[ 9.717] (--) Log file renamed from "/var/log/Xorg.pid-767.log" to "/var/log/Xorg.0.log" [ 9.719] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 9.719] Current Operating System: Linux XXX 6.12.23-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 10 Apr 2025 13:28:36 +0000 x86_64 [ 9.719] Kernel command line: initrd=\9319a79140b9412fbf28c888e5acd2ed\6.12.23-1-lts\initrd nvme_load=YES nowatchdog rw rootflags=subvol=/@ root=UUID=HASH_ED4-E648-5550-F828-731DBD5096E8 systemd.machine_id=9319a79140b9412fbf28c888e5acd2ed [ 9.719] [ 9.719] Current version of pixman: 0.44.2 [ 9.719] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.719] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.719] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 15 15:00:55 2025 [ 9.720] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 9.720] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.720] (==) No Layout section. Using the first Screen section. [ 9.720] (==) No screen section available. Using defaults. [ 9.720] (**) |-->Screen "Default Screen Section" (0) [ 9.720] (**) | |-->Monitor "<default monitor>" [ 9.720] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.720] (**) Allowing byte-swapped clients [ 9.720] (==) Automatically adding devices [ 9.720] (==) Automatically enabling devices [ 9.720] (==) Automatically adding GPU devices [ 9.720] (==) Automatically binding GPU devices [ 9.720] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 9.721] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 9.721] Entry deleted from font path. [ 9.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 9.721] Entry deleted from font path. [ 9.721] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 9.721] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 9.721] Entry deleted from font path. [ 9.721] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 9.721] Entry deleted from font path. [ 9.721] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 9.721] Entry deleted from font path. [ 9.721] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 9.721] Entry deleted from font path. [ 9.721] (==) FontPath set to: [ 9.721] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.721] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.721] (II) Module ABI versions: [ 9.721] X.Org ANSI C Emulation: 0.4 [ 9.721] X.Org Video Driver: 25.2 [ 9.721] X.Org XInput driver : 24.4 [ 9.721] X.Org Server Extension : 10.0 [ 9.722] (++) using VT number 2 [ 9.722] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.723] (II) xfree86: Adding drm device (/dev/dri/card0) [ 9.723] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/simple-framebuffer.0/drm/card0 [ 9.734] (II) xfree86: Adding drm device (/dev/dri/card1) [ 9.734] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1 [ 9.736] (--) PCI: (0@0:2:0) 8086:3e92:103c:83e1 rev 0, Mem @ 0xe0000000/16777216, 0xd0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072 [ 9.736] (--) PCI:*(1@0:0:0) 10de:1d01:19da:2476 rev 161, Mem @ 0xe1000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 9.736] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 9.736] (II) LoadModule: "glx" [ 9.736] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.742] (II) Module glx: vendor="X.Org Foundation" [ 9.742] compiled for 1.21.1.16, module version = 1.0.0 [ 9.742] ABI class: X.Org Server Extension, version 10.0 [ 9.742] (==) Matched nouveau as autoconfigured driver 0 [ 9.742] (==) Matched nv as autoconfigured driver 1 [ 9.742] (==) Matched intel as autoconfigured driver 2 [ 9.742] (==) Matched modesetting as autoconfigured driver 3 [ 9.742] (==) Matched fbdev as autoconfigured driver 4 [ 9.742] (==) Matched vesa as autoconfigured driver 5 [ 9.742] (==) Assigned the driver to the xf86ConfigLayout [ 9.742] (II) LoadModule: "nouveau" [ 9.742] (WW) Warning, couldn't open module nouveau [ 9.742] (EE) Failed to load module "nouveau" (module does not exist, 0) [ 9.742] (II) LoadModule: "nv" [ 9.742] (WW) Warning, couldn't open module nv [ 9.742] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.742] (II) LoadModule: "intel" [ 9.742] (WW) Warning, couldn't open module intel [ 9.742] (EE) Failed to load module "intel" (module does not exist, 0) [ 9.742] (II) LoadModule: "modesetting" [ 9.742] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 9.743] (II) Module modesetting: vendor="X.Org Foundation" [ 9.743] compiled for 1.21.1.16, module version = 1.21.1 [ 9.743] Module class: X.Org Video Driver [ 9.743] ABI class: X.Org Video Driver, version 25.2 [ 9.743] (II) LoadModule: "fbdev" [ 9.743] (WW) Warning, couldn't open module fbdev [ 9.743] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 9.743] (II) LoadModule: "vesa" [ 9.743] (WW) Warning, couldn't open module vesa [ 9.743] (EE) Failed to load module "vesa" (module does not exist, 0) [ 9.743] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 9.777] (II) modeset(0): using drv /dev/dri/card0 [ 9.777] (II) modeset(G0): using drv /dev/dri/card1 [ 9.777] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.777] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 9.777] (==) modeset(0): RGB weight 888 [ 9.777] (==) modeset(0): Default visual is TrueColor [ 9.777] (II) Loading sub module "glamoregl" [ 9.778] (II) LoadModule: "glamoregl" [ 9.778] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.782] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.782] compiled for 1.21.1.16, module version = 1.0.1 [ 9.783] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.264] (II) modeset(0): Refusing to try glamor on llvmpipe [ 10.266] (II) modeset(0): glamor initialization failed [ 10.266] (II) modeset(0): ShadowFB: preferred NO, enabled NO [ 10.266] (II) modeset(0): Output None-1 has no monitor section [ 10.266] (II) modeset(0): EDID for output None-1 [ 10.266] (II) modeset(0): Printing probed modes for output None-1 [ 10.266] (II) modeset(0): Modeline "1920x1080"x60.0 124.42 1920 1920 1920 1920 1080 1080 1080 1080 (64.8 kHz eP) [ 10.266] (II) modeset(0): Output None-1 connected [ 10.266] (II) modeset(0): Using exact sizes for initial modes [ 10.266] (II) modeset(0): Output None-1 using initial mode 1920x1080 +0+0 [ 10.266] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 10.266] (==) modeset(0): DPI set to (96, 96) [ 10.266] (II) Loading sub module "fb" [ 10.266] (II) LoadModule: "fb" [ 10.266] (II) Module "fb" already built-in [ 10.266] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32 [ 10.266] (==) modeset(G0): RGB weight 888 [ 10.266] (==) modeset(G0): Default visual is TrueColor [ 10.266] (II) Loading sub module "glamoregl" [ 10.266] (II) LoadModule: "glamoregl" [ 10.266] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 10.266] (II) Module glamoregl: vendor="X.Org Foundation" [ 10.266] compiled for 1.21.1.16, module version = 1.0.1 [ 10.266] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.284] (II) modeset(G0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics 630 (CFL GT2) [ 10.284] (II) modeset(G0): glamor initialized [ 10.293] (II) modeset(G0): Output DP-1-1 has no monitor section [ 10.303] (II) modeset(G0): Output HDMI-1-1 has no monitor section [ 10.313] (II) modeset(G0): Output DP-1-2 has no monitor section [ 10.322] (II) modeset(G0): Output HDMI-1-2 has no monitor section [ 10.330] (II) modeset(G0): Output DP-1-3 has no monitor section [ 10.340] (II) modeset(G0): Output HDMI-1-3 has no monitor section [ 10.350] (II) modeset(G0): EDID for output DP-1-1 [ 10.360] (II) modeset(G0): EDID for output HDMI-1-1 [ 10.370] (II) modeset(G0): EDID for output DP-1-2 [ 10.380] (II) modeset(G0): EDID for output HDMI-1-2 [ 10.390] (II) modeset(G0): EDID for output DP-1-3 [ 10.398] (II) modeset(G0): EDID for output HDMI-1-3 [ 10.398] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0) [ 10.398] (==) modeset(G0): DPI set to (96, 96) [ 10.398] (II) Loading sub module "fb" [ 10.398] (II) LoadModule: "fb" [ 10.398] (II) Module "fb" already built-in [ 10.398] (==) modeset(0): Backing store enabled [ 10.398] (==) modeset(0): Silken mouse enabled [ 10.398] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 10.398] (==) modeset(0): DPMS enabled [ 10.468] (==) modeset(G0): Backing store enabled [ 10.468] (==) modeset(G0): Silken mouse enabled [ 10.469] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc. [ 10.469] (==) modeset(G0): DPMS enabled [ 10.469] (II) modeset(G0): [DRI2] Setup complete [ 10.469] (II) modeset(G0): [DRI2] DRI driver: iris [ 10.469] (II) modeset(G0): [DRI2] VDPAU driver: va_gl [ 10.469] (II) modeset(G0): Disable reverse prime offload mode for i915. [ 10.469] (II) Initializing extension Generic Event Extension [ 10.469] (II) Initializing extension SHAPE [ 10.469] (II) Initializing extension MIT-SHM [ 10.469] (II) Initializing extension XInputExtension [ 10.469] (II) Initializing extension XTEST [ 10.469] (II) Initializing extension BIG-REQUESTS [ 10.469] (II) Initializing extension SYNC [ 10.469] (II) Initializing extension XKEYBOARD [ 10.470] (II) Initializing extension XC-MISC [ 10.470] (II) Initializing extension SECURITY [ 10.470] (II) Initializing extension XFIXES [ 10.470] (II) Initializing extension RENDER [ 10.470] (II) Initializing extension RANDR [ 10.470] (II) Initializing extension COMPOSITE [ 10.470] (II) Initializing extension DAMAGE [ 10.470] (II) Initializing extension MIT-SCREEN-SAVER [ 10.470] (II) Initializing extension DOUBLE-BUFFER [ 10.470] (II) Initializing extension RECORD [ 10.470] (II) Initializing extension DPMS [ 10.470] (II) Initializing extension Present [ 10.470] (II) Initializing extension DRI3 [ 10.470] (II) Initializing extension X-Resource [ 10.470] (II) Initializing extension XVideo [ 10.471] (II) Initializing extension XVideo-MotionCompensation [ 10.471] (II) Initializing extension GLX [ 10.471] (II) AIGLX: Screen 0 is not DRI2 capable [ 10.482] (II) IGLX: Loaded and initialized swrast [ 10.482] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 10.482] (II) Initializing extension XFree86-VidModeExtension [ 10.482] (II) Initializing extension XFree86-DGA [ 10.482] (II) Initializing extension XFree86-DRI [ 10.482] (II) Initializing extension DRI2 [ 10.482] (II) modeset(G0): Damage tracking initialized [ 10.484] (II) modeset(0): Damage tracking initialized [ 10.484] (II) modeset(0): Setting screen physical size to 508 x 285 [ 10.537] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 10.537] (**) Power Button: Applying InputClass "devname" [ 10.537] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.537] (**) Power Button: Applying InputClass "system-keyboard" [ 10.537] (II) LoadModule: "libinput" [ 10.537] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 10.541] (II) Module libinput: vendor="X.Org Foundation" [ 10.541] compiled for 1.21.1.13, module version = 1.5.0 [ 10.541] Module class: X.Org XInput Driver [ 10.541] ABI class: X.Org XInput driver, version 24.4 [ 10.541] (II) Using input driver 'libinput' for 'Power Button' [ 10.541] (**) Power Button: always reports core events [ 10.541] (**) Option "Device" "/dev/input/event2" [ 10.545] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.545] (II) event2 - Power Button: device is a keyboard [ 10.545] (II) event2 - Power Button: device removed [ 10.593] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 10.593] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 10.593] (**) Option "xkb_layout" "us" [ 10.593] (WW) Option "xkb_variant" requires a string value [ 10.594] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.594] (II) event2 - Power Button: device is a keyboard [ 10.594] (II) config/udev: Adding input device Video Bus (/dev/input/event18) [ 10.594] (**) Video Bus: Applying InputClass "devname" [ 10.594] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 10.594] (**) Video Bus: Applying InputClass "system-keyboard" [ 10.594] (II) Using input driver 'libinput' for 'Video Bus' [ 10.594] (**) Video Bus: always reports core events [ 10.594] (**) Option "Device" "/dev/input/event18" [ 10.595] (II) event18 - Video Bus: is tagged by udev as: Keyboard [ 10.595] (II) event18 - Video Bus: device is a keyboard [ 10.595] (II) event18 - Video Bus: device removed [ 10.660] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input31/event18" [ 10.660] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 10.660] (**) Option "xkb_layout" "us" [ 10.660] (WW) Option "xkb_variant" requires a string value [ 10.661] (II) event18 - Video Bus: is tagged by udev as: Keyboard [ 10.661] (II) event18 - Video Bus: device is a keyboard [ 10.661] (II) config/udev: Adding input device Video Bus (/dev/input/event17) [ 10.661] (**) Video Bus: Applying InputClass "devname" [ 10.661] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 10.661] (**) Video Bus: Applying InputClass "system-keyboard" [ 10.661] (II) Using input driver 'libinput' for 'Video Bus' [ 10.661] (**) Video Bus: always reports core events [ 10.661] (**) Option "Device" "/dev/input/event17" [ 10.662] (II) event17 - Video Bus: is tagged by udev as: Keyboard [ 10.662] (II) event17 - Video Bus: device is a keyboard [ 10.662] (II) event17 - Video Bus: device removed [ 10.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input30/event17" [ 10.713] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 10.713] (**) Option "xkb_layout" "us" [ 10.713] (WW) Option "xkb_variant" requires a string value [ 10.714] (II) event17 - Video Bus: is tagged by udev as: Keyboard [ 10.714] (II) event17 - Video Bus: device is a keyboard [ 10.715] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 10.715] (**) Power Button: Applying InputClass "devname" [ 10.715] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.715] (**) Power Button: Applying InputClass "system-keyboard" [ 10.715] (II) Using input driver 'libinput' for 'Power Button' [ 10.715] (**) Power Button: always reports core events [ 10.715] (**) Option "Device" "/dev/input/event1" [ 10.715] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.715] (II) event1 - Power Button: device is a keyboard [ 10.715] (II) event1 - Power Button: device removed [ 10.740] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 10.740] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 10.740] (**) Option "xkb_layout" "us" [ 10.740] (WW) Option "xkb_variant" requires a string value [ 10.740] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.741] (II) event1 - Power Button: device is a keyboard [ 10.741] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 10.741] (**) Sleep Button: Applying InputClass "devname" [ 10.741] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 10.741] (**) Sleep Button: Applying InputClass "system-keyboard" [ 10.741] (II) Using input driver 'libinput' for 'Sleep Button' [ 10.741] (**) Sleep Button: always reports core events [ 10.741] (**) Option "Device" "/dev/input/event0" [ 10.742] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 10.742] (II) event0 - Sleep Button: device is a keyboard [ 10.742] (II) event0 - Sleep Button: device removed [ 10.766] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 10.766] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10) [ 10.766] (**) Option "xkb_layout" "us" [ 10.766] (WW) Option "xkb_variant" requires a string value [ 10.767] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 10.767] (II) event0 - Sleep Button: device is a keyboard [ 10.768] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11) [ 10.768] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "devname" [ 10.768] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3' [ 10.768] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events [ 10.768] (**) Option "Device" "/dev/input/event11" [ 10.768] (II) event11 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch [ 10.810] (II) event11 - not using input device '/dev/input/event11'. [ 10.810] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event11 [ 10.810] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3" [ 10.810] (II) UnloadModule: "libinput" [ 10.810] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14) [ 10.810] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "devname" [ 10.810] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7' [ 10.810] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events [ 10.810] (**) Option "Device" "/dev/input/event14" [ 10.811] (II) event14 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch [ 10.863] (II) event14 - not using input device '/dev/input/event14'. [ 10.863] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event14 [ 10.863] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7" [ 10.863] (II) UnloadModule: "libinput" [ 10.863] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15) [ 10.863] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "devname" [ 10.863] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8' [ 10.863] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events [ 10.863] (**) Option "Device" "/dev/input/event15" [ 10.864] (II) event15 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch [ 10.916] (II) event15 - not using input device '/dev/input/event15'. [ 10.916] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event15 [ 10.916] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8" [ 10.916] (II) UnloadModule: "libinput" [ 10.917] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16) [ 10.917] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "devname" [ 10.917] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9' [ 10.917] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events [ 10.917] (**) Option "Device" "/dev/input/event16" [ 10.917] (II) event16 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch [ 10.970] (II) event16 - not using input device '/dev/input/event16'. [ 10.970] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event16 [ 10.970] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9" [ 10.970] (II) UnloadModule: "libinput" [ 10.971] (II) config/udev: Adding input device Keychron Keychron C3 Pro (/dev/input/event3) [ 10.971] (**) Keychron Keychron C3 Pro: Applying InputClass "devname" [ 10.971] (**) Keychron Keychron C3 Pro: Applying InputClass "libinput keyboard catchall" [ 10.971] (**) Keychron Keychron C3 Pro: Applying InputClass "system-keyboard" [ 10.971] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro' [ 10.971] (**) Keychron Keychron C3 Pro: always reports core events [ 10.971] (**) Option "Device" "/dev/input/event3" [ 10.972] (II) event3 - Keychron Keychron C3 Pro: is tagged by udev as: Keyboard [ 10.972] (II) event3 - Keychron Keychron C3 Pro: device is a keyboard [ 10.972] (II) event3 - Keychron Keychron C3 Pro: device removed [ 10.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:3434:0430.0001/input/input6/event3" [ 10.996] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro" (type: KEYBOARD, id 11) [ 10.996] (**) Option "xkb_layout" "us" [ 10.996] (WW) Option "xkb_variant" requires a string value [ 10.998] (II) event3 - Keychron Keychron C3 Pro: is tagged by udev as: Keyboard [ 10.998] (II) event3 - Keychron Keychron C3 Pro: device is a keyboard [ 10.998] (II) config/udev: Adding input device Keychron Keychron C3 Pro Keyboard (/dev/input/event7) [ 10.998] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "devname" [ 10.998] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.998] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "system-keyboard" [ 10.998] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Keyboard' [ 10.998] (**) Keychron Keychron C3 Pro Keyboard: always reports core events [ 10.998] (**) Option "Device" "/dev/input/event7" [ 10.999] (II) event7 - Keychron Keychron C3 Pro Keyboard: is tagged by udev as: Keyboard [ 10.999] (II) event7 - Keychron Keychron C3 Pro Keyboard: device is a keyboard [ 10.999] (II) event7 - Keychron Keychron C3 Pro Keyboard: device removed [ 11.043] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input10/event7" [ 11.043] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Keyboard" (type: KEYBOARD, id 12) [ 11.043] (**) Option "xkb_layout" "us" [ 11.043] (WW) Option "xkb_variant" requires a string value [ 11.044] (II) event7 - Keychron Keychron C3 Pro Keyboard: is tagged by udev as: Keyboard [ 11.044] (II) event7 - Keychron Keychron C3 Pro Keyboard: device is a keyboard [ 11.045] (II) config/udev: Adding input device Keychron Keychron C3 Pro Mouse (/dev/input/event4) [ 11.045] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "devname" [ 11.045] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "libinput pointer catchall" [ 11.045] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Mouse' [ 11.045] (**) Keychron Keychron C3 Pro Mouse: always reports core events [ 11.045] (**) Option "Device" "/dev/input/event4" [ 11.046] (II) event4 - Keychron Keychron C3 Pro Mouse: is tagged by udev as: Mouse [ 11.046] (II) event4 - Keychron Keychron C3 Pro Mouse: device is a pointer [ 11.046] (II) event4 - Keychron Keychron C3 Pro Mouse: device removed [ 11.096] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.096] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.096] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input7/event4" [ 11.096] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Mouse" (type: MOUSE, id 13) [ 11.097] (**) Option "AccelerationScheme" "none" [ 11.097] (**) Keychron Keychron C3 Pro Mouse: (accel) selected scheme none/0 [ 11.097] (**) Keychron Keychron C3 Pro Mouse: (accel) acceleration factor: 2.000 [ 11.097] (**) Keychron Keychron C3 Pro Mouse: (accel) acceleration threshold: 4 [ 11.098] (II) event4 - Keychron Keychron C3 Pro Mouse: is tagged by udev as: Mouse [ 11.098] (II) event4 - Keychron Keychron C3 Pro Mouse: device is a pointer [ 11.098] (II) config/udev: Adding input device Keychron Keychron C3 Pro Mouse (/dev/input/mouse0) [ 11.098] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "devname" [ 11.098] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Mouse' [ 11.098] (**) Keychron Keychron C3 Pro Mouse: always reports core events [ 11.098] (**) Option "Device" "/dev/input/mouse0" [ 11.150] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 11.150] (EE) libinput: Keychron Keychron C3 Pro Mouse: Failed to create a device for /dev/input/mouse0 [ 11.150] (EE) PreInit returned 2 for "Keychron Keychron C3 Pro Mouse" [ 11.150] (II) UnloadModule: "libinput" [ 11.150] (II) config/udev: Adding input device Keychron Keychron C3 Pro System Control (/dev/input/event5) [ 11.150] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "devname" [ 11.150] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "libinput keyboard catchall" [ 11.150] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "system-keyboard" [ 11.150] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro System Control' [ 11.150] (**) Keychron Keychron C3 Pro System Control: always reports core events [ 11.150] (**) Option "Device" "/dev/input/event5" [ 11.151] (II) event5 - Keychron Keychron C3 Pro System Control: is tagged by udev as: Keyboard Joystick [ 11.151] (II) event5 - Keychron Keychron C3 Pro System Control: device is a keyboard [ 11.152] (II) event5 - Keychron Keychron C3 Pro System Control: device removed [ 11.176] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input8/event5" [ 11.176] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro System Control" (type: KEYBOARD, id 14) [ 11.176] (**) Option "xkb_layout" "us" [ 11.176] (WW) Option "xkb_variant" requires a string value [ 11.178] (II) event5 - Keychron Keychron C3 Pro System Control: is tagged by udev as: Keyboard Joystick [ 11.178] (II) event5 - Keychron Keychron C3 Pro System Control: device is a keyboard [ 11.178] (II) config/udev: Adding input device Keychron Keychron C3 Pro Consumer Control (/dev/input/event6) [ 11.178] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "devname" [ 11.178] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.178] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "system-keyboard" [ 11.178] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Consumer Control' [ 11.178] (**) Keychron Keychron C3 Pro Consumer Control: always reports core events [ 11.178] (**) Option "Device" "/dev/input/event6" [ 11.179] (II) event6 - Keychron Keychron C3 Pro Consumer Control: is tagged by udev as: Keyboard [ 11.179] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device is a keyboard [ 11.179] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device removed [ 11.203] (II) libinput: Keychron Keychron C3 Pro Consumer Control: needs a virtual subdevice [ 11.203] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input9/event6" [ 11.203] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Consumer Control" (type: MOUSE, id 15) [ 11.203] (**) Option "AccelerationScheme" "none" [ 11.203] (**) Keychron Keychron C3 Pro Consumer Control: (accel) selected scheme none/0 [ 11.203] (**) Keychron Keychron C3 Pro Consumer Control: (accel) acceleration factor: 2.000 [ 11.203] (**) Keychron Keychron C3 Pro Consumer Control: (accel) acceleration threshold: 4 [ 11.204] (II) event6 - Keychron Keychron C3 Pro Consumer Control: is tagged by udev as: Keyboard [ 11.204] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device is a keyboard [ 11.205] (II) config/udev: Adding input device Logitech ERGO M575 (/dev/input/event8) [ 11.205] (**) Logitech ERGO M575: Applying InputClass "devname" [ 11.205] (**) Logitech ERGO M575: Applying InputClass "libinput pointer catchall" [ 11.205] (II) Using input driver 'libinput' for 'Logitech ERGO M575' [ 11.205] (**) Logitech ERGO M575: always reports core events [ 11.205] (**) Option "Device" "/dev/input/event8" [ 11.206] (II) event8 - Logitech ERGO M575: is tagged by udev as: Mouse [ 11.206] (II) event8 - Logitech ERGO M575: device is a pointer [ 11.207] (II) event8 - Logitech ERGO M575: device removed [ 11.276] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.276] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.276] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.276] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/0003:046D:C52B.0006/0003:046D:4096.0009/input/input23/event8" [ 11.276] (II) XINPUT: Adding extended input device "Logitech ERGO M575" (type: MOUSE, id 16) [ 11.277] (**) Option "AccelerationScheme" "none" [ 11.277] (**) Logitech ERGO M575: (accel) selected scheme none/0 [ 11.277] (**) Logitech ERGO M575: (accel) acceleration factor: 2.000 [ 11.277] (**) Logitech ERGO M575: (accel) acceleration threshold: 4 [ 11.278] (II) event8 - Logitech ERGO M575: is tagged by udev as: Mouse [ 11.278] (II) event8 - Logitech ERGO M575: device is a pointer [ 11.279] (II) config/udev: Adding input device Logitech ERGO M575 (/dev/input/mouse1) [ 11.279] (**) Logitech ERGO M575: Applying InputClass "devname" [ 11.279] (II) Using input driver 'libinput' for 'Logitech ERGO M575' [ 11.279] (**) Logitech ERGO M575: always reports core events [ 11.279] (**) Option "Device" "/dev/input/mouse1" [ 11.360] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 11.360] (EE) libinput: Logitech ERGO M575: Failed to create a device for /dev/input/mouse1 [ 11.360] (EE) PreInit returned 2 for "Logitech ERGO M575" [ 11.360] (II) UnloadModule: "libinput" [ 11.360] (II) config/udev: Adding input device Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control (/dev/input/event12) [ 11.360] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "devname" [ 11.360] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.360] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "system-keyboard" [ 11.360] (II) Using input driver 'libinput' for 'Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control' [ 11.360] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: always reports core events [ 11.360] (**) Option "Device" "/dev/input/event12" [ 11.362] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: is tagged by udev as: Keyboard [ 11.362] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device is a keyboard [ 11.362] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device removed [ 11.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:3537:0575.0007/input/input16/event12" [ 11.430] (II) XINPUT: Adding extended input device "Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control" (type: KEYBOARD, id 17) [ 11.430] (**) Option "xkb_layout" "us" [ 11.430] (WW) Option "xkb_variant" requires a string value [ 11.431] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: is tagged by udev as: Keyboard [ 11.431] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device is a keyboard [ 11.432] (II) config/udev: Adding input device Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 (/dev/input/event13) [ 11.432] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: Applying InputClass "devname" [ 11.432] (II) Using input driver 'libinput' for 'Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2' [ 11.432] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: always reports core events [ 11.432] (**) Option "Device" "/dev/input/event13" [ 11.433] (II) event13 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: not tagged as supported input device [ 11.483] (II) event13 - not using input device '/dev/input/event13'. [ 11.483] (EE) libinput: Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: Failed to create a device for /dev/input/event13 [ 11.483] (EE) PreInit returned 2 for "Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2" [ 11.483] (II) UnloadModule: "libinput" [ 11.484] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19) [ 11.484] (**) HDA Intel PCH Mic: Applying InputClass "devname" [ 11.484] (II) Using input driver 'libinput' for 'HDA Intel PCH Mic' [ 11.484] (**) HDA Intel PCH Mic: always reports core events [ 11.484] (**) Option "Device" "/dev/input/event19" [ 11.484] (II) event19 - HDA Intel PCH Mic: is tagged by udev as: Switch [ 11.536] (II) event19 - not using input device '/dev/input/event19'. [ 11.536] (EE) libinput: HDA Intel PCH Mic: Failed to create a device for /dev/input/event19 [ 11.536] (EE) PreInit returned 2 for "HDA Intel PCH Mic" [ 11.536] (II) UnloadModule: "libinput" [ 11.537] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20) [ 11.537] (**) HDA Intel PCH Line: Applying InputClass "devname" [ 11.537] (II) Using input driver 'libinput' for 'HDA Intel PCH Line' [ 11.537] (**) HDA Intel PCH Line: always reports core events [ 11.537] (**) Option "Device" "/dev/input/event20" [ 11.537] (II) event20 - HDA Intel PCH Line: is tagged by udev as: Switch [ 11.590] (II) event20 - not using input device '/dev/input/event20'. [ 11.590] (EE) libinput: HDA Intel PCH Line: Failed to create a device for /dev/input/event20 [ 11.590] (EE) PreInit returned 2 for "HDA Intel PCH Line" [ 11.590] (II) UnloadModule: "libinput" [ 11.590] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event21) [ 11.590] (**) HDA Intel PCH Line Out: Applying InputClass "devname" [ 11.590] (II) Using input driver 'libinput' for 'HDA Intel PCH Line Out' [ 11.590] (**) HDA Intel PCH Line Out: always reports core events [ 11.590] (**) Option "Device" "/dev/input/event21" [ 11.591] (II) event21 - HDA Intel PCH Line Out: is tagged by udev as: Switch [ 11.643] (II) event21 - not using input device '/dev/input/event21'. [ 11.643] (EE) libinput: HDA Intel PCH Line Out: Failed to create a device for /dev/input/event21 [ 11.643] (EE) PreInit returned 2 for "HDA Intel PCH Line Out" [ 11.643] (II) UnloadModule: "libinput" [ 11.643] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event22) [ 11.643] (**) HDA Intel PCH Front Headphone: Applying InputClass "devname" [ 11.643] (II) Using input driver 'libinput' for 'HDA Intel PCH Front Headphone' [ 11.643] (**) HDA Intel PCH Front Headphone: always reports core events [ 11.643] (**) Option "Device" "/dev/input/event22" [ 11.644] (II) event22 - HDA Intel PCH Front Headphone: is tagged by udev as: Switch [ 11.696] (II) event22 - not using input device '/dev/input/event22'. [ 11.696] (EE) libinput: HDA Intel PCH Front Headphone: Failed to create a device for /dev/input/event22 [ 11.696] (EE) PreInit returned 2 for "HDA Intel PCH Front Headphone" [ 11.696] (II) UnloadModule: "libinput" [ 11.697] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event23) [ 11.697] (**) HDA Intel PCH Front Headphone: Applying InputClass "devname" [ 11.697] (II) Using input driver 'libinput' for 'HDA Intel PCH Front Headphone' [ 11.697] (**) HDA Intel PCH Front Headphone: always reports core events [ 11.697] (**) Option "Device" "/dev/input/event23" [ 11.697] (II) event23 - HDA Intel PCH Front Headphone: is tagged by udev as: Switch [ 11.756] (II) event23 - not using input device '/dev/input/event23'. [ 11.756] (EE) libinput: HDA Intel PCH Front Headphone: Failed to create a device for /dev/input/event23 [ 11.756] (EE) PreInit returned 2 for "HDA Intel PCH Front Headphone" [ 11.756] (II) UnloadModule: "libinput" [ 11.757] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event24) [ 11.757] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "devname" [ 11.757] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=3' [ 11.757] (**) HDA Intel PCH HDMI/DP,pcm=3: always reports core events [ 11.757] (**) Option "Device" "/dev/input/event24" [ 11.757] (II) event24 - HDA Intel PCH HDMI/DP,pcm=3: is tagged by udev as: Switch [ 11.810] (II) event24 - not using input device '/dev/input/event24'. [ 11.810] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=3: Failed to create a device for /dev/input/event24 [ 11.810] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=3" [ 11.810] (II) UnloadModule: "libinput" [ 11.810] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event25) [ 11.810] (**) HDA Intel PCH HDMI/DP,pcm=7: Applying InputClass "devname" [ 11.810] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=7' [ 11.810] (**) HDA Intel PCH HDMI/DP,pcm=7: always reports core events [ 11.810] (**) Option "Device" "/dev/input/event25" [ 11.811] (II) event25 - HDA Intel PCH HDMI/DP,pcm=7: is tagged by udev as: Switch [ 11.856] (II) event25 - not using input device '/dev/input/event25'. [ 11.856] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=7: Failed to create a device for /dev/input/event25 [ 11.856] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=7" [ 11.856] (II) UnloadModule: "libinput" [ 11.857] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event26) [ 11.857] (**) HDA Intel PCH HDMI/DP,pcm=8: Applying InputClass "devname" [ 11.857] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=8' [ 11.857] (**) HDA Intel PCH HDMI/DP,pcm=8: always reports core events [ 11.857] (**) Option "Device" "/dev/input/event26" [ 11.857] (II) event26 - HDA Intel PCH HDMI/DP,pcm=8: is tagged by udev as: Switch [ 11.923] (II) event26 - not using input device '/dev/input/event26'. [ 11.923] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=8: Failed to create a device for /dev/input/event26 [ 11.923] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=8" [ 11.923] (II) UnloadModule: "libinput" [ 11.923] (II) config/udev: Adding input device PC Speaker (/dev/input/event9) [ 11.923] (**) PC Speaker: Applying InputClass "devname" [ 11.923] (II) Using input driver 'libinput' for 'PC Speaker' [ 11.924] (**) PC Speaker: always reports core events [ 11.924] (**) Option "Device" "/dev/input/event9" [ 11.924] (II) event9 - PC Speaker: not tagged as supported input device [ 11.976] (II) event9 - not using input device '/dev/input/event9'. [ 11.976] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event9 [ 11.976] (EE) PreInit returned 2 for "PC Speaker" [ 11.976] (II) UnloadModule: "libinput" [ 11.979] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10) [ 11.979] (**) HP WMI hotkeys: Applying InputClass "devname" [ 11.979] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 11.979] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 11.979] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 11.979] (**) HP WMI hotkeys: always reports core events [ 11.979] (**) Option "Device" "/dev/input/event10" [ 11.979] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 11.979] (II) event10 - HP WMI hotkeys: device is a keyboard [ 11.979] (II) event10 - HP WMI hotkeys: device removed [ 12.030] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event10" [ 12.030] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 18) [ 12.030] (**) Option "xkb_layout" "us" [ 12.030] (WW) Option "xkb_variant" requires a string value [ 12.030] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 12.030] (II) event10 - HP WMI hotkeys: device is a keyboard [ 12.034] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "devname" [ 12.034] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "libinput keyboard catchall" [ 12.034] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "system-keyboard" [ 12.034] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Consumer Control' [ 12.034] (**) Keychron Keychron C3 Pro Consumer Control: always reports core events [ 12.034] (**) Option "Device" "/dev/input/event6" [ 12.034] (II) libinput: Keychron Keychron C3 Pro Consumer Control: is a virtual subdevice [ 12.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input9/event6" [ 12.034] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Consumer Control" (type: KEYBOARD, id 19) [ 12.034] (**) Option "xkb_layout" "us" [ 12.034] (WW) Option "xkb_variant" requires a string value [ 20.769] (II) event2 - Power Button: device removed [ 20.816] (II) event18 - Video Bus: device removed [ 20.893] (II) event17 - Video Bus: device removed [ 20.946] (II) event1 - Power Button: device removed [ 20.973] (II) event0 - Sleep Button: device removed [ 21.000] (II) event3 - Keychron Keychron C3 Pro: device removed [ 21.026] (II) event7 - Keychron Keychron C3 Pro Keyboard: device removed [ 21.066] (II) event4 - Keychron Keychron C3 Pro Mouse: device removed [ 21.123] (II) event5 - Keychron Keychron C3 Pro System Control: device removed [ 21.150] (II) event8 - Logitech ERGO M575: device removed [ 21.203] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device removed [ 21.256] (II) event10 - HP WMI hotkeys: device removed [ 21.310] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device removed [ 702.227] (II) config/udev: removing device Power Button [ 702.227] (II) UnloadModule: "libinput" [ 702.227] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 702.227] (**) Power Button: Applying InputClass "devname" [ 702.227] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 702.227] (**) Power Button: Applying InputClass "system-keyboard" [ 702.227] (II) Using input driver 'libinput' for 'Power Button' [ 702.227] (**) Power Button: always reports core events [ 702.227] (**) Option "Device" "/dev/input/event2" [ 702.227] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 702.227] (II) event2 - Power Button: device is a keyboard [ 702.227] (II) event2 - Power Button: device removed [ 702.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 702.260] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 702.260] (**) Option "xkb_layout" "us" [ 702.260] (WW) Option "xkb_variant" requires a string value [ 702.260] (II) config/udev: removing device Video Bus [ 702.260] (II) UnloadModule: "libinput" [ 702.260] (II) config/udev: Adding input device Video Bus (/dev/input/event17) [ 702.260] (**) Video Bus: Applying InputClass "devname" [ 702.260] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 702.260] (**) Video Bus: Applying InputClass "system-keyboard" [ 702.260] (II) Using input driver 'libinput' for 'Video Bus' [ 702.260] (**) Video Bus: always reports core events [ 702.260] (**) Option "Device" "/dev/input/event17" [ 702.261] (II) event17 - Video Bus: is tagged by udev as: Keyboard [ 702.261] (II) event17 - Video Bus: device is a keyboard [ 702.262] (II) event17 - Video Bus: device removed [ 702.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:00/input/input30/event17" [ 702.290] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 702.290] (**) Option "xkb_layout" "us" [ 702.290] (WW) Option "xkb_variant" requires a string value [ 702.290] (II) config/udev: removing device Video Bus [ 702.290] (II) UnloadModule: "libinput" [ 702.290] (II) config/udev: Adding input device Video Bus (/dev/input/event18) [ 702.290] (**) Video Bus: Applying InputClass "devname" [ 702.290] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 702.290] (**) Video Bus: Applying InputClass "system-keyboard" [ 702.290] (II) Using input driver 'libinput' for 'Video Bus' [ 702.290] (**) Video Bus: always reports core events [ 702.290] (**) Option "Device" "/dev/input/event18" [ 702.291] (II) event18 - Video Bus: is tagged by udev as: Keyboard [ 702.291] (II) event18 - Video Bus: device is a keyboard [ 702.291] (II) event18 - Video Bus: device removed [ 702.308] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input31/event18" [ 702.308] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 702.308] (**) Option "xkb_layout" "us" [ 702.308] (WW) Option "xkb_variant" requires a string value [ 702.309] (II) config/udev: removing device Power Button [ 702.309] (II) UnloadModule: "libinput" [ 702.309] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 702.309] (**) Power Button: Applying InputClass "devname" [ 702.309] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 702.309] (**) Power Button: Applying InputClass "system-keyboard" [ 702.309] (II) Using input driver 'libinput' for 'Power Button' [ 702.309] (**) Power Button: always reports core events [ 702.309] (**) Option "Device" "/dev/input/event1" [ 702.313] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 702.313] (II) event1 - Power Button: device is a keyboard [ 702.313] (II) event1 - Power Button: device removed [ 702.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 702.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 702.330] (**) Option "xkb_layout" "us" [ 702.330] (WW) Option "xkb_variant" requires a string value [ 702.330] (II) config/udev: removing device Sleep Button [ 702.330] (II) UnloadModule: "libinput" [ 702.330] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 702.330] (**) Sleep Button: Applying InputClass "devname" [ 702.330] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 702.330] (**) Sleep Button: Applying InputClass "system-keyboard" [ 702.330] (II) Using input driver 'libinput' for 'Sleep Button' [ 702.330] (**) Sleep Button: always reports core events [ 702.330] (**) Option "Device" "/dev/input/event0" [ 702.332] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 702.332] (II) event0 - Sleep Button: device is a keyboard [ 702.332] (II) event0 - Sleep Button: device removed [ 702.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 702.356] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10) [ 702.356] (**) Option "xkb_layout" "us" [ 702.356] (WW) Option "xkb_variant" requires a string value [ 702.357] (II) config/udev: Adding input device Logitech ERGO M575 (/dev/input/mouse1) [ 702.357] (**) Logitech ERGO M575: Applying InputClass "devname" [ 702.357] (II) Using input driver 'libinput' for 'Logitech ERGO M575' [ 702.357] (**) Logitech ERGO M575: always reports core events [ 702.357] (**) Option "Device" "/dev/input/mouse1" [ 702.413] (II) mouse1 - not using input device '/dev/input/mouse1'. [ 702.413] (EE) libinput: Logitech ERGO M575: Failed to create a device for /dev/input/mouse1 [ 702.413] (EE) PreInit returned 2 for "Logitech ERGO M575" [ 702.413] (II) UnloadModule: "libinput" [ 702.414] (II) config/udev: Adding input device Keychron Keychron C3 Pro Mouse (/dev/input/mouse0) [ 702.414] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "devname" [ 702.414] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Mouse' [ 702.414] (**) Keychron Keychron C3 Pro Mouse: always reports core events [ 702.414] (**) Option "Device" "/dev/input/mouse0" [ 702.460] (II) mouse0 - not using input device '/dev/input/mouse0'. [ 702.460] (EE) libinput: Keychron Keychron C3 Pro Mouse: Failed to create a device for /dev/input/mouse0 [ 702.460] (EE) PreInit returned 2 for "Keychron Keychron C3 Pro Mouse" [ 702.460] (II) UnloadModule: "libinput" [ 702.460] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event11) [ 702.460] (**) HDA NVidia HDMI/DP,pcm=3: Applying InputClass "devname" [ 702.460] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=3' [ 702.460] (**) HDA NVidia HDMI/DP,pcm=3: always reports core events [ 702.460] (**) Option "Device" "/dev/input/event11" [ 702.461] (II) event11 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch [ 702.500] (II) event11 - not using input device '/dev/input/event11'. [ 702.500] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event11 [ 702.500] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=3" [ 702.500] (II) UnloadModule: "libinput" [ 702.500] (II) config/udev: removing device Keychron Keychron C3 Pro Mouse [ 702.500] (II) UnloadModule: "libinput" [ 702.500] (II) config/udev: Adding input device Keychron Keychron C3 Pro Mouse (/dev/input/event4) [ 702.500] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "devname" [ 702.500] (**) Keychron Keychron C3 Pro Mouse: Applying InputClass "libinput pointer catchall" [ 702.500] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Mouse' [ 702.500] (**) Keychron Keychron C3 Pro Mouse: always reports core events [ 702.500] (**) Option "Device" "/dev/input/event4" [ 702.502] (II) event4 - Keychron Keychron C3 Pro Mouse: is tagged by udev as: Mouse [ 702.502] (II) event4 - Keychron Keychron C3 Pro Mouse: device is a pointer [ 702.502] (II) event4 - Keychron Keychron C3 Pro Mouse: device removed [ 702.533] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.533] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.533] (II) libinput: Keychron Keychron C3 Pro Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input7/event4" [ 702.533] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Mouse" (type: MOUSE, id 13) [ 702.533] (**) Option "AccelerationScheme" "none" [ 702.533] (**) Keychron Keychron C3 Pro Mouse: (accel) selected scheme none/0 [ 702.533] (**) Keychron Keychron C3 Pro Mouse: (accel) acceleration factor: 2.000 [ 702.533] (**) Keychron Keychron C3 Pro Mouse: (accel) acceleration threshold: 4 [ 702.533] (II) config/udev: removing device Keychron Keychron C3 Pro Keyboard [ 702.533] (II) UnloadModule: "libinput" [ 702.534] (II) config/udev: Adding input device Keychron Keychron C3 Pro Keyboard (/dev/input/event7) [ 702.534] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "devname" [ 702.534] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "libinput keyboard catchall" [ 702.534] (**) Keychron Keychron C3 Pro Keyboard: Applying InputClass "system-keyboard" [ 702.534] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Keyboard' [ 702.534] (**) Keychron Keychron C3 Pro Keyboard: always reports core events [ 702.534] (**) Option "Device" "/dev/input/event7" [ 702.535] (II) event7 - Keychron Keychron C3 Pro Keyboard: is tagged by udev as: Keyboard [ 702.535] (II) event7 - Keychron Keychron C3 Pro Keyboard: device is a keyboard [ 702.536] (II) event7 - Keychron Keychron C3 Pro Keyboard: device removed [ 702.553] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input10/event7" [ 702.553] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Keyboard" (type: KEYBOARD, id 12) [ 702.553] (**) Option "xkb_layout" "us" [ 702.553] (WW) Option "xkb_variant" requires a string value [ 702.553] (II) config/udev: removing device Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control [ 702.553] (II) UnloadModule: "libinput" [ 702.554] (II) config/udev: Adding input device Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control (/dev/input/event12) [ 702.554] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "devname" [ 702.554] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 702.554] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: Applying InputClass "system-keyboard" [ 702.554] (II) Using input driver 'libinput' for 'Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control' [ 702.554] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: always reports core events [ 702.554] (**) Option "Device" "/dev/input/event12" [ 702.555] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: is tagged by udev as: Keyboard [ 702.555] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device is a keyboard [ 702.555] (II) event12 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control: device removed [ 702.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:3537:0575.0007/input/input16/event12" [ 702.573] (II) XINPUT: Adding extended input device "Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 Consumer Control" (type: KEYBOARD, id 17) [ 702.573] (**) Option "xkb_layout" "us" [ 702.573] (WW) Option "xkb_variant" requires a string value [ 702.573] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14) [ 702.573] (**) HDA NVidia HDMI/DP,pcm=7: Applying InputClass "devname" [ 702.573] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=7' [ 702.573] (**) HDA NVidia HDMI/DP,pcm=7: always reports core events [ 702.573] (**) Option "Device" "/dev/input/event14" [ 702.574] (II) event14 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch [ 702.613] (II) event14 - not using input device '/dev/input/event14'. [ 702.613] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event14 [ 702.613] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=7" [ 702.613] (II) UnloadModule: "libinput" [ 702.613] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15) [ 702.613] (**) HDA NVidia HDMI/DP,pcm=8: Applying InputClass "devname" [ 702.613] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=8' [ 702.613] (**) HDA NVidia HDMI/DP,pcm=8: always reports core events [ 702.613] (**) Option "Device" "/dev/input/event15" [ 702.614] (II) event15 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch [ 702.670] (II) event15 - not using input device '/dev/input/event15'. [ 702.670] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event15 [ 702.670] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=8" [ 702.670] (II) UnloadModule: "libinput" [ 702.670] (II) config/udev: removing device Logitech ERGO M575 [ 702.670] (II) UnloadModule: "libinput" [ 702.671] (II) config/udev: Adding input device Logitech ERGO M575 (/dev/input/event8) [ 702.671] (**) Logitech ERGO M575: Applying InputClass "devname" [ 702.671] (**) Logitech ERGO M575: Applying InputClass "libinput pointer catchall" [ 702.671] (II) Using input driver 'libinput' for 'Logitech ERGO M575' [ 702.671] (**) Logitech ERGO M575: always reports core events [ 702.671] (**) Option "Device" "/dev/input/event8" [ 702.672] (II) event8 - Logitech ERGO M575: is tagged by udev as: Mouse [ 702.672] (II) event8 - Logitech ERGO M575: device is a pointer [ 702.672] (II) event8 - Logitech ERGO M575: device removed [ 702.686] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.686] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.686] (II) libinput: Logitech ERGO M575: Step value 0 was provided, libinput Fallback acceleration function is used. [ 702.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.2/1-10.2:1.2/0003:046D:C52B.0006/0003:046D:4096.0009/input/input23/event8" [ 702.686] (II) XINPUT: Adding extended input device "Logitech ERGO M575" (type: MOUSE, id 16) [ 702.686] (**) Option "AccelerationScheme" "none" [ 702.686] (**) Logitech ERGO M575: (accel) selected scheme none/0 [ 702.686] (**) Logitech ERGO M575: (accel) acceleration factor: 2.000 [ 702.686] (**) Logitech ERGO M575: (accel) acceleration threshold: 4 [ 702.687] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16) [ 702.687] (**) HDA NVidia HDMI/DP,pcm=9: Applying InputClass "devname" [ 702.687] (II) Using input driver 'libinput' for 'HDA NVidia HDMI/DP,pcm=9' [ 702.687] (**) HDA NVidia HDMI/DP,pcm=9: always reports core events [ 702.687] (**) Option "Device" "/dev/input/event16" [ 702.687] (II) event16 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch [ 702.726] (II) event16 - not using input device '/dev/input/event16'. [ 702.726] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event16 [ 702.726] (EE) PreInit returned 2 for "HDA NVidia HDMI/DP,pcm=9" [ 702.726] (II) UnloadModule: "libinput" [ 702.726] (II) config/udev: removing device Keychron Keychron C3 Pro System Control [ 702.726] (II) UnloadModule: "libinput" [ 702.727] (II) config/udev: Adding input device Keychron Keychron C3 Pro System Control (/dev/input/event5) [ 702.727] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "devname" [ 702.727] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "libinput keyboard catchall" [ 702.727] (**) Keychron Keychron C3 Pro System Control: Applying InputClass "system-keyboard" [ 702.727] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro System Control' [ 702.727] (**) Keychron Keychron C3 Pro System Control: always reports core events [ 702.727] (**) Option "Device" "/dev/input/event5" [ 702.728] (II) event5 - Keychron Keychron C3 Pro System Control: is tagged by udev as: Keyboard Joystick [ 702.728] (II) event5 - Keychron Keychron C3 Pro System Control: device is a keyboard [ 702.728] (II) event5 - Keychron Keychron C3 Pro System Control: device removed [ 702.753] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input8/event5" [ 702.753] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro System Control" (type: KEYBOARD, id 14) [ 702.753] (**) Option "xkb_layout" "us" [ 702.753] (WW) Option "xkb_variant" requires a string value [ 702.753] (II) config/udev: removing device Keychron Keychron C3 Pro [ 702.753] (II) UnloadModule: "libinput" [ 702.754] (II) config/udev: Adding input device Keychron Keychron C3 Pro (/dev/input/event3) [ 702.754] (**) Keychron Keychron C3 Pro: Applying InputClass "devname" [ 702.754] (**) Keychron Keychron C3 Pro: Applying InputClass "libinput keyboard catchall" [ 702.754] (**) Keychron Keychron C3 Pro: Applying InputClass "system-keyboard" [ 702.754] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro' [ 702.754] (**) Keychron Keychron C3 Pro: always reports core events [ 702.754] (**) Option "Device" "/dev/input/event3" [ 702.755] (II) event3 - Keychron Keychron C3 Pro: is tagged by udev as: Keyboard [ 702.755] (II) event3 - Keychron Keychron C3 Pro: device is a keyboard [ 702.755] (II) event3 - Keychron Keychron C3 Pro: device removed [ 702.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:3434:0430.0001/input/input6/event3" [ 702.793] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro" (type: KEYBOARD, id 11) [ 702.793] (**) Option "xkb_layout" "us" [ 702.793] (WW) Option "xkb_variant" requires a string value [ 702.793] (II) config/udev: removing device Keychron Keychron C3 Pro Consumer Control [ 702.793] (II) UnloadModule: "libinput" [ 702.793] (II) config/udev: removing device Keychron Keychron C3 Pro Consumer Control [ 702.793] (II) UnloadModule: "libinput" [ 702.794] (II) config/udev: Adding input device Keychron Keychron C3 Pro Consumer Control (/dev/input/event6) [ 702.794] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "devname" [ 702.794] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "libinput keyboard catchall" [ 702.794] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "system-keyboard" [ 702.794] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Consumer Control' [ 702.794] (**) Keychron Keychron C3 Pro Consumer Control: always reports core events [ 702.794] (**) Option "Device" "/dev/input/event6" [ 702.795] (II) event6 - Keychron Keychron C3 Pro Consumer Control: is tagged by udev as: Keyboard [ 702.795] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device is a keyboard [ 702.795] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device removed [ 702.813] (II) libinput: Keychron Keychron C3 Pro Consumer Control: needs a virtual subdevice [ 702.813] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input9/event6" [ 702.813] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Consumer Control" (type: MOUSE, id 15) [ 702.813] (**) Option "AccelerationScheme" "none" [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: (accel) selected scheme none/0 [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: (accel) acceleration factor: 2.000 [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: (accel) acceleration threshold: 4 [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "devname" [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "libinput keyboard catchall" [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: Applying InputClass "system-keyboard" [ 702.813] (II) Using input driver 'libinput' for 'Keychron Keychron C3 Pro Consumer Control' [ 702.813] (**) Keychron Keychron C3 Pro Consumer Control: always reports core events [ 702.813] (**) Option "Device" "/dev/input/event6" [ 702.813] (II) libinput: Keychron Keychron C3 Pro Consumer Control: is a virtual subdevice [ 702.813] (EE) libinput: Keychron Keychron C3 Pro Consumer Control: Parent device not available [ 702.814] (II) event6 - Keychron Keychron C3 Pro Consumer Control: is tagged by udev as: Keyboard [ 702.814] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device is a keyboard [ 702.814] (II) event6 - Keychron Keychron C3 Pro Consumer Control: device removed [ 702.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:3434:0430.0003/input/input9/event6" [ 702.830] (II) XINPUT: Adding extended input device "Keychron Keychron C3 Pro Consumer Control" (type: KEYBOARD, id 19) [ 702.830] (**) Option "xkb_layout" "us" [ 702.830] (WW) Option "xkb_variant" requires a string value [ 702.830] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19) [ 702.830] (**) HDA Intel PCH Mic: Applying InputClass "devname" [ 702.830] (II) Using input driver 'libinput' for 'HDA Intel PCH Mic' [ 702.830] (**) HDA Intel PCH Mic: always reports core events [ 702.830] (**) Option "Device" "/dev/input/event19" [ 702.830] (II) event19 - HDA Intel PCH Mic: is tagged by udev as: Switch [ 702.869] (II) event19 - not using input device '/dev/input/event19'. [ 702.870] (EE) libinput: HDA Intel PCH Mic: Failed to create a device for /dev/input/event19 [ 702.870] (EE) PreInit returned 2 for "HDA Intel PCH Mic" [ 702.870] (II) UnloadModule: "libinput" [ 702.870] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event21) [ 702.870] (**) HDA Intel PCH Line Out: Applying InputClass "devname" [ 702.870] (II) Using input driver 'libinput' for 'HDA Intel PCH Line Out' [ 702.870] (**) HDA Intel PCH Line Out: always reports core events [ 702.870] (**) Option "Device" "/dev/input/event21" [ 702.870] (II) event21 - HDA Intel PCH Line Out: is tagged by udev as: Switch [ 702.903] (II) event21 - not using input device '/dev/input/event21'. [ 702.903] (EE) libinput: HDA Intel PCH Line Out: Failed to create a device for /dev/input/event21 [ 702.903] (EE) PreInit returned 2 for "HDA Intel PCH Line Out" [ 702.903] (II) UnloadModule: "libinput" [ 702.903] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event23) [ 702.903] (**) HDA Intel PCH Front Headphone: Applying InputClass "devname" [ 702.903] (II) Using input driver 'libinput' for 'HDA Intel PCH Front Headphone' [ 702.903] (**) HDA Intel PCH Front Headphone: always reports core events [ 702.903] (**) Option "Device" "/dev/input/event23" [ 702.904] (II) event23 - HDA Intel PCH Front Headphone: is tagged by udev as: Switch [ 702.949] (II) event23 - not using input device '/dev/input/event23'. [ 702.950] (EE) libinput: HDA Intel PCH Front Headphone: Failed to create a device for /dev/input/event23 [ 702.950] (EE) PreInit returned 2 for "HDA Intel PCH Front Headphone" [ 702.950] (II) UnloadModule: "libinput" [ 702.950] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event22) [ 702.950] (**) HDA Intel PCH Front Headphone: Applying InputClass "devname" [ 702.950] (II) Using input driver 'libinput' for 'HDA Intel PCH Front Headphone' [ 702.950] (**) HDA Intel PCH Front Headphone: always reports core events [ 702.950] (**) Option "Device" "/dev/input/event22" [ 702.950] (II) event22 - HDA Intel PCH Front Headphone: is tagged by udev as: Switch [ 702.986] (II) event22 - not using input device '/dev/input/event22'. [ 702.986] (EE) libinput: HDA Intel PCH Front Headphone: Failed to create a device for /dev/input/event22 [ 702.986] (EE) PreInit returned 2 for "HDA Intel PCH Front Headphone" [ 702.986] (II) UnloadModule: "libinput" [ 702.986] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event25) [ 702.986] (**) HDA Intel PCH HDMI/DP,pcm=7: Applying InputClass "devname" [ 702.986] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=7' [ 702.986] (**) HDA Intel PCH HDMI/DP,pcm=7: always reports core events [ 702.986] (**) Option "Device" "/dev/input/event25" [ 702.987] (II) event25 - HDA Intel PCH HDMI/DP,pcm=7: is tagged by udev as: Switch [ 703.030] (II) event25 - not using input device '/dev/input/event25'. [ 703.030] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=7: Failed to create a device for /dev/input/event25 [ 703.030] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=7" [ 703.030] (II) UnloadModule: "libinput" [ 703.030] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event20) [ 703.030] (**) HDA Intel PCH Line: Applying InputClass "devname" [ 703.030] (II) Using input driver 'libinput' for 'HDA Intel PCH Line' [ 703.030] (**) HDA Intel PCH Line: always reports core events [ 703.030] (**) Option "Device" "/dev/input/event20" [ 703.031] (II) event20 - HDA Intel PCH Line: is tagged by udev as: Switch [ 703.070] (II) event20 - not using input device '/dev/input/event20'. [ 703.070] (EE) libinput: HDA Intel PCH Line: Failed to create a device for /dev/input/event20 [ 703.070] (EE) PreInit returned 2 for "HDA Intel PCH Line" [ 703.070] (II) UnloadModule: "libinput" [ 703.070] (II) config/udev: Adding input device Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2 (/dev/input/event13) [ 703.070] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: Applying InputClass "devname" [ 703.070] (II) Using input driver 'libinput' for 'Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2' [ 703.070] (**) Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: always reports core events [ 703.070] (**) Option "Device" "/dev/input/event13" [ 703.071] (II) event13 - Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: not tagged as supported input device [ 703.110] (II) event13 - not using input device '/dev/input/event13'. [ 703.110] (EE) libinput: Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2: Failed to create a device for /dev/input/event13 [ 703.110] (EE) PreInit returned 2 for "Guangzhou Chicken Run Network Technology Co., Ltd. GameSir-Cyclone 2" [ 703.110] (II) UnloadModule: "libinput" [ 703.110] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event24) [ 703.110] (**) HDA Intel PCH HDMI/DP,pcm=3: Applying InputClass "devname" [ 703.110] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=3' [ 703.110] (**) HDA Intel PCH HDMI/DP,pcm=3: always reports core events [ 703.110] (**) Option "Device" "/dev/input/event24" [ 703.111] (II) event24 - HDA Intel PCH HDMI/DP,pcm=3: is tagged by udev as: Switch [ 703.183] (II) event24 - not using input device '/dev/input/event24'. [ 703.183] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=3: Failed to create a device for /dev/input/event24 [ 703.183] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=3" [ 703.183] (II) UnloadModule: "libinput" [ 703.183] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event26) [ 703.183] (**) HDA Intel PCH HDMI/DP,pcm=8: Applying InputClass "devname" [ 703.183] (II) Using input driver 'libinput' for 'HDA Intel PCH HDMI/DP,pcm=8' [ 703.183] (**) HDA Intel PCH HDMI/DP,pcm=8: always reports core events [ 703.183] (**) Option "Device" "/dev/input/event26" [ 703.184] (II) event26 - HDA Intel PCH HDMI/DP,pcm=8: is tagged by udev as: Switch [ 703.223] (II) event26 - not using input device '/dev/input/event26'. [ 703.223] (EE) libinput: HDA Intel PCH HDMI/DP,pcm=8: Failed to create a device for /dev/input/event26 [ 703.223] (EE) PreInit returned 2 for "HDA Intel PCH HDMI/DP,pcm=8" [ 703.223] (II) UnloadModule: "libinput" [ 703.223] (II) config/udev: Adding input device PC Speaker (/dev/input/event9) [ 703.223] (**) PC Speaker: Applying InputClass "devname" [ 703.223] (II) Using input driver 'libinput' for 'PC Speaker' [ 703.223] (**) PC Speaker: always reports core events [ 703.223] (**) Option "Device" "/dev/input/event9" [ 703.224] (II) event9 - PC Speaker: not tagged as supported input device [ 703.266] (II) event9 - not using input device '/dev/input/event9'. [ 703.266] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event9 [ 703.266] (EE) PreInit returned 2 for "PC Speaker" [ 703.266] (II) UnloadModule: "libinput" [ 703.267] (II) config/udev: removing device HP WMI hotkeys [ 703.267] (II) UnloadModule: "libinput" [ 703.267] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10) [ 703.267] (**) HP WMI hotkeys: Applying InputClass "devname" [ 703.267] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 703.267] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 703.267] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 703.267] (**) HP WMI hotkeys: always reports core events [ 703.267] (**) Option "Device" "/dev/input/event10" [ 703.268] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 703.268] (II) event10 - HP WMI hotkeys: device is a keyboard [ 703.268] (II) event10 - HP WMI hotkeys: device removed [ 703.293] (**) Option "config_info" "udev:/sys/devices/virtual/input/input25/event10" [ 703.293] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 18) [ 703.293] (**) Option "xkb_layout" "us" [ 703.293] (WW) Option "xkb_variant" requires a string value