/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD6400BEVT-80A0RT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Feb 6 21:21:38 2020 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 185) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 187 152 021 - 1616 4 Start_Stop_Count -O--CK 001 001 000 - 184282 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12459 10 Spin_Retry_Count -O--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1105 191 G-Sense_Error_Rate -O--CK 034 034 000 - 66 192 Power-Off_Retract_Count -O--CK 200 200 000 - 40 193 Load_Cycle_Count -O--CK 001 001 000 - 2087172 194 Temperature_Celsius -O---K 120 103 000 - 27 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 955 200 Multi_Zone_Error_Rate ---R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 21/26 Celsius Lifetime Min/Max Temperature: 21/45 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (58) Index Estimated Time Temperature Celsius 59 2020-02-06 19:14 ? - 60 2020-02-06 19:15 20 * 61 2020-02-06 19:16 21 ** 62 2020-02-06 19:17 21 ** 63 2020-02-06 19:18 22 *** 64 2020-02-06 19:19 23 **** 65 2020-02-06 19:20 23 **** 66 2020-02-06 19:21 24 ***** 67 2020-02-06 19:22 24 ***** 68 2020-02-06 19:23 24 ***** 69 2020-02-06 19:24 25 ****** ... ..( 2 skipped). .. ****** 72 2020-02-06 19:27 25 ****** 73 2020-02-06 19:28 26 ******* 74 2020-02-06 19:29 26 ******* 75 2020-02-06 19:30 26 ******* 76 2020-02-06 19:31 27 ******** 77 2020-02-06 19:32 27 ******** 78 2020-02-06 19:33 27 ******** 79 2020-02-06 19:34 28 ********* ... ..( 13 skipped). .. ********* 93 2020-02-06 19:48 28 ********* 94 2020-02-06 19:49 29 ********** 95 2020-02-06 19:50 30 *********** 96 2020-02-06 19:51 29 ********** 97 2020-02-06 19:52 30 *********** ... ..( 2 skipped). .. *********** 100 2020-02-06 19:55 30 *********** 101 2020-02-06 19:56 29 ********** 102 2020-02-06 19:57 30 *********** 103 2020-02-06 19:58 30 *********** 104 2020-02-06 19:59 30 *********** 105 2020-02-06 20:00 31 ************ ... ..( 2 skipped). .. ************ 108 2020-02-06 20:03 31 ************ 109 2020-02-06 20:04 ? - 110 2020-02-06 20:05 28 ********* 111 2020-02-06 20:06 28 ********* 112 2020-02-06 20:07 29 ********** 113 2020-02-06 20:08 30 *********** 114 2020-02-06 20:09 29 ********** ... ..( 3 skipped). .. ********** 118 2020-02-06 20:13 29 ********** 119 2020-02-06 20:14 28 ********* ... ..( 14 skipped). .. ********* 6 2020-02-06 20:29 28 ********* 7 2020-02-06 20:30 27 ******** 8 2020-02-06 20:31 28 ********* 9 2020-02-06 20:32 27 ******** ... ..( 5 skipped). .. ******** 15 2020-02-06 20:38 27 ******** 16 2020-02-06 20:39 ? - 17 2020-02-06 20:40 23 **** 18 2020-02-06 20:41 24 ***** ... ..( 3 skipped). .. ***** 22 2020-02-06 20:45 24 ***** 23 2020-02-06 20:46 25 ****** 24 2020-02-06 20:47 25 ****** 25 2020-02-06 20:48 26 ******* 26 2020-02-06 20:49 25 ****** 27 2020-02-06 20:50 25 ****** 28 2020-02-06 20:51 25 ****** 29 2020-02-06 20:52 26 ******* ... ..( 9 skipped). .. ******* 39 2020-02-06 21:02 26 ******* 40 2020-02-06 21:03 27 ******** ... ..( 5 skipped). .. ******** 46 2020-02-06 21:09 27 ******** 47 2020-02-06 21:10 ? - 48 2020-02-06 21:11 22 *** 49 2020-02-06 21:12 ? - 50 2020-02-06 21:13 21 ** 51 2020-02-06 21:14 21 ** 52 2020-02-06 21:15 23 **** 53 2020-02-06 21:16 24 ***** 54 2020-02-06 21:17 25 ****** 55 2020-02-06 21:18 25 ****** 56 2020-02-06 21:19 26 ******* 57 2020-02-06 21:20 26 ******* 58 2020-02-06 21:21 26 ******* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 530 Vendor specific