/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST31000333AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SD15 User Capacity: 1 000 203 804 160 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Sep 26 22:50:04 2017 +04 ==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207951en http://knowledge.seagate.com/articles/en_US/FAQ/207957en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 617) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 201) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 166518788 3 Spin_Up_Time PO---- 094 093 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4132 5 Reallocated_Sector_Ct PO--CK 096 096 036 - 184 7 Seek_Error_Rate POSR-- 059 057 030 - 1177048593337 9 Power_On_Hours -O--CK 086 086 000 - 12350 10 Spin_Retry_Count PO--C- 100 100 097 - 16 12 Power_Cycle_Count -O--CK 097 097 020 - 3853 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 098 094 000 - 4298899519 189 High_Fly_Writes -O-RCK 001 001 000 - 255 190 Airflow_Temperature_Cel -O---K 057 043 045 Past 43 (Min/Max 38/44 #16) 194 Temperature_Celsius -O---K 043 057 000 - 43 (0 8 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 043 026 000 - 166518788 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 3 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 38/44 Celsius Lifetime Min/Max Temperature: 8/57 Celsius Under/Over Temperature Limit Count: 0/95 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (25) Index Estimated Time Temperature Celsius 26 2017-09-26 20:43 45 ************************** ... ..( 16 skipped). .. ************************** 43 2017-09-26 21:00 45 ************************** 44 2017-09-26 21:01 44 ************************* ... ..( 12 skipped). .. ************************* 57 2017-09-26 21:14 44 ************************* 58 2017-09-26 21:15 ? - 59 2017-09-26 21:16 38 ******************* 60 2017-09-26 21:17 38 ******************* 61 2017-09-26 21:18 38 ******************* 62 2017-09-26 21:19 39 ******************** ... ..( 2 skipped). .. ******************** 65 2017-09-26 21:22 39 ******************** 66 2017-09-26 21:23 40 ********************* ... ..( 4 skipped). .. ********************* 71 2017-09-26 21:28 40 ********************* 72 2017-09-26 21:29 41 ********************** ... ..( 8 skipped). .. ********************** 81 2017-09-26 21:38 41 ********************** 82 2017-09-26 21:39 42 *********************** ... ..( 11 skipped). .. *********************** 94 2017-09-26 21:51 42 *********************** 95 2017-09-26 21:52 43 ************************ ... ..( 6 skipped). .. ************************ 102 2017-09-26 21:59 43 ************************ 103 2017-09-26 22:00 44 ************************* ... ..( 18 skipped). .. ************************* 122 2017-09-26 22:19 44 ************************* 123 2017-09-26 22:20 43 ************************ ... ..( 29 skipped). .. ************************ 25 2017-09-26 22:50 43 ************************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 14 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD1600AAJS-00L7A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03E01 User Capacity: 160 041 885 696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Sep 26 22:50:04 2017 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3060) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 40) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 133 131 021 - 4341 4 Start_Stop_Count -O--CK 096 096 000 - 4662 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 088 088 000 - 8880 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3756 192 Power-Off_Retract_Count -O--CK 200 200 000 - 276 193 Load_Cycle_Count -O--CK 199 199 000 - 4662 194 Temperature_Celsius -O---K 101 088 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 35/42 Celsius Lifetime Min/Max Temperature: 35/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (367) Index Estimated Time Temperature Celsius 368 2017-09-26 14:53 42 *********************** ... ..( 3 skipped). .. *********************** 372 2017-09-26 14:57 42 *********************** 373 2017-09-26 14:58 43 ************************ ... ..( 95 skipped). .. ************************ 469 2017-09-26 16:34 43 ************************ 470 2017-09-26 16:35 44 ************************* ... ..( 34 skipped). .. ************************* 27 2017-09-26 17:10 44 ************************* 28 2017-09-26 17:11 43 ************************ ... ..(110 skipped). .. ************************ 139 2017-09-26 19:02 43 ************************ 140 2017-09-26 19:03 44 ************************* ... ..( 50 skipped). .. ************************* 191 2017-09-26 19:54 44 ************************* 192 2017-09-26 19:55 43 ************************ ... ..( 5 skipped). .. ************************ 198 2017-09-26 20:01 43 ************************ 199 2017-09-26 20:02 ? - 200 2017-09-26 20:03 35 **************** ... ..( 3 skipped). .. **************** 204 2017-09-26 20:07 35 **************** 205 2017-09-26 20:08 36 ***************** 206 2017-09-26 20:09 36 ***************** 207 2017-09-26 20:10 37 ****************** ... ..( 3 skipped). .. ****************** 211 2017-09-26 20:14 37 ****************** 212 2017-09-26 20:15 38 ******************* 213 2017-09-26 20:16 38 ******************* 214 2017-09-26 20:17 38 ******************* 215 2017-09-26 20:18 39 ******************** ... ..( 3 skipped). .. ******************** 219 2017-09-26 20:22 39 ******************** 220 2017-09-26 20:23 40 ********************* ... ..( 4 skipped). .. ********************* 225 2017-09-26 20:28 40 ********************* 226 2017-09-26 20:29 41 ********************** ... ..( 8 skipped). .. ********************** 235 2017-09-26 20:38 41 ********************** 236 2017-09-26 20:39 42 *********************** ... ..( 53 skipped). .. *********************** 290 2017-09-26 21:33 42 *********************** 291 2017-09-26 21:34 40 ********************* ... ..( 26 skipped). .. ********************* 318 2017-09-26 22:01 40 ********************* 319 2017-09-26 22:02 41 ********************** ... ..( 20 skipped). .. ********************** 340 2017-09-26 22:23 41 ********************** 341 2017-09-26 22:24 42 *********************** ... ..( 25 skipped). .. *********************** 367 2017-09-26 22:50 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x8000 4 5667 Vendor specific