/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar 5K750 Device Model: Hitachi HTS547575A9E384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JE4OA50A User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Dec 28 15:40:57 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 215) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 1 2 Throughput_Performance P-S--- 198 198 040 - 134 3 Spin_Up_Time POS--- 189 189 033 - 1 4 Start_Stop_Count -O--C- 095 095 000 - 9105 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 117 117 040 - 33 9 Power_On_Hours -O--C- 070 070 000 - 13408 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 5999 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 099 099 000 - 279 193 Load_Cycle_Count -O--C- 086 086 000 - 143045 194 Temperature_Celsius -O---- 127 127 000 - 47 (Min/Max 15/61) 196 Reallocated_Event_Count -O--CK 100 100 000 - 36 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 30 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 30 [1] occurred at disk power-on lifetime: 6204 hours (258 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 57 54 66 c9 07 00 Error: IDNF at LBA = 0x575466c9 = 1465149129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 38 00 00 57 54 66 c9 40 00 05:41:38.756 READ FPDMA QUEUED 60 00 40 00 30 00 00 57 54 66 89 40 00 05:41:38.756 READ FPDMA QUEUED 60 00 40 00 28 00 00 57 54 66 49 40 00 05:41:38.755 READ FPDMA QUEUED 60 00 40 00 20 00 00 57 54 66 09 40 00 05:41:38.755 READ FPDMA QUEUED 60 00 40 00 18 00 00 57 54 65 c9 40 00 05:41:38.755 READ FPDMA QUEUED Error 29 [0] occurred at disk power-on lifetime: 6204 hours (258 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 57 54 66 c9 07 00 Error: IDNF at LBA = 0x575466c9 = 1465149129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 80 00 00 57 54 66 c9 40 00 05:01:45.544 READ FPDMA QUEUED 60 00 40 00 78 00 00 57 54 66 89 40 00 05:01:45.543 READ FPDMA QUEUED 60 00 40 00 70 00 00 57 54 66 49 40 00 05:01:45.543 READ FPDMA QUEUED 60 00 40 00 68 00 00 57 54 66 09 40 00 05:01:45.543 READ FPDMA QUEUED 60 00 40 00 60 00 00 57 54 65 c9 40 00 05:01:45.542 READ FPDMA QUEUED Error 28 [3] occurred at disk power-on lifetime: 6204 hours (258 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 57 54 66 c9 07 00 Error: IDNF at LBA = 0x575466c9 = 1465149129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 a8 00 00 57 54 66 c9 40 00 04:59:50.663 READ FPDMA QUEUED 60 00 40 00 a0 00 00 57 54 66 89 40 00 04:59:50.662 READ FPDMA QUEUED 60 00 40 00 98 00 00 57 54 66 49 40 00 04:59:50.662 READ FPDMA QUEUED 60 00 40 00 90 00 00 57 54 66 09 40 00 04:59:50.661 READ FPDMA QUEUED 60 00 40 00 88 00 00 57 54 65 c9 40 00 04:59:50.661 READ FPDMA QUEUED Error 27 [2] occurred at disk power-on lifetime: 6202 hours (258 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 40 00 00 57 54 66 c9 07 00 Error: IDNF at LBA = 0x575466c9 = 1465149129 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 40 00 08 00 00 57 54 66 c9 40 00 02:59:52.142 READ FPDMA QUEUED 60 00 40 00 00 00 00 57 54 66 89 40 00 02:59:52.141 READ FPDMA QUEUED 60 00 40 00 f8 00 00 57 54 66 49 40 00 02:59:52.141 READ FPDMA QUEUED 60 00 40 00 f0 00 00 57 54 66 09 40 00 02:59:52.141 READ FPDMA QUEUED 60 00 40 00 e8 00 00 57 54 65 c9 40 00 02:59:52.140 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 47 Celsius Power Cycle Min/Max Temperature: 24/47 Celsius Lifetime Min/Max Temperature: 15/61 Celsius Lifetime Average Temperature: 40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (36) Index Estimated Time Temperature Celsius 37 2019-12-28 13:33 49 ****************************** ... ..( 2 skipped). .. ****************************** 40 2019-12-28 13:36 49 ****************************** 41 2019-12-28 13:37 50 ******************************* ... ..( 8 skipped). .. ******************************* 50 2019-12-28 13:46 50 ******************************* 51 2019-12-28 13:47 49 ****************************** ... ..( 7 skipped). .. ****************************** 59 2019-12-28 13:55 49 ****************************** 60 2019-12-28 13:56 ? - 61 2019-12-28 13:57 48 ***************************** ... ..( 2 skipped). .. ***************************** 64 2019-12-28 14:00 48 ***************************** 65 2019-12-28 14:01 47 **************************** 66 2019-12-28 14:02 47 **************************** 67 2019-12-28 14:03 48 ***************************** 68 2019-12-28 14:04 48 ***************************** 69 2019-12-28 14:05 48 ***************************** 70 2019-12-28 14:06 49 ****************************** 71 2019-12-28 14:07 49 ****************************** 72 2019-12-28 14:08 49 ****************************** 73 2019-12-28 14:09 48 ***************************** ... ..( 3 skipped). .. ***************************** 77 2019-12-28 14:13 48 ***************************** 78 2019-12-28 14:14 47 **************************** ... ..( 11 skipped). .. **************************** 90 2019-12-28 14:26 47 **************************** 91 2019-12-28 14:27 48 ***************************** ... ..( 3 skipped). .. ***************************** 95 2019-12-28 14:31 48 ***************************** 96 2019-12-28 14:32 49 ****************************** ... ..( 3 skipped). .. ****************************** 100 2019-12-28 14:36 49 ****************************** 101 2019-12-28 14:37 48 ***************************** ... ..( 3 skipped). .. ***************************** 105 2019-12-28 14:41 48 ***************************** 106 2019-12-28 14:42 49 ****************************** ... ..( 7 skipped). .. ****************************** 114 2019-12-28 14:50 49 ****************************** 115 2019-12-28 14:51 48 ***************************** 116 2019-12-28 14:52 48 ***************************** 117 2019-12-28 14:53 49 ****************************** 118 2019-12-28 14:54 48 ***************************** 119 2019-12-28 14:55 49 ****************************** ... ..( 8 skipped). .. ****************************** 0 2019-12-28 15:04 49 ****************************** 1 2019-12-28 15:05 ? - 2 2019-12-28 15:06 25 ****** 3 2019-12-28 15:07 26 ******* 4 2019-12-28 15:08 27 ******** 5 2019-12-28 15:09 28 ********* 6 2019-12-28 15:10 29 ********** 7 2019-12-28 15:11 30 *********** 8 2019-12-28 15:12 32 ************* 9 2019-12-28 15:13 33 ************** 10 2019-12-28 15:14 34 *************** 11 2019-12-28 15:15 35 **************** 12 2019-12-28 15:16 36 ***************** 13 2019-12-28 15:17 37 ****************** 14 2019-12-28 15:18 38 ******************* 15 2019-12-28 15:19 39 ******************** 16 2019-12-28 15:20 39 ******************** 17 2019-12-28 15:21 40 ********************* 18 2019-12-28 15:22 41 ********************** 19 2019-12-28 15:23 41 ********************** 20 2019-12-28 15:24 42 *********************** 21 2019-12-28 15:25 42 *********************** 22 2019-12-28 15:26 42 *********************** 23 2019-12-28 15:27 43 ************************ 24 2019-12-28 15:28 43 ************************ 25 2019-12-28 15:29 44 ************************* 26 2019-12-28 15:30 44 ************************* 27 2019-12-28 15:31 45 ************************** 28 2019-12-28 15:32 45 ************************** 29 2019-12-28 15:33 45 ************************** 30 2019-12-28 15:34 46 *************************** ... ..( 3 skipped). .. *************************** 34 2019-12-28 15:38 46 *************************** 35 2019-12-28 15:39 47 **************************** 36 2019-12-28 15:40 47 **************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 5999 --- Lifetime Power-On Resets 0x01 0x010 4 13408 --- Power-on Hours 0x01 0x018 6 65611049448 --- Logical Sectors Written 0x01 0x020 6 933543062 --- Number of Write Commands 0x01 0x028 6 106012486015 --- Logical Sectors Read 0x01 0x030 6 1293532942 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 12728 --- Spindle Motor Power-on Hours 0x03 0x010 4 12717 --- Head Flying Hours 0x03 0x018 4 143045 --- Head Load Events 0x03 0x020 4 35 --- Number of Reallocated Logical Sectors 0x03 0x028 4 175076 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 30 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 16782 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 47 --- Current Temperature 0x05 0x010 1 41 N-- Average Short Term Temperature 0x05 0x018 1 39 N-- Average Long Term Temperature 0x05 0x020 1 61 --- Highest Temperature 0x05 0x028 1 15 --- Lowest Temperature 0x05 0x030 1 46 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 44 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 10 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 94300 --- Number of Hardware Resets 0x06 0x010 4 7185 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS