[ 1.937] (--) Log file renamed from "/var/log/Xorg.pid-499.log" to "/var/log/Xorg.0.log" [ 1.939] X.Org X Server 1.21.1.2 X Protocol Version 11, Revision 0 [ 1.939] Current Operating System: Linux XXX 5.15.10-arch1-1 #1 SMP PREEMPT Fri, 17 Dec 2021 11:17:37 +0000 x86_64 [ 1.939] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=HASH_99F-E58A-1713-0037-DDAFDF6058D2 rw loglevel=3 quiet [ 1.939] [ 1.939] Current version of pixman: 0.40.0 [ 1.939] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1.939] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1.939] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 18 20:52:56 2021 [ 1.940] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 1.940] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1.941] (==) No Layout section. Using the first Screen section. [ 1.941] (==) No screen section available. Using defaults. [ 1.941] (**) |-->Screen "Default Screen Section" (0) [ 1.941] (**) | |-->Monitor "<default monitor>" [ 1.941] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 1.941] (==) Automatically adding devices [ 1.941] (==) Automatically enabling devices [ 1.941] (==) Automatically adding GPU devices [ 1.941] (==) Automatically binding GPU devices [ 1.941] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 1.942] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 1.942] Entry deleted from font path. [ 1.942] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 1.942] Entry deleted from font path. [ 1.942] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 1.942] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 1.942] Entry deleted from font path. [ 1.942] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 1.942] Entry deleted from font path. [ 1.942] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 1.942] Entry deleted from font path. [ 1.942] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 1.942] Entry deleted from font path. [ 1.942] (==) FontPath set to: [ 1.942] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1.942] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1.942] (II) Module ABI versions: [ 1.942] X.Org ANSI C Emulation: 0.4 [ 1.942] X.Org Video Driver: 25.2 [ 1.942] X.Org XInput driver : 24.4 [ 1.942] X.Org Server Extension : 10.0 [ 1.942] (++) using VT number 1 [ 1.942] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 1.943] (II) xfree86: Adding drm device (/dev/dri/card0) [ 1.943] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 [ 1.943] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 1.943] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 1.943] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU [ 1.943] (--) PCI:*(1@0:0:0) 10de:2489:10de:153c rev 161, Mem @ 0xa2000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072 [ 1.943] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 1.943] (II) LoadModule: "glx" [ 1.946] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1.951] (II) Module glx: vendor="X.Org Foundation" [ 1.951] compiled for 1.21.1.2, module version = 1.0.0 [ 1.951] ABI class: X.Org Server Extension, version 10.0 [ 1.951] (II) Applying OutputClass "nvidia" to /dev/dri/card0 [ 1.951] loading driver: nvidia [ 1.951] (II) Applying OutputClass "nvidia" to /dev/dri/card0 [ 1.951] loading driver: nvidia [ 1.951] (==) Matched nvidia as autoconfigured driver 0 [ 1.951] (==) Matched nouveau as autoconfigured driver 1 [ 1.951] (==) Matched nv as autoconfigured driver 2 [ 1.951] (==) Matched modesetting as autoconfigured driver 3 [ 1.951] (==) Matched fbdev as autoconfigured driver 4 [ 1.951] (==) Matched vesa as autoconfigured driver 5 [ 1.951] (==) Assigned the driver to the xf86ConfigLayout [ 1.951] (II) LoadModule: "nvidia" [ 1.951] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 1.955] (II) Module nvidia: vendor="NVIDIA Corporation" [ 1.955] compiled for 1.6.99.901, module version = 1.0.0 [ 1.955] Module class: X.Org Video Driver [ 1.955] (II) LoadModule: "nouveau" [ 1.955] (WW) Warning, couldn't open module nouveau [ 1.955] (EE) Failed to load module "nouveau" (module does not exist, 0) [ 1.955] (II) LoadModule: "nv" [ 1.955] (WW) Warning, couldn't open module nv [ 1.955] (EE) Failed to load module "nv" (module does not exist, 0) [ 1.955] (II) LoadModule: "modesetting" [ 1.956] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 1.959] (II) Module modesetting: vendor="X.Org Foundation" [ 1.959] compiled for 1.21.1.2, module version = 1.21.1 [ 1.959] Module class: X.Org Video Driver [ 1.959] ABI class: X.Org Video Driver, version 25.2 [ 1.959] (II) LoadModule: "fbdev" [ 1.960] (WW) Warning, couldn't open module fbdev [ 1.960] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 1.960] (II) LoadModule: "vesa" [ 1.960] (WW) Warning, couldn't open module vesa [ 1.960] (EE) Failed to load module "vesa" (module does not exist, 0) [ 1.960] (II) NVIDIA dlloader X Driver 495.46 Wed Oct 27 16:28:42 UTC 2021 [ 1.960] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 1.960] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 1.960] (II) Loading sub module "fb" [ 1.960] (II) LoadModule: "fb" [ 1.960] (II) Module "fb" already built-in [ 1.960] (II) Loading sub module "wfb" [ 1.960] (II) LoadModule: "wfb" [ 1.960] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 1.961] (II) Module wfb: vendor="X.Org Foundation" [ 1.961] compiled for 1.21.1.2, module version = 1.0.0 [ 1.961] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1.961] (II) Loading sub module "ramdac" [ 1.961] (II) LoadModule: "ramdac" [ 1.961] (II) Module "ramdac" already built-in [ 2.010] (WW) Falling back to old probe method for modesetting [ 2.010] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 2.010] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 2.010] (==) NVIDIA(0): RGB weight 888 [ 2.010] (==) NVIDIA(0): Default visual is TrueColor [ 2.010] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 2.010] (II) Applying OutputClass "nvidia" options to /dev/dri/card0 [ 2.010] (II) Applying OutputClass "nvidia" options to /dev/dri/card0 [ 2.010] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" [ 2.011] (**) NVIDIA(0): Enabling 2D acceleration [ 2.011] (II) Loading sub module "glxserver_nvidia" [ 2.011] (II) LoadModule: "glxserver_nvidia" [ 2.011] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so [ 2.039] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 2.039] compiled for 1.6.99.901, module version = 1.0.0 [ 2.039] Module class: X.Org Server Extension [ 2.039] (II) NVIDIA GLX Module 495.46 Wed Oct 27 16:26:03 UTC 2021 [ 2.040] (II) NVIDIA: The X server supports PRIME Render Offload. [ 2.876] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0 [ 2.876] (--) NVIDIA(0): DFP-0 [ 2.876] (--) NVIDIA(0): DFP-1 (boot) [ 2.876] (--) NVIDIA(0): DFP-2 [ 2.876] (--) NVIDIA(0): DFP-3 [ 2.876] (--) NVIDIA(0): DFP-4 [ 2.876] (--) NVIDIA(0): DFP-5 [ 2.876] (--) NVIDIA(0): DFP-6 [ 2.876] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 Ti (GA104-A) at PCI:1:0:0 [ 2.876] (II) NVIDIA(0): (GPU-0) [ 2.876] (--) NVIDIA(0): Memory: 8388608 kBytes [ 2.876] (--) NVIDIA(0): VideoBIOS: 94.04.6b.00.61 [ 2.876] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 2.877] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 2.877] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 2.877] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 2.877] (--) NVIDIA(GPU-0): [ 2.877] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): connected [ 2.877] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): Internal DisplayPort [ 2.877] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): 2670.0 MHz maximum pixel clock [ 2.877] (--) NVIDIA(GPU-0): [ 2.879] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 2.879] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 2.879] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 2.879] (--) NVIDIA(GPU-0): [ 2.879] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 2.879] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 2.879] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 2.879] (--) NVIDIA(GPU-0): [ 2.879] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 2.879] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 2.879] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 2.879] (--) NVIDIA(GPU-0): [ 2.879] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 2.879] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 2.879] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 2.879] (--) NVIDIA(GPU-0): [ 2.879] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 2.879] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 2.879] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 2.879] (--) NVIDIA(GPU-0): [ 2.915] (==) NVIDIA(0): [ 2.915] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 2.915] (==) NVIDIA(0): will be used as the requested mode. [ 2.915] (==) NVIDIA(0): [ 2.916] (II) NVIDIA(0): Validated MetaModes: [ 2.916] (II) NVIDIA(0): "DFP-1:nvidia-auto-select" [ 2.916] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080 [ 2.963] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config [ 2.963] (--) NVIDIA(0): option [ 2.963] (II) UnloadModule: "modesetting" [ 2.963] (II) Unloading modesetting [ 2.967] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory [ 2.967] (II) NVIDIA: access. [ 2.968] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 2.968] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 2.968] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 2.968] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 2.968] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 2.968] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 2.968] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 2.968] (II) NVIDIA(0): Config Options in the README. [ 2.980] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select" [ 3.096] (==) NVIDIA(0): Disabling shared memory pixmaps [ 3.096] (==) NVIDIA(0): Backing store enabled [ 3.096] (==) NVIDIA(0): Silken mouse enabled [ 3.097] (==) NVIDIA(0): DPMS enabled [ 3.097] (WW) NVIDIA(0): Option "PrimaryGPU" is not used [ 3.097] (II) Loading sub module "dri2" [ 3.097] (II) LoadModule: "dri2" [ 3.097] (II) Module "dri2" already built-in [ 3.097] (II) NVIDIA(0): [DRI2] Setup complete [ 3.097] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 3.097] (II) Initializing extension Generic Event Extension [ 3.097] (II) Initializing extension SHAPE [ 3.097] (II) Initializing extension MIT-SHM [ 3.097] (II) Initializing extension XInputExtension [ 3.097] (II) Initializing extension XTEST [ 3.097] (II) Initializing extension BIG-REQUESTS [ 3.098] (II) Initializing extension SYNC [ 3.098] (II) Initializing extension XKEYBOARD [ 3.098] (II) Initializing extension XC-MISC [ 3.098] (II) Initializing extension SECURITY [ 3.098] (II) Initializing extension XFIXES [ 3.098] (II) Initializing extension RENDER [ 3.098] (II) Initializing extension RANDR [ 3.098] (II) Initializing extension COMPOSITE [ 3.098] (II) Initializing extension DAMAGE [ 3.098] (II) Initializing extension MIT-SCREEN-SAVER [ 3.098] (II) Initializing extension DOUBLE-BUFFER [ 3.098] (II) Initializing extension RECORD [ 3.098] (II) Initializing extension DPMS [ 3.098] (II) Initializing extension Present [ 3.098] (II) Initializing extension DRI3 [ 3.098] (II) Initializing extension X-Resource [ 3.098] (II) Initializing extension XVideo [ 3.098] (II) Initializing extension XVideo-MotionCompensation [ 3.098] (II) Initializing extension GLX [ 3.098] (II) Initializing extension GLX [ 3.098] (II) Indirect GLX disabled. [ 3.098] (II) GLX: Another vendor is already registered for screen 0 [ 3.098] (II) Initializing extension XFree86-VidModeExtension [ 3.099] (II) Initializing extension XFree86-DGA [ 3.099] (II) Initializing extension XFree86-DRI [ 3.099] (II) Initializing extension DRI2 [ 3.099] (II) Initializing extension NV-GLX [ 3.099] (II) Initializing extension NV-CONTROL [ 3.099] (II) Initializing extension XINERAMA [ 3.173] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 3.173] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 3.173] (II) LoadModule: "libinput" [ 3.173] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 3.175] (II) Module libinput: vendor="X.Org Foundation" [ 3.175] compiled for 1.21.1, module version = 1.2.0 [ 3.175] Module class: X.Org XInput Driver [ 3.175] ABI class: X.Org XInput driver, version 24.4 [ 3.175] (II) Using input driver 'libinput' for 'Power Button' [ 3.175] (**) Power Button: always reports core events [ 3.175] (**) Option "Device" "/dev/input/event2" [ 3.175] (**) Option "_source" "server/udev" [ 3.179] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 3.179] (II) event2 - Power Button: device is a keyboard [ 3.179] (II) event2 - Power Button: device removed [ 3.223] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 3.223] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 3.225] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 3.225] (II) event2 - Power Button: device is a keyboard [ 3.226] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 3.226] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 3.226] (II) Using input driver 'libinput' for 'Power Button' [ 3.226] (**) Power Button: always reports core events [ 3.226] (**) Option "Device" "/dev/input/event1" [ 3.226] (**) Option "_source" "server/udev" [ 3.228] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 3.228] (II) event1 - Power Button: device is a keyboard [ 3.228] (II) event1 - Power Button: device removed [ 3.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 3.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 3.278] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 3.278] (II) event1 - Power Button: device is a keyboard [ 3.280] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 3.280] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 3.280] (II) Using input driver 'libinput' for 'Sleep Button' [ 3.280] (**) Sleep Button: always reports core events [ 3.280] (**) Option "Device" "/dev/input/event0" [ 3.280] (**) Option "_source" "server/udev" [ 3.281] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 3.281] (II) event0 - Sleep Button: device is a keyboard [ 3.282] (II) event0 - Sleep Button: device removed [ 3.306] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 3.306] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 3.307] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 3.307] (II) event0 - Sleep Button: device is a keyboard [ 3.307] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event10) [ 3.307] (II) No input driver specified, ignoring this device. [ 3.307] (II) This device may have been added with another device file. [ 3.307] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event4) [ 3.307] (II) No input driver specified, ignoring this device. [ 3.307] (II) This device may have been added with another device file. [ 3.307] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event5) [ 3.307] (II) No input driver specified, ignoring this device. [ 3.307] (II) This device may have been added with another device file. [ 3.308] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6) [ 3.308] (II) No input driver specified, ignoring this device. [ 3.308] (II) This device may have been added with another device file. [ 3.309] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7) [ 3.309] (II) No input driver specified, ignoring this device. [ 3.309] (II) This device may have been added with another device file. [ 3.309] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event8) [ 3.309] (II) No input driver specified, ignoring this device. [ 3.309] (II) This device may have been added with another device file. [ 3.310] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event9) [ 3.310] (II) No input driver specified, ignoring this device. [ 3.310] (II) This device may have been added with another device file. [ 3.312] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/event25) [ 3.312] (**) ASRock LED Controller: Applying InputClass "libinput keyboard catchall" [ 3.312] (II) Using input driver 'libinput' for 'ASRock LED Controller' [ 3.312] (**) ASRock LED Controller: always reports core events [ 3.312] (**) Option "Device" "/dev/input/event25" [ 3.312] (**) Option "_source" "server/udev" [ 3.315] (II) event25 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick [ 3.315] (II) event25 - ASRock LED Controller: device is a keyboard [ 3.315] (II) event25 - ASRock LED Controller: device removed [ 3.356] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:26CE:01A2.0007/input/input26/event25" [ 3.357] (II) XINPUT: Adding extended input device "ASRock LED Controller" (type: KEYBOARD, id 9) [ 3.359] (II) event25 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick [ 3.360] (II) event25 - ASRock LED Controller: device is a keyboard [ 3.362] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/js0) [ 3.362] (II) No input driver specified, ignoring this device. [ 3.362] (II) This device may have been added with another device file. [ 3.363] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core (/dev/input/event16) [ 3.363] (**) Kingston HyperX Alloy Origins Core: Applying InputClass "libinput keyboard catchall" [ 3.363] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core' [ 3.363] (**) Kingston HyperX Alloy Origins Core: always reports core events [ 3.363] (**) Option "Device" "/dev/input/event16" [ 3.363] (**) Option "_source" "server/udev" [ 3.366] (II) event16 - Kingston HyperX Alloy Origins Core: is tagged by udev as: Keyboard [ 3.366] (II) event16 - Kingston HyperX Alloy Origins Core: device is a keyboard [ 3.367] (II) event16 - Kingston HyperX Alloy Origins Core: device removed [ 3.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0951:16E6.0001/input/input16/event16" [ 3.410] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core" (type: KEYBOARD, id 10) [ 3.413] (II) event16 - Kingston HyperX Alloy Origins Core: is tagged by udev as: Keyboard [ 3.413] (II) event16 - Kingston HyperX Alloy Origins Core: device is a keyboard [ 3.415] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Keypad (/dev/input/event17) [ 3.415] (**) Kingston HyperX Alloy Origins Core Keypad: Applying InputClass "libinput keyboard catchall" [ 3.415] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Keypad' [ 3.415] (**) Kingston HyperX Alloy Origins Core Keypad: always reports core events [ 3.415] (**) Option "Device" "/dev/input/event17" [ 3.415] (**) Option "_source" "server/udev" [ 3.419] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: is tagged by udev as: Keyboard [ 3.419] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device is a keyboard [ 3.419] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device removed [ 3.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input17/event17" [ 3.450] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Keypad" (type: KEYBOARD, id 11) [ 3.453] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: is tagged by udev as: Keyboard [ 3.453] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device is a keyboard [ 3.455] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Consumer Control (/dev/input/event18) [ 3.455] (**) Kingston HyperX Alloy Origins Core Consumer Control: Applying InputClass "libinput keyboard catchall" [ 3.455] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Consumer Control' [ 3.455] (**) Kingston HyperX Alloy Origins Core Consumer Control: always reports core events [ 3.455] (**) Option "Device" "/dev/input/event18" [ 3.455] (**) Option "_source" "server/udev" [ 3.458] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: is tagged by udev as: Keyboard [ 3.458] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device is a keyboard [ 3.459] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device removed [ 3.490] (II) libinput: Kingston HyperX Alloy Origins Core Consumer Control: needs a virtual subdevice [ 3.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input18/event18" [ 3.490] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Consumer Control" (type: MOUSE, id 12) [ 3.490] (**) Option "AccelerationScheme" "none" [ 3.490] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) selected scheme none/0 [ 3.490] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) acceleration factor: 2.000 [ 3.490] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) acceleration threshold: 4 [ 3.493] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: is tagged by udev as: Keyboard [ 3.493] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device is a keyboard [ 3.495] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Mouse (/dev/input/event19) [ 3.495] (**) Kingston HyperX Alloy Origins Core Mouse: Applying InputClass "libinput pointer catchall" [ 3.495] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Mouse' [ 3.495] (**) Kingston HyperX Alloy Origins Core Mouse: always reports core events [ 3.495] (**) Option "Device" "/dev/input/event19" [ 3.495] (**) Option "_source" "server/udev" [ 3.498] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: is tagged by udev as: Mouse [ 3.498] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device is a pointer [ 3.499] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device removed [ 3.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input19/event19" [ 3.546] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Mouse" (type: MOUSE, id 13) [ 3.547] (**) Option "AccelerationScheme" "none" [ 3.547] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) selected scheme none/0 [ 3.547] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) acceleration factor: 2.000 [ 3.547] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) acceleration threshold: 4 [ 3.549] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: is tagged by udev as: Mouse [ 3.549] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device is a pointer [ 3.550] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Mouse (/dev/input/mouse0) [ 3.550] (II) No input driver specified, ignoring this device. [ 3.550] (II) This device may have been added with another device file. [ 3.551] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core (/dev/input/event20) [ 3.551] (II) No input driver specified, ignoring this device. [ 3.551] (II) This device may have been added with another device file. [ 3.552] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11) [ 3.552] (II) No input driver specified, ignoring this device. [ 3.552] (II) This device may have been added with another device file. [ 3.552] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12) [ 3.552] (II) No input driver specified, ignoring this device. [ 3.552] (II) This device may have been added with another device file. [ 3.553] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13) [ 3.553] (II) No input driver specified, ignoring this device. [ 3.553] (II) This device may have been added with another device file. [ 3.553] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14) [ 3.553] (II) No input driver specified, ignoring this device. [ 3.553] (II) This device may have been added with another device file. [ 3.553] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15) [ 3.553] (II) No input driver specified, ignoring this device. [ 3.553] (II) This device may have been added with another device file. [ 3.554] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 3.554] (II) No input driver specified, ignoring this device. [ 3.554] (II) This device may have been added with another device file. [ 3.558] (**) Kingston HyperX Alloy Origins Core Consumer Control: Applying InputClass "libinput keyboard catchall" [ 3.558] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Consumer Control' [ 3.558] (**) Kingston HyperX Alloy Origins Core Consumer Control: always reports core events [ 3.558] (**) Option "Device" "/dev/input/event18" [ 3.558] (**) Option "_source" "_driver/libinput" [ 3.558] (II) libinput: Kingston HyperX Alloy Origins Core Consumer Control: is a virtual subdevice [ 3.558] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input18/event18" [ 3.558] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Consumer Control" (type: KEYBOARD, id 14) [ 3.559] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6) [ 3.559] (II) No input driver specified, ignoring this device. [ 3.559] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device PC Speaker (/dev/input/event3) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event5) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event8) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event9) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event7) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.560] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=12 (/dev/input/event10) [ 3.560] (II) No input driver specified, ignoring this device. [ 3.560] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event4) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12) [ 3.561] (II) No input driver specified, ignoring this device. [ 3.561] (II) This device may have been added with another device file. [ 3.561] (II) config/udev: removing device Kingston HyperX Alloy Origins Core Keypad [ 3.561] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device removed [ 3.610] (II) UnloadModule: "libinput" [ 3.611] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Keypad (/dev/input/event17) [ 3.611] (**) Kingston HyperX Alloy Origins Core Keypad: Applying InputClass "libinput keyboard catchall" [ 3.611] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Keypad' [ 3.611] (**) Kingston HyperX Alloy Origins Core Keypad: always reports core events [ 3.611] (**) Option "Device" "/dev/input/event17" [ 3.611] (**) Option "_source" "server/udev" [ 3.614] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: is tagged by udev as: Keyboard [ 3.614] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device is a keyboard [ 3.614] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device removed [ 3.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input17/event17" [ 3.663] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Keypad" (type: KEYBOARD, id 11) [ 3.666] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: is tagged by udev as: Keyboard [ 3.667] (II) event17 - Kingston HyperX Alloy Origins Core Keypad: device is a keyboard [ 3.668] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core (/dev/input/event20) [ 3.668] (II) No input driver specified, ignoring this device. [ 3.668] (II) This device may have been added with another device file. [ 3.669] (II) config/udev: removing device ASRock LED Controller [ 3.669] (II) event25 - ASRock LED Controller: device removed [ 3.703] (II) UnloadModule: "libinput" [ 3.705] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/event25) [ 3.705] (**) ASRock LED Controller: Applying InputClass "libinput keyboard catchall" [ 3.705] (II) Using input driver 'libinput' for 'ASRock LED Controller' [ 3.705] (**) ASRock LED Controller: always reports core events [ 3.705] (**) Option "Device" "/dev/input/event25" [ 3.705] (**) Option "_source" "server/udev" [ 3.708] (II) event25 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick [ 3.708] (II) event25 - ASRock LED Controller: device is a keyboard [ 3.709] (II) event25 - ASRock LED Controller: device removed [ 3.743] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:26CE:01A2.0007/input/input26/event25" [ 3.743] (II) XINPUT: Adding extended input device "ASRock LED Controller" (type: KEYBOARD, id 9) [ 3.746] (II) event25 - ASRock LED Controller: is tagged by udev as: Keyboard Joystick [ 3.747] (II) event25 - ASRock LED Controller: device is a keyboard [ 3.747] (II) config/udev: removing device Kingston HyperX Alloy Origins Core [ 3.747] (II) event16 - Kingston HyperX Alloy Origins Core: device removed [ 3.783] (II) UnloadModule: "libinput" [ 3.784] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core (/dev/input/event16) [ 3.784] (**) Kingston HyperX Alloy Origins Core: Applying InputClass "libinput keyboard catchall" [ 3.784] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core' [ 3.784] (**) Kingston HyperX Alloy Origins Core: always reports core events [ 3.784] (**) Option "Device" "/dev/input/event16" [ 3.784] (**) Option "_source" "server/udev" [ 3.787] (II) event16 - Kingston HyperX Alloy Origins Core: is tagged by udev as: Keyboard [ 3.787] (II) event16 - Kingston HyperX Alloy Origins Core: device is a keyboard [ 3.788] (II) event16 - Kingston HyperX Alloy Origins Core: device removed [ 3.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:0951:16E6.0001/input/input16/event16" [ 3.810] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core" (type: KEYBOARD, id 10) [ 3.815] (II) event16 - Kingston HyperX Alloy Origins Core: is tagged by udev as: Keyboard [ 3.815] (II) event16 - Kingston HyperX Alloy Origins Core: device is a keyboard [ 3.818] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/js0) [ 3.818] (II) No input driver specified, ignoring this device. [ 3.818] (II) This device may have been added with another device file. [ 3.818] (II) config/udev: removing device Kingston HyperX Alloy Origins Core Consumer Control [ 3.819] (II) UnloadModule: "libinput" [ 3.819] (II) config/udev: removing device Kingston HyperX Alloy Origins Core Consumer Control [ 3.819] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device removed [ 3.863] (II) UnloadModule: "libinput" [ 3.864] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Consumer Control (/dev/input/event18) [ 3.864] (**) Kingston HyperX Alloy Origins Core Consumer Control: Applying InputClass "libinput keyboard catchall" [ 3.864] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Consumer Control' [ 3.864] (**) Kingston HyperX Alloy Origins Core Consumer Control: always reports core events [ 3.864] (**) Option "Device" "/dev/input/event18" [ 3.864] (**) Option "_source" "server/udev" [ 3.867] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: is tagged by udev as: Keyboard [ 3.867] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device is a keyboard [ 3.868] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device removed [ 3.903] (II) libinput: Kingston HyperX Alloy Origins Core Consumer Control: needs a virtual subdevice [ 3.903] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input18/event18" [ 3.903] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Consumer Control" (type: MOUSE, id 12) [ 3.903] (**) Option "AccelerationScheme" "none" [ 3.903] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) selected scheme none/0 [ 3.903] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) acceleration factor: 2.000 [ 3.903] (**) Kingston HyperX Alloy Origins Core Consumer Control: (accel) acceleration threshold: 4 [ 3.906] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: is tagged by udev as: Keyboard [ 3.907] (II) event18 - Kingston HyperX Alloy Origins Core Consumer Control: device is a keyboard [ 3.907] (**) Kingston HyperX Alloy Origins Core Consumer Control: Applying InputClass "libinput keyboard catchall" [ 3.907] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Consumer Control' [ 3.907] (**) Kingston HyperX Alloy Origins Core Consumer Control: always reports core events [ 3.907] (**) Option "Device" "/dev/input/event18" [ 3.907] (**) Option "_source" "_driver/libinput" [ 3.907] (II) libinput: Kingston HyperX Alloy Origins Core Consumer Control: is a virtual subdevice [ 3.908] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input18/event18" [ 3.908] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Consumer Control" (type: KEYBOARD, id 14) [ 3.908] (II) config/udev: removing device Kingston HyperX Alloy Origins Core Mouse [ 3.908] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device removed [ 3.970] (II) UnloadModule: "libinput" [ 3.971] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Mouse (/dev/input/event19) [ 3.971] (**) Kingston HyperX Alloy Origins Core Mouse: Applying InputClass "libinput pointer catchall" [ 3.971] (II) Using input driver 'libinput' for 'Kingston HyperX Alloy Origins Core Mouse' [ 3.971] (**) Kingston HyperX Alloy Origins Core Mouse: always reports core events [ 3.971] (**) Option "Device" "/dev/input/event19" [ 3.971] (**) Option "_source" "server/udev" [ 3.974] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: is tagged by udev as: Mouse [ 3.974] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device is a pointer [ 3.975] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device removed [ 4.060] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:0951:16E6.0002/input/input19/event19" [ 4.060] (II) XINPUT: Adding extended input device "Kingston HyperX Alloy Origins Core Mouse" (type: MOUSE, id 13) [ 4.060] (**) Option "AccelerationScheme" "none" [ 4.061] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) selected scheme none/0 [ 4.061] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) acceleration factor: 2.000 [ 4.061] (**) Kingston HyperX Alloy Origins Core Mouse: (accel) acceleration threshold: 4 [ 4.063] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: is tagged by udev as: Mouse [ 4.064] (II) event19 - Kingston HyperX Alloy Origins Core Mouse: device is a pointer [ 4.065] (II) config/udev: Adding input device Kingston HyperX Alloy Origins Core Mouse (/dev/input/mouse0) [ 4.065] (II) No input driver specified, ignoring this device. [ 4.065] (II) This device may have been added with another device file. [ 4.069] (II) config/udev: Adding input device Logitech G304 (/dev/input/mouse1) [ 4.069] (II) No input driver specified, ignoring this device. [ 4.069] (II) This device may have been added with another device file. [ 4.086] (II) config/udev: Adding input device Logitech G304 (/dev/input/event21) [ 4.086] (**) Logitech G304: Applying InputClass "libinput pointer catchall" [ 4.086] (**) Logitech G304: Applying InputClass "libinput keyboard catchall" [ 4.086] (II) Using input driver 'libinput' for 'Logitech G304' [ 4.086] (**) Logitech G304: always reports core events [ 4.086] (**) Option "Device" "/dev/input/event21" [ 4.086] (**) Option "_source" "server/udev" [ 4.089] (II) event21 - Logitech G304: is tagged by udev as: Keyboard Mouse [ 4.089] (II) event21 - Logitech G304: device is a pointer [ 4.089] (II) event21 - Logitech G304: device is a keyboard [ 4.090] (II) event21 - Logitech G304: device removed [ 4.153] (II) libinput: Logitech G304: needs a virtual subdevice [ 4.153] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C53F.0006/0003:046D:4074.0008/input/input32/event21" [ 4.153] (II) XINPUT: Adding extended input device "Logitech G304" (type: MOUSE, id 15) [ 4.153] (**) Option "AccelerationScheme" "none" [ 4.153] (**) Logitech G304: (accel) selected scheme none/0 [ 4.153] (**) Logitech G304: (accel) acceleration factor: 2.000 [ 4.153] (**) Logitech G304: (accel) acceleration threshold: 4 [ 4.155] (II) event21 - Logitech G304: is tagged by udev as: Keyboard Mouse [ 4.155] (II) event21 - Logitech G304: device is a pointer [ 4.155] (II) event21 - Logitech G304: device is a keyboard [ 4.155] (**) Logitech G304: Applying InputClass "libinput pointer catchall" [ 4.155] (**) Logitech G304: Applying InputClass "libinput keyboard catchall" [ 4.155] (II) Using input driver 'libinput' for 'Logitech G304' [ 4.155] (**) Logitech G304: always reports core events [ 4.155] (**) Option "Device" "/dev/input/event21" [ 4.155] (**) Option "_source" "_driver/libinput" [ 4.155] (II) libinput: Logitech G304: is a virtual subdevice [ 4.155] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.2/0003:046D:C53F.0006/0003:046D:4074.0008/input/input32/event21" [ 4.155] (II) XINPUT: Adding extended input device "Logitech G304" (type: KEYBOARD, id 16) [ 14.191] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 14.191] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 14.191] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 14.191] (--) NVIDIA(GPU-0): [ 14.191] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): connected [ 14.191] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): Internal DisplayPort [ 14.191] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): 2670.0 MHz maximum pixel clock [ 14.191] (--) NVIDIA(GPU-0): [ 14.193] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 14.193] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 14.193] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 14.193] (--) NVIDIA(GPU-0): [ 14.193] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 14.193] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 14.193] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 14.193] (--) NVIDIA(GPU-0): [ 14.193] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 14.193] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 14.193] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 14.193] (--) NVIDIA(GPU-0): [ 14.193] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 14.193] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 14.193] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 14.193] (--) NVIDIA(GPU-0): [ 14.193] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 14.193] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 14.193] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 14.193] (--) NVIDIA(GPU-0): [ 14.693] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 14.693] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 14.693] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 14.693] (--) NVIDIA(GPU-0): [ 14.693] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): connected [ 14.693] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): Internal DisplayPort [ 14.693] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): 2670.0 MHz maximum pixel clock [ 14.693] (--) NVIDIA(GPU-0): [ 14.695] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 14.695] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 14.695] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 14.695] (--) NVIDIA(GPU-0): [ 14.695] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 14.695] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 14.695] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 14.695] (--) NVIDIA(GPU-0): [ 14.695] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 14.695] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 14.695] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 14.695] (--) NVIDIA(GPU-0): [ 14.695] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 14.695] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 14.695] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 14.695] (--) NVIDIA(GPU-0): [ 14.695] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 14.695] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 14.695] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 14.695] (--) NVIDIA(GPU-0): [ 14.727] (II) NVIDIA(0): Setting mode "DP-0: 1920x1080_165 @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}" [ 16.466] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 16.466] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 16.466] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 16.466] (--) NVIDIA(GPU-0): [ 16.466] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): connected [ 16.466] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): Internal DisplayPort [ 16.466] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): 2670.0 MHz maximum pixel clock [ 16.466] (--) NVIDIA(GPU-0): [ 16.468] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 16.468] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 16.468] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 16.468] (--) NVIDIA(GPU-0): [ 16.468] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 16.468] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 16.468] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 16.468] (--) NVIDIA(GPU-0): [ 16.468] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 16.468] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 16.468] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 16.468] (--) NVIDIA(GPU-0): [ 16.468] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 16.468] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 16.468] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 16.468] (--) NVIDIA(GPU-0): [ 16.468] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 16.468] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 16.468] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 16.468] (--) NVIDIA(GPU-0): [ 21.636] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 21.636] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 21.636] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 21.636] (--) NVIDIA(GPU-0): [ 21.636] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): connected [ 21.636] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): Internal DisplayPort [ 21.636] (--) NVIDIA(GPU-0): LHC X240 (DFP-1): 2670.0 MHz maximum pixel clock [ 21.636] (--) NVIDIA(GPU-0): [ 21.638] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 21.638] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 21.638] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 21.638] (--) NVIDIA(GPU-0): [ 21.638] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 21.638] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 21.638] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 21.638] (--) NVIDIA(GPU-0): [ 21.638] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 21.638] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 21.638] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 21.638] (--) NVIDIA(GPU-0): [ 21.638] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 21.638] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 21.638] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 21.638] (--) NVIDIA(GPU-0): [ 21.638] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 21.638] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 21.638] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 21.638] (--) NVIDIA(GPU-0): [ 187.150] (EE) event21 - Logitech G304: client bug: event processing lagging behind by 27ms, your system is too slow [ 187.506] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-1ms), your system is too slow [ 223.050] (WW) NVIDIA: Wait for channel idle timed out. [ 260.082] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-10ms), your system is too slow [ 260.082] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-23ms), your system is too slow [ 436.405] (WW) NVIDIA: Wait for channel idle timed out. [ 587.695] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-4ms), your system is too slow [ 704.266] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-5ms), your system is too slow [ 744.453] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-4ms), your system is too slow [ 764.044] (EE) event21 - Logitech G304: client bug: event processing lagging behind by 30ms, your system is too slow [ 764.467] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-1ms), your system is too slow [ 878.847] (EE) event16 - Kingston HyperX Alloy Origins Core: client bug: event processing lagging behind by 17ms, your system is too slow [ 903.207] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-3ms), your system is too slow [ 903.207] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-16ms), your system is too slow [ 916.217] (EE) event16 - Kingston HyperX Alloy Origins Core: client bug: event processing lagging behind by 17ms, your system is too slow [ 983.411] (EE) event16 - Kingston HyperX Alloy Origins Core: client bug: event processing lagging behind by 24ms, your system is too slow [ 991.100] (EE) event16 - Kingston HyperX Alloy Origins Core: client bug: event processing lagging behind by 23ms, your system is too slow [ 1020.402] (EE) event16 - Kingston HyperX Alloy Origins Core: client bug: event processing lagging behind by 35ms, your system is too slow [ 1020.402] (EE) event16 - Kingston HyperX Alloy Origins Core: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages. [ 1043.800] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-9ms), your system is too slow [ 1043.800] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-22ms), your system is too slow [ 1171.591] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-6ms), your system is too slow [ 1703.075] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-4ms), your system is too slow [ 1703.075] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-17ms), your system is too slow [ 1704.903] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-5ms), your system is too slow [ 1986.120] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-5ms), your system is too slow [ 1988.055] (EE) event21 - Logitech G304: client bug: event processing lagging behind by 15ms, your system is too slow [ 1988.265] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-14ms), your system is too slow [ 1988.266] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-27ms), your system is too slow [ 2078.649] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-11ms), your system is too slow [ 2203.874] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-8ms), your system is too slow [ 2211.310] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-2ms), your system is too slow [ 2211.311] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-15ms), your system is too slow [ 2212.096] (EE) client bug: timer event21 debounce: scheduled expiry is in the past (-14ms), your system is too slow [ 2212.096] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-27ms), your system is too slow [ 2250.111] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-9ms), your system is too slow [ 2469.221] (EE) event21 - Logitech G304: client bug: event processing lagging behind by 14ms, your system is too slow [ 2486.342] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-0ms), your system is too slow [ 3129.307] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-2ms), your system is too slow [ 3134.427] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-12ms), your system is too slow [ 3169.269] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-0ms), your system is too slow [ 3414.330] (EE) event21 - Logitech G304: client bug: event processing lagging behind by 13ms, your system is too slow [ 3414.330] (EE) event21 - Logitech G304: WARNING: log rate limit exceeded (5 msgs per 60min). Discarding future messages. [ 3417.536] (EE) client bug: timer event21 debounce short: scheduled expiry is in the past (-4ms), your system is too slow