/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 27 07:56:27 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (38880) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 390) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 178 173 021 - 6100 4 Start_Stop_Count -O--CK 098 098 000 - 2584 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 9884 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2528 192 Power-Off_Retract_Count -O--CK 200 200 000 - 75 193 Load_Cycle_Count -O--CK 196 196 000 - 13959 194 Temperature_Celsius -O---K 122 111 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 26/28 Celsius Lifetime Min/Max Temperature: 2/39 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (108) Index Estimated Time Temperature Celsius 109 2020-08-26 23:59 29 ********** ... ..( 22 skipped). .. ********** 132 2020-08-27 00:22 29 ********** 133 2020-08-27 00:23 ? - 134 2020-08-27 00:24 29 ********** ... ..( 55 skipped). .. ********** 190 2020-08-27 01:20 29 ********** 191 2020-08-27 01:21 30 *********** ... ..( 62 skipped). .. *********** 254 2020-08-27 02:24 30 *********** 255 2020-08-27 02:25 31 ************ ... ..(114 skipped). .. ************ 370 2020-08-27 04:20 31 ************ 371 2020-08-27 04:21 ? - 372 2020-08-27 04:22 28 ********* ... ..( 11 skipped). .. ********* 384 2020-08-27 04:34 28 ********* 385 2020-08-27 04:35 29 ********** ... ..( 12 skipped). .. ********** 398 2020-08-27 04:48 29 ********** 399 2020-08-27 04:49 30 *********** ... ..( 30 skipped). .. *********** 430 2020-08-27 05:20 30 *********** 431 2020-08-27 05:21 31 ************ ... ..(117 skipped). .. ************ 71 2020-08-27 07:19 31 ************ 72 2020-08-27 07:20 ? - 73 2020-08-27 07:21 26 ******* 74 2020-08-27 07:22 26 ******* 75 2020-08-27 07:23 27 ******** ... ..( 3 skipped). .. ******** 79 2020-08-27 07:27 27 ******** 80 2020-08-27 07:28 28 ********* 81 2020-08-27 07:29 27 ******** 82 2020-08-27 07:30 27 ******** 83 2020-08-27 07:31 27 ******** 84 2020-08-27 07:32 28 ********* ... ..( 20 skipped). .. ********* 105 2020-08-27 07:53 28 ********* 106 2020-08-27 07:54 29 ********** 107 2020-08-27 07:55 29 ********** 108 2020-08-27 07:56 29 ********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 462 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 27 07:56:27 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (39060) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 392) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 180 175 021 - 5966 4 Start_Stop_Count -O--CK 098 098 000 - 2584 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 9884 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2528 192 Power-Off_Retract_Count -O--CK 200 200 000 - 75 193 Load_Cycle_Count -O--CK 196 196 000 - 13931 194 Temperature_Celsius -O---K 122 110 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 27/28 Celsius Lifetime Min/Max Temperature: 2/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (91) Index Estimated Time Temperature Celsius 92 2020-08-26 23:59 29 ********** ... ..( 4 skipped). .. ********** 97 2020-08-27 00:04 29 ********** 98 2020-08-27 00:05 30 *********** ... ..( 16 skipped). .. *********** 115 2020-08-27 00:22 30 *********** 116 2020-08-27 00:23 ? - 117 2020-08-27 00:24 29 ********** ... ..( 3 skipped). .. ********** 121 2020-08-27 00:28 29 ********** 122 2020-08-27 00:29 30 *********** ... ..( 54 skipped). .. *********** 177 2020-08-27 01:24 30 *********** 178 2020-08-27 01:25 31 ************ ... ..(174 skipped). .. ************ 353 2020-08-27 04:20 31 ************ 354 2020-08-27 04:21 ? - 355 2020-08-27 04:22 28 ********* ... ..( 3 skipped). .. ********* 359 2020-08-27 04:26 28 ********* 360 2020-08-27 04:27 29 ********** ... ..( 8 skipped). .. ********** 369 2020-08-27 04:36 29 ********** 370 2020-08-27 04:37 30 *********** ... ..( 25 skipped). .. *********** 396 2020-08-27 05:03 30 *********** 397 2020-08-27 05:04 31 ************ ... ..( 75 skipped). .. ************ 473 2020-08-27 06:20 31 ************ 474 2020-08-27 06:21 32 ************* ... ..( 12 skipped). .. ************* 9 2020-08-27 06:34 32 ************* 10 2020-08-27 06:35 31 ************ ... ..( 43 skipped). .. ************ 54 2020-08-27 07:19 31 ************ 55 2020-08-27 07:20 ? - 56 2020-08-27 07:21 27 ******** ... ..( 2 skipped). .. ******** 59 2020-08-27 07:24 27 ******** 60 2020-08-27 07:25 28 ********* ... ..( 14 skipped). .. ********* 75 2020-08-27 07:40 28 ********* 76 2020-08-27 07:41 29 ********** ... ..( 14 skipped). .. ********** 91 2020-08-27 07:56 29 ********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 462 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 PRO 512GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVM02B6Q User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Aug 27 07:56:27 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1151 12 Power_Cycle_Count -O--CK 099 099 000 - 257 177 Wear_Leveling_Count PO--C- 099 099 000 - 5 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 071 054 000 - 29 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 52 235 POR_Recovery_Count -O--C- 099 099 000 - 47 241 Total_LBAs_Written -O--CK 099 099 000 - 2967732692 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 25/25 Celsius Lifetime Min/Max Temperature: 23/46 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (60) Index Estimated Time Temperature Celsius 61 2020-08-26 10:40 32 ************* 62 2020-08-26 10:50 ? - 63 2020-08-26 11:00 26 ******* 64 2020-08-26 11:10 29 ********** 65 2020-08-26 11:20 33 ************** 66 2020-08-26 11:30 33 ************** 67 2020-08-26 11:40 27 ******** 68 2020-08-26 11:50 29 ********** 69 2020-08-26 12:00 28 ********* 70 2020-08-26 12:10 28 ********* 71 2020-08-26 12:20 28 ********* 72 2020-08-26 12:30 ? - 73 2020-08-26 12:40 31 ************ 74 2020-08-26 12:50 35 **************** 75 2020-08-26 13:00 31 ************ 76 2020-08-26 13:10 ? - 77 2020-08-26 13:20 ? - 78 2020-08-26 13:30 ? - 79 2020-08-26 13:40 27 ******** 80 2020-08-26 13:50 36 ***************** 81 2020-08-26 14:00 35 **************** 82 2020-08-26 14:10 31 ************ 83 2020-08-26 14:20 33 ************** 84 2020-08-26 14:30 34 *************** 85 2020-08-26 14:40 36 ***************** 86 2020-08-26 14:50 28 ********* 87 2020-08-26 15:00 ? - 88 2020-08-26 15:10 36 ***************** 89 2020-08-26 15:20 30 *********** 90 2020-08-26 15:30 32 ************* 91 2020-08-26 15:40 29 ********** 92 2020-08-26 15:50 30 *********** 93 2020-08-26 16:00 38 ******************* 94 2020-08-26 16:10 30 *********** 95 2020-08-26 16:20 38 ******************* 96 2020-08-26 16:30 30 *********** 97 2020-08-26 16:40 36 ***************** 98 2020-08-26 16:50 37 ****************** 99 2020-08-26 17:00 36 ***************** 100 2020-08-26 17:10 30 *********** 101 2020-08-26 17:20 30 *********** 102 2020-08-26 17:30 30 *********** 103 2020-08-26 17:40 36 ***************** 104 2020-08-26 17:50 30 *********** 105 2020-08-26 18:00 38 ******************* 106 2020-08-26 18:10 30 *********** 107 2020-08-26 18:20 30 *********** 108 2020-08-26 18:30 29 ********** 109 2020-08-26 18:40 29 ********** 110 2020-08-26 18:50 30 *********** 111 2020-08-26 19:00 ? - 112 2020-08-26 19:10 ? - 113 2020-08-26 19:20 33 ************** 114 2020-08-26 19:30 29 ********** 115 2020-08-26 19:40 36 ***************** 116 2020-08-26 19:50 38 ******************* 117 2020-08-26 20:00 29 ********** ... ..( 2 skipped). .. ********** 120 2020-08-26 20:30 29 ********** 121 2020-08-26 20:40 31 ************ 122 2020-08-26 20:50 29 ********** 123 2020-08-26 21:00 30 *********** 124 2020-08-26 21:10 29 ********** 125 2020-08-26 21:20 37 ****************** 126 2020-08-26 21:30 30 *********** 127 2020-08-26 21:40 38 ******************* 0 2020-08-26 21:50 30 *********** 1 2020-08-26 22:00 37 ****************** 2 2020-08-26 22:10 31 ************ 3 2020-08-26 22:20 35 **************** 4 2020-08-26 22:30 37 ****************** 5 2020-08-26 22:40 30 *********** 6 2020-08-26 22:50 28 ********* 7 2020-08-26 23:00 29 ********** 8 2020-08-26 23:10 29 ********** 9 2020-08-26 23:20 35 **************** 10 2020-08-26 23:30 30 *********** 11 2020-08-26 23:40 29 ********** 12 2020-08-26 23:50 ? - 13 2020-08-27 00:00 29 ********** ... ..( 2 skipped). .. ********** 16 2020-08-27 00:30 29 ********** 17 2020-08-27 00:40 30 *********** 18 2020-08-27 00:50 ? - 19 2020-08-27 01:00 30 *********** 20 2020-08-27 01:10 29 ********** 21 2020-08-27 01:20 30 *********** ... ..( 6 skipped). .. *********** 28 2020-08-27 02:30 30 *********** 29 2020-08-27 02:40 31 ************ ... ..( 4 skipped). .. ************ 34 2020-08-27 03:30 31 ************ 35 2020-08-27 03:40 30 *********** 36 2020-08-27 03:50 31 ************ 37 2020-08-27 04:00 30 *********** 38 2020-08-27 04:10 31 ************ 39 2020-08-27 04:20 30 *********** 40 2020-08-27 04:30 30 *********** 41 2020-08-27 04:40 31 ************ 42 2020-08-27 04:50 ? - 43 2020-08-27 05:00 29 ********** 44 2020-08-27 05:10 30 *********** ... ..( 4 skipped). .. *********** 49 2020-08-27 06:00 30 *********** 50 2020-08-27 06:10 31 ************ 51 2020-08-27 06:20 31 ************ 52 2020-08-27 06:30 32 ************* 53 2020-08-27 06:40 32 ************* 54 2020-08-27 06:50 32 ************* 55 2020-08-27 07:00 31 ************ 56 2020-08-27 07:10 30 *********** 57 2020-08-27 07:20 30 *********** 58 2020-08-27 07:30 31 ************ 59 2020-08-27 07:40 31 ************ 60 2020-08-27 07:50 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 257 --- Lifetime Power-On Resets 0x01 0x010 4 1151 --- Power-on Hours 0x01 0x018 6 2967732692 --- Logical Sectors Written 0x01 0x020 6 45251122 --- Number of Write Commands 0x01 0x028 6 888630875 --- Logical Sectors Read 0x01 0x030 6 12533468 --- Number of Read Commands 0x01 0x038 6 851000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 29 --- Current Temperature 0x05 0x020 1 46 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 936 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 52 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC