/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-45.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black (AF) Device Model: WDC WD7500BPKT-80PK4T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri May 29 09:42:43 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12300) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 41 3 Spin_Up_Time POS--K 192 168 021 - 1400 4 Start_Stop_Count -O--CK 092 092 000 - 8043 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 057 057 000 - 32064 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6799 191 G-Sense_Error_Rate -O--CK 001 001 000 - 15438 192 Power-Off_Retract_Count -O--CK 200 200 000 - 229 193 Load_Cycle_Count -O--CK 027 027 000 - 520044 194 Temperature_Celsius -O---K 114 093 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 41 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 41 [16] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 3c 00 18 00 00 00 27 12 e2 40 00 00:02:02.587 READ FPDMA QUEUED 60 00 04 00 10 00 00 03 d5 3e 70 40 00 00:02:02.579 READ FPDMA QUEUED 60 00 08 00 08 00 00 0a ce 72 f8 40 00 00:02:02.579 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:02:02.579 READ LOG EXT 61 00 08 00 f8 00 00 00 5f 0a 50 40 00 00:02:00.583 WRITE FPDMA QUEUED Error 40 [15] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: WP at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 f8 00 00 00 5f 0a 50 40 00 00:02:00.583 WRITE FPDMA QUEUED 61 00 08 00 f0 00 00 00 5f 0a 58 40 00 00:02:00.582 WRITE FPDMA QUEUED 60 00 04 00 e8 00 00 03 d5 3e 70 40 00 00:02:00.582 READ FPDMA QUEUED 60 00 08 00 e0 00 00 0a ce 72 f8 40 00 00:02:00.582 READ FPDMA QUEUED 60 00 40 00 d8 00 00 00 27 12 52 40 00 00:02:00.582 READ FPDMA QUEUED Error 39 [14] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 a8 00 00 00 27 12 52 40 00 00:01:58.590 READ FPDMA QUEUED 60 00 04 00 a0 00 00 03 d5 3e 70 40 00 00:01:58.583 READ FPDMA QUEUED 60 00 08 00 98 00 00 0a ce 72 f8 40 00 00:01:58.583 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:58.583 READ LOG EXT 60 00 04 00 88 00 00 03 d5 3e 70 40 00 00:01:56.585 READ FPDMA QUEUED Error 38 [13] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 04 00 88 00 00 03 d5 3e 70 40 00 00:01:56.585 READ FPDMA QUEUED 60 00 08 00 80 00 00 0a ce 72 f8 40 00 00:01:56.585 READ FPDMA QUEUED 60 00 40 00 78 00 00 00 27 12 92 40 00 00:01:56.585 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:01:56.585 READ LOG EXT 61 01 00 00 60 00 00 06 27 a8 58 40 00 00:01:54.579 WRITE FPDMA QUEUED Error 37 [12] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: WP at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 60 00 00 06 27 a8 58 40 00 00:01:54.579 WRITE FPDMA QUEUED 61 00 08 00 58 00 00 00 65 ce d8 40 00 00:01:54.573 WRITE FPDMA QUEUED 60 00 04 00 50 00 00 03 d5 3e 70 40 00 00:01:54.572 READ FPDMA QUEUED 61 00 08 00 48 00 00 00 5f 0a 60 40 00 00:01:54.571 WRITE FPDMA QUEUED 61 00 08 00 40 00 00 03 eb a8 d8 40 00 00:01:54.571 WRITE FPDMA QUEUED Error 36 [11] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 3c 00 f0 00 00 00 22 39 4a 40 00 00:01:52.576 READ FPDMA QUEUED 60 00 20 00 e8 00 00 00 31 57 39 40 00 00:01:52.575 READ FPDMA QUEUED 60 00 30 00 e0 00 00 00 27 f9 1b 40 00 00:01:52.571 READ FPDMA QUEUED 60 00 04 00 d8 00 00 03 d5 3e 70 40 00 00:01:52.565 READ FPDMA QUEUED 60 00 08 00 d0 00 00 0a ce 72 f8 40 00 00:01:52.565 READ FPDMA QUEUED Error 35 [10] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 20 00 a8 00 00 00 31 56 e9 40 00 00:01:50.577 READ FPDMA QUEUED 60 00 04 00 a0 00 00 03 d5 3e 70 40 00 00:01:50.559 READ FPDMA QUEUED 60 00 08 00 98 00 00 0a ce 72 f8 40 00 00:01:50.558 READ FPDMA QUEUED 60 00 18 00 90 00 00 00 27 f7 d3 40 00 00:01:50.558 READ FPDMA QUEUED 60 00 40 00 88 00 00 00 1b 4e 9a 40 00 00:01:50.558 READ FPDMA QUEUED Error 34 [9] occurred at disk power-on lifetime: 12561 hours (523 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 03 d5 3e 70 40 00 Error: UNC at LBA = 0x03d53e70 = 64306800 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 60 00 00 00 14 11 14 40 00 00:01:48.560 READ FPDMA QUEUED 60 00 40 00 58 00 00 00 1b 4e 9a 40 00 00:01:48.559 READ FPDMA QUEUED 61 00 08 00 50 00 00 00 5f 0a 48 40 00 00:01:48.554 WRITE FPDMA QUEUED 61 00 08 00 48 00 00 00 5f 0a 58 40 00 00:01:48.553 WRITE FPDMA QUEUED 60 00 04 00 40 00 00 03 d5 3e 70 40 00 00:01:48.552 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 30/33 Celsius Lifetime Min/Max Temperature: 27/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (75) Index Estimated Time Temperature Celsius 76 2020-05-29 07:35 40 ********************* ... ..( 15 skipped). .. ********************* 92 2020-05-29 07:51 40 ********************* 93 2020-05-29 07:52 41 ********************** ... ..( 84 skipped). .. ********************** 50 2020-05-29 09:17 41 ********************** 51 2020-05-29 09:18 ? - 52 2020-05-29 09:19 27 ******** 53 2020-05-29 09:20 27 ******** 54 2020-05-29 09:21 28 ********* 55 2020-05-29 09:22 28 ********* 56 2020-05-29 09:23 29 ********** 57 2020-05-29 09:24 30 *********** 58 2020-05-29 09:25 30 *********** 59 2020-05-29 09:26 31 ************ 60 2020-05-29 09:27 32 ************* 61 2020-05-29 09:28 32 ************* 62 2020-05-29 09:29 33 ************** 63 2020-05-29 09:30 33 ************** 64 2020-05-29 09:31 33 ************** 65 2020-05-29 09:32 34 *************** 66 2020-05-29 09:33 34 *************** 67 2020-05-29 09:34 35 **************** 68 2020-05-29 09:35 ? - 69 2020-05-29 09:36 30 *********** 70 2020-05-29 09:37 30 *********** 71 2020-05-29 09:38 30 *********** 72 2020-05-29 09:39 31 ************ 73 2020-05-29 09:40 31 ************ 74 2020-05-29 09:41 32 ************* 75 2020-05-29 09:42 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 410 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-45.1rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black (AF) Device Model: WDC WD7500BPKT-80PK4T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri May 29 09:42:44 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12360) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 123) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 445 3 Spin_Up_Time POS--K 193 168 021 - 1333 4 Start_Stop_Count -O--CK 077 077 000 - 23683 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 069 069 000 - 22654 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6800 191 G-Sense_Error_Rate -O--CK 001 001 000 - 3578 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 193 Load_Cycle_Count -O--CK 148 148 000 - 157468 194 Temperature_Celsius -O---K 116 093 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 8 198 Offline_Uncorrectable ----CK 200 200 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 438 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 438 [5] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 88 00 00 05 74 27 08 40 00 07:30:21.635 READ FPDMA QUEUED 60 01 00 00 80 00 00 05 74 26 08 40 00 07:30:21.635 READ FPDMA QUEUED 60 01 00 00 78 00 00 05 74 25 08 40 00 07:30:21.635 READ FPDMA QUEUED 60 00 3e 00 70 00 00 05 7e 0a 18 40 00 07:30:21.631 READ FPDMA QUEUED 60 00 08 00 68 00 00 05 88 b2 30 40 00 07:30:21.631 READ FPDMA QUEUED Error 437 [4] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 38 00 00 05 b5 9c 00 40 00 07:30:19.596 READ FPDMA QUEUED 60 00 08 00 30 00 00 05 88 b2 30 40 00 07:30:19.593 READ FPDMA QUEUED 60 00 80 00 28 00 00 05 b5 9b 80 40 00 07:30:19.585 READ FPDMA QUEUED 60 00 c8 00 20 00 00 07 e4 28 f0 40 00 07:30:19.584 READ FPDMA QUEUED 60 01 00 00 18 00 00 07 e4 27 f0 40 00 07:30:19.583 READ FPDMA QUEUED Error 436 [3] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 b8 00 00 07 e4 1e f0 40 00 07:30:17.504 READ FPDMA QUEUED 61 00 08 00 b0 00 00 00 5b 59 50 40 00 07:30:17.504 WRITE FPDMA QUEUED 60 00 08 00 a8 00 00 05 88 b2 30 40 00 07:30:17.504 READ FPDMA QUEUED 61 00 10 00 a0 00 00 00 5b 5c e0 40 00 07:30:17.504 WRITE FPDMA QUEUED 60 00 40 00 98 00 00 05 b5 9b 40 40 00 07:30:17.475 READ FPDMA QUEUED Error 435 [2] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 90 00 00 05 74 23 48 40 00 07:30:15.459 READ FPDMA QUEUED 60 00 08 00 88 00 00 05 88 b2 30 40 00 07:30:15.444 READ FPDMA QUEUED 60 00 80 00 80 00 00 07 e4 1e 70 40 00 07:30:15.444 READ FPDMA QUEUED 60 00 08 00 78 00 00 06 1f fb f8 40 00 07:30:15.444 READ FPDMA QUEUED 60 01 00 00 70 00 00 06 1f fa f8 40 00 07:30:15.444 READ FPDMA QUEUED Error 434 [1] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 3f 00 38 00 00 07 e4 29 b8 40 00 07:30:13.223 READ FPDMA QUEUED 60 00 3f 00 30 00 00 06 1f fc 00 40 00 07:30:13.222 READ FPDMA QUEUED 61 00 08 00 28 00 00 00 61 e2 68 40 00 07:30:13.221 WRITE FPDMA QUEUED 61 00 08 00 20 00 00 00 ab 0c a8 40 00 07:30:13.220 WRITE FPDMA QUEUED 60 00 70 00 18 00 00 06 60 ec c0 40 00 07:30:13.219 READ FPDMA QUEUED Error 433 [0] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 90 00 00 06 60 df c0 40 00 07:30:11.117 READ FPDMA QUEUED 60 01 00 00 88 00 00 06 60 de c0 40 00 07:30:11.105 READ FPDMA QUEUED 60 01 00 00 80 00 00 06 60 dd c0 40 00 07:30:11.104 READ FPDMA QUEUED 60 01 00 00 78 00 00 06 60 dc c0 40 00 07:30:11.104 READ FPDMA QUEUED 60 01 00 00 70 00 00 06 60 db c0 40 00 07:30:11.104 READ FPDMA QUEUED Error 432 [23] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 90 00 00 01 97 46 28 40 00 07:30:08.971 READ FPDMA QUEUED 60 01 00 00 88 00 00 01 97 45 28 40 00 07:30:08.970 READ FPDMA QUEUED 60 01 00 00 80 00 00 01 97 44 28 40 00 07:30:08.970 READ FPDMA QUEUED 60 00 08 00 78 00 00 05 88 b2 30 40 00 07:30:08.969 READ FPDMA QUEUED 60 00 40 00 70 00 00 06 60 c7 08 40 00 07:30:08.942 READ FPDMA QUEUED Error 431 [22] occurred at disk power-on lifetime: 22551 hours (939 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 05 88 b2 30 40 00 Error: UNC at LBA = 0x0588b230 = 92844592 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 58 00 00 05 8c 35 10 40 00 07:30:06.932 READ FPDMA QUEUED 60 00 3d 00 50 00 00 05 8c 3b 10 40 00 07:30:06.921 READ FPDMA QUEUED 60 00 08 00 48 00 00 05 88 b2 30 40 00 07:30:06.910 READ FPDMA QUEUED 61 00 08 00 40 00 00 00 5b 59 48 40 00 07:30:06.909 WRITE FPDMA QUEUED 60 00 40 00 38 00 00 05 8c 34 d0 40 00 07:30:06.904 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 29/31 Celsius Lifetime Min/Max Temperature: 20/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (111) Index Estimated Time Temperature Celsius 112 2020-05-29 07:35 39 ******************** 113 2020-05-29 07:36 38 ******************* ... ..( 4 skipped). .. ******************* 118 2020-05-29 07:41 38 ******************* 119 2020-05-29 07:42 37 ****************** 120 2020-05-29 07:43 38 ******************* ... ..( 9 skipped). .. ******************* 2 2020-05-29 07:53 38 ******************* 3 2020-05-29 07:54 39 ******************** 4 2020-05-29 07:55 38 ******************* 5 2020-05-29 07:56 38 ******************* 6 2020-05-29 07:57 39 ******************** 7 2020-05-29 07:58 38 ******************* 8 2020-05-29 07:59 38 ******************* 9 2020-05-29 08:00 38 ******************* 10 2020-05-29 08:01 39 ******************** 11 2020-05-29 08:02 38 ******************* 12 2020-05-29 08:03 38 ******************* 13 2020-05-29 08:04 39 ******************** 14 2020-05-29 08:05 38 ******************* 15 2020-05-29 08:06 39 ******************** 16 2020-05-29 08:07 38 ******************* 17 2020-05-29 08:08 39 ******************** 18 2020-05-29 08:09 38 ******************* 19 2020-05-29 08:10 39 ******************** 20 2020-05-29 08:11 38 ******************* 21 2020-05-29 08:12 38 ******************* 22 2020-05-29 08:13 38 ******************* 23 2020-05-29 08:14 39 ******************** ... ..( 2 skipped). .. ******************** 26 2020-05-29 08:17 39 ******************** 27 2020-05-29 08:18 38 ******************* 28 2020-05-29 08:19 38 ******************* 29 2020-05-29 08:20 39 ******************** 30 2020-05-29 08:21 39 ******************** 31 2020-05-29 08:22 38 ******************* 32 2020-05-29 08:23 39 ******************** 33 2020-05-29 08:24 39 ******************** 34 2020-05-29 08:25 38 ******************* 35 2020-05-29 08:26 38 ******************* 36 2020-05-29 08:27 39 ******************** 37 2020-05-29 08:28 39 ******************** 38 2020-05-29 08:29 38 ******************* 39 2020-05-29 08:30 39 ******************** ... ..( 2 skipped). .. ******************** 42 2020-05-29 08:33 39 ******************** 43 2020-05-29 08:34 38 ******************* 44 2020-05-29 08:35 39 ******************** 45 2020-05-29 08:36 39 ******************** 46 2020-05-29 08:37 38 ******************* 47 2020-05-29 08:38 38 ******************* 48 2020-05-29 08:39 38 ******************* 49 2020-05-29 08:40 39 ******************** 50 2020-05-29 08:41 38 ******************* 51 2020-05-29 08:42 38 ******************* 52 2020-05-29 08:43 39 ******************** 53 2020-05-29 08:44 38 ******************* 54 2020-05-29 08:45 39 ******************** 55 2020-05-29 08:46 39 ******************** 56 2020-05-29 08:47 38 ******************* 57 2020-05-29 08:48 39 ******************** 58 2020-05-29 08:49 39 ******************** 59 2020-05-29 08:50 38 ******************* 60 2020-05-29 08:51 39 ******************** ... ..( 3 skipped). .. ******************** 64 2020-05-29 08:55 39 ******************** 65 2020-05-29 08:56 38 ******************* ... ..( 3 skipped). .. ******************* 69 2020-05-29 09:00 38 ******************* 70 2020-05-29 09:01 39 ******************** ... ..( 5 skipped). .. ******************** 76 2020-05-29 09:07 39 ******************** 77 2020-05-29 09:08 38 ******************* 78 2020-05-29 09:09 38 ******************* 79 2020-05-29 09:10 38 ******************* 80 2020-05-29 09:11 39 ******************** 81 2020-05-29 09:12 39 ******************** 82 2020-05-29 09:13 39 ******************** 83 2020-05-29 09:14 38 ******************* 84 2020-05-29 09:15 39 ******************** 85 2020-05-29 09:16 39 ******************** 86 2020-05-29 09:17 39 ******************** 87 2020-05-29 09:18 ? - 88 2020-05-29 09:19 27 ******** 89 2020-05-29 09:20 27 ******** 90 2020-05-29 09:21 28 ********* 91 2020-05-29 09:22 28 ********* 92 2020-05-29 09:23 28 ********* 93 2020-05-29 09:24 29 ********** 94 2020-05-29 09:25 30 *********** 95 2020-05-29 09:26 29 ********** 96 2020-05-29 09:27 30 *********** 97 2020-05-29 09:28 30 *********** 98 2020-05-29 09:29 30 *********** 99 2020-05-29 09:30 31 ************ 100 2020-05-29 09:31 31 ************ 101 2020-05-29 09:32 31 ************ 102 2020-05-29 09:33 32 ************* 103 2020-05-29 09:34 32 ************* 104 2020-05-29 09:35 ? - 105 2020-05-29 09:36 29 ********** 106 2020-05-29 09:37 30 *********** 107 2020-05-29 09:38 29 ********** 108 2020-05-29 09:39 30 *********** 109 2020-05-29 09:40 30 *********** 110 2020-05-29 09:41 31 ************ 111 2020-05-29 09:42 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 411 Vendor specific