/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.20-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10002 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jul 13 15:25:34 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12840) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 214) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 876 2 Throughput_Performance POS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3464 4 Start_Stop_Count -O--CK 090 090 000 - 11056 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate POSR-K 252 252 051 - 0 8 Seek_Time_Performance P-S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3305 10 Spin_Retry_Count PO--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 67 12 Power_Cycle_Count -O--CK 095 095 000 - 5673 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 6647676 183 Runtime_Bad_Block -O--CK 252 252 010 - 0 184 End-to-End_Error PO--CK 252 252 048 - 0 186 Unknown_Attribute -O--CK 252 252 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 2 188 Command_Timeout -O--CK 100 100 000 - 2 190 Airflow_Temperature_Cel -O---- 058 048 040 - 42 (Min/Max 10/52) 191 G-Sense_Error_Rate -O---K 100 100 000 - 15 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 093 093 000 - 75334 194 Temperature_Celsius -O---- 058 048 000 - 42 (Min/Max 10/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 9721 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 2036 hours (84 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 6d 97 00 00 00 00 00 00 40 00 Error: UNC 28055 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 74 70 6d 8f 40 00 00:00:00.003 READ DMA EXT 25 00 00 00 01 00 00 74 70 6d af 40 00 00:00:00.003 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 1a 40 00 00:00:00.003 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 12 40 00 00:00:00.003 READ DMA EXT 25 00 00 00 08 00 00 00 00 00 0a 40 00 00:00:00.003 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 1986 hours (82 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 89 c8 00 00 00 00 00 00 40 00 Error: UNC 35272 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 01 89 c0 40 00 00:00:00.008 READ DMA EXT 25 00 00 00 08 00 00 09 f7 0b f8 40 00 00:00:00.008 READ DMA EXT 25 00 00 00 08 00 00 09 f7 0b f0 40 00 00:00:00.008 READ DMA EXT 25 00 00 00 08 00 00 09 f7 0b e8 40 00 00:00:00.008 READ DMA EXT 25 00 00 00 08 00 00 09 f7 0b e0 40 00 00:00:00.008 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1145 - # 2 Short offline Completed without error 00% 1119 - # 3 Short offline Completed without error 00% 1108 - # 4 Short offline Completed without error 00% 1099 - # 5 Short offline Completed without error 00% 1092 - # 6 Short offline Completed without error 00% 1084 - # 7 Short offline Completed without error 00% 1075 - # 8 Short offline Completed without error 00% 1062 - # 9 Short offline Completed without error 00% 1004 - #10 Short offline Completed without error 00% 298 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: 32/42 Celsius Lifetime Min/Max Temperature: 11/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (33) Index Estimated Time Temperature Celsius 34 2023-07-13 04:50 42 *********************** 35 2023-07-13 04:55 40 ********************* 36 2023-07-13 05:00 41 ********************** ... ..( 4 skipped). .. ********************** 41 2023-07-13 05:25 41 ********************** 42 2023-07-13 05:30 38 ******************* 43 2023-07-13 05:35 39 ******************** 44 2023-07-13 05:40 40 ********************* 45 2023-07-13 05:45 40 ********************* 46 2023-07-13 05:50 42 *********************** 47 2023-07-13 05:55 42 *********************** 48 2023-07-13 06:00 43 ************************ 49 2023-07-13 06:05 43 ************************ 50 2023-07-13 06:10 43 ************************ 51 2023-07-13 06:15 44 ************************* ... ..( 2 skipped). .. ************************* 54 2023-07-13 06:30 44 ************************* 55 2023-07-13 06:35 43 ************************ 56 2023-07-13 06:40 43 ************************ 57 2023-07-13 06:45 43 ************************ 58 2023-07-13 06:50 45 ************************** 59 2023-07-13 06:55 46 *************************** 60 2023-07-13 07:00 47 **************************** 61 2023-07-13 07:05 47 **************************** 62 2023-07-13 07:10 46 *************************** 63 2023-07-13 07:15 46 *************************** 64 2023-07-13 07:20 46 *************************** 65 2023-07-13 07:25 32 ************* 66 2023-07-13 07:30 35 **************** 67 2023-07-13 07:35 37 ****************** 68 2023-07-13 07:40 37 ****************** 69 2023-07-13 07:45 38 ******************* 70 2023-07-13 07:50 34 *************** 71 2023-07-13 07:55 35 **************** 72 2023-07-13 08:00 37 ****************** 73 2023-07-13 08:05 37 ****************** 74 2023-07-13 08:10 41 ********************** 75 2023-07-13 08:15 43 ************************ 76 2023-07-13 08:20 43 ************************ 77 2023-07-13 08:25 42 *********************** ... ..( 2 skipped). .. *********************** 80 2023-07-13 08:40 42 *********************** 81 2023-07-13 08:45 31 ************ 82 2023-07-13 08:50 33 ************** 83 2023-07-13 08:55 34 *************** 84 2023-07-13 09:00 35 **************** 85 2023-07-13 09:05 37 ****************** 86 2023-07-13 09:10 39 ******************** 87 2023-07-13 09:15 40 ********************* 88 2023-07-13 09:20 40 ********************* 89 2023-07-13 09:25 40 ********************* 90 2023-07-13 09:30 43 ************************ 91 2023-07-13 09:35 43 ************************ 92 2023-07-13 09:40 42 *********************** 93 2023-07-13 09:45 41 ********************** 94 2023-07-13 09:50 41 ********************** 95 2023-07-13 09:55 41 ********************** 96 2023-07-13 10:00 40 ********************* ... ..( 11 skipped). .. ********************* 108 2023-07-13 11:00 40 ********************* 109 2023-07-13 11:05 41 ********************** 110 2023-07-13 11:10 33 ************** 111 2023-07-13 11:15 35 **************** 112 2023-07-13 11:20 36 ***************** 113 2023-07-13 11:25 37 ****************** 114 2023-07-13 11:30 38 ******************* 115 2023-07-13 11:35 38 ******************* 116 2023-07-13 11:40 39 ******************** ... ..( 2 skipped). .. ******************** 119 2023-07-13 11:55 39 ******************** 120 2023-07-13 12:00 40 ********************* 121 2023-07-13 12:05 41 ********************** 122 2023-07-13 12:10 41 ********************** 123 2023-07-13 12:15 41 ********************** 124 2023-07-13 12:20 43 ************************ 125 2023-07-13 12:25 44 ************************* 126 2023-07-13 12:30 45 ************************** 127 2023-07-13 12:35 47 **************************** 0 2023-07-13 12:40 48 ***************************** 1 2023-07-13 12:45 48 ***************************** 2 2023-07-13 12:50 49 ****************************** 3 2023-07-13 12:55 50 ******************************* 4 2023-07-13 13:00 49 ****************************** 5 2023-07-13 13:05 47 **************************** 6 2023-07-13 13:10 46 *************************** 7 2023-07-13 13:15 44 ************************* 8 2023-07-13 13:20 44 ************************* 9 2023-07-13 13:25 43 ************************ ... ..( 2 skipped). .. ************************ 12 2023-07-13 13:40 43 ************************ 13 2023-07-13 13:45 42 *********************** ... ..( 2 skipped). .. *********************** 16 2023-07-13 14:00 42 *********************** 17 2023-07-13 14:05 43 ************************ 18 2023-07-13 14:10 43 ************************ 19 2023-07-13 14:15 42 *********************** ... ..( 2 skipped). .. *********************** 22 2023-07-13 14:30 42 *********************** 23 2023-07-13 14:35 35 **************** 24 2023-07-13 14:40 38 ******************* 25 2023-07-13 14:45 39 ******************** 26 2023-07-13 14:50 39 ******************** 27 2023-07-13 14:55 40 ********************* 28 2023-07-13 15:00 40 ********************* 29 2023-07-13 15:05 41 ********************** 30 2023-07-13 15:10 41 ********************** 31 2023-07-13 15:15 42 *********************** 32 2023-07-13 15:20 42 *********************** 33 2023-07-13 15:25 42 *********************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 471 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.20-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: OCZ-NOCTI Serial Number: -- LU WWN Device Id: 5 e83a97 ... Firmware Version: 2.25 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 13 15:25:35 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 4 9 Power_On_Hours_and_Msec -O--CK 094 094 000 - 5865h+36m+30.200s 12 Power_Cycle_Count -O--CK 095 095 000 - 5702 171 Program_Fail_Count -O--CK 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 213 177 Wear_Range_Delta ------ 000 000 000 - 7 181 Program_Fail_Count -O--CK 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) 195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 4 201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 100 100 010 - 0 233 SandForce_Internal ------ 000 000 000 - 8168 234 SandForce_Internal -O--CK 000 000 000 - 10116 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 10116 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 9460 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/30 Celsius Lifetime Min/Max Temperature: 30/30 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (1) Index Estimated Time Temperature Celsius 2 2023-07-13 07:28 ? - ... ..(476 skipped). .. - 1 2023-07-13 15:25 ? - SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.20-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10002 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Jul 13 15:25:35 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13260) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 221) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 5 2 Throughput_Performance POS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 089 089 025 - 3461 4 Start_Stop_Count -O--CK 089 089 000 - 11428 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate POSR-K 252 252 051 - 0 8 Seek_Time_Performance P-S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 2443 10 Spin_Retry_Count PO--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 90 12 Power_Cycle_Count -O--CK 095 095 000 - 5473 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 585565 183 Runtime_Bad_Block -O--CK 252 252 010 - 0 184 End-to-End_Error PO--CK 252 252 048 - 0 186 Unknown_Attribute -O--CK 252 252 000 - 0 187 Reported_Uncorrect -O--CK 252 252 000 - 0 188 Command_Timeout -O--CK 252 252 000 - 0 190 Airflow_Temperature_Cel -O---- 063 052 040 - 37 (Min/Max 10/48) 191 G-Sense_Error_Rate -O---K 100 100 000 - 1 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 091 091 000 - 100039 194 Temperature_Celsius -O---- 063 052 000 - 37 (Min/Max 10/48) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 12796 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 846 - # 2 Short offline Completed without error 00% 832 - # 3 Short offline Completed without error 00% 827 - # 4 Short offline Completed without error 00% 823 - # 5 Short offline Completed without error 00% 820 - # 6 Short offline Completed without error 00% 816 - # 7 Short offline Completed without error 00% 812 - # 8 Short offline Completed without error 00% 807 - # 9 Short offline Completed without error 00% 780 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 31/37 Celsius Lifetime Min/Max Temperature: 11/48 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (118) Index Estimated Time Temperature Celsius 119 2023-07-13 04:50 37 ****************** 120 2023-07-13 04:55 38 ******************* 121 2023-07-13 05:00 39 ******************** 122 2023-07-13 05:05 40 ********************* ... ..( 2 skipped). .. ********************* 125 2023-07-13 05:20 40 ********************* 126 2023-07-13 05:25 41 ********************** 127 2023-07-13 05:30 41 ********************** 0 2023-07-13 05:35 41 ********************** 1 2023-07-13 05:40 40 ********************* 2 2023-07-13 05:45 31 ************ 3 2023-07-13 05:50 33 ************** 4 2023-07-13 05:55 34 *************** 5 2023-07-13 06:00 35 **************** 6 2023-07-13 06:05 35 **************** 7 2023-07-13 06:10 34 *************** 8 2023-07-13 06:15 36 ***************** 9 2023-07-13 06:20 35 **************** 10 2023-07-13 06:25 35 **************** 11 2023-07-13 06:30 35 **************** 12 2023-07-13 06:35 34 *************** 13 2023-07-13 06:40 33 ************** 14 2023-07-13 06:45 34 *************** 15 2023-07-13 06:50 35 **************** 16 2023-07-13 06:55 35 **************** 17 2023-07-13 07:00 35 **************** 18 2023-07-13 07:05 36 ***************** 19 2023-07-13 07:10 36 ***************** 20 2023-07-13 07:15 36 ***************** 21 2023-07-13 07:20 37 ****************** 22 2023-07-13 07:25 35 **************** 23 2023-07-13 07:30 36 ***************** ... ..( 2 skipped). .. ***************** 26 2023-07-13 07:45 36 ***************** 27 2023-07-13 07:50 37 ****************** ... ..( 2 skipped). .. ****************** 30 2023-07-13 08:05 37 ****************** 31 2023-07-13 08:10 36 ***************** ... ..( 2 skipped). .. ***************** 34 2023-07-13 08:25 36 ***************** 35 2023-07-13 08:30 33 ************** 36 2023-07-13 08:35 34 *************** 37 2023-07-13 08:40 35 **************** 38 2023-07-13 08:45 35 **************** 39 2023-07-13 08:50 35 **************** 40 2023-07-13 08:55 32 ************* 41 2023-07-13 09:00 34 *************** 42 2023-07-13 09:05 35 **************** 43 2023-07-13 09:10 36 ***************** 44 2023-07-13 09:15 37 ****************** 45 2023-07-13 09:20 38 ******************* ... ..( 3 skipped). .. ******************* 49 2023-07-13 09:40 38 ******************* 50 2023-07-13 09:45 39 ******************** 51 2023-07-13 09:50 35 **************** 52 2023-07-13 09:55 36 ***************** 53 2023-07-13 10:00 37 ****************** 54 2023-07-13 10:05 37 ****************** 55 2023-07-13 10:10 38 ******************* ... ..( 2 skipped). .. ******************* 58 2023-07-13 10:25 38 ******************* 59 2023-07-13 10:30 39 ******************** ... ..( 7 skipped). .. ******************** 67 2023-07-13 11:10 39 ******************** 68 2023-07-13 11:15 30 *********** 69 2023-07-13 11:20 32 ************* 70 2023-07-13 11:25 34 *************** 71 2023-07-13 11:30 35 **************** 72 2023-07-13 11:35 36 ***************** ... ..( 3 skipped). .. ***************** 76 2023-07-13 11:55 36 ***************** 77 2023-07-13 12:00 35 **************** 78 2023-07-13 12:05 35 **************** 79 2023-07-13 12:10 31 ************ 80 2023-07-13 12:15 32 ************* 81 2023-07-13 12:20 33 ************** 82 2023-07-13 12:25 34 *************** 83 2023-07-13 12:30 33 ************** 84 2023-07-13 12:35 29 ********** 85 2023-07-13 12:40 30 *********** 86 2023-07-13 12:45 32 ************* 87 2023-07-13 12:50 33 ************** 88 2023-07-13 12:55 33 ************** 89 2023-07-13 13:00 34 *************** ... ..( 3 skipped). .. *************** 93 2023-07-13 13:20 34 *************** 94 2023-07-13 13:25 35 **************** ... ..( 5 skipped). .. **************** 100 2023-07-13 13:55 35 **************** 101 2023-07-13 14:00 30 *********** 102 2023-07-13 14:05 32 ************* 103 2023-07-13 14:10 33 ************** 104 2023-07-13 14:15 33 ************** 105 2023-07-13 14:20 33 ************** 106 2023-07-13 14:25 34 *************** 107 2023-07-13 14:30 34 *************** 108 2023-07-13 14:35 32 ************* 109 2023-07-13 14:40 34 *************** 110 2023-07-13 14:45 34 *************** 111 2023-07-13 14:50 34 *************** 112 2023-07-13 14:55 32 ************* 113 2023-07-13 15:00 35 **************** 114 2023-07-13 15:05 36 ***************** 115 2023-07-13 15:10 36 ***************** 116 2023-07-13 15:15 37 ****************** 117 2023-07-13 15:20 37 ****************** 118 2023-07-13 15:25 37 ****************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 30 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific