/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.7-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 PRO 512GB Serial Number: -- Firmware Version: 1B2QEXP7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 85,330,563,072 [85.3 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Sep 7 16:30:31 2020 MSK Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 81 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.20W - - 0 0 0 0 0 0 1 + 4.30W - - 1 1 1 1 0 0 2 + 2.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 38 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 9,955,961 [5.09 TB] Data Units Written: 17,314,255 [8.86 TB] Host Read Commands: 143,197,757 Host Write Commands: 134,886,964 Controller Busy Time: 592 Power Cycles: 681 Power On Hours: 3,342 Unsafe Shutdowns: 50 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,509 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 38 Celsius Temperature Sensor 2: 45 Celsius Error Information (NVMe Log 0x01, max 64 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.7-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 7 16:30:31 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 5889 12 Power_Cycle_Count -O--CK 099 099 000 - 681 177 Wear_Leveling_Count PO--C- 099 099 000 - 5 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 048 000 - 31 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 513 241 Total_LBAs_Written -O--CK 099 099 000 - 8356504243 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 31/36 Celsius Lifetime Min/Max Temperature: 22/52 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2020-09-06 19:20 ? - ... ..( 10 skipped). .. - 89 2020-09-06 21:10 ? - 90 2020-09-06 21:20 28 ********* 91 2020-09-06 21:30 ? - 92 2020-09-06 21:40 29 ********** 93 2020-09-06 21:50 28 ********* 94 2020-09-06 22:00 28 ********* 95 2020-09-06 22:10 ? - ... ..( 29 skipped). .. - 125 2020-09-07 03:10 ? - 126 2020-09-07 03:20 32 ************* 127 2020-09-07 03:30 38 ******************* 0 2020-09-07 03:40 39 ******************** 1 2020-09-07 03:50 40 ********************* 2 2020-09-07 04:00 41 ********************** 3 2020-09-07 04:10 41 ********************** 4 2020-09-07 04:20 35 **************** 5 2020-09-07 04:30 34 *************** 6 2020-09-07 04:40 31 ************ 7 2020-09-07 04:50 31 ************ 8 2020-09-07 05:00 33 ************** ... ..( 3 skipped). .. ************** 12 2020-09-07 05:40 33 ************** 13 2020-09-07 05:50 35 **************** 14 2020-09-07 06:00 33 ************** 15 2020-09-07 06:10 32 ************* 16 2020-09-07 06:20 32 ************* 17 2020-09-07 06:30 32 ************* 18 2020-09-07 06:40 33 ************** 19 2020-09-07 06:50 33 ************** 20 2020-09-07 07:00 31 ************ 21 2020-09-07 07:10 30 *********** 22 2020-09-07 07:20 29 ********** ... ..( 2 skipped). .. ********** 25 2020-09-07 07:50 29 ********** 26 2020-09-07 08:00 28 ********* ... ..( 2 skipped). .. ********* 29 2020-09-07 08:30 28 ********* 30 2020-09-07 08:40 27 ******** 31 2020-09-07 08:50 28 ********* 32 2020-09-07 09:00 29 ********** ... ..( 2 skipped). .. ********** 35 2020-09-07 09:30 29 ********** 36 2020-09-07 09:40 28 ********* 37 2020-09-07 09:50 28 ********* 38 2020-09-07 10:00 28 ********* 39 2020-09-07 10:10 29 ********** 40 2020-09-07 10:20 29 ********** 41 2020-09-07 10:30 28 ********* ... ..( 9 skipped). .. ********* 51 2020-09-07 12:10 28 ********* 52 2020-09-07 12:20 27 ******** 53 2020-09-07 12:30 27 ******** 54 2020-09-07 12:40 28 ********* 55 2020-09-07 12:50 28 ********* 56 2020-09-07 13:00 28 ********* 57 2020-09-07 13:10 27 ******** ... ..( 3 skipped). .. ******** 61 2020-09-07 13:50 27 ******** 62 2020-09-07 14:00 ? - 63 2020-09-07 14:10 24 ***** 64 2020-09-07 14:20 25 ****** 65 2020-09-07 14:30 26 ******* 66 2020-09-07 14:40 27 ******** 67 2020-09-07 14:50 27 ******** 68 2020-09-07 15:00 27 ******** 69 2020-09-07 15:10 28 ********* 70 2020-09-07 15:20 29 ********** 71 2020-09-07 15:30 ? - 72 2020-09-07 15:40 ? - 73 2020-09-07 15:50 ? - 74 2020-09-07 16:00 32 ************* 75 2020-09-07 16:10 31 ************ 76 2020-09-07 16:20 31 ************ 77 2020-09-07 16:30 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 681 --- Lifetime Power-On Resets 0x01 0x010 4 5889 --- Power-on Hours 0x01 0x018 6 8356504243 --- Logical Sectors Written 0x01 0x020 6 64866060 --- Number of Write Commands 0x01 0x028 6 8739739015 --- Logical Sectors Read 0x01 0x030 6 129193527 --- Number of Read Commands 0x01 0x038 6 470000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x020 1 52 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1554 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 25 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.7-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 7 16:30:31 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 512) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 11387 12 Power_Cycle_Count -O--CK 098 098 000 - 1708 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 070 052 000 - 30 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 518 241 Total_LBAs_Written -O--CK 099 099 000 - 20945607083 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: ?/31 Celsius Lifetime Min/Max Temperature: 20/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (31) Index Estimated Time Temperature Celsius 32 2020-09-06 19:20 ? - ... ..( 33 skipped). .. - 66 2020-09-07 01:00 ? - 67 2020-09-07 01:10 27 ******** 68 2020-09-07 01:20 ? - 69 2020-09-07 01:30 30 *********** 70 2020-09-07 01:40 27 ******** 71 2020-09-07 01:50 27 ******** 72 2020-09-07 02:00 ? - ... ..( 6 skipped). .. - 79 2020-09-07 03:10 ? - 80 2020-09-07 03:20 31 ************ 81 2020-09-07 03:30 34 *************** 82 2020-09-07 03:40 35 **************** 83 2020-09-07 03:50 36 ***************** 84 2020-09-07 04:00 36 ***************** 85 2020-09-07 04:10 36 ***************** 86 2020-09-07 04:20 34 *************** 87 2020-09-07 04:30 30 *********** 88 2020-09-07 04:40 29 ********** 89 2020-09-07 04:50 29 ********** 90 2020-09-07 05:00 30 *********** ... ..( 4 skipped). .. *********** 95 2020-09-07 05:50 30 *********** 96 2020-09-07 06:00 31 ************ 97 2020-09-07 06:10 30 *********** ... ..( 2 skipped). .. *********** 100 2020-09-07 06:40 30 *********** 101 2020-09-07 06:50 31 ************ 102 2020-09-07 07:00 30 *********** 103 2020-09-07 07:10 29 ********** ... ..( 2 skipped). .. ********** 106 2020-09-07 07:40 29 ********** 107 2020-09-07 07:50 28 ********* 108 2020-09-07 08:00 27 ******** ... ..( 4 skipped). .. ******** 113 2020-09-07 08:50 27 ******** 114 2020-09-07 09:00 28 ********* ... ..( 3 skipped). .. ********* 118 2020-09-07 09:40 28 ********* 119 2020-09-07 09:50 27 ******** 120 2020-09-07 10:00 27 ******** 121 2020-09-07 10:10 28 ********* ... ..( 2 skipped). .. ********* 124 2020-09-07 10:40 28 ********* 125 2020-09-07 10:50 27 ******** ... ..( 3 skipped). .. ******** 1 2020-09-07 11:30 27 ******** 2 2020-09-07 11:40 28 ********* 3 2020-09-07 11:50 27 ******** ... ..( 11 skipped). .. ******** 15 2020-09-07 13:50 27 ******** 16 2020-09-07 14:00 ? - 17 2020-09-07 14:10 24 ***** 18 2020-09-07 14:20 25 ****** 19 2020-09-07 14:30 26 ******* 20 2020-09-07 14:40 27 ******** ... ..( 2 skipped). .. ******** 23 2020-09-07 15:10 27 ******** 24 2020-09-07 15:20 28 ********* 25 2020-09-07 15:30 ? - 26 2020-09-07 15:40 ? - 27 2020-09-07 15:50 ? - 28 2020-09-07 16:00 31 ************ ... ..( 2 skipped). .. ************ 31 2020-09-07 16:30 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 24 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.8.7-arch1-1] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD40EZRX-00SPEB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Sep 7 16:30:31 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (52980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 530) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 50 3 Spin_Up_Time POS--K 185 172 021 - 7708 4 Start_Stop_Count -O--CK 082 082 000 - 18425 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 080 080 000 - 14615 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2626 192 Power-Off_Retract_Count -O--CK 200 200 000 - 66 193 Load_Cycle_Count -O--CK 154 154 000 - 139875 194 Temperature_Celsius -O---K 114 109 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 5 198 Offline_Uncorrectable ----CK 200 200 000 - 4 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 102 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 6 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [5] occurred at disk power-on lifetime: 4479 hours (186 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 02:38:08.791 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 00 00 02:38:08.790 IDENTIFY DEVICE 61 00 08 00 b8 00 00 00 5c 64 78 40 00 02:38:05.548 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 40 00 02:38:05.524 FLUSH CACHE EXT 61 00 08 00 a8 00 00 00 5c 64 80 40 00 02:38:05.524 WRITE FPDMA QUEUED Error 5 [4] occurred at disk power-on lifetime: 4479 hours (186 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 02:38:04.174 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 00 00 02:38:04.174 IDENTIFY DEVICE 60 00 b8 00 88 00 00 03 15 ab 38 40 00 02:38:02.596 READ FPDMA QUEUED 60 01 00 00 80 00 00 03 15 aa 38 40 00 02:38:02.596 READ FPDMA QUEUED 60 01 00 00 78 00 00 03 15 a9 38 40 00 02:38:02.594 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 07:28:34.249 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 00 00 07:28:34.248 IDENTIFY DEVICE b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 07:28:28.919 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 00 00 07:28:28.919 IDENTIFY DEVICE 60 00 b8 00 00 00 00 03 15 ab 38 40 00 07:28:27.864 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 3504 hours (146 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 00 00 07:28:28.919 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 00 00 07:28:28.919 IDENTIFY DEVICE 60 00 b8 00 00 00 00 03 15 ab 38 40 00 07:28:27.864 READ FPDMA QUEUED 60 01 00 00 f8 00 00 03 15 aa 38 40 00 07:28:27.864 READ FPDMA QUEUED 60 01 00 00 f0 00 00 03 15 a9 38 40 00 07:28:27.862 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 1390 hours (57 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:10:17.168 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:10:17.167 IDENTIFY DEVICE b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:10:10.829 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:10:10.829 IDENTIFY DEVICE b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:10:08.483 SMART READ DATA Error 1 [0] occurred at disk power-on lifetime: 1390 hours (57 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 00 00 00 a0 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d6 00 01 00 00 00 c2 4f e0 a0 00 00:10:10.829 SMART WRITE LOG ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:10:10.829 IDENTIFY DEVICE b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:10:08.483 SMART READ DATA b0 00 d0 00 01 00 00 00 c2 4f 01 a0 00 00:10:08.480 SMART READ DATA 60 00 13 00 58 00 00 03 bc eb 32 40 00 00:10:06.049 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 38/38 Celsius Lifetime Min/Max Temperature: 3/43 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (1) Index Estimated Time Temperature Celsius 2 2020-09-07 08:33 29 ********** 3 2020-09-07 08:34 29 ********** 4 2020-09-07 08:35 30 *********** 5 2020-09-07 08:36 30 *********** 6 2020-09-07 08:37 30 *********** 7 2020-09-07 08:38 31 ************ ... ..( 2 skipped). .. ************ 10 2020-09-07 08:41 31 ************ 11 2020-09-07 08:42 32 ************* ... ..( 7 skipped). .. ************* 19 2020-09-07 08:50 32 ************* 20 2020-09-07 08:51 33 ************** 21 2020-09-07 08:52 ? - 22 2020-09-07 08:53 32 ************* ... ..( 6 skipped). .. ************* 29 2020-09-07 09:00 32 ************* 30 2020-09-07 09:01 33 ************** ... ..( 3 skipped). .. ************** 34 2020-09-07 09:05 33 ************** 35 2020-09-07 09:06 34 *************** ... ..( 6 skipped). .. *************** 42 2020-09-07 09:13 34 *************** 43 2020-09-07 09:14 35 **************** 44 2020-09-07 09:15 35 **************** 45 2020-09-07 09:16 ? - 46 2020-09-07 09:17 33 ************** ... ..( 3 skipped). .. ************** 50 2020-09-07 09:21 33 ************** 51 2020-09-07 09:22 34 *************** ... ..( 4 skipped). .. *************** 56 2020-09-07 09:27 34 *************** 57 2020-09-07 09:28 35 **************** 58 2020-09-07 09:29 35 **************** 59 2020-09-07 09:30 ? - 60 2020-09-07 09:31 36 ***************** ... ..( 8 skipped). .. ***************** 69 2020-09-07 09:40 36 ***************** 70 2020-09-07 09:41 37 ****************** ... ..( 56 skipped). .. ****************** 127 2020-09-07 10:38 37 ****************** 128 2020-09-07 10:39 ? - 129 2020-09-07 10:40 38 ******************* ... ..( 43 skipped). .. ******************* 173 2020-09-07 11:24 38 ******************* 174 2020-09-07 11:25 37 ****************** ... ..(288 skipped). .. ****************** 463 2020-09-07 16:14 37 ****************** 464 2020-09-07 16:15 ? - 465 2020-09-07 16:16 25 ****** 466 2020-09-07 16:17 25 ****** 467 2020-09-07 16:18 25 ****** 468 2020-09-07 16:19 26 ******* 469 2020-09-07 16:20 26 ******* 470 2020-09-07 16:21 27 ******** 471 2020-09-07 16:22 27 ******** 472 2020-09-07 16:23 28 ********* ... ..( 3 skipped). .. ********* 476 2020-09-07 16:27 28 ********* 477 2020-09-07 16:28 29 ********** 0 2020-09-07 16:29 29 ********** 1 2020-09-07 16:30 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2923 Vendor specific