Probe #edccb6dd67 of HP ProLiant DL360 Gen9

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 11 13:20:59 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1896 12 Power_Cycle_Count -O--CK 099 099 000 - 41 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 073 058 000 - 27 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 32 241 Total_LBAs_Written -O--CK 099 099 000 - 3713662510 252 Unknown_Attribute -O--CK 100 100 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 24/35 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (36) Index Estimated Time Temperature Celsius 37 2025-07-10 16:10 27 ******** 38 2025-07-10 16:20 28 ********* 39 2025-07-10 16:30 28 ********* 40 2025-07-10 16:40 27 ******** 41 2025-07-10 16:50 27 ******** 42 2025-07-10 17:00 28 ********* 43 2025-07-10 17:10 27 ******** 44 2025-07-10 17:20 29 ********** 45 2025-07-10 17:30 30 *********** 46 2025-07-10 17:40 30 *********** 47 2025-07-10 17:50 30 *********** 48 2025-07-10 18:00 31 ************ 49 2025-07-10 18:10 30 *********** 50 2025-07-10 18:20 29 ********** 51 2025-07-10 18:30 27 ******** 52 2025-07-10 18:40 28 ********* 53 2025-07-10 18:50 28 ********* 54 2025-07-10 19:00 28 ********* 55 2025-07-10 19:10 29 ********** 56 2025-07-10 19:20 28 ********* 57 2025-07-10 19:30 28 ********* 58 2025-07-10 19:40 27 ******** ... ..( 2 skipped). .. ******** 61 2025-07-10 20:10 27 ******** 62 2025-07-10 20:20 26 ******* 63 2025-07-10 20:30 27 ******** 64 2025-07-10 20:40 26 ******* ... ..( 39 skipped). .. ******* 104 2025-07-11 03:20 26 ******* 105 2025-07-11 03:30 27 ******** 106 2025-07-11 03:40 26 ******* ... ..( 2 skipped). .. ******* 109 2025-07-11 04:10 26 ******* 110 2025-07-11 04:20 27 ******** 111 2025-07-11 04:30 27 ******** 112 2025-07-11 04:40 26 ******* ... ..( 3 skipped). .. ******* 116 2025-07-11 05:20 26 ******* 117 2025-07-11 05:30 25 ****** 118 2025-07-11 05:40 28 ********* 119 2025-07-11 05:50 26 ******* 120 2025-07-11 06:00 25 ****** ... ..( 2 skipped). .. ****** 123 2025-07-11 06:30 25 ****** 124 2025-07-11 06:40 26 ******* 125 2025-07-11 06:50 25 ****** ... ..( 5 skipped). .. ****** 3 2025-07-11 07:50 25 ****** 4 2025-07-11 08:00 27 ******** 5 2025-07-11 08:10 26 ******* 6 2025-07-11 08:20 26 ******* 7 2025-07-11 08:30 27 ******** 8 2025-07-11 08:40 28 ********* 9 2025-07-11 08:50 27 ******** 10 2025-07-11 09:00 26 ******* 11 2025-07-11 09:10 30 *********** 12 2025-07-11 09:20 27 ******** ... ..( 3 skipped). .. ******** 16 2025-07-11 10:00 27 ******** 17 2025-07-11 10:10 29 ********** 18 2025-07-11 10:20 26 ******* 19 2025-07-11 10:30 27 ******** 20 2025-07-11 10:40 27 ******** 21 2025-07-11 10:50 27 ******** 22 2025-07-11 11:00 28 ********* 23 2025-07-11 11:10 27 ******** 24 2025-07-11 11:20 27 ******** 25 2025-07-11 11:30 28 ********* 26 2025-07-11 11:40 28 ********* 27 2025-07-11 11:50 27 ******** 28 2025-07-11 12:00 28 ********* 29 2025-07-11 12:10 27 ******** 30 2025-07-11 12:20 28 ********* 31 2025-07-11 12:30 29 ********** 32 2025-07-11 12:40 29 ********** 33 2025-07-11 12:50 27 ******** 34 2025-07-11 13:00 26 ******* 35 2025-07-11 13:10 27 ******** 36 2025-07-11 13:20 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 41 --- Lifetime Power-On Resets 0x01 0x010 4 1896 --- Power-on Hours 0x01 0x018 6 3713662510 --- Logical Sectors Written 0x01 0x020 6 90448992 --- Number of Write Commands 0x01 0x028 6 528213284 --- Logical Sectors Read 0x01 0x030 6 6266026 --- Number of Read Commands 0x01 0x038 6 1220000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 62 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 11 13:20:59 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1894 12 Power_Cycle_Count -O--CK 099 099 000 - 24 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 058 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 19 241 Total_LBAs_Written -O--CK 099 099 000 - 3714598574 252 Unknown_Attribute -O--CK 100 100 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 24/35 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2025-07-10 16:10 28 ********* 15 2025-07-10 16:20 28 ********* 16 2025-07-10 16:30 28 ********* 17 2025-07-10 16:40 27 ******** 18 2025-07-10 16:50 27 ******** 19 2025-07-10 17:00 29 ********** 20 2025-07-10 17:10 28 ********* 21 2025-07-10 17:20 29 ********** 22 2025-07-10 17:30 31 ************ ... ..( 3 skipped). .. ************ 26 2025-07-10 18:10 31 ************ 27 2025-07-10 18:20 30 *********** 28 2025-07-10 18:30 28 ********* 29 2025-07-10 18:40 29 ********** 30 2025-07-10 18:50 28 ********* 31 2025-07-10 19:00 28 ********* 32 2025-07-10 19:10 30 *********** 33 2025-07-10 19:20 28 ********* 34 2025-07-10 19:30 28 ********* 35 2025-07-10 19:40 27 ******** ... ..( 5 skipped). .. ******** 41 2025-07-10 20:40 27 ******** 42 2025-07-10 20:50 26 ******* 43 2025-07-10 21:00 27 ******** 44 2025-07-10 21:10 26 ******* ... ..( 3 skipped). .. ******* 48 2025-07-10 21:50 26 ******* 49 2025-07-10 22:00 27 ******** 50 2025-07-10 22:10 26 ******* 51 2025-07-10 22:20 27 ******** 52 2025-07-10 22:30 27 ******** 53 2025-07-10 22:40 26 ******* 54 2025-07-10 22:50 26 ******* 55 2025-07-10 23:00 27 ******** 56 2025-07-10 23:10 26 ******* 57 2025-07-10 23:20 26 ******* 58 2025-07-10 23:30 27 ******** 59 2025-07-10 23:40 27 ******** 60 2025-07-10 23:50 26 ******* ... ..( 18 skipped). .. ******* 79 2025-07-11 03:00 26 ******* 80 2025-07-11 03:10 27 ******** 81 2025-07-11 03:20 27 ******** 82 2025-07-11 03:30 27 ******** 83 2025-07-11 03:40 26 ******* ... ..( 2 skipped). .. ******* 86 2025-07-11 04:10 26 ******* 87 2025-07-11 04:20 27 ******** 88 2025-07-11 04:30 27 ******** 89 2025-07-11 04:40 26 ******* ... ..( 3 skipped). .. ******* 93 2025-07-11 05:20 26 ******* 94 2025-07-11 05:30 25 ****** 95 2025-07-11 05:40 28 ********* 96 2025-07-11 05:50 26 ******* ... ..( 5 skipped). .. ******* 102 2025-07-11 06:50 26 ******* 103 2025-07-11 07:00 25 ****** 104 2025-07-11 07:10 26 ******* ... ..( 2 skipped). .. ******* 107 2025-07-11 07:40 26 ******* 108 2025-07-11 07:50 25 ****** 109 2025-07-11 08:00 27 ******** 110 2025-07-11 08:10 26 ******* 111 2025-07-11 08:20 26 ******* 112 2025-07-11 08:30 28 ********* 113 2025-07-11 08:40 29 ********** 114 2025-07-11 08:50 28 ********* 115 2025-07-11 09:00 27 ******** 116 2025-07-11 09:10 30 *********** 117 2025-07-11 09:20 27 ******** 118 2025-07-11 09:30 27 ******** 119 2025-07-11 09:40 27 ******** 120 2025-07-11 09:50 28 ********* 121 2025-07-11 10:00 27 ******** 122 2025-07-11 10:10 30 *********** 123 2025-07-11 10:20 27 ******** ... ..( 2 skipped). .. ******** 126 2025-07-11 10:50 27 ******** 127 2025-07-11 11:00 28 ********* ... ..( 3 skipped). .. ********* 3 2025-07-11 11:40 28 ********* 4 2025-07-11 11:50 27 ******** 5 2025-07-11 12:00 29 ********** 6 2025-07-11 12:10 28 ********* 7 2025-07-11 12:20 29 ********** 8 2025-07-11 12:30 30 *********** 9 2025-07-11 12:40 29 ********** 10 2025-07-11 12:50 28 ********* 11 2025-07-11 13:00 27 ******** 12 2025-07-11 13:10 28 ********* 13 2025-07-11 13:20 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 1894 --- Power-on Hours 0x01 0x018 6 3714598574 --- Logical Sectors Written 0x01 0x020 6 91309850 --- Number of Write Commands 0x01 0x028 6 528580567 --- Logical Sectors Read 0x01 0x030 6 6274474 --- Number of Read Commands 0x01 0x038 6 3370000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 63 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 11 13:20:59 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1894 12 Power_Cycle_Count -O--CK 099 099 000 - 24 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 074 058 000 - 26 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 19 241 Total_LBAs_Written -O--CK 099 099 000 - 3711936425 252 Unknown_Attribute -O--CK 100 100 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 23/33 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2025-07-10 16:10 26 ******* 15 2025-07-10 16:20 26 ******* 16 2025-07-10 16:30 26 ******* 17 2025-07-10 16:40 25 ****** 18 2025-07-10 16:50 25 ****** 19 2025-07-10 17:00 27 ******** 20 2025-07-10 17:10 26 ******* 21 2025-07-10 17:20 29 ********** ... ..( 4 skipped). .. ********** 26 2025-07-10 18:10 29 ********** 27 2025-07-10 18:20 28 ********* 28 2025-07-10 18:30 26 ******* 29 2025-07-10 18:40 28 ********* 30 2025-07-10 18:50 27 ******** 31 2025-07-10 19:00 26 ******* 32 2025-07-10 19:10 28 ********* 33 2025-07-10 19:20 27 ******** 34 2025-07-10 19:30 27 ******** 35 2025-07-10 19:40 26 ******* 36 2025-07-10 19:50 25 ****** 37 2025-07-10 20:00 26 ******* 38 2025-07-10 20:10 26 ******* 39 2025-07-10 20:20 25 ****** ... ..( 17 skipped). .. ****** 57 2025-07-10 23:20 25 ****** 58 2025-07-10 23:30 26 ******* 59 2025-07-10 23:40 25 ****** ... ..( 26 skipped). .. ****** 86 2025-07-11 04:10 25 ****** 87 2025-07-11 04:20 26 ******* 88 2025-07-11 04:30 25 ****** ... ..( 4 skipped). .. ****** 93 2025-07-11 05:20 25 ****** 94 2025-07-11 05:30 24 ***** 95 2025-07-11 05:40 27 ******** 96 2025-07-11 05:50 25 ****** ... ..( 11 skipped). .. ****** 108 2025-07-11 07:50 25 ****** 109 2025-07-11 08:00 26 ******* 110 2025-07-11 08:10 25 ****** 111 2025-07-11 08:20 25 ****** 112 2025-07-11 08:30 27 ******** 113 2025-07-11 08:40 27 ******** 114 2025-07-11 08:50 26 ******* 115 2025-07-11 09:00 25 ****** 116 2025-07-11 09:10 29 ********** 117 2025-07-11 09:20 26 ******* ... ..( 3 skipped). .. ******* 121 2025-07-11 10:00 26 ******* 122 2025-07-11 10:10 28 ********* 123 2025-07-11 10:20 26 ******* ... ..( 8 skipped). .. ******* 4 2025-07-11 11:50 26 ******* 5 2025-07-11 12:00 27 ******** 6 2025-07-11 12:10 26 ******* 7 2025-07-11 12:20 27 ******** 8 2025-07-11 12:30 28 ********* 9 2025-07-11 12:40 27 ******** 10 2025-07-11 12:50 26 ******* ... ..( 2 skipped). .. ******* 13 2025-07-11 13:20 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 1894 --- Power-on Hours 0x01 0x018 6 3711936425 --- Logical Sectors Written 0x01 0x020 6 90475322 --- Number of Write Commands 0x01 0x028 6 526801579 --- Logical Sectors Read 0x01 0x030 6 6266206 --- Number of Read Commands 0x01 0x038 6 3378000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 63 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-11-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jul 11 13:20:59 2025 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1894 12 Power_Cycle_Count -O--CK 099 099 000 - 24 177 Wear_Leveling_Count PO--C- 099 099 000 - 8 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 073 058 000 - 27 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 19 241 Total_LBAs_Written -O--CK 099 099 000 - 3710989103 252 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 24/34 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (13) Index Estimated Time Temperature Celsius 14 2025-07-10 16:10 26 ******* 15 2025-07-10 16:20 27 ******** 16 2025-07-10 16:30 27 ******** 17 2025-07-10 16:40 26 ******* 18 2025-07-10 16:50 26 ******* 19 2025-07-10 17:00 27 ******** 20 2025-07-10 17:10 27 ******** 21 2025-07-10 17:20 29 ********** 22 2025-07-10 17:30 30 *********** ... ..( 3 skipped). .. *********** 26 2025-07-10 18:10 30 *********** 27 2025-07-10 18:20 29 ********** 28 2025-07-10 18:30 27 ******** 29 2025-07-10 18:40 28 ********* 30 2025-07-10 18:50 27 ******** 31 2025-07-10 19:00 27 ******** 32 2025-07-10 19:10 28 ********* 33 2025-07-10 19:20 27 ******** 34 2025-07-10 19:30 27 ******** 35 2025-07-10 19:40 26 ******* 36 2025-07-10 19:50 26 ******* 37 2025-07-10 20:00 27 ******** 38 2025-07-10 20:10 26 ******* ... ..( 6 skipped). .. ******* 45 2025-07-10 21:20 26 ******* 46 2025-07-10 21:30 25 ****** 47 2025-07-10 21:40 26 ******* 48 2025-07-10 21:50 25 ****** 49 2025-07-10 22:00 26 ******* ... ..( 11 skipped). .. ******* 61 2025-07-11 00:00 26 ******* 62 2025-07-11 00:10 25 ****** 63 2025-07-11 00:20 26 ******* 64 2025-07-11 00:30 25 ****** 65 2025-07-11 00:40 26 ******* ... ..( 5 skipped). .. ******* 71 2025-07-11 01:40 26 ******* 72 2025-07-11 01:50 25 ****** 73 2025-07-11 02:00 26 ******* 74 2025-07-11 02:10 25 ****** 75 2025-07-11 02:20 25 ****** 76 2025-07-11 02:30 26 ******* 77 2025-07-11 02:40 26 ******* 78 2025-07-11 02:50 25 ****** 79 2025-07-11 03:00 25 ****** 80 2025-07-11 03:10 25 ****** 81 2025-07-11 03:20 26 ******* 82 2025-07-11 03:30 26 ******* 83 2025-07-11 03:40 26 ******* 84 2025-07-11 03:50 25 ****** 85 2025-07-11 04:00 25 ****** 86 2025-07-11 04:10 26 ******* 87 2025-07-11 04:20 27 ******** 88 2025-07-11 04:30 25 ****** 89 2025-07-11 04:40 25 ****** 90 2025-07-11 04:50 25 ****** 91 2025-07-11 05:00 26 ******* 92 2025-07-11 05:10 26 ******* 93 2025-07-11 05:20 26 ******* 94 2025-07-11 05:30 25 ****** 95 2025-07-11 05:40 28 ********* 96 2025-07-11 05:50 26 ******* 97 2025-07-11 06:00 26 ******* 98 2025-07-11 06:10 25 ****** 99 2025-07-11 06:20 25 ****** 100 2025-07-11 06:30 25 ****** 101 2025-07-11 06:40 26 ******* 102 2025-07-11 06:50 25 ****** 103 2025-07-11 07:00 25 ****** 104 2025-07-11 07:10 26 ******* 105 2025-07-11 07:20 25 ****** 106 2025-07-11 07:30 25 ****** 107 2025-07-11 07:40 26 ******* 108 2025-07-11 07:50 25 ****** 109 2025-07-11 08:00 27 ******** 110 2025-07-11 08:10 26 ******* 111 2025-07-11 08:20 26 ******* 112 2025-07-11 08:30 27 ******** 113 2025-07-11 08:40 28 ********* 114 2025-07-11 08:50 27 ******** 115 2025-07-11 09:00 26 ******* 116 2025-07-11 09:10 30 *********** 117 2025-07-11 09:20 26 ******* 118 2025-07-11 09:30 26 ******* 119 2025-07-11 09:40 26 ******* 120 2025-07-11 09:50 27 ******** 121 2025-07-11 10:00 26 ******* 122 2025-07-11 10:10 29 ********** 123 2025-07-11 10:20 26 ******* ... ..( 2 skipped). .. ******* 126 2025-07-11 10:50 26 ******* 127 2025-07-11 11:00 27 ******** 0 2025-07-11 11:10 26 ******* 1 2025-07-11 11:20 27 ******** ... ..( 2 skipped). .. ******** 4 2025-07-11 11:50 27 ******** 5 2025-07-11 12:00 28 ********* 6 2025-07-11 12:10 27 ******** 7 2025-07-11 12:20 27 ******** 8 2025-07-11 12:30 29 ********** 9 2025-07-11 12:40 29 ********** 10 2025-07-11 12:50 27 ******** 11 2025-07-11 13:00 26 ******* 12 2025-07-11 13:10 27 ******** 13 2025-07-11 13:20 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 24 --- Lifetime Power-On Resets 0x01 0x010 4 1894 --- Power-on Hours 0x01 0x018 6 3710989103 --- Logical Sectors Written 0x01 0x020 6 91107229 --- Number of Write Commands 0x01 0x028 6 525336218 --- Logical Sectors Read 0x01 0x030 6 6244870 --- Number of Read Commands 0x01 0x038 6 3364000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x020 1 42 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 63 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub