/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: GIGABYTE GP-GSTFS31120GNTD Serial Number: -- Firmware Version: SBFM61.3 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Sep 26 23:18:44 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 2552 12 Power_Cycle_Count -O--C- 100 100 000 - 896 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 170 Bad_Blk_Ct_Erl/Lat PO---- 100 100 000 - 0/50 173 MaxAvgErase_Ct -O--C- 100 100 000 - 100 (Average 76) 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 193 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 CRC_Error_Count PO-R-- 100 100 050 - 0 231 SSD_Life_Left PO--C- 100 100 000 - 97 241 Lifetime_Writes_GiB -O--C- 100 100 000 - 7060 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 896 --- Lifetime Power-On Resets 0x01 0x010 4 2552 --- Power-on Hours 0x01 0x018 6 14806291681 --- Logical Sectors Written 0x01 0x028 6 17222772773 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7157 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 41 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 42 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.B Device Model: Hitachi HDT721010SLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA3AA User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Sep 26 23:18:44 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 132 132 054 - 112 3 Spin_Up_Time POS--- 141 141 024 - 314 (Average 497) 4 Start_Stop_Count -O--C- 099 099 000 - 5315 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 2 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 125 125 020 - 33 9 Power_On_Hours -O--C- 099 099 000 - 13092 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3979 192 Power-Off_Retract_Count -O--CK 096 096 000 - 5348 193 Load_Cycle_Count -O--C- 096 096 000 - 5348 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 18/56) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 103 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 21 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 21 [0] occurred at disk power-on lifetime: 12385 hours (516 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 00 0f 66 74 41 ef 00 Error: UNC 7 sectors at LBA = 0x0f667441 = 258372673 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0f 66 74 40 e0 00 00:00:23.500 READ DMA EXT 25 00 00 00 08 00 00 0f 66 74 40 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 10 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 18 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 08 e0 00 00:00:18.900 READ DMA EXT Error 20 [3] occurred at disk power-on lifetime: 12385 hours (516 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 00 0f 66 74 41 ef 00 Error: UNC 7 sectors at LBA = 0x0f667441 = 258372673 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 0f 66 74 40 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 10 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 18 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 08 e0 00 00:00:18.900 READ DMA EXT 25 00 00 00 08 00 00 0f 66 72 00 e0 00 00:00:18.900 READ DMA EXT Error 19 [2] occurred at disk power-on lifetime: 10527 hours (438 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 2d 00 00 64 fd 87 d3 e4 00 Error: UNC 45 sectors at LBA = 0x64fd87d3 = 1694336979 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 64 fd 87 00 e0 00 00:18:07.200 READ DMA EXT 25 00 00 00 08 00 00 64 fd 87 f8 e0 00 00:18:07.200 READ DMA EXT 25 00 00 01 00 00 00 64 fd 87 00 e0 00 00:18:02.900 READ DMA EXT 25 00 00 01 00 00 00 64 8b 58 00 e0 00 00:18:02.900 READ DMA EXT 25 00 00 01 00 00 00 64 02 63 00 e0 00 00:18:02.800 READ DMA EXT Error 18 [1] occurred at disk power-on lifetime: 10527 hours (438 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 2d 00 00 64 fd 87 d3 e4 00 Error: UNC 45 sectors at LBA = 0x64fd87d3 = 1694336979 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 64 fd 87 00 e0 00 00:18:02.900 READ DMA EXT 25 00 00 01 00 00 00 64 8b 58 00 e0 00 00:18:02.900 READ DMA EXT 25 00 00 01 00 00 00 64 02 63 00 e0 00 00:18:02.800 READ DMA EXT 25 00 00 01 00 00 00 64 fe 96 00 e0 00 00:18:02.800 READ DMA EXT 25 00 00 01 00 00 00 64 ff 62 00 e0 00 00:18:02.800 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 33/37 Celsius Lifetime Min/Max Temperature: 18/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (82) Index Estimated Time Temperature Celsius 83 2022-09-26 21:11 36 ***************** 84 2022-09-26 21:12 37 ****************** 85 2022-09-26 21:13 37 ****************** 86 2022-09-26 21:14 36 ***************** 87 2022-09-26 21:15 36 ***************** 88 2022-09-26 21:16 37 ****************** 89 2022-09-26 21:17 36 ***************** 90 2022-09-26 21:18 36 ***************** 91 2022-09-26 21:19 36 ***************** 92 2022-09-26 21:20 37 ****************** ... ..( 5 skipped). .. ****************** 98 2022-09-26 21:26 37 ****************** 99 2022-09-26 21:27 36 ***************** 100 2022-09-26 21:28 37 ****************** 101 2022-09-26 21:29 36 ***************** 102 2022-09-26 21:30 36 ***************** 103 2022-09-26 21:31 37 ****************** 104 2022-09-26 21:32 36 ***************** 105 2022-09-26 21:33 36 ***************** 106 2022-09-26 21:34 37 ****************** 107 2022-09-26 21:35 36 ***************** ... ..( 2 skipped). .. ***************** 110 2022-09-26 21:38 36 ***************** 111 2022-09-26 21:39 37 ****************** ... ..( 12 skipped). .. ****************** 124 2022-09-26 21:52 37 ****************** 125 2022-09-26 21:53 36 ***************** 126 2022-09-26 21:54 36 ***************** 127 2022-09-26 21:55 37 ****************** 0 2022-09-26 21:56 36 ***************** 1 2022-09-26 21:57 36 ***************** 2 2022-09-26 21:58 37 ****************** ... ..( 6 skipped). .. ****************** 9 2022-09-26 22:05 37 ****************** 10 2022-09-26 22:06 36 ***************** 11 2022-09-26 22:07 37 ****************** 12 2022-09-26 22:08 36 ***************** 13 2022-09-26 22:09 36 ***************** 14 2022-09-26 22:10 37 ****************** 15 2022-09-26 22:11 36 ***************** ... ..( 3 skipped). .. ***************** 19 2022-09-26 22:15 36 ***************** 20 2022-09-26 22:16 37 ****************** 21 2022-09-26 22:17 36 ***************** 22 2022-09-26 22:18 36 ***************** 23 2022-09-26 22:19 37 ****************** 24 2022-09-26 22:20 36 ***************** ... ..( 3 skipped). .. ***************** 28 2022-09-26 22:24 36 ***************** 29 2022-09-26 22:25 37 ****************** 30 2022-09-26 22:26 36 ***************** ... ..( 8 skipped). .. ***************** 39 2022-09-26 22:35 36 ***************** 40 2022-09-26 22:36 37 ****************** 41 2022-09-26 22:37 37 ****************** 42 2022-09-26 22:38 36 ***************** 43 2022-09-26 22:39 36 ***************** 44 2022-09-26 22:40 37 ****************** 45 2022-09-26 22:41 36 ***************** 46 2022-09-26 22:42 36 ***************** 47 2022-09-26 22:43 37 ****************** 48 2022-09-26 22:44 36 ***************** 49 2022-09-26 22:45 36 ***************** 50 2022-09-26 22:46 37 ****************** 51 2022-09-26 22:47 36 ***************** ... ..( 4 skipped). .. ***************** 56 2022-09-26 22:52 36 ***************** 57 2022-09-26 22:53 37 ****************** ... ..( 2 skipped). .. ****************** 60 2022-09-26 22:56 37 ****************** 61 2022-09-26 22:57 36 ***************** 62 2022-09-26 22:58 37 ****************** 63 2022-09-26 22:59 37 ****************** 64 2022-09-26 23:00 36 ***************** 65 2022-09-26 23:01 37 ****************** 66 2022-09-26 23:02 36 ***************** 67 2022-09-26 23:03 36 ***************** 68 2022-09-26 23:04 37 ****************** 69 2022-09-26 23:05 36 ***************** 70 2022-09-26 23:06 36 ***************** 71 2022-09-26 23:07 37 ****************** 72 2022-09-26 23:08 36 ***************** 73 2022-09-26 23:09 36 ***************** 74 2022-09-26 23:10 36 ***************** 75 2022-09-26 23:11 37 ****************** 76 2022-09-26 23:12 37 ****************** 77 2022-09-26 23:13 37 ****************** 78 2022-09-26 23:14 36 ***************** 79 2022-09-26 23:15 37 ****************** 80 2022-09-26 23:16 37 ****************** 81 2022-09-26 23:17 37 ****************** 82 2022-09-26 23:18 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 40 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 40 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD800JD-22LSA0 Serial Number: -- Firmware Version: 06.01D06 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Mon Sep 26 23:18:45 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 33) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 143 3 Spin_Up_Time PO---- 164 154 021 - 2800 4 Start_Stop_Count -O--CK 096 096 000 - 4076 5 Reallocated_Sector_Ct PO--CK 199 199 140 - 3 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 085 085 000 - 11145 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3870 190 Airflow_Temperature_Cel -O---K 070 054 045 - 30 194 Temperature_Celsius -O---K 113 097 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 8860 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 402 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 402 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 00 00 0d 00 53 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 8c b0 6b 37 00 00 00 00 00 01 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 d5 00 e0 6b 8c 00 37 b0 00 01 00 00:00:57.345 NOP [Reserved subcommand] [OBS-ACS-2] 00 83 ec 6b 37 00 01 00 00 00 01 00 00 06:36:43.780 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 00 6b 9f 00 32 ec 00 01 00 00:00:00.001 NOP [Abort queued commands] Error 401 [16] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e1 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 cc c8 3f d2 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 a7 3f cc 01 d2 c8 00 00 00 00:00:43.009 NOP [Abort queued commands] 01 cb c8 3f d2 00 01 00 a6 00 00 00 01 01:09:42.732 [RESERVED] 00 01 00 00 a4 3f cb 01 d2 c8 00 00 00 00:00:42.241 NOP [Abort queued commands] Error 400 [15] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e1 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 20 c8 3f c7 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 30 3f 1e 01 c7 c8 00 00 00 00:00:12.288 NOP [Abort queued commands] 01 1a c8 3f c7 00 00 00 30 00 00 00 01 01:09:39.740 [RESERVED] 00 00 00 00 30 3f 17 01 c7 c8 00 00 00 00:00:12.288 NOP [Abort queued commands] Error 399 [14] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 6a c8 3c 99 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 45 3c 69 00 99 c8 00 00 00 00:00:17.921 NOP [Abort queued commands] 00 69 c8 3c 99 00 01 00 44 00 00 00 00 01:06:11.433 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 42 3c 67 00 99 c8 00 00 00 00:00:17.153 NOP [Abort queued commands] Error 398 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 a3 c8 3c 91 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 42 3c a2 00 91 c8 00 00 00 00:00:16.896 NOP [Abort queued commands] 00 9f c8 3c 91 00 00 00 42 00 00 00 00 01:06:09.441 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 42 3c 95 00 91 c8 00 00 00 00:00:16.896 NOP [Abort queued commands] Error 397 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 01 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 fb c8 3c 88 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 40 3c fb 00 88 c8 00 00 00 00:00:16.641 NOP [Abort queued commands] 00 fa c8 3c 88 00 01 00 3f 00 00 00 00 01:06:07.226 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 3d 3c fa 00 88 c8 00 00 00 00:00:15.873 NOP [Abort queued commands] Error 396 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 43 c8 3c 81 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 00 3c 40 00 81 c8 00 00 00 00:00:00.000 NOP [Abort queued commands] 00 3d c8 3c 81 00 00 00 00 00 00 00 00 01:06:05.246 NOP [Reserved subcommand] [OBS-ACS-2] 00 00 00 00 00 3c 3b 00 81 c8 00 00 00 00:00:00.000 NOP [Abort queued commands] Error 395 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 4b c8 39 e6 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 e9 39 4b 00 e6 c8 00 00 00 00:00:59.905 NOP [Abort queued commands] 00 4a c8 39 e6 00 01 00 e8 00 00 00 00 01:03:14.506 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 00 00 e6 39 4a 00 e6 c8 00 00 00 00:00:59.137 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: --/34 Celsius Lifetime Min/Max Temperature: --/46 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/60 Celsius Temperature History Size (Index): 128 (71) Index Estimated Time Temperature Celsius 72 2022-09-26 21:11 27 ******** ... ..( 10 skipped). .. ******** 83 2022-09-26 21:22 27 ******** 84 2022-09-26 21:23 26 ******* ... ..( 4 skipped). .. ******* 89 2022-09-26 21:28 26 ******* 90 2022-09-26 21:29 27 ******** ... ..( 11 skipped). .. ******** 102 2022-09-26 21:41 27 ******** 103 2022-09-26 21:42 26 ******* 104 2022-09-26 21:43 26 ******* 105 2022-09-26 21:44 26 ******* 106 2022-09-26 21:45 27 ******** 107 2022-09-26 21:46 26 ******* 108 2022-09-26 21:47 25 ****** 109 2022-09-26 21:48 25 ****** 110 2022-09-26 21:49 26 ******* 111 2022-09-26 21:50 27 ******** ... ..( 11 skipped). .. ******** 123 2022-09-26 22:02 27 ******** 124 2022-09-26 22:03 26 ******* 125 2022-09-26 22:04 25 ****** 126 2022-09-26 22:05 25 ****** 127 2022-09-26 22:06 26 ******* 0 2022-09-26 22:07 27 ******** ... ..( 19 skipped). .. ******** 20 2022-09-26 22:27 27 ******** 21 2022-09-26 22:28 28 ********* 22 2022-09-26 22:29 28 ********* 23 2022-09-26 22:30 27 ******** ... ..( 5 skipped). .. ******** 29 2022-09-26 22:36 27 ******** 30 2022-09-26 22:37 26 ******* 31 2022-09-26 22:38 26 ******* 32 2022-09-26 22:39 26 ******* 33 2022-09-26 22:40 27 ******** ... ..( 12 skipped). .. ******** 46 2022-09-26 22:53 27 ******** 47 2022-09-26 22:54 26 ******* 48 2022-09-26 22:55 26 ******* 49 2022-09-26 22:56 25 ****** 50 2022-09-26 22:57 26 ******* 51 2022-09-26 22:58 26 ******* 52 2022-09-26 22:59 27 ******** 53 2022-09-26 23:00 27 ******** 54 2022-09-26 23:01 27 ******** 55 2022-09-26 23:02 28 ********* 56 2022-09-26 23:03 28 ********* 57 2022-09-26 23:04 27 ******** ... ..( 8 skipped). .. ******** 66 2022-09-26 23:13 27 ******** 67 2022-09-26 23:14 30 *********** 68 2022-09-26 23:15 31 ************ 69 2022-09-26 23:16 32 ************* 70 2022-09-26 23:17 28 ********* 71 2022-09-26 23:18 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 40 Device-to-host register FISes sent due to a COMRESET 0x8000 4 23803 Vendor specific