30 18:50 32 ************* ... ..( 5 skipped). .. ************* 48 2022-11-30 19:50 32 ************* 49 2022-11-30 20:00 31 ************ ... ..( 2 skipped). .. ************ 52 2022-11-30 20:30 31 ************ 53 2022-11-30 20:40 ? - 54 2022-11-30 20:50 30 *********** 55 2022-11-30 21:00 31 ************ 56 2022-11-30 21:10 31 ************ 57 2022-11-30 21:20 ? - 58 2022-11-30 21:30 29 ********** 59 2022-11-30 21:40 30 *********** ... ..( 2 skipped). .. *********** 62 2022-11-30 22:10 30 *********** 63 2022-11-30 22:20 31 ************ 64 2022-11-30 22:30 ? - 65 2022-11-30 22:40 ? - 66 2022-11-30 22:50 30 *********** ... ..( 3 skipped). .. *********** 70 2022-11-30 23:30 30 *********** 71 2022-11-30 23:40 31 ************ 72 2022-11-30 23:50 30 *********** 73 2022-12-01 00:00 30 *********** 74 2022-12-01 00:10 31 ************ 75 2022-12-01 00:20 30 *********** ... ..( 13 skipped). .. *********** 89 2022-12-01 02:40 30 *********** 90 2022-12-01 02:50 31 ************ ... ..( 6 skipped). .. ************ 97 2022-12-01 04:00 31 ************ 98 2022-12-01 04:10 32 ************* 99 2022-12-01 04:20 32 ************* 100 2022-12-01 04:30 32 ************* 101 2022-12-01 04:40 31 ************ ... ..( 16 skipped). .. ************ 118 2022-12-01 07:30 31 ************ 119 2022-12-01 07:40 ? - 120 2022-12-01 07:50 29 ********** 121 2022-12-01 08:00 30 *********** 122 2022-12-01 08:10 31 ************ ... ..( 3 skipped). .. ************ 126 2022-12-01 08:50 31 ************ 127 2022-12-01 09:00 30 *********** 0 2022-12-01 09:10 30 *********** 1 2022-12-01 09:20 30 *********** 2 2022-12-01 09:30 31 ************ 3 2022-12-01 09:40 31 ************ 4 2022-12-01 09:50 30 *********** ... ..( 9 skipped). .. *********** 14 2022-12-01 11:30 30 *********** 15 2022-12-01 11:40 31 ************ 16 2022-12-01 11:50 31 ************ 17 2022-12-01 12:00 30 *********** ... ..( 4 skipped). .. *********** 22 2022-12-01 12:50 30 *********** 23 2022-12-01 13:00 31 ************ 24 2022-12-01 13:10 31 ************ 25 2022-12-01 13:20 31 ************ 26 2022-12-01 13:30 30 *********** ... ..( 3 skipped). .. *********** 30 2022-12-01 14:10 30 *********** 31 2022-12-01 14:20 31 ************ ... ..( 9 skipped). .. ************ 41 2022-12-01 16:00 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 973 --- Lifetime Power-On Resets 0x01 0x010 4 21929 --- Power-on Hours 0x01 0x018 6 34032370879 --- Logical Sectors Written 0x01 0x020 6 599059011 --- Number of Write Commands 0x01 0x028 6 22365211426 --- Logical Sectors Read 0x01 0x030 6 350615847 --- Number of Read Commands 0x01 0x038 6 3480000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 340 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 8369 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 3342 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub