Probe #e98500c1f4 of ASRock A320M-HD Desktop Computer

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.61-RAVEN] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..76GSX Device Model: TOSHIBA MK6476GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: GS001C User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Sep 2 19:22:18 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 165) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 2 Throughput_Performance POS--K 100 100 050 - 0 3 Spin_Up_Time PO---K 100 100 002 - 2163 4 Start_Stop_Count -O--CK 100 100 000 - 7227 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-K 100 100 050 - 0 8 Seek_Time_Performance P-S--K 100 100 050 - 0 9 Power_On_Minutes -O--CK 037 037 000 - 423h+24m 10 Spin_Retry_Count PO--CK 243 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 6938 183 Runtime_Bad_Block -O--CK 100 100 001 - 1 184 End-to-End_Error PO--CK 100 100 097 - 0 185 Unknown_Attribute -O--CK 100 100 001 - 65535 187 Reported_Uncorrect -O--CK 001 001 000 - 2902 188 Command_Timeout -O--CK 100 096 000 - 319 189 High_Fly_Writes -O-RCK 100 100 001 - 0 190 Airflow_Temperature_Cel -O---K 068 047 040 - 32 (Min/Max 31/34) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 46733 192 Power-Off_Retract_Count -O---K 100 100 000 - 4980812 193 Load_Cycle_Count -O--CK 045 045 000 - 559142 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 2907 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2907 [90] occurred at disk power-on lifetime: 24036 hours (1001 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 01 30 34 37 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x01303437 = 19936311 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 01 30 33 b8 e0 00 11:59:30.649 WRITE DMA EXT 35 00 00 00 80 00 00 01 30 33 38 e0 00 11:59:30.646 WRITE DMA EXT 35 00 00 00 80 00 00 01 30 32 b8 e0 00 11:59:30.646 WRITE DMA EXT 35 00 00 00 80 00 00 01 30 32 38 e0 00 11:59:30.645 WRITE DMA EXT 35 00 00 00 80 00 00 01 30 31 b8 e0 00 11:59:30.645 WRITE DMA EXT Error 2906 [89] occurred at disk power-on lifetime: 21570 hours (898 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 10 00 00 31 54 2f 77 61 00 Error: ICRC, ABRT at LBA = 0x31542f77 = 827600759 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 05 40 00 00 00 00 31 55 08 00 40 08 08:48:13.864 WRITE FPDMA QUEUED 61 02 c0 00 f0 00 00 31 55 05 40 40 08 08:48:13.853 WRITE FPDMA QUEUED 61 05 40 00 e8 00 00 31 55 00 00 40 08 08:48:13.853 WRITE FPDMA QUEUED 61 02 c0 00 e0 00 00 31 54 fd 40 40 08 08:48:13.853 WRITE FPDMA QUEUED 61 05 40 00 d8 00 00 31 54 f8 00 40 08 08:48:13.853 WRITE FPDMA QUEUED Error 2905 [88] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 d2 00 00 2f 47 14 f6 6f 00 Error: UNC at LBA = 0x2f4714f6 = 793187574 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 e8 00 00 2f 47 17 c8 40 00 03:15:59.415 READ FPDMA QUEUED 60 01 00 00 e0 00 00 2f 47 16 c8 40 00 03:15:59.415 READ FPDMA QUEUED 60 01 00 00 d8 00 00 2f 47 15 c8 40 00 03:15:59.415 READ FPDMA QUEUED 60 01 00 00 d0 00 00 2f 47 14 c8 40 00 03:15:59.415 READ FPDMA QUEUED 60 00 18 00 c8 00 00 2f 47 1b a0 40 00 03:15:59.390 READ FPDMA QUEUED Error 2904 [87] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 c2 00 00 2f 47 1a bb 6f 00 Error: UNC at LBA = 0x2f471abb = 793189051 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 18 00 c8 00 00 2f 47 1b a0 40 00 03:15:55.390 READ FPDMA QUEUED 60 01 00 00 c0 00 00 2f 47 1a a0 40 00 03:15:55.390 READ FPDMA QUEUED 60 01 00 00 b8 00 00 2f 47 19 a0 40 00 03:15:55.390 READ FPDMA QUEUED 61 01 00 00 b0 00 00 13 5e 2c e8 40 00 03:15:55.375 WRITE FPDMA QUEUED 61 01 00 00 a8 00 00 13 5e 2b e8 40 00 03:15:55.375 WRITE FPDMA QUEUED Error 2903 [86] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 ca 00 00 2f 4d 2f 59 6f 00 Error: UNC at LBA = 0x2f4d2f59 = 793587545 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 d0 00 00 2f 4d 2f 98 40 00 03:15:39.923 READ FPDMA QUEUED 60 01 00 00 c8 00 00 2f 4d 2e 98 40 00 03:15:39.923 READ FPDMA QUEUED 60 01 00 00 c0 00 00 2f 4d 2d 98 40 00 03:15:39.923 READ FPDMA QUEUED 60 01 00 00 b8 00 00 2f 4d 2c 98 40 00 03:15:39.923 READ FPDMA QUEUED 60 01 00 00 b0 00 00 2f 4d 2b 98 40 00 03:15:39.923 READ FPDMA QUEUED Error 2902 [85] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 9a 00 00 2f 4d 29 94 6f 00 Error: UNC at LBA = 0x2f4d2994 = 793586068 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 d0 00 00 2f 4d 2f 98 40 00 03:15:35.930 READ FPDMA QUEUED 60 01 00 00 c8 00 00 2f 4d 2e 98 40 00 03:15:35.930 READ FPDMA QUEUED 60 01 00 00 c0 00 00 2f 4d 2d 98 40 00 03:15:35.930 READ FPDMA QUEUED 60 01 00 00 b8 00 00 2f 4d 2c 98 40 00 03:15:35.930 READ FPDMA QUEUED 60 01 00 00 b0 00 00 2f 4d 2b 98 40 00 03:15:35.930 READ FPDMA QUEUED Error 2901 [84] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 7a 00 00 2f 47 14 f6 6f 00 Error: UNC at LBA = 0x2f4714f6 = 793187574 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 90 00 00 2f 47 17 c8 40 00 03:15:31.867 READ FPDMA QUEUED 60 01 00 00 88 00 00 2f 47 16 c8 40 00 03:15:31.867 READ FPDMA QUEUED 60 01 00 00 80 00 00 2f 47 15 c8 40 00 03:15:31.867 READ FPDMA QUEUED 60 01 00 00 78 00 00 2f 47 14 c8 40 00 03:15:31.867 READ FPDMA QUEUED 61 01 00 00 70 00 00 14 4a 1d 60 40 00 03:15:31.860 WRITE FPDMA QUEUED Error 2900 [83] occurred at disk power-on lifetime: 18556 hours (773 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 5a 00 00 2f 47 14 f6 6f 00 Error: UNC at LBA = 0x2f4714f6 = 793187574 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 30 00 70 00 00 2f 47 17 c8 40 00 03:15:27.648 READ FPDMA QUEUED 60 01 00 00 68 00 00 2f 47 16 c8 40 00 03:15:27.648 READ FPDMA QUEUED 60 01 00 00 60 00 00 2f 47 15 c8 40 00 03:15:27.647 READ FPDMA QUEUED 60 01 00 00 58 00 00 2f 47 14 c8 40 00 03:15:27.647 READ FPDMA QUEUED 60 00 18 00 50 00 00 2f 47 1b a0 40 00 03:15:27.623 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 90% 17765 793659133 # 2 Short offline Completed: read failure 90% 17757 793659133 # 3 Short offline Completed: read failure 90% 17745 793659133 # 4 Short offline Completed: read failure 90% 17730 793659133 # 5 Short offline Completed: read failure 90% 17721 793659133 # 6 Extended offline Completed: read failure 90% 17711 793659133 # 7 Short offline Completed: read failure 90% 17682 793659133 # 8 Short offline Completed: read failure 90% 17653 793659133 # 9 Short offline Completed: read failure 90% 17637 793659133 #10 Short offline Completed: read failure 90% 17631 793659133 #11 Short offline Completed: read failure 90% 17588 793659133 #12 Short offline Completed: read failure 90% 17574 793190527 #13 Short offline Completed: read failure 90% 17554 793190527 #14 Short offline Completed: read failure 90% 17541 793190527 #15 Short offline Completed: read failure 90% 17532 793190527 #16 Short offline Completed: read failure 90% 17521 793190527 #17 Short offline Completed: read failure 90% 17463 793190527 #18 Short offline Completed: read failure 90% 17450 793190527 #19 Short offline Completed: read failure 90% 17423 793190527 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 31/34 Celsius Lifetime Min/Max Temperature: 14/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (6) Index Estimated Time Temperature Celsius 7 2020-09-02 11:25 30 *********** ... ..( 32 skipped). .. *********** 40 2020-09-02 11:58 30 *********** 41 2020-09-02 11:59 31 ************ ... ..( 7 skipped). .. ************ 49 2020-09-02 12:07 31 ************ 50 2020-09-02 12:08 30 *********** ... ..( 11 skipped). .. *********** 62 2020-09-02 12:20 30 *********** 63 2020-09-02 12:21 31 ************ ... ..( 46 skipped). .. ************ 110 2020-09-02 13:08 31 ************ 111 2020-09-02 13:09 32 ************* ... ..( 2 skipped). .. ************* 114 2020-09-02 13:12 32 ************* 115 2020-09-02 13:13 33 ************** 116 2020-09-02 13:14 33 ************** 117 2020-09-02 13:15 34 *************** ... ..( 7 skipped). .. *************** 125 2020-09-02 13:23 34 *************** 126 2020-09-02 13:24 35 **************** ... ..( 3 skipped). .. **************** 130 2020-09-02 13:28 35 **************** 131 2020-09-02 13:29 36 ***************** ... ..( 68 skipped). .. ***************** 200 2020-09-02 14:38 36 ***************** 201 2020-09-02 14:39 37 ****************** 202 2020-09-02 14:40 36 ***************** ... ..( 2 skipped). .. ***************** 205 2020-09-02 14:43 36 ***************** 206 2020-09-02 14:44 35 **************** ... ..( 4 skipped). .. **************** 211 2020-09-02 14:49 35 **************** 212 2020-09-02 14:50 36 ***************** ... ..( 9 skipped). .. ***************** 222 2020-09-02 15:00 36 ***************** 223 2020-09-02 15:01 35 **************** 224 2020-09-02 15:02 34 *************** 225 2020-09-02 15:03 34 *************** 226 2020-09-02 15:04 34 *************** 227 2020-09-02 15:05 33 ************** 228 2020-09-02 15:06 33 ************** 229 2020-09-02 15:07 32 ************* ... ..( 6 skipped). .. ************* 236 2020-09-02 15:14 32 ************* 237 2020-09-02 15:15 33 ************** 238 2020-09-02 15:16 34 *************** ... ..( 3 skipped). .. *************** 242 2020-09-02 15:20 34 *************** 243 2020-09-02 15:21 33 ************** 244 2020-09-02 15:22 34 *************** 245 2020-09-02 15:23 34 *************** 246 2020-09-02 15:24 34 *************** 247 2020-09-02 15:25 33 ************** 248 2020-09-02 15:26 33 ************** 249 2020-09-02 15:27 33 ************** 250 2020-09-02 15:28 32 ************* ... ..( 7 skipped). .. ************* 258 2020-09-02 15:36 32 ************* 259 2020-09-02 15:37 31 ************ ... ..( 2 skipped). .. ************ 262 2020-09-02 15:40 31 ************ 263 2020-09-02 15:41 32 ************* ... ..( 15 skipped). .. ************* 279 2020-09-02 15:57 32 ************* 280 2020-09-02 15:58 33 ************** 281 2020-09-02 15:59 33 ************** 282 2020-09-02 16:00 33 ************** 283 2020-09-02 16:01 34 *************** ... ..( 5 skipped). .. *************** 289 2020-09-02 16:07 34 *************** 290 2020-09-02 16:08 35 **************** 291 2020-09-02 16:09 34 *************** ... ..( 2 skipped). .. *************** 294 2020-09-02 16:12 34 *************** 295 2020-09-02 16:13 33 ************** 296 2020-09-02 16:14 33 ************** 297 2020-09-02 16:15 32 ************* 298 2020-09-02 16:16 33 ************** 299 2020-09-02 16:17 32 ************* ... ..( 39 skipped). .. ************* 339 2020-09-02 16:57 32 ************* 340 2020-09-02 16:58 ? - 341 2020-09-02 16:59 33 ************** 342 2020-09-02 17:00 34 *************** 343 2020-09-02 17:01 34 *************** 344 2020-09-02 17:02 34 *************** 345 2020-09-02 17:03 33 ************** ... ..( 5 skipped). .. ************** 351 2020-09-02 17:09 33 ************** 352 2020-09-02 17:10 32 ************* ... ..( 90 skipped). .. ************* 443 2020-09-02 18:41 32 ************* 444 2020-09-02 18:42 31 ************ 445 2020-09-02 18:43 31 ************ 446 2020-09-02 18:44 32 ************* 447 2020-09-02 18:45 32 ************* 448 2020-09-02 18:46 31 ************ 449 2020-09-02 18:47 32 ************* 450 2020-09-02 18:48 31 ************ ... ..( 21 skipped). .. ************ 472 2020-09-02 19:10 31 ************ 473 2020-09-02 19:11 32 ************* 474 2020-09-02 19:12 31 ************ ... ..( 9 skipped). .. ************ 6 2020-09-02 19:22 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 4 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub