Probe #e37dc91d33 of Gigabyte Z87X-UD3H-CF Desktop Computer (Z87X-UD3H)

Log: smartctl

/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.14.0-desktop-0.rc6.2omv2590] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Mar 23 20:30:19 2025 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 192 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 78359347 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 037 037 020 - 65535 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 245457603 9 Power_On_Hours -O--CK 058 058 000 - 37567 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 311 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 3 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 080 045 045 Past 20 (Min/Max 15/20) 194 Temperature_Celsius -O---K 020 055 000 - 20 (0 12 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 054 050 000 - 78359347 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL,SL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 19 Celsius Power Cycle Min/Max Temperature: 15/19 Celsius Lifetime Min/Max Temperature: 12/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 2 minutes Temperature Logging Interval: 94 minutes Min/Max recommended Temperature: 1/61 Celsius Min/Max Temperature Limit: 2/60 Celsius Temperature History Size (Index): 128 (80) Index Estimated Time Temperature Celsius 81 2025-03-15 13:02 29 ********** 82 2025-03-15 14:36 29 ********** 83 2025-03-15 16:10 ? - 84 2025-03-15 17:44 19 - 85 2025-03-15 19:18 19 - 86 2025-03-15 20:52 30 *********** 87 2025-03-15 22:26 ? - 88 2025-03-16 00:00 24 ***** 89 2025-03-16 01:34 ? - 90 2025-03-16 03:08 34 *************** 91 2025-03-16 04:42 ? - 92 2025-03-16 06:16 33 ************** 93 2025-03-16 07:50 ? - 94 2025-03-16 09:24 35 **************** 95 2025-03-16 10:58 ? - 96 2025-03-16 12:32 34 *************** 97 2025-03-16 14:06 34 *************** 98 2025-03-16 15:40 32 ************* 99 2025-03-16 17:14 ? - 100 2025-03-16 18:48 24 ***** 101 2025-03-16 20:22 24 ***** 102 2025-03-16 21:56 33 ************** 103 2025-03-16 23:30 34 *************** 104 2025-03-17 01:04 34 *************** 105 2025-03-17 02:38 ? - 106 2025-03-17 04:12 24 ***** 107 2025-03-17 05:46 24 ***** 108 2025-03-17 07:20 33 ************** 109 2025-03-17 08:54 34 *************** 110 2025-03-17 10:28 33 ************** 111 2025-03-17 12:02 ? - 112 2025-03-17 13:36 24 ***** 113 2025-03-17 15:10 24 ***** 114 2025-03-17 16:44 34 *************** 115 2025-03-17 18:18 34 *************** 116 2025-03-17 19:52 34 *************** 117 2025-03-17 21:26 ? - 118 2025-03-17 23:00 24 ***** 119 2025-03-18 00:34 24 ***** 120 2025-03-18 02:08 34 *************** 121 2025-03-18 03:42 34 *************** 122 2025-03-18 05:16 35 **************** 123 2025-03-18 06:50 35 **************** 124 2025-03-18 08:24 ? - 125 2025-03-18 09:58 23 **** 126 2025-03-18 11:32 23 **** 127 2025-03-18 13:06 32 ************* 0 2025-03-18 14:40 ? - 1 2025-03-18 16:14 23 **** 2 2025-03-18 17:48 23 **** 3 2025-03-18 19:22 33 ************** ... ..( 2 skipped). .. ************** 6 2025-03-19 00:04 33 ************** 7 2025-03-19 01:38 ? - 8 2025-03-19 03:12 23 **** 9 2025-03-19 04:46 23 **** 10 2025-03-19 06:20 33 ************** 11 2025-03-19 07:54 32 ************* 12 2025-03-19 09:28 33 ************** ... ..( 2 skipped). .. ************** 15 2025-03-19 14:10 33 ************** 16 2025-03-19 15:44 ? - 17 2025-03-19 17:18 23 **** 18 2025-03-19 18:52 23 **** 19 2025-03-19 20:26 33 ************** ... ..( 2 skipped). .. ************** 22 2025-03-20 01:08 33 ************** 23 2025-03-20 02:42 ? - 24 2025-03-20 04:16 25 ****** 25 2025-03-20 05:50 25 ****** 26 2025-03-20 07:24 34 *************** 27 2025-03-20 08:58 ? - 28 2025-03-20 10:32 25 ****** 29 2025-03-20 12:06 25 ****** 30 2025-03-20 13:40 36 ***************** ... ..( 3 skipped). .. ***************** 34 2025-03-20 19:56 36 ***************** 35 2025-03-20 21:30 ? - 36 2025-03-20 23:04 27 ******** 37 2025-03-21 00:38 27 ******** 38 2025-03-21 02:12 36 ***************** 39 2025-03-21 03:46 36 ***************** 40 2025-03-21 05:20 ? - 41 2025-03-21 06:54 26 ******* 42 2025-03-21 08:28 26 ******* 43 2025-03-21 10:02 ? - 44 2025-03-21 11:36 24 ***** 45 2025-03-21 13:10 24 ***** 46 2025-03-21 14:44 33 ************** 47 2025-03-21 16:18 ? - 48 2025-03-21 17:52 24 ***** 49 2025-03-21 19:26 24 ***** 50 2025-03-21 21:00 ? - 51 2025-03-21 22:34 24 ***** 52 2025-03-22 00:08 24 ***** 53 2025-03-22 01:42 33 ************** 54 2025-03-22 03:16 ? - 55 2025-03-22 04:50 19 - 56 2025-03-22 06:24 ? - 57 2025-03-22 07:58 19 - 58 2025-03-22 09:32 ? - 59 2025-03-22 11:06 17 - 60 2025-03-22 12:40 17 - 61 2025-03-22 14:14 28 ********* 62 2025-03-22 15:48 29 ********** 63 2025-03-22 17:22 29 ********** 64 2025-03-22 18:56 ? - 65 2025-03-22 20:30 19 - 66 2025-03-22 22:04 ? - 67 2025-03-22 23:38 30 *********** 68 2025-03-23 01:12 ? - 69 2025-03-23 02:46 26 ******* 70 2025-03-23 04:20 26 ******* 71 2025-03-23 05:54 30 *********** 72 2025-03-23 07:28 ? - 73 2025-03-23 09:02 15 - 74 2025-03-23 10:36 ? - 75 2025-03-23 12:10 16 - 76 2025-03-23 13:44 ? - 77 2025-03-23 15:18 16 - 78 2025-03-23 16:52 ? - 79 2025-03-23 18:26 15 - 80 2025-03-23 20:00 15 - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub