[ 9.156] (--) Log file renamed from "/var/log/Xorg.pid-861.log" to "/var/log/Xorg.0.log" [ 9.157] X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 [ 9.157] Current Operating System: Linux XXX 6.10.6-3-cachyos #1 SMP PREEMPT_DYNAMIC Wed, 21 Aug 2024 15:17:50 +0000 x86_64 [ 9.157] Kernel command line: initrd=\initramfs-linux-cachyos.img root=PARTUUID=HASH_59F-1900-A84F-9D0D-CB51C3887349 rw rootflags=subvol=/@ zswap.enabled=0 nowatchdog splash [ 9.157] [ 9.157] Current version of pixman: 0.43.4 [ 9.157] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.157] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.157] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 22 22:24:33 2024 [ 9.158] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 9.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.158] (==) No Layout section. Using the first Screen section. [ 9.158] (==) No screen section available. Using defaults. [ 9.158] (**) |-->Screen "Default Screen Section" (0) [ 9.158] (**) | |-->Monitor "<default monitor>" [ 9.158] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.158] (**) Allowing byte-swapped clients [ 9.158] (==) Automatically adding devices [ 9.158] (==) Automatically enabling devices [ 9.158] (==) Automatically adding GPU devices [ 9.158] (==) Automatically binding GPU devices [ 9.158] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 9.158] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 9.158] Entry deleted from font path. [ 9.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 9.159] Entry deleted from font path. [ 9.159] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 9.159] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF". [ 9.159] Entry deleted from font path. [ 9.159] (Run 'mkfontdir' on "/usr/share/fonts/OTF"). [ 9.159] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 9.159] Entry deleted from font path. [ 9.159] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 9.159] Entry deleted from font path. [ 9.159] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 9.159] Entry deleted from font path. [ 9.159] (==) FontPath set to: [ 9.159] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.159] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.159] (II) Module ABI versions: [ 9.159] X.Org ANSI C Emulation: 0.4 [ 9.159] X.Org Video Driver: 25.2 [ 9.159] X.Org XInput driver : 24.4 [ 9.159] X.Org Server Extension : 10.0 [ 9.159] (++) using VT number 2 [ 9.159] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.160] (II) xfree86: Adding drm device (/dev/dri/card0) [ 9.160] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card0 [ 9.172] (II) xfree86: Adding drm device (/dev/dri/card1) [ 9.172] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.0/drm/card1 [ 9.176] (--) PCI:*(3@0:0:0) 1002:73df:1eae:6710 rev 192, Mem @ 0xf800000000/17179869184, 0xfc00000000/268435456, 0xf6b00000/1048576, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072 [ 9.176] (--) PCI: (14@0:0:0) 1002:164e:1043:8877 rev 203, Mem @ 0xfc20000000/268435456, 0xfc30000000/2097152, 0xf6600000/524288, I/O @ 0x0000d000/256 [ 9.176] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 9.176] (II) LoadModule: "glx" [ 9.177] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.184] (II) Module glx: vendor="X.Org Foundation" [ 9.184] compiled for 1.21.1.13, module version = 1.0.0 [ 9.184] ABI class: X.Org Server Extension, version 10.0 [ 9.184] (==) Matched ati as autoconfigured driver 0 [ 9.184] (==) Matched modesetting as autoconfigured driver 1 [ 9.184] (==) Matched fbdev as autoconfigured driver 2 [ 9.184] (==) Matched vesa as autoconfigured driver 3 [ 9.184] (==) Assigned the driver to the xf86ConfigLayout [ 9.184] (II) LoadModule: "ati" [ 9.184] (WW) Warning, couldn't open module ati [ 9.184] (EE) Failed to load module "ati" (module does not exist, 0) [ 9.184] (II) LoadModule: "modesetting" [ 9.184] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 9.307] (II) Module modesetting: vendor="X.Org Foundation" [ 9.307] compiled for 1.21.1.13, module version = 1.21.1 [ 9.307] Module class: X.Org Video Driver [ 9.307] ABI class: X.Org Video Driver, version 25.2 [ 9.307] (II) LoadModule: "fbdev" [ 9.307] (WW) Warning, couldn't open module fbdev [ 9.307] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 9.307] (II) LoadModule: "vesa" [ 9.307] (WW) Warning, couldn't open module vesa [ 9.307] (EE) Failed to load module "vesa" (module does not exist, 0) [ 9.307] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 9.331] (II) modeset(0): using drv /dev/dri/card0 [ 9.332] (II) modeset(G0): using drv /dev/dri/card1 [ 9.333] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.333] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 9.333] (==) modeset(0): RGB weight 888 [ 9.333] (==) modeset(0): Default visual is TrueColor [ 9.333] (II) Loading sub module "glamoregl" [ 9.333] (II) LoadModule: "glamoregl" [ 9.333] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.337] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.337] compiled for 1.21.1.13, module version = 1.0.1 [ 9.337] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.355] (II) modeset(0): glamor X acceleration enabled on AMD Radeon RX 6750 XT (radeonsi, navi22, LLVM 18.1.8, DRM 3.57, 6.10.6-3-cachyos) [ 9.355] (II) modeset(0): glamor initialized [ 9.355] (==) modeset(0): VariableRefresh: disabled [ 9.355] (==) modeset(0): AsyncFlipSecondaries: disabled [ 9.355] (II) modeset(0): Output DP-1 has no monitor section [ 9.355] (II) modeset(0): Output DP-2 has no monitor section [ 9.359] (II) modeset(0): Output DP-3 has no monitor section [ 9.359] (II) modeset(0): Output HDMI-1 has no monitor section [ 9.359] (II) modeset(0): EDID for output DP-1 [ 9.359] (II) modeset(0): EDID for output DP-2 [ 9.363] (II) modeset(0): EDID for output DP-3 [ 9.363] (II) modeset(0): Manufacturer: AOC Model: b326 Serial#: ... [ 9.363] (II) modeset(0): Year: 2024 Week: 7 [ 9.363] (II) modeset(0): EDID Version: 1.4 [ 9.363] (II) modeset(0): Digital Display Input [ 9.363] (II) modeset(0): 10 bits per channel [ 9.363] (II) modeset(0): Digital interface is DisplayPort [ 9.363] (II) modeset(0): Max Image Size [cm]: horiz.: 60 vert.: 34 [ 9.363] (II) modeset(0): Gamma: 2.20 [ 9.363] (II) modeset(0): DPMS capabilities: Off [ 9.363] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2 [ 9.363] (II) modeset(0): Default color space is primary color space [ 9.363] (II) modeset(0): First detailed timing is preferred mode [ 9.363] (II) modeset(0): Preferred mode is native pixel format and refresh rate [ 9.363] (II) modeset(0): Display is continuous-frequency [ 9.363] (II) modeset(0): redX: 0.678 redY: 0.313 greenX: 0.248 greenY: 0.688 [ 9.363] (II) modeset(0): blueX: 0.149 blueY: 0.058 whiteX: 0.313 whiteY: 0.329 [ 9.363] (II) modeset(0): Supported established timings: [ 9.363] (II) modeset(0): 720x400@70Hz [ 9.363] (II) modeset(0): 640x480@60Hz [ 9.363] (II) modeset(0): 640x480@67Hz [ 9.363] (II) modeset(0): 640x480@72Hz [ 9.363] (II) modeset(0): 640x480@75Hz [ 9.363] (II) modeset(0): 800x600@56Hz [ 9.363] (II) modeset(0): 800x600@60Hz [ 9.363] (II) modeset(0): 800x600@72Hz [ 9.363] (II) modeset(0): 800x600@75Hz [ 9.363] (II) modeset(0): 832x624@75Hz [ 9.363] (II) modeset(0): 1024x768@60Hz [ 9.363] (II) modeset(0): 1024x768@70Hz [ 9.363] (II) modeset(0): 1024x768@75Hz [ 9.363] (II) modeset(0): 1280x1024@75Hz [ 9.363] (II) modeset(0): Manufacturer's mask: 0 [ 9.363] (II) modeset(0): Supported standard timings: [ 9.363] (II) modeset(0): #0: hsize: 1920 vsize 1080 refresh: 60 vid: 49361 [ 9.363] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 9.363] (II) modeset(0): #2: hsize: 640 vsize 480 refresh: 100 vid: 26673 [ 9.363] (II) modeset(0): #3: hsize: 640 vsize 480 refresh: 120 vid: 31793 [ 9.363] (II) modeset(0): #4: hsize: 800 vsize 600 refresh: 100 vid: 26693 [ 9.363] (II) modeset(0): #5: hsize: 800 vsize 600 refresh: 120 vid: 31813 [ 9.363] (II) modeset(0): #6: hsize: 1024 vsize 768 refresh: 100 vid: 26721 [ 9.363] (II) modeset(0): #7: hsize: 1024 vsize 768 refresh: 120 vid: 31841 [ 9.363] (II) modeset(0): Supported detailed timing: [ 9.363] (II) modeset(0): clock: 241.5 MHz Image Size: 597 x 336 mm [ 9.363] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 9.363] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 9.363] (II) modeset(0): Serial No: 1APQ2JA000058 [ 9.363] (II) modeset(0): Monitor name: Q27G3XMN [ 9.363] (II) modeset(0): Ranges: V min: 48 V max: 180 Hz, H min: 255 H max: 255 kHz, PixClock max 725 MHz [ 9.363] (II) modeset(0): Supported detailed timing: [ 9.363] (II) modeset(0): clock: 646.6 MHz Image Size: 597 x 336 mm [ 9.363] (II) modeset(0): h_active: 2560 h_sync: 2568 h_sync_end 2600 h_blank_end 2666 h_border: 0 [ 9.363] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1470 v_border: 0 [ 9.363] (II) modeset(0): Supported detailed timing: [ 9.363] (II) modeset(0): clock: 592.0 MHz Image Size: 597 x 336 mm [ 9.363] (II) modeset(0): h_active: 2560 h_sync: 2568 h_sync_end 2600 h_blank_end 2666 h_border: 0 [ 9.363] (II) modeset(0): v_active: 1440 v_sync: 1465 v_sync_end 1473 v_blanking: 1543 v_border: 0 [ 9.363] (II) modeset(0): Supported detailed timing: [ 9.363] (II) modeset(0): clock: 497.8 MHz Image Size: 597 x 336 mm [ 9.363] (II) modeset(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 9.363] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1525 v_border: 0 [ 9.363] (II) modeset(0): Supported detailed timing: [ 9.363] (II) modeset(0): clock: 156.0 MHz Image Size: 597 x 336 mm [ 9.363] (II) modeset(0): h_active: 1280 h_sync: 1376 h_sync_end 1512 h_blank_end 1744 h_border: 0 [ 9.363] (II) modeset(0): v_active: 1440 v_sync: 1443 v_sync_end 1453 v_blanking: 1493 v_border: 0 [ 9.363] (II) modeset(0): Number of EDID sections to follow: 2 [ 9.363] (II) modeset(0): EDID (in hex): [ 9.363] (II) modeset(0): 00ffffffffffff0005e326b33a000000 [ 9.363] (II) modeset(0): 07220104b53c22783f9975ad503fb026 [ 9.363] (II) modeset(0): 0e5054bfef00d1c081803168317c4568 [ 9.363] (II) modeset(0): 457c6168617c565e00a0a0a029503020 [ 9.363] (II) modeset(0): 350055502100001e000000ff00314150 [ 9.363] (II) modeset(0): 51324a41303030303538000000fc0051 [ 9.363] (II) modeset(0): 32374733584d4e0a20202020000000fd [ 9.363] (II) modeset(0): 0030b4ffff48010a2020202020200294 [ 9.363] (II) modeset(0): 020332f14c0103051404131f12021190 [ 9.363] (II) modeset(0): 3f2309070783010000e305e301e60607 [ 9.363] (II) modeset(0): 019191116d1a0000020b30b4e6059111 [ 9.363] (II) modeset(0): 951198fc006aa0a01e50082035005550 [ 9.363] (II) modeset(0): 2100001a40e7006aa0a0675008209804 [ 9.363] (II) modeset(0): 55502100001a6fc200a0a0a055503020 [ 9.363] (II) modeset(0): 350055502100001ef03c00d051a03550 [ 9.363] (II) modeset(0): 60883a0055502100001c00000000003f [ 9.363] (II) modeset(0): 70127903000301283f040184ff096900 [ 9.363] (II) modeset(0): 07801f009f051d000200040023190104 [ 9.363] (II) modeset(0): ff099f002f801f009f051d0002000400 [ 9.363] (II) modeset(0): 00000000000000000000000000000000 [ 9.363] (II) modeset(0): 00000000000000000000000000000000 [ 9.363] (II) modeset(0): 00000000000000000000000000000000 [ 9.363] (II) modeset(0): 00000000000000000000000000000000 [ 9.363] (II) modeset(0): 00000000000000000000000000002390 [ 9.363] (II) modeset(0): Printing probed modes for output DP-3 [ 9.363] (II) modeset(0): Modeline "2560x1440"x170.0 666.24 2560 2568 2600 2666 1440 1443 1448 1470 +hsync -vsync (249.9 kHz eP) [ 9.363] (II) modeset(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync +vsync (88.8 kHz eP) [ 9.363] (II) modeset(0): Modeline "2560x1440"x180.0 719.72 2560 2608 2640 2720 1440 1443 1448 1470 +hsync -vsync (264.6 kHz e) [ 9.363] (II) modeset(0): Modeline "2560x1440"x165.0 646.64 2560 2568 2600 2666 1440 1443 1448 1470 +hsync -vsync (242.6 kHz e) [ 9.363] (II) modeset(0): Modeline "2560x1440"x143.9 592.00 2560 2568 2600 2666 1440 1465 1473 1543 +hsync -vsync (222.1 kHz e) [ 9.363] (II) modeset(0): Modeline "2560x1440"x120.0 497.75 2560 2608 2640 2720 1440 1443 1448 1525 +hsync +vsync (183.0 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1440"x85.0 341.35 1920 2072 2288 2656 1440 1441 1444 1512 -hsync +vsync (128.5 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1440"x75.0 297.00 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync (112.5 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1856x1392"x75.0 288.00 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync (112.5 kHz d) [ 9.363] (II) modeset(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d) [ 9.363] (II) modeset(0): Modeline "1792x1344"x75.0 261.00 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync (106.3 kHz d) [ 9.363] (II) modeset(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d) [ 9.363] (II) modeset(0): Modeline "2048x1152"x60.0 406.50 2048 2220 2444 2840 1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d) [ 9.363] (II) modeset(0): Modeline "2048x1152"x60.0 302.50 2048 2072 2088 2128 1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d) [ 9.363] (II) modeset(0): Modeline "2048x1152"x59.9 197.00 2048 2184 2400 2752 1152 1155 1160 1195 -hsync +vsync (71.6 kHz d) [ 9.363] (II) modeset(0): Modeline "2048x1152"x59.9 156.75 2048 2096 2128 2208 1152 1155 1160 1185 +hsync -vsync (71.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1200"x170.0 666.24 1920 2568 2600 2666 1200 1443 1448 1470 +hsync -vsync (249.9 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1080"x60.0 356.38 1920 2080 2288 2656 1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1080"x120.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x119.9 296.70 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (134.9 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x60.0 266.50 1920 1944 1960 2000 1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d) [ 9.363] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync -vsync (67.5 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e) [ 9.363] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x1200"x170.0 666.24 1600 2568 2600 2666 1200 1443 1448 1470 +hsync -vsync (249.9 kHz e) [ 9.363] (II) modeset(0): Modeline "1600x1200"x85.0 229.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.2 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x1200"x70.0 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (87.5 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1280x1440"x59.9 156.00 1280 1376 1512 1744 1440 1443 1453 1493 -hsync +vsync (89.4 kHz e) [ 9.363] (II) modeset(0): Modeline "1680x1050"x170.0 666.24 1680 2568 2600 2666 1050 1443 1448 1470 +hsync -vsync (249.9 kHz e) [ 9.363] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d) [ 9.363] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d) [ 9.363] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d) [ 9.363] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x900"x60.0 246.00 1600 1728 1900 2200 900 901 904 932 doublescan -hsync +vsync (111.8 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x900"x59.9 186.50 1600 1624 1640 1680 900 901 904 926 doublescan +hsync -vsync (111.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d) [ 9.363] (II) modeset(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d) [ 9.363] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 9.363] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 9.363] (II) modeset(0): Modeline "1440x900"x170.0 666.24 1440 2568 2600 2666 900 1443 1448 1470 +hsync -vsync (249.9 kHz e) [ 9.363] (II) modeset(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d) [ 9.363] (II) modeset(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 9.364] (II) modeset(0): Modeline "1440x810"x60.0 198.12 1440 1548 1704 1968 810 811 814 839 doublescan -hsync +vsync (100.7 kHz d) [ 9.364] (II) modeset(0): Modeline "1440x810"x60.0 151.88 1440 1464 1480 1520 810 811 814 833 doublescan +hsync -vsync (99.9 kHz d) [ 9.364] (II) modeset(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d) [ 9.364] (II) modeset(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x800"x170.0 666.24 1280 2568 2600 2666 800 1443 1448 1470 +hsync -vsync (249.9 kHz e) [ 9.364] (II) modeset(0): Modeline "1280x800"x60.0 174.25 1280 1380 1516 1752 800 801 804 829 doublescan -hsync +vsync (99.5 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x800"x60.0 134.25 1280 1304 1320 1360 800 801 804 823 doublescan +hsync -vsync (98.7 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d) [ 9.364] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x720"x60.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x720"x60.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 9.364] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 9.364] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 9.364] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 9.364] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x768"x85.0 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync (137.0 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x768"x119.9 137.89 1024 1104 1208 1392 768 771 775 826 -hsync +vsync (99.1 kHz) [ 9.364] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x768"x100.0 112.27 1024 1096 1200 1376 768 771 775 816 -hsync +vsync (81.6 kHz) [ 9.364] (II) modeset(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 9.364] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 9.364] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9.364] (II) modeset(0): Modeline "1024x768i"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d) [ 9.364] (II) modeset(0): Modeline "960x720"x85.0 170.68 960 1036 1144 1328 720 720 722 756 doublescan -hsync +vsync (128.5 kHz d) [ 9.364] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d) [ 9.364] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 9.364] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d) [ 9.364] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 9.364] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d) [ 9.364] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x576"x60.0 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x576"x60.0 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 9.364] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 9.364] (II) modeset(0): Modeline "960x600"x59.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d) [ 9.364] (II) modeset(0): Modeline "960x600"x60.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 9.364] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 9.364] (II) modeset(0): Modeline "960x540"x60.0 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d) [ 9.364] (II) modeset(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 9.364] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 9.364] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x85.0 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x119.9 83.06 800 856 936 1072 600 603 607 646 -hsync +vsync (77.5 kHz) [ 9.364] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x99.9 67.39 800 848 928 1056 600 603 607 639 -hsync +vsync (63.8 kHz) [ 9.364] (II) modeset(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d) [ 9.364] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 9.364] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 9.364] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9.364] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 9.364] (II) modeset(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 9.364] (II) modeset(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 9.364] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 9.364] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 9.364] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 9.364] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d) [ 9.364] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 9.364] (II) modeset(0): Modeline "800x450"x59.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d) [ 9.364] (II) modeset(0): Modeline "800x450"x59.8 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d) [ 9.364] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 9.364] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 9.364] (II) modeset(0): Modeline "640x512"x85.0 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (91.1 kHz d) [ 9.364] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d) [ 9.364] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 9.364] (II) modeset(0): Modeline "700x450"x60.0 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d) [ 9.364] (II) modeset(0): Modeline "700x450"x59.9 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d) [ 9.364] (II) modeset(0): Modeline "640x480"x85.1 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (85.9 kHz d) [ 9.364] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 9.364] (II) modeset(0): Modeline "640x480"x119.8 52.62 640 680 744 848 480 483 487 518 -hsync +vsync (62.1 kHz) [ 9.364] (II) modeset(0): Modeline "640x480"x99.8 42.52 640 672 736 832 480 483 487 512 -hsync +vsync (51.1 kHz) [ 9.364] (II) modeset(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d) [ 9.364] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 9.364] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e) [ 9.364] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d) [ 9.364] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 9.364] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9.364] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9.364] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 9.364] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 9.364] (II) modeset(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9.364] (II) modeset(0): Modeline "684x384"x59.9 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d) [ 9.364] (II) modeset(0): Modeline "684x384"x59.9 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d) [ 9.364] (II) modeset(0): Modeline "640x400"x59.9 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d) [ 9.364] (II) modeset(0): Modeline "640x400"x60.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d) [ 9.364] (II) modeset(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d) [ 9.364] (II) modeset(0): Modeline "640x360"x59.9 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d) [ 9.364] (II) modeset(0): Modeline "640x360"x59.8 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d) [ 9.364] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 9.364] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 9.364] (II) modeset(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "512x384"x85.0 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz d) [ 9.364] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d) [ 9.364] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d) [ 9.364] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 9.364] (II) modeset(0): Modeline "512x384i"x87.1 22.45 512 516 604 632 384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d) [ 9.364] (II) modeset(0): Modeline "512x288"x60.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d) [ 9.364] (II) modeset(0): Modeline "512x288"x59.9 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 9.364] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d) [ 9.364] (II) modeset(0): Modeline "480x270"x59.6 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d) [ 9.364] (II) modeset(0): Modeline "480x270"x59.8 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d) [ 9.364] (II) modeset(0): Modeline "400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (53.7 kHz d) [ 9.364] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d) [ 9.364] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d) [ 9.364] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 9.364] (II) modeset(0): Modeline "432x243"x59.9 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d) [ 9.364] (II) modeset(0): Modeline "432x243"x59.6 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d) [ 9.364] (II) modeset(0): Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (43.3 kHz d) [ 9.364] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d) [ 9.364] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 9.364] (II) modeset(0): Modeline "360x202"x59.5 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d) [ 9.364] (II) modeset(0): Modeline "360x202"x59.1 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d) [ 9.364] (II) modeset(0): Modeline "360x200"x85.0 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (37.9 kHz d) [ 9.364] (II) modeset(0): Modeline "320x180"x59.8 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d) [ 9.364] (II) modeset(0): Modeline "320x180"x59.3 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d) [ 9.364] (II) modeset(0): Modeline "320x175"x85.3 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (37.9 kHz d) [ 9.364] (II) modeset(0): EDID for output HDMI-1 [ 9.364] (II) modeset(0): Output DP-1 disconnected [ 9.364] (II) modeset(0): Output DP-2 disconnected [ 9.364] (II) modeset(0): Output DP-3 connected [ 9.364] (II) modeset(0): Output HDMI-1 disconnected [ 9.364] (II) modeset(0): Using exact sizes for initial modes [ 9.364] (II) modeset(0): Output DP-3 using initial mode 2560x1440 +0+0 [ 9.364] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 9.364] (==) modeset(0): DPI set to (96, 96) [ 9.364] (II) Loading sub module "fb" [ 9.364] (II) LoadModule: "fb" [ 9.364] (II) Module "fb" already built-in [ 9.364] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32 [ 9.364] (==) modeset(G0): RGB weight 888 [ 9.364] (==) modeset(G0): Default visual is TrueColor [ 9.364] (II) Loading sub module "glamoregl" [ 9.364] (II) LoadModule: "glamoregl" [ 9.364] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.364] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.364] compiled for 1.21.1.13, module version = 1.0.1 [ 9.364] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.372] (II) modeset(G0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, raphael_mendocino, LLVM 18.1.8, DRM 3.57, 6.10.6-3-cachyos) [ 9.372] (II) modeset(G0): glamor initialized [ 9.372] (II) modeset(G0): Output HDMI-1-2 has no monitor section [ 9.372] (II) modeset(G0): Output DP-1-4 has no monitor section [ 9.372] (II) modeset(G0): Output DP-1-5 has no monitor section [ 9.372] (II) modeset(G0): EDID for output HDMI-1-2 [ 9.372] (II) modeset(G0): EDID for output DP-1-4 [ 9.372] (II) modeset(G0): EDID for output DP-1-5 [ 9.372] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0) [ 9.372] (==) modeset(G0): DPI set to (96, 96) [ 9.372] (II) Loading sub module "fb" [ 9.372] (II) LoadModule: "fb" [ 9.372] (II) Module "fb" already built-in [ 9.405] (==) modeset(0): Backing store enabled [ 9.405] (==) modeset(0): Silken mouse enabled [ 9.406] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 9.406] (==) modeset(0): DPMS enabled [ 9.406] (II) modeset(0): [DRI2] Setup complete [ 9.406] (II) modeset(0): [DRI2] DRI driver: radeonsi [ 9.406] (II) modeset(0): [DRI2] VDPAU driver: radeonsi [ 9.418] (==) modeset(G0): Backing store enabled [ 9.418] (==) modeset(G0): Silken mouse enabled [ 9.418] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc. [ 9.418] (==) modeset(G0): DPMS enabled [ 9.418] (II) modeset(G0): [DRI2] Setup complete [ 9.418] (II) modeset(G0): [DRI2] DRI driver: radeonsi [ 9.418] (II) modeset(G0): [DRI2] VDPAU driver: radeonsi [ 9.418] (II) Initializing extension Generic Event Extension [ 9.418] (II) Initializing extension SHAPE [ 9.418] (II) Initializing extension MIT-SHM [ 9.418] (II) Initializing extension XInputExtension [ 9.418] (II) Initializing extension XTEST [ 9.418] (II) Initializing extension BIG-REQUESTS [ 9.418] (II) Initializing extension SYNC [ 9.418] (II) Initializing extension XKEYBOARD [ 9.419] (II) Initializing extension XC-MISC [ 9.419] (II) Initializing extension SECURITY [ 9.419] (II) Initializing extension XFIXES [ 9.419] (II) Initializing extension RENDER [ 9.419] (II) Initializing extension RANDR [ 9.419] (II) Initializing extension COMPOSITE [ 9.419] (II) Initializing extension DAMAGE [ 9.419] (II) Initializing extension MIT-SCREEN-SAVER [ 9.419] (II) Initializing extension DOUBLE-BUFFER [ 9.419] (II) Initializing extension RECORD [ 9.419] (II) Initializing extension DPMS [ 9.419] (II) Initializing extension Present [ 9.419] (II) Initializing extension DRI3 [ 9.419] (II) Initializing extension X-Resource [ 9.419] (II) Initializing extension XVideo [ 9.419] (II) Initializing extension XVideo-MotionCompensation [ 9.419] (II) Initializing extension GLX [ 9.423] (II) AIGLX: Loaded and initialized radeonsi [ 9.423] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 9.423] (II) Initializing extension XFree86-VidModeExtension [ 9.423] (II) Initializing extension XFree86-DGA [ 9.423] (II) Initializing extension XFree86-DRI [ 9.423] (II) Initializing extension DRI2 [ 9.424] (II) modeset(G0): Damage tracking initialized [ 9.424] (II) modeset(0): Damage tracking initialized [ 9.424] (II) modeset(0): Setting screen physical size to 677 x 381 [ 9.469] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 9.469] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 9.469] (**) Power Button: Applying InputClass "system-keyboard" [ 9.469] (II) LoadModule: "libinput" [ 9.469] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 9.472] (II) Module libinput: vendor="X.Org Foundation" [ 9.472] compiled for 1.21.1.13, module version = 1.4.0 [ 9.472] Module class: X.Org XInput Driver [ 9.472] ABI class: X.Org XInput driver, version 24.4 [ 9.472] (II) Using input driver 'libinput' for 'Power Button' [ 9.472] (**) Power Button: always reports core events [ 9.472] (**) Option "Device" "/dev/input/event1" [ 9.474] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 9.474] (II) event1 - Power Button: device is a keyboard [ 9.474] (II) event1 - Power Button: device removed [ 9.474] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 9.474] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 9.474] (**) Option "xkb_layout" "us" [ 9.474] (WW) Option "xkb_variant" requires a string value [ 9.475] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 9.475] (II) event1 - Power Button: device is a keyboard [ 9.475] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 9.475] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 9.475] (**) Video Bus: Applying InputClass "system-keyboard" [ 9.475] (II) Using input driver 'libinput' for 'Video Bus' [ 9.475] (**) Video Bus: always reports core events [ 9.475] (**) Option "Device" "/dev/input/event2" [ 9.475] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 9.475] (II) event2 - Video Bus: device is a keyboard [ 9.475] (II) event2 - Video Bus: device removed [ 9.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2/event2" [ 9.499] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 9.499] (**) Option "xkb_layout" "us" [ 9.499] (WW) Option "xkb_variant" requires a string value [ 9.499] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 9.499] (II) event2 - Video Bus: device is a keyboard [ 9.499] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 9.499] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 9.499] (**) Power Button: Applying InputClass "system-keyboard" [ 9.499] (II) Using input driver 'libinput' for 'Power Button' [ 9.499] (**) Power Button: always reports core events [ 9.499] (**) Option "Device" "/dev/input/event0" [ 9.500] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 9.500] (II) event0 - Power Button: device is a keyboard [ 9.500] (II) event0 - Power Button: device removed [ 9.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 9.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 9.500] (**) Option "xkb_layout" "us" [ 9.500] (WW) Option "xkb_variant" requires a string value [ 9.501] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 9.501] (II) event0 - Power Button: device is a keyboard [ 9.501] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16) [ 9.501] (II) No input driver specified, ignoring this device. [ 9.501] (II) This device may have been added with another device file. [ 9.502] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event17) [ 9.502] (II) No input driver specified, ignoring this device. [ 9.502] (II) This device may have been added with another device file. [ 9.502] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event18) [ 9.502] (II) No input driver specified, ignoring this device. [ 9.502] (II) This device may have been added with another device file. [ 9.502] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event19) [ 9.502] (II) No input driver specified, ignoring this device. [ 9.502] (II) This device may have been added with another device file. [ 9.502] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event20) [ 9.502] (II) No input driver specified, ignoring this device. [ 9.502] (II) This device may have been added with another device file. [ 9.502] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event21) [ 9.502] (II) No input driver specified, ignoring this device. [ 9.502] (II) This device may have been added with another device file. [ 9.503] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [ 9.503] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [ 9.503] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [ 9.503] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [ 9.503] (**) OBINS OBINS AnnePro2: always reports core events [ 9.503] (**) Option "Device" "/dev/input/event4" [ 9.504] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [ 9.504] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [ 9.504] (II) event4 - OBINS OBINS AnnePro2: device removed [ 9.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.0007/input/input14/event4" [ 9.504] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 9) [ 9.504] (**) Option "xkb_layout" "us" [ 9.504] (WW) Option "xkb_variant" requires a string value [ 9.505] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [ 9.505] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [ 9.505] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [ 9.505] (II) No input driver specified, ignoring this device. [ 9.505] (II) This device may have been added with another device file. [ 9.506] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [ 9.506] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 9.506] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [ 9.506] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [ 9.506] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [ 9.506] (**) Option "Device" "/dev/input/event6" [ 9.507] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [ 9.507] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [ 9.507] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [ 9.525] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input16/event6" [ 9.525] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 10) [ 9.525] (**) Option "xkb_layout" "us" [ 9.525] (WW) Option "xkb_variant" requires a string value [ 9.525] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [ 9.525] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [ 9.526] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [ 9.526] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [ 9.526] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [ 9.526] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [ 9.526] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [ 9.526] (**) Option "Device" "/dev/input/event7" [ 9.527] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [ 9.527] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [ 9.527] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [ 9.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input17/event7" [ 9.527] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 11) [ 9.527] (**) Option "xkb_layout" "us" [ 9.527] (WW) Option "xkb_variant" requires a string value [ 9.528] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [ 9.528] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [ 9.528] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [ 9.528] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [ 9.528] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [ 9.528] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [ 9.528] (**) Option "Device" "/dev/input/event8" [ 9.529] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [ 9.529] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [ 9.529] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [ 9.551] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.551] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.551] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.551] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input18/event8" [ 9.551] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 12) [ 9.551] (**) Option "AccelerationScheme" "none" [ 9.551] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [ 9.551] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [ 9.551] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [ 9.552] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [ 9.552] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [ 9.552] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [ 9.552] (II) No input driver specified, ignoring this device. [ 9.552] (II) This device may have been added with another device file. [ 9.553] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [ 9.553] (II) No input driver specified, ignoring this device. [ 9.553] (II) This device may have been added with another device file. [ 9.553] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [ 9.553] (II) No input driver specified, ignoring this device. [ 9.553] (II) This device may have been added with another device file. [ 9.553] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13) [ 9.553] (II) No input driver specified, ignoring this device. [ 9.553] (II) This device may have been added with another device file. [ 9.554] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event14) [ 9.554] (II) No input driver specified, ignoring this device. [ 9.554] (II) This device may have been added with another device file. [ 9.554] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event15) [ 9.554] (II) No input driver specified, ignoring this device. [ 9.554] (II) This device may have been added with another device file. [ 9.554] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/event3) [ 9.554] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [ 9.554] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [ 9.554] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [ 9.554] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [ 9.554] (**) Logitech MX Master 2S: always reports core events [ 9.554] (**) Option "Device" "/dev/input/event3" [ 9.555] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [ 9.555] (II) event3 - Logitech MX Master 2S: device is a pointer [ 9.555] (II) event3 - Logitech MX Master 2S: device is a keyboard [ 9.555] (II) event3 - Logitech MX Master 2S: device removed [ 9.555] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.555] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.555] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.555] (II) libinput: Logitech MX Master 2S: needs a virtual subdevice [ 9.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [ 9.555] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: MOUSE, id 13) [ 9.555] (**) Option "AccelerationScheme" "none" [ 9.555] (**) Logitech MX Master 2S: (accel) selected scheme none/0 [ 9.555] (**) Logitech MX Master 2S: (accel) acceleration factor: 2.000 [ 9.555] (**) Logitech MX Master 2S: (accel) acceleration threshold: 4 [ 9.556] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [ 9.556] (II) event3 - Logitech MX Master 2S: device is a pointer [ 9.556] (II) event3 - Logitech MX Master 2S: device is a keyboard [ 9.557] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/mouse0) [ 9.557] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [ 9.557] (II) No input driver specified, ignoring this device. [ 9.557] (II) This device may have been added with another device file. [ 9.557] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event22) [ 9.557] (II) No input driver specified, ignoring this device. [ 9.557] (II) This device may have been added with another device file. [ 9.557] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event23) [ 9.557] (II) No input driver specified, ignoring this device. [ 9.557] (II) This device may have been added with another device file. [ 9.557] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event24) [ 9.557] (II) No input driver specified, ignoring this device. [ 9.557] (II) This device may have been added with another device file. [ 9.558] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event25) [ 9.558] (II) No input driver specified, ignoring this device. [ 9.558] (II) This device may have been added with another device file. [ 9.558] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event26) [ 9.558] (II) No input driver specified, ignoring this device. [ 9.558] (II) This device may have been added with another device file. [ 9.558] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event12) [ 9.558] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 9.558] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard" [ 9.558] (II) Using input driver 'libinput' for 'Asus WMI hotkeys' [ 9.558] (**) Asus WMI hotkeys: always reports core events [ 9.558] (**) Option "Device" "/dev/input/event12" [ 9.558] (II) event12 - Asus WMI hotkeys: is tagged by udev as: Keyboard [ 9.558] (II) event12 - Asus WMI hotkeys: device is a keyboard [ 9.558] (II) event12 - Asus WMI hotkeys: device removed [ 9.577] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input31/event12" [ 9.577] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14) [ 9.577] (**) Option "xkb_layout" "us" [ 9.577] (WW) Option "xkb_variant" requires a string value [ 9.577] (II) event12 - Asus WMI hotkeys: is tagged by udev as: Keyboard [ 9.577] (II) event12 - Asus WMI hotkeys: device is a keyboard [ 9.577] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11) [ 9.577] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 9.577] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard" [ 9.577] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys' [ 9.577] (**) Eee PC WMI hotkeys: always reports core events [ 9.577] (**) Option "Device" "/dev/input/event11" [ 9.578] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [ 9.578] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [ 9.578] (II) event11 - Eee PC WMI hotkeys: device removed [ 9.594] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input24/event11" [ 9.594] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15) [ 9.594] (**) Option "xkb_layout" "us" [ 9.594] (WW) Option "xkb_variant" requires a string value [ 9.594] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [ 9.594] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [ 9.594] (II) config/udev: Adding input device PC Speaker (/dev/input/event10) [ 9.594] (II) No input driver specified, ignoring this device. [ 9.594] (II) This device may have been added with another device file. [ 9.598] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [ 9.598] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [ 9.598] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [ 9.598] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [ 9.598] (**) Logitech MX Master 2S: always reports core events [ 9.598] (**) Option "Device" "/dev/input/event3" [ 9.598] (II) libinput: Logitech MX Master 2S: is a virtual subdevice [ 9.598] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.598] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.598] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9.598] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [ 9.598] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: KEYBOARD, id 16) [ 9.598] (**) Option "xkb_layout" "us" [ 9.598] (WW) Option "xkb_variant" requires a string value [ 15.279] (II) modeset(0): Disabling kernel dirty updates, not required. [ 15.439] (II) event1 - Power Button: device removed [ 15.439] (II) event2 - Video Bus: device removed [ 15.447] (II) event0 - Power Button: device removed [ 15.447] (II) event4 - OBINS OBINS AnnePro2: device removed [ 15.447] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [ 15.463] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [ 15.463] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [ 15.471] (II) event12 - Asus WMI hotkeys: device removed [ 15.477] (II) event11 - Eee PC WMI hotkeys: device removed [ 15.483] (II) event3 - Logitech MX Master 2S: device removed [ 15.483] (II) AIGLX: Suspending AIGLX clients for VT switch [ 74.602] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 74.602] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 74.602] (II) No input driver specified, ignoring this device. [ 74.602] (II) This device may have been added with another device file. [ 74.619] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event27) [ 74.619] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 74.619] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 74.619] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 74.619] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 74.619] (**) RPCS3 GUI Input Device: always reports core events [ 74.619] (**) Option "Device" "/dev/input/event27" [ 74.619] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 74.619] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 74.620] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 74.620] (II) event27 - RPCS3 GUI Input Device: device removed [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 74.620] (**) Option "config_info" "udev:/sys/devices/virtual/input/input37/event27" [ 74.620] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 74.620] (**) Option "AccelerationScheme" "none" [ 74.620] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 74.620] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 74.620] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 74.620] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 74.620] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 74.620] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 74.620] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 74.620] (**) RPCS3 GUI Input Device: always reports core events [ 74.620] (**) Option "Device" "/dev/input/event27" [ 74.620] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 74.620] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 74.620] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 74.620] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 74.620] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 74.620] (II) event27 - RPCS3 GUI Input Device: device removed [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 74.620] (**) Option "config_info" "udev:/sys/devices/virtual/input/input37/event27" [ 74.620] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 74.620] (**) Option "xkb_layout" "us" [ 74.620] (WW) Option "xkb_variant" requires a string value [ 80.867] (II) config/udev: removing device RPCS3 GUI Input Device [ 80.867] (II) UnloadModule: "libinput" [ 80.867] (II) config/udev: removing device RPCS3 GUI Input Device [ 80.867] (II) UnloadModule: "libinput" [ 354.027] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 354.027] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 354.027] (II) No input driver specified, ignoring this device. [ 354.027] (II) This device may have been added with another device file. [ 354.034] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event27) [ 354.034] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 354.034] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 354.034] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 354.034] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 354.034] (**) RPCS3 GUI Input Device: always reports core events [ 354.034] (**) Option "Device" "/dev/input/event27" [ 354.034] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 354.034] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 354.034] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 354.035] (II) event27 - RPCS3 GUI Input Device: device removed [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 354.035] (**) Option "config_info" "udev:/sys/devices/virtual/input/input38/event27" [ 354.035] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 354.035] (**) Option "AccelerationScheme" "none" [ 354.035] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 354.035] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 354.035] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 354.035] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 354.035] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 354.035] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 354.035] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 354.035] (**) RPCS3 GUI Input Device: always reports core events [ 354.035] (**) Option "Device" "/dev/input/event27" [ 354.035] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 354.035] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 354.035] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 354.035] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 354.035] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 354.035] (II) event27 - RPCS3 GUI Input Device: device removed [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 354.035] (**) Option "config_info" "udev:/sys/devices/virtual/input/input38/event27" [ 354.035] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 354.035] (**) Option "xkb_layout" "us" [ 354.035] (WW) Option "xkb_variant" requires a string value [ 549.016] (II) config/udev: removing device RPCS3 GUI Input Device [ 549.016] (II) UnloadModule: "libinput" [ 549.016] (II) config/udev: removing device RPCS3 GUI Input Device [ 549.016] (II) UnloadModule: "libinput" [ 591.850] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 591.850] (II) No input driver specified, ignoring this device. [ 591.850] (II) This device may have been added with another device file. [ 591.871] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 591.871] (II) No input driver specified, ignoring this device. [ 591.871] (II) This device may have been added with another device file. [ 811.737] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 811.738] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 811.738] (II) No input driver specified, ignoring this device. [ 811.738] (II) This device may have been added with another device file. [ 811.758] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event27) [ 811.758] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 811.758] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 811.758] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 811.758] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 811.758] (**) RPCS3 GUI Input Device: always reports core events [ 811.758] (**) Option "Device" "/dev/input/event27" [ 811.758] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 811.759] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 811.759] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 811.759] (II) event27 - RPCS3 GUI Input Device: device removed [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 811.759] (**) Option "config_info" "udev:/sys/devices/virtual/input/input40/event27" [ 811.759] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 811.759] (**) Option "AccelerationScheme" "none" [ 811.759] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 811.759] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 811.759] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 811.759] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 811.759] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 811.759] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 811.759] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 811.759] (**) RPCS3 GUI Input Device: always reports core events [ 811.759] (**) Option "Device" "/dev/input/event27" [ 811.759] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 811.759] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 811.759] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 811.759] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 811.759] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 811.759] (II) event27 - RPCS3 GUI Input Device: device removed [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 811.759] (**) Option "config_info" "udev:/sys/devices/virtual/input/input40/event27" [ 811.759] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 811.759] (**) Option "xkb_layout" "us" [ 811.759] (WW) Option "xkb_variant" requires a string value [ 868.453] (II) config/udev: removing device RPCS3 GUI Input Device [ 868.453] (II) UnloadModule: "libinput" [ 868.453] (II) config/udev: removing device RPCS3 GUI Input Device [ 868.453] (II) UnloadModule: "libinput" [ 894.936] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 894.936] (II) No input driver specified, ignoring this device. [ 894.936] (II) This device may have been added with another device file. [ 894.962] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 894.962] (II) No input driver specified, ignoring this device. [ 894.962] (II) This device may have been added with another device file. [ 896.527] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 896.527] (II) No input driver specified, ignoring this device. [ 896.528] (II) This device may have been added with another device file. [ 896.552] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 896.552] (II) No input driver specified, ignoring this device. [ 896.552] (II) This device may have been added with another device file. [ 932.560] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 932.560] (II) No input driver specified, ignoring this device. [ 932.560] (II) This device may have been added with another device file. [ 932.575] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 932.575] (II) No input driver specified, ignoring this device. [ 932.575] (II) This device may have been added with another device file. [ 941.448] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 941.448] (II) No input driver specified, ignoring this device. [ 941.448] (II) This device may have been added with another device file. [ 941.467] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 941.467] (II) No input driver specified, ignoring this device. [ 941.467] (II) This device may have been added with another device file. [ 947.384] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 947.384] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 947.384] (II) No input driver specified, ignoring this device. [ 947.384] (II) This device may have been added with another device file. [ 947.393] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event27) [ 947.393] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 947.393] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 947.393] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 947.393] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 947.393] (**) RPCS3 GUI Input Device: always reports core events [ 947.393] (**) Option "Device" "/dev/input/event27" [ 947.393] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 947.394] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 947.394] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 947.394] (II) event27 - RPCS3 GUI Input Device: device removed [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 947.394] (**) Option "config_info" "udev:/sys/devices/virtual/input/input45/event27" [ 947.394] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 947.394] (**) Option "AccelerationScheme" "none" [ 947.394] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 947.394] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 947.394] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 947.394] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 947.394] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 947.394] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 947.394] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 947.394] (**) RPCS3 GUI Input Device: always reports core events [ 947.394] (**) Option "Device" "/dev/input/event27" [ 947.394] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 947.394] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 947.394] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 947.394] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 947.394] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 947.394] (II) event27 - RPCS3 GUI Input Device: device removed [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 947.394] (**) Option "config_info" "udev:/sys/devices/virtual/input/input45/event27" [ 947.394] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 947.394] (**) Option "xkb_layout" "us" [ 947.394] (WW) Option "xkb_variant" requires a string value [ 958.808] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 958.808] (II) No input driver specified, ignoring this device. [ 958.808] (II) This device may have been added with another device file. [ 958.830] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 958.830] (II) No input driver specified, ignoring this device. [ 958.830] (II) This device may have been added with another device file. [ 973.842] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 973.842] (II) No input driver specified, ignoring this device. [ 973.842] (II) This device may have been added with another device file. [ 973.870] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 973.870] (II) No input driver specified, ignoring this device. [ 973.870] (II) This device may have been added with another device file. [ 978.173] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 978.173] (II) No input driver specified, ignoring this device. [ 978.173] (II) This device may have been added with another device file. [ 978.197] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 978.197] (II) No input driver specified, ignoring this device. [ 978.197] (II) This device may have been added with another device file. [ 983.446] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 983.446] (II) No input driver specified, ignoring this device. [ 983.446] (II) This device may have been added with another device file. [ 983.448] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 983.448] (II) No input driver specified, ignoring this device. [ 983.448] (II) This device may have been added with another device file. [ 1011.288] (II) config/udev: removing device RPCS3 GUI Input Device [ 1011.288] (II) UnloadModule: "libinput" [ 1011.288] (II) config/udev: removing device RPCS3 GUI Input Device [ 1011.288] (II) UnloadModule: "libinput" [ 1029.195] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1029.195] (II) No input driver specified, ignoring this device. [ 1029.195] (II) This device may have been added with another device file. [ 1029.213] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1029.213] (II) No input driver specified, ignoring this device. [ 1029.213] (II) This device may have been added with another device file. [ 1034.477] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1034.477] (II) No input driver specified, ignoring this device. [ 1034.477] (II) This device may have been added with another device file. [ 1034.479] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1034.479] (II) No input driver specified, ignoring this device. [ 1034.479] (II) This device may have been added with another device file. [ 1048.929] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1048.929] (II) No input driver specified, ignoring this device. [ 1048.929] (II) This device may have been added with another device file. [ 1048.954] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1048.954] (II) No input driver specified, ignoring this device. [ 1048.954] (II) This device may have been added with another device file. [ 1086.864] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1086.864] (II) No input driver specified, ignoring this device. [ 1086.864] (II) This device may have been added with another device file. [ 1086.884] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1086.884] (II) No input driver specified, ignoring this device. [ 1086.884] (II) This device may have been added with another device file. [ 1098.517] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1098.517] (II) No input driver specified, ignoring this device. [ 1098.517] (II) This device may have been added with another device file. [ 1098.534] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1098.534] (II) No input driver specified, ignoring this device. [ 1098.534] (II) This device may have been added with another device file. [ 1132.351] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 1132.351] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1132.351] (II) No input driver specified, ignoring this device. [ 1132.351] (II) This device may have been added with another device file. [ 1132.367] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event27) [ 1132.367] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1132.367] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1132.367] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1132.367] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1132.367] (**) RPCS3 GUI Input Device: always reports core events [ 1132.367] (**) Option "Device" "/dev/input/event27" [ 1132.367] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1132.367] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 1132.367] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 1132.367] (II) event27 - RPCS3 GUI Input Device: device removed [ 1132.367] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 1132.368] (**) Option "config_info" "udev:/sys/devices/virtual/input/input55/event27" [ 1132.368] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 1132.368] (**) Option "AccelerationScheme" "none" [ 1132.368] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 1132.368] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 1132.368] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 1132.368] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1132.368] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1132.368] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1132.368] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1132.368] (**) RPCS3 GUI Input Device: always reports core events [ 1132.368] (**) Option "Device" "/dev/input/event27" [ 1132.368] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 1132.368] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 1132.368] (II) event27 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1132.368] (II) event27 - RPCS3 GUI Input Device: device is a pointer [ 1132.368] (II) event27 - RPCS3 GUI Input Device: device is a keyboard [ 1132.368] (II) event27 - RPCS3 GUI Input Device: device removed [ 1132.368] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1132.368] (**) Option "config_info" "udev:/sys/devices/virtual/input/input55/event27" [ 1132.368] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 1132.368] (**) Option "xkb_layout" "us" [ 1132.368] (WW) Option "xkb_variant" requires a string value [ 1182.619] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1182.619] (II) No input driver specified, ignoring this device. [ 1182.619] (II) This device may have been added with another device file. [ 1182.636] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 1182.636] (II) No input driver specified, ignoring this device. [ 1182.636] (II) This device may have been added with another device file. [ 1185.066] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1185.066] (II) No input driver specified, ignoring this device. [ 1185.066] (II) This device may have been added with another device file. [ 1185.082] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event28) [ 1185.082] (II) No input driver specified, ignoring this device. [ 1185.082] (II) This device may have been added with another device file. [ 1242.309] (II) config/udev: removing device RPCS3 GUI Input Device [ 1242.309] (II) UnloadModule: "libinput" [ 1242.309] (II) config/udev: removing device RPCS3 GUI Input Device [ 1242.309] (II) UnloadModule: "libinput" [ 1292.093] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1292.093] (II) No input driver specified, ignoring this device. [ 1292.093] (II) This device may have been added with another device file. [ 1292.110] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1292.110] (II) No input driver specified, ignoring this device. [ 1292.110] (II) This device may have been added with another device file. [ 1293.161] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [ 1293.161] (II) No input driver specified, ignoring this device. [ 1293.161] (II) This device may have been added with another device file. [ 1293.185] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [ 1293.185] (II) No input driver specified, ignoring this device. [ 1293.185] (II) This device may have been added with another device file. [ 1312.525] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 1312.525] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1312.525] (II) No input driver specified, ignoring this device. [ 1312.525] (II) This device may have been added with another device file. [ 1312.537] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event28) [ 1312.537] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1312.537] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1312.537] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1312.537] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1312.537] (**) RPCS3 GUI Input Device: always reports core events [ 1312.537] (**) Option "Device" "/dev/input/event28" [ 1312.538] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1312.538] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1312.538] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1312.538] (II) event28 - RPCS3 GUI Input Device: device removed [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 1312.557] (**) Option "config_info" "udev:/sys/devices/virtual/input/input60/event28" [ 1312.557] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 1312.557] (**) Option "AccelerationScheme" "none" [ 1312.557] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 1312.557] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 1312.557] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 1312.557] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1312.557] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1312.557] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1312.557] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1312.557] (**) RPCS3 GUI Input Device: always reports core events [ 1312.557] (**) Option "Device" "/dev/input/event28" [ 1312.557] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 1312.557] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 1312.557] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1312.557] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1312.557] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1312.557] (II) event28 - RPCS3 GUI Input Device: device removed [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1312.557] (**) Option "config_info" "udev:/sys/devices/virtual/input/input60/event28" [ 1312.557] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 1312.558] (**) Option "xkb_layout" "us" [ 1312.558] (WW) Option "xkb_variant" requires a string value [ 1324.427] (II) config/udev: removing device RPCS3 GUI Input Device [ 1324.427] (II) UnloadModule: "libinput" [ 1324.427] (II) config/udev: removing device RPCS3 GUI Input Device [ 1324.427] (II) UnloadModule: "libinput" [ 1400.686] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 1400.686] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1400.686] (II) No input driver specified, ignoring this device. [ 1400.686] (II) This device may have been added with another device file. [ 1400.710] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event28) [ 1400.710] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1400.710] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1400.710] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1400.710] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1400.710] (**) RPCS3 GUI Input Device: always reports core events [ 1400.710] (**) Option "Device" "/dev/input/event28" [ 1400.710] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1400.710] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1400.711] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1400.711] (II) event28 - RPCS3 GUI Input Device: device removed [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 1400.711] (**) Option "config_info" "udev:/sys/devices/virtual/input/input61/event28" [ 1400.711] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 1400.711] (**) Option "AccelerationScheme" "none" [ 1400.711] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 1400.711] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 1400.711] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 1400.711] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1400.711] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1400.711] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1400.711] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1400.711] (**) RPCS3 GUI Input Device: always reports core events [ 1400.711] (**) Option "Device" "/dev/input/event28" [ 1400.711] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 1400.711] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 1400.711] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1400.711] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1400.711] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1400.711] (II) event28 - RPCS3 GUI Input Device: device removed [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1400.711] (**) Option "config_info" "udev:/sys/devices/virtual/input/input61/event28" [ 1400.711] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 1400.711] (**) Option "xkb_layout" "us" [ 1400.711] (WW) Option "xkb_variant" requires a string value [ 1480.333] (II) config/udev: removing device RPCS3 GUI Input Device [ 1480.333] (II) UnloadModule: "libinput" [ 1480.333] (II) config/udev: removing device RPCS3 GUI Input Device [ 1480.333] (II) UnloadModule: "libinput" [ 1487.231] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 1487.231] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1487.231] (II) No input driver specified, ignoring this device. [ 1487.231] (II) This device may have been added with another device file. [ 1487.246] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event28) [ 1487.246] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1487.246] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1487.246] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1487.246] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1487.246] (**) RPCS3 GUI Input Device: always reports core events [ 1487.246] (**) Option "Device" "/dev/input/event28" [ 1487.246] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1487.246] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1487.246] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1487.247] (II) event28 - RPCS3 GUI Input Device: device removed [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 1487.247] (**) Option "config_info" "udev:/sys/devices/virtual/input/input62/event28" [ 1487.247] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 1487.247] (**) Option "AccelerationScheme" "none" [ 1487.247] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 1487.247] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 1487.247] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 1487.247] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 1487.247] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 1487.247] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 1487.247] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 1487.247] (**) RPCS3 GUI Input Device: always reports core events [ 1487.247] (**) Option "Device" "/dev/input/event28" [ 1487.247] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 1487.247] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 1487.247] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 1487.247] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 1487.247] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 1487.247] (II) event28 - RPCS3 GUI Input Device: device removed [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1487.247] (**) Option "config_info" "udev:/sys/devices/virtual/input/input62/event28" [ 1487.247] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 1487.247] (**) Option "xkb_layout" "us" [ 1487.247] (WW) Option "xkb_variant" requires a string value [ 1495.351] (II) config/udev: removing device RPCS3 GUI Input Device [ 1495.351] (II) UnloadModule: "libinput" [ 1495.351] (II) config/udev: removing device RPCS3 GUI Input Device [ 1495.351] (II) UnloadModule: "libinput" [ 2897.603] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/mouse2) [ 2897.603] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 2897.603] (II) No input driver specified, ignoring this device. [ 2897.603] (II) This device may have been added with another device file. [ 2897.618] (II) config/udev: Adding input device RPCS3 GUI Input Device (/dev/input/event28) [ 2897.618] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 2897.618] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 2897.618] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 2897.618] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 2897.618] (**) RPCS3 GUI Input Device: always reports core events [ 2897.618] (**) Option "Device" "/dev/input/event28" [ 2897.618] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device removed [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (II) libinput: RPCS3 GUI Input Device: needs a virtual subdevice [ 2897.619] (**) Option "config_info" "udev:/sys/devices/virtual/input/input63/event28" [ 2897.619] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: MOUSE, id 17) [ 2897.619] (**) Option "AccelerationScheme" "none" [ 2897.619] (**) RPCS3 GUI Input Device: (accel) selected scheme none/0 [ 2897.619] (**) RPCS3 GUI Input Device: (accel) acceleration factor: 2.000 [ 2897.619] (**) RPCS3 GUI Input Device: (accel) acceleration threshold: 4 [ 2897.619] (**) RPCS3 GUI Input Device: Applying InputClass "libinput pointer catchall" [ 2897.619] (**) RPCS3 GUI Input Device: Applying InputClass "libinput keyboard catchall" [ 2897.619] (**) RPCS3 GUI Input Device: Applying InputClass "system-keyboard" [ 2897.619] (II) Using input driver 'libinput' for 'RPCS3 GUI Input Device' [ 2897.619] (**) RPCS3 GUI Input Device: always reports core events [ 2897.619] (**) Option "Device" "/dev/input/event28" [ 2897.619] (II) libinput: RPCS3 GUI Input Device: is a virtual subdevice [ 2897.619] (EE) libinput: RPCS3 GUI Input Device: Parent device not available [ 2897.619] (II) event28 - RPCS3 GUI Input Device: is tagged by udev as: Keyboard Mouse [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device is a pointer [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device is a keyboard [ 2897.619] (II) event28 - RPCS3 GUI Input Device: device removed [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (II) libinput: RPCS3 GUI Input Device: Step value 0 was provided, libinput Fallback acceleration function is used. [ 2897.619] (**) Option "config_info" "udev:/sys/devices/virtual/input/input63/event28" [ 2897.619] (II) XINPUT: Adding extended input device "RPCS3 GUI Input Device" (type: KEYBOARD, id 18) [ 2897.619] (**) Option "xkb_layout" "us" [ 2897.619] (WW) Option "xkb_variant" requires a string value [ 3103.568] (II) config/udev: removing device RPCS3 GUI Input Device [ 3103.568] (II) UnloadModule: "libinput" [ 3103.568] (II) config/udev: removing device RPCS3 GUI Input Device [ 3103.568] (II) UnloadModule: "libinput" [ 37584.958] (II) config/udev: Adding input device MOOER GE200 (/dev/input/event27) [ 37584.958] (II) No input driver specified, ignoring this device. [ 37584.958] (II) This device may have been added with another device file. [115588.169] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/mouse2) [115588.169] (II) No input driver specified, ignoring this device. [115588.169] (II) This device may have been added with another device file. [115588.194] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/event28) [115588.194] (**) Rockbox.org Rockbox media player Mouse: Applying InputClass "libinput pointer catchall" [115588.194] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Mouse' [115588.194] (**) Rockbox.org Rockbox media player Mouse: always reports core events [115588.194] (**) Option "Device" "/dev/input/event28" [115588.195] (II) event28 - Rockbox.org Rockbox media player Mouse: is tagged by udev as: Mouse [115588.196] (II) event28 - Rockbox.org Rockbox media player Mouse: device is a pointer [115588.196] (II) event28 - Rockbox.org Rockbox media player Mouse: device removed [115588.196] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [115588.196] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [115588.196] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [115588.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-3/1-3:1.1/0003:05AC:1261.001C/input/input68/event28" [115588.196] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Mouse" (type: MOUSE, id 17) [115588.196] (**) Option "AccelerationScheme" "none" [115588.196] (**) Rockbox.org Rockbox media player Mouse: (accel) selected scheme none/0 [115588.196] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration factor: 2.000 [115588.196] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration threshold: 4 [115588.196] (II) config/udev: Adding input device Rockbox.org Rockbox media player Keyboard (/dev/input/event27) [115588.196] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [115588.196] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [115588.196] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [115588.196] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [115588.196] (**) Option "Device" "/dev/input/event27" [115588.197] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [115588.197] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [115588.197] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [115588.197] (II) libinput: Rockbox.org Rockbox media player Keyboard: needs a virtual subdevice [115588.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-3/1-3:1.1/0003:05AC:1261.001C/input/input67/event27" [115588.197] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: MOUSE, id 18) [115588.198] (**) Option "AccelerationScheme" "none" [115588.198] (**) Rockbox.org Rockbox media player Keyboard: (accel) selected scheme none/0 [115588.198] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration factor: 2.000 [115588.198] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration threshold: 4 [115588.198] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [115588.198] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [115588.198] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [115588.198] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [115588.198] (**) Option "Device" "/dev/input/event27" [115588.198] (II) libinput: Rockbox.org Rockbox media player Keyboard: is a virtual subdevice [115588.198] (EE) libinput: Rockbox.org Rockbox media player Keyboard: Parent device not available [115588.198] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [115588.199] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [115588.199] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [115588.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-3/1-3:1.1/0003:05AC:1261.001C/input/input67/event27" [115588.199] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: KEYBOARD, id 19) [115588.199] (**) Option "xkb_layout" "us" [115588.199] (WW) Option "xkb_variant" requires a string value [115695.672] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [115695.672] (II) UnloadModule: "libinput" [115695.672] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [115695.672] (II) UnloadModule: "libinput" [115695.690] (II) config/udev: removing device Rockbox.org Rockbox media player Mouse [115695.690] (II) UnloadModule: "libinput" [137103.579] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/mouse2) [137103.579] (II) No input driver specified, ignoring this device. [137103.579] (II) This device may have been added with another device file. [137103.617] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/event28) [137103.617] (**) Rockbox.org Rockbox media player Mouse: Applying InputClass "libinput pointer catchall" [137103.617] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Mouse' [137103.617] (**) Rockbox.org Rockbox media player Mouse: always reports core events [137103.617] (**) Option "Device" "/dev/input/event28" [137103.618] (II) event28 - Rockbox.org Rockbox media player Mouse: is tagged by udev as: Mouse [137103.618] (II) event28 - Rockbox.org Rockbox media player Mouse: device is a pointer [137103.618] (II) event28 - Rockbox.org Rockbox media player Mouse: device removed [137103.618] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [137103.618] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [137103.618] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [137103.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.001D/input/input70/event28" [137103.618] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Mouse" (type: MOUSE, id 17) [137103.618] (**) Option "AccelerationScheme" "none" [137103.618] (**) Rockbox.org Rockbox media player Mouse: (accel) selected scheme none/0 [137103.618] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration factor: 2.000 [137103.618] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration threshold: 4 [137103.618] (II) config/udev: Adding input device Rockbox.org Rockbox media player Keyboard (/dev/input/event27) [137103.618] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [137103.618] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [137103.618] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [137103.618] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [137103.618] (**) Option "Device" "/dev/input/event27" [137103.619] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [137103.619] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [137103.619] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [137103.620] (II) libinput: Rockbox.org Rockbox media player Keyboard: needs a virtual subdevice [137103.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.001D/input/input69/event27" [137103.620] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: MOUSE, id 18) [137103.620] (**) Option "AccelerationScheme" "none" [137103.620] (**) Rockbox.org Rockbox media player Keyboard: (accel) selected scheme none/0 [137103.620] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration factor: 2.000 [137103.620] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration threshold: 4 [137103.620] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [137103.620] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [137103.620] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [137103.620] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [137103.620] (**) Option "Device" "/dev/input/event27" [137103.620] (II) libinput: Rockbox.org Rockbox media player Keyboard: is a virtual subdevice [137103.620] (EE) libinput: Rockbox.org Rockbox media player Keyboard: Parent device not available [137103.621] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [137103.621] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [137103.621] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [137103.621] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.001D/input/input69/event27" [137103.621] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: KEYBOARD, id 19) [137103.621] (**) Option "xkb_layout" "us" [137103.621] (WW) Option "xkb_variant" requires a string value [137199.196] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [137199.196] (II) UnloadModule: "libinput" [137199.196] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [137199.196] (II) UnloadModule: "libinput" [137199.216] (II) config/udev: removing device Rockbox.org Rockbox media player Mouse [137199.216] (II) UnloadModule: "libinput" [138081.419] (II) config/udev: removing device Power Button [138081.420] (II) UnloadModule: "libinput" [138081.420] (II) config/udev: Adding input device Power Button (/dev/input/event1) [138081.420] (**) Power Button: Applying InputClass "libinput keyboard catchall" [138081.420] (**) Power Button: Applying InputClass "system-keyboard" [138081.420] (II) Using input driver 'libinput' for 'Power Button' [138081.420] (**) Power Button: always reports core events [138081.420] (**) Option "Device" "/dev/input/event1" [138081.420] (II) event1 - Power Button: is tagged by udev as: Keyboard [138081.420] (II) event1 - Power Button: device is a keyboard [138081.420] (II) event1 - Power Button: device removed [138081.420] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [138081.420] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [138081.420] (**) Option "xkb_layout" "us" [138081.420] (WW) Option "xkb_variant" requires a string value [138081.424] (II) config/udev: removing device Video Bus [138081.424] (II) UnloadModule: "libinput" [138081.425] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [138081.425] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [138081.425] (**) Video Bus: Applying InputClass "system-keyboard" [138081.425] (II) Using input driver 'libinput' for 'Video Bus' [138081.425] (**) Video Bus: always reports core events [138081.425] (**) Option "Device" "/dev/input/event2" [138081.427] (II) event2 - Video Bus: is tagged by udev as: Keyboard [138081.427] (II) event2 - Video Bus: device is a keyboard [138081.427] (II) event2 - Video Bus: device removed [138081.427] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2/event2" [138081.427] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [138081.427] (**) Option "xkb_layout" "us" [138081.427] (WW) Option "xkb_variant" requires a string value [138081.429] (II) config/udev: removing device Power Button [138081.429] (II) UnloadModule: "libinput" [138081.430] (II) config/udev: Adding input device Power Button (/dev/input/event0) [138081.430] (**) Power Button: Applying InputClass "libinput keyboard catchall" [138081.430] (**) Power Button: Applying InputClass "system-keyboard" [138081.430] (II) Using input driver 'libinput' for 'Power Button' [138081.430] (**) Power Button: always reports core events [138081.430] (**) Option "Device" "/dev/input/event0" [138081.430] (II) event0 - Power Button: is tagged by udev as: Keyboard [138081.430] (II) event0 - Power Button: device is a keyboard [138081.430] (II) event0 - Power Button: device removed [138081.430] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [138081.430] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [138081.430] (**) Option "xkb_layout" "us" [138081.430] (WW) Option "xkb_variant" requires a string value [138081.446] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event19) [138081.446] (II) No input driver specified, ignoring this device. [138081.446] (II) This device may have been added with another device file. [138081.447] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event21) [138081.447] (II) No input driver specified, ignoring this device. [138081.447] (II) This device may have been added with another device file. [138081.447] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16) [138081.447] (II) No input driver specified, ignoring this device. [138081.447] (II) This device may have been added with another device file. [138081.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event20) [138081.448] (II) No input driver specified, ignoring this device. [138081.448] (II) This device may have been added with another device file. [138081.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event18) [138081.448] (II) No input driver specified, ignoring this device. [138081.448] (II) This device may have been added with another device file. [138081.448] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event17) [138081.448] (II) No input driver specified, ignoring this device. [138081.448] (II) This device may have been added with another device file. [138081.451] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event15) [138081.451] (II) No input driver specified, ignoring this device. [138081.451] (II) This device may have been added with another device file. [138081.452] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event14) [138081.452] (II) No input driver specified, ignoring this device. [138081.452] (II) This device may have been added with another device file. [138081.455] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [138081.455] (II) No input driver specified, ignoring this device. [138081.455] (II) This device may have been added with another device file. [138081.455] (II) config/udev: removing device OBINS OBINS AnnePro2 [138081.455] (II) UnloadModule: "libinput" [138081.456] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [138081.456] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [138081.456] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [138081.456] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [138081.456] (**) OBINS OBINS AnnePro2: always reports core events [138081.456] (**) Option "Device" "/dev/input/event4" [138081.467] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [138081.471] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [138081.478] (II) event4 - OBINS OBINS AnnePro2: device removed [138081.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.0007/input/input14/event4" [138081.478] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 9) [138081.478] (**) Option "xkb_layout" "us" [138081.478] (WW) Option "xkb_variant" requires a string value [138081.479] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [138081.479] (II) No input driver specified, ignoring this device. [138081.479] (II) This device may have been added with another device file. [138081.479] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [138081.479] (II) UnloadModule: "libinput" [138081.479] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [138081.479] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [138081.479] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [138081.479] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [138081.479] (**) Option "Device" "/dev/input/event8" [138081.490] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [138081.491] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [138081.491] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [138081.491] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.491] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.491] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.491] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input18/event8" [138081.491] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 12) [138081.491] (**) Option "AccelerationScheme" "none" [138081.491] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [138081.491] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [138081.491] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [138081.491] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13) [138081.491] (II) No input driver specified, ignoring this device. [138081.491] (II) This device may have been added with another device file. [138081.491] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [138081.491] (II) UnloadModule: "libinput" [138081.492] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [138081.492] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [138081.492] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [138081.492] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [138081.492] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [138081.492] (**) Option "Device" "/dev/input/event6" [138081.493] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [138081.493] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [138081.493] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [138081.493] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input16/event6" [138081.493] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 10) [138081.493] (**) Option "xkb_layout" "us" [138081.493] (WW) Option "xkb_variant" requires a string value [138081.493] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [138081.493] (II) UnloadModule: "libinput" [138081.493] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [138081.493] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [138081.493] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [138081.493] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [138081.493] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [138081.493] (**) Option "Device" "/dev/input/event7" [138081.494] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [138081.494] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [138081.494] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [138081.494] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0009/input/input17/event7" [138081.494] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 11) [138081.494] (**) Option "xkb_layout" "us" [138081.494] (WW) Option "xkb_variant" requires a string value [138081.495] (II) config/udev: removing device Asus WMI hotkeys [138081.495] (II) UnloadModule: "libinput" [138081.495] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event12) [138081.495] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall" [138081.495] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard" [138081.495] (II) Using input driver 'libinput' for 'Asus WMI hotkeys' [138081.495] (**) Asus WMI hotkeys: always reports core events [138081.495] (**) Option "Device" "/dev/input/event12" [138081.495] (II) event12 - Asus WMI hotkeys: is tagged by udev as: Keyboard [138081.495] (II) event12 - Asus WMI hotkeys: device is a keyboard [138081.495] (II) event12 - Asus WMI hotkeys: device removed [138081.495] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input31/event12" [138081.495] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14) [138081.495] (**) Option "xkb_layout" "us" [138081.495] (WW) Option "xkb_variant" requires a string value [138081.495] (II) config/udev: removing device Eee PC WMI hotkeys [138081.495] (II) UnloadModule: "libinput" [138081.496] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11) [138081.496] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall" [138081.496] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard" [138081.496] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys' [138081.496] (**) Eee PC WMI hotkeys: always reports core events [138081.496] (**) Option "Device" "/dev/input/event11" [138081.496] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [138081.496] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [138081.496] (II) event11 - Eee PC WMI hotkeys: device removed [138081.496] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input24/event11" [138081.496] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15) [138081.496] (**) Option "xkb_layout" "us" [138081.496] (WW) Option "xkb_variant" requires a string value [138081.496] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event25) [138081.496] (II) No input driver specified, ignoring this device. [138081.496] (II) This device may have been added with another device file. [138081.496] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event24) [138081.496] (II) No input driver specified, ignoring this device. [138081.496] (II) This device may have been added with another device file. [138081.497] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/mouse0) [138081.497] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [138081.497] (II) No input driver specified, ignoring this device. [138081.497] (II) This device may have been added with another device file. [138081.497] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event22) [138081.497] (II) No input driver specified, ignoring this device. [138081.497] (II) This device may have been added with another device file. [138081.497] (II) config/udev: removing device Logitech MX Master 2S [138081.497] (II) UnloadModule: "libinput" [138081.497] (II) config/udev: removing device Logitech MX Master 2S [138081.497] (II) UnloadModule: "libinput" [138081.498] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/event3) [138081.498] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [138081.498] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [138081.498] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [138081.498] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [138081.498] (**) Logitech MX Master 2S: always reports core events [138081.498] (**) Option "Device" "/dev/input/event3" [138081.498] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [138081.498] (II) event3 - Logitech MX Master 2S: device is a pointer [138081.498] (II) event3 - Logitech MX Master 2S: device is a keyboard [138081.499] (II) event3 - Logitech MX Master 2S: device removed [138081.499] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.499] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.499] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.499] (II) libinput: Logitech MX Master 2S: needs a virtual subdevice [138081.499] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [138081.499] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: MOUSE, id 13) [138081.499] (**) Option "AccelerationScheme" "none" [138081.499] (**) Logitech MX Master 2S: (accel) selected scheme none/0 [138081.499] (**) Logitech MX Master 2S: (accel) acceleration factor: 2.000 [138081.499] (**) Logitech MX Master 2S: (accel) acceleration threshold: 4 [138081.499] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [138081.499] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [138081.499] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [138081.499] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [138081.499] (**) Logitech MX Master 2S: always reports core events [138081.499] (**) Option "Device" "/dev/input/event3" [138081.499] (II) libinput: Logitech MX Master 2S: is a virtual subdevice [138081.499] (EE) libinput: Logitech MX Master 2S: Parent device not available [138081.500] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [138081.500] (II) event3 - Logitech MX Master 2S: device is a pointer [138081.500] (II) event3 - Logitech MX Master 2S: device is a keyboard [138081.500] (II) event3 - Logitech MX Master 2S: device removed [138081.500] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.500] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.500] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [138081.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [138081.500] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: KEYBOARD, id 16) [138081.500] (**) Option "xkb_layout" "us" [138081.500] (WW) Option "xkb_variant" requires a string value [138081.500] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event26) [138081.500] (II) No input driver specified, ignoring this device. [138081.500] (II) This device may have been added with another device file. [138081.500] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event23) [138081.500] (II) No input driver specified, ignoring this device. [138081.500] (II) This device may have been added with another device file. [138081.501] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [138081.501] (II) No input driver specified, ignoring this device. [138081.501] (II) This device may have been added with another device file. [138081.501] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [138081.501] (II) No input driver specified, ignoring this device. [138081.501] (II) This device may have been added with another device file. [138081.501] (II) config/udev: Adding input device PC Speaker (/dev/input/event10) [138081.501] (II) No input driver specified, ignoring this device. [138081.501] (II) This device may have been added with another device file. [162933.593] (II) config/udev: removing device OBINS OBINS AnnePro2 [162933.594] (II) UnloadModule: "libinput" [162933.707] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [162933.707] (II) UnloadModule: "libinput" [162933.746] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [162933.746] (II) UnloadModule: "libinput" [162933.763] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [162933.763] (II) UnloadModule: "libinput" [167538.428] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [167538.428] (II) No input driver specified, ignoring this device. [167538.428] (II) This device may have been added with another device file. [167538.429] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [167538.429] (II) No input driver specified, ignoring this device. [167538.429] (II) This device may have been added with another device file. [167538.445] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [167538.445] (II) No input driver specified, ignoring this device. [167538.445] (II) This device may have been added with another device file. [167538.446] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [167538.446] (II) No input driver specified, ignoring this device. [167538.446] (II) This device may have been added with another device file. [167538.446] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [167538.446] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [167538.446] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [167538.446] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [167538.446] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [167538.446] (**) Option "Device" "/dev/input/event6" [167538.461] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [167538.461] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [167538.461] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [167538.461] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0020/input/input73/event6" [167538.461] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 9) [167538.461] (**) Option "xkb_layout" "us" [167538.461] (WW) Option "xkb_variant" requires a string value [167538.462] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [167538.462] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [167538.462] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [167538.462] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [167538.462] (**) Option "Device" "/dev/input/event8" [167538.463] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [167538.463] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [167538.463] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [167538.463] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [167538.463] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [167538.463] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [167538.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0020/input/input75/event8" [167538.463] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 10) [167538.463] (**) Option "AccelerationScheme" "none" [167538.463] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [167538.463] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [167538.463] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [167538.464] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [167538.464] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [167538.464] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [167538.464] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [167538.464] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [167538.464] (**) Option "Device" "/dev/input/event7" [167538.464] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [167538.464] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [167538.464] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [167538.465] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0020/input/input74/event7" [167538.465] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 11) [167538.465] (**) Option "xkb_layout" "us" [167538.465] (WW) Option "xkb_variant" requires a string value [167538.465] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [167538.465] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [167538.465] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [167538.465] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [167538.465] (**) OBINS OBINS AnnePro2: always reports core events [167538.465] (**) Option "Device" "/dev/input/event4" [167538.466] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [167538.466] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [167538.466] (II) event4 - OBINS OBINS AnnePro2: device removed [167538.466] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.001E/input/input71/event4" [167538.466] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 12) [167538.466] (**) Option "xkb_layout" "us" [167538.466] (WW) Option "xkb_variant" requires a string value [204416.177] (II) config/udev: removing device OBINS OBINS AnnePro2 [204416.177] (II) UnloadModule: "libinput" [204416.285] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [204416.285] (II) UnloadModule: "libinput" [204416.335] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [204416.335] (II) UnloadModule: "libinput" [204416.348] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [204416.348] (II) UnloadModule: "libinput" [204424.541] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [204424.541] (II) No input driver specified, ignoring this device. [204424.541] (II) This device may have been added with another device file. [204424.542] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [204424.542] (II) No input driver specified, ignoring this device. [204424.542] (II) This device may have been added with another device file. [204424.547] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [204424.547] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [204424.547] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [204424.547] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [204424.547] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [204424.547] (**) Option "Device" "/dev/input/event6" [204424.554] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [204424.554] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [204424.554] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [204424.555] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0024/input/input79/event6" [204424.555] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 9) [204424.555] (**) Option "xkb_layout" "us" [204424.555] (WW) Option "xkb_variant" requires a string value [204424.555] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [204424.555] (II) No input driver specified, ignoring this device. [204424.555] (II) This device may have been added with another device file. [204424.556] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [204424.556] (II) No input driver specified, ignoring this device. [204424.556] (II) This device may have been added with another device file. [204424.556] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [204424.556] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [204424.556] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [204424.556] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [204424.556] (**) OBINS OBINS AnnePro2: always reports core events [204424.556] (**) Option "Device" "/dev/input/event4" [204424.557] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [204424.557] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [204424.557] (II) event4 - OBINS OBINS AnnePro2: device removed [204424.557] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.0022/input/input77/event4" [204424.557] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 10) [204424.557] (**) Option "xkb_layout" "us" [204424.557] (WW) Option "xkb_variant" requires a string value [204424.558] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [204424.558] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [204424.558] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [204424.558] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [204424.558] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [204424.558] (**) Option "Device" "/dev/input/event7" [204424.559] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [204424.559] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [204424.559] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [204424.559] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0024/input/input80/event7" [204424.559] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 11) [204424.559] (**) Option "xkb_layout" "us" [204424.559] (WW) Option "xkb_variant" requires a string value [204424.560] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [204424.560] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [204424.560] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [204424.560] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [204424.560] (**) Option "Device" "/dev/input/event8" [204424.561] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [204424.561] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [204424.561] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [204424.561] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204424.561] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204424.561] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204424.561] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0024/input/input81/event8" [204424.561] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 12) [204424.561] (**) Option "AccelerationScheme" "none" [204424.561] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [204424.561] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [204424.561] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [204426.445] (II) config/udev: removing device OBINS OBINS AnnePro2 [204426.445] (II) UnloadModule: "libinput" [204426.542] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [204426.542] (II) UnloadModule: "libinput" [204426.592] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [204426.592] (II) UnloadModule: "libinput" [204426.604] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [204426.605] (II) UnloadModule: "libinput" [204442.021] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [204442.021] (II) No input driver specified, ignoring this device. [204442.021] (II) This device may have been added with another device file. [204442.022] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [204442.022] (II) No input driver specified, ignoring this device. [204442.022] (II) This device may have been added with another device file. [204442.036] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [204442.036] (II) No input driver specified, ignoring this device. [204442.036] (II) This device may have been added with another device file. [204442.036] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [204442.036] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [204442.036] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [204442.036] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [204442.036] (**) Option "Device" "/dev/input/event8" [204442.037] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [204442.037] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [204442.037] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [204442.037] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204442.037] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204442.037] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [204442.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0028/input/input87/event8" [204442.037] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 9) [204442.037] (**) Option "AccelerationScheme" "none" [204442.037] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [204442.037] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [204442.037] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [204442.038] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [204442.038] (II) No input driver specified, ignoring this device. [204442.038] (II) This device may have been added with another device file. [204442.038] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [204442.038] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [204442.038] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [204442.038] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [204442.038] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [204442.038] (**) Option "Device" "/dev/input/event6" [204442.057] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [204442.057] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [204442.057] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [204442.057] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0028/input/input85/event6" [204442.057] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 10) [204442.057] (**) Option "xkb_layout" "us" [204442.057] (WW) Option "xkb_variant" requires a string value [204442.058] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [204442.058] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [204442.058] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [204442.058] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [204442.058] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [204442.058] (**) Option "Device" "/dev/input/event7" [204442.059] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [204442.059] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [204442.059] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [204442.059] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.0028/input/input86/event7" [204442.059] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 11) [204442.059] (**) Option "xkb_layout" "us" [204442.059] (WW) Option "xkb_variant" requires a string value [204442.059] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [204442.059] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [204442.059] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [204442.059] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [204442.060] (**) OBINS OBINS AnnePro2: always reports core events [204442.060] (**) Option "Device" "/dev/input/event4" [204442.060] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [204442.060] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [204442.061] (II) event4 - OBINS OBINS AnnePro2: device removed [204442.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.0026/input/input83/event4" [204442.061] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 12) [204442.061] (**) Option "xkb_layout" "us" [204442.061] (WW) Option "xkb_variant" requires a string value [220310.737] (II) config/udev: removing device OBINS OBINS AnnePro2 [220310.737] (II) UnloadModule: "libinput" [220310.812] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [220310.812] (II) UnloadModule: "libinput" [220310.847] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [220310.847] (II) UnloadModule: "libinput" [220310.857] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [220310.857] (II) UnloadModule: "libinput" [220311.928] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [220311.928] (II) No input driver specified, ignoring this device. [220311.928] (II) This device may have been added with another device file. [220311.929] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [220311.929] (II) No input driver specified, ignoring this device. [220311.929] (II) This device may have been added with another device file. [220311.940] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [220311.940] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [220311.940] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [220311.940] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [220311.940] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [220311.940] (**) Option "Device" "/dev/input/event6" [220311.960] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [220311.961] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [220311.961] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [220311.961] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input91/event6" [220311.961] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 9) [220311.961] (**) Option "xkb_layout" "us" [220311.961] (WW) Option "xkb_variant" requires a string value [220311.961] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [220311.961] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [220311.961] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [220311.961] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [220311.961] (**) OBINS OBINS AnnePro2: always reports core events [220311.961] (**) Option "Device" "/dev/input/event4" [220311.962] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [220311.962] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [220311.962] (II) event4 - OBINS OBINS AnnePro2: device removed [220311.962] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.002A/input/input89/event4" [220311.962] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 10) [220311.962] (**) Option "xkb_layout" "us" [220311.962] (WW) Option "xkb_variant" requires a string value [220311.963] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [220311.963] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [220311.963] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [220311.963] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [220311.963] (**) Option "Device" "/dev/input/event8" [220311.964] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [220311.964] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [220311.964] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [220311.964] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [220311.964] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [220311.964] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [220311.964] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input93/event8" [220311.964] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 11) [220311.964] (**) Option "AccelerationScheme" "none" [220311.964] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [220311.964] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [220311.964] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [220311.964] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [220311.964] (II) No input driver specified, ignoring this device. [220311.964] (II) This device may have been added with another device file. [220311.965] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [220311.965] (II) No input driver specified, ignoring this device. [220311.965] (II) This device may have been added with another device file. [220311.965] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [220311.965] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [220311.965] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [220311.966] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [220311.966] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [220311.966] (**) Option "Device" "/dev/input/event7" [220311.967] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [220311.967] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [220311.967] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [220311.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input92/event7" [220311.967] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 12) [220311.967] (**) Option "xkb_layout" "us" [220311.967] (WW) Option "xkb_variant" requires a string value [247242.447] (II) config/udev: removing device Power Button [247242.448] (II) UnloadModule: "libinput" [247242.448] (II) config/udev: Adding input device Power Button (/dev/input/event1) [247242.448] (**) Power Button: Applying InputClass "libinput keyboard catchall" [247242.448] (**) Power Button: Applying InputClass "system-keyboard" [247242.448] (II) Using input driver 'libinput' for 'Power Button' [247242.448] (**) Power Button: always reports core events [247242.448] (**) Option "Device" "/dev/input/event1" [247242.448] (II) event1 - Power Button: is tagged by udev as: Keyboard [247242.448] (II) event1 - Power Button: device is a keyboard [247242.448] (II) event1 - Power Button: device removed [247242.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [247242.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [247242.448] (**) Option "xkb_layout" "us" [247242.448] (WW) Option "xkb_variant" requires a string value [247242.455] (II) config/udev: removing device Video Bus [247242.455] (II) UnloadModule: "libinput" [247242.456] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [247242.456] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [247242.456] (**) Video Bus: Applying InputClass "system-keyboard" [247242.456] (II) Using input driver 'libinput' for 'Video Bus' [247242.456] (**) Video Bus: always reports core events [247242.456] (**) Option "Device" "/dev/input/event2" [247242.456] (II) event2 - Video Bus: is tagged by udev as: Keyboard [247242.457] (II) event2 - Video Bus: device is a keyboard [247242.458] (II) event2 - Video Bus: device removed [247242.458] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2/event2" [247242.458] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [247242.458] (**) Option "xkb_layout" "us" [247242.458] (WW) Option "xkb_variant" requires a string value [247242.460] (II) config/udev: removing device Power Button [247242.460] (II) UnloadModule: "libinput" [247242.460] (II) config/udev: Adding input device Power Button (/dev/input/event0) [247242.460] (**) Power Button: Applying InputClass "libinput keyboard catchall" [247242.460] (**) Power Button: Applying InputClass "system-keyboard" [247242.460] (II) Using input driver 'libinput' for 'Power Button' [247242.460] (**) Power Button: always reports core events [247242.460] (**) Option "Device" "/dev/input/event0" [247242.461] (II) event0 - Power Button: is tagged by udev as: Keyboard [247242.461] (II) event0 - Power Button: device is a keyboard [247242.461] (II) event0 - Power Button: device removed [247242.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [247242.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [247242.462] (**) Option "xkb_layout" "us" [247242.462] (WW) Option "xkb_variant" requires a string value [247242.478] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event17) [247242.478] (II) No input driver specified, ignoring this device. [247242.478] (II) This device may have been added with another device file. [247242.478] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event19) [247242.478] (II) No input driver specified, ignoring this device. [247242.478] (II) This device may have been added with another device file. [247242.480] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event21) [247242.480] (II) No input driver specified, ignoring this device. [247242.480] (II) This device may have been added with another device file. [247242.480] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event18) [247242.480] (II) No input driver specified, ignoring this device. [247242.480] (II) This device may have been added with another device file. [247242.483] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16) [247242.483] (II) No input driver specified, ignoring this device. [247242.483] (II) This device may have been added with another device file. [247242.483] (II) config/udev: removing device OBINS OBINS AnnePro2 Keyboard [247242.483] (II) UnloadModule: "libinput" [247242.484] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Keyboard (/dev/input/event7) [247242.484] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "libinput keyboard catchall" [247242.484] (**) OBINS OBINS AnnePro2 Keyboard: Applying InputClass "system-keyboard" [247242.484] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Keyboard' [247242.484] (**) OBINS OBINS AnnePro2 Keyboard: always reports core events [247242.484] (**) Option "Device" "/dev/input/event7" [247242.500] (II) event7 - OBINS OBINS AnnePro2 Keyboard: is tagged by udev as: Keyboard [247242.502] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device is a keyboard [247242.515] (II) event7 - OBINS OBINS AnnePro2 Keyboard: device removed [247242.515] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input92/event7" [247242.515] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Keyboard" (type: KEYBOARD, id 12) [247242.515] (**) Option "xkb_layout" "us" [247242.515] (WW) Option "xkb_variant" requires a string value [247242.515] (II) config/udev: removing device OBINS OBINS AnnePro2 [247242.515] (II) UnloadModule: "libinput" [247242.516] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event4) [247242.516] (**) OBINS OBINS AnnePro2: Applying InputClass "libinput keyboard catchall" [247242.516] (**) OBINS OBINS AnnePro2: Applying InputClass "system-keyboard" [247242.516] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2' [247242.516] (**) OBINS OBINS AnnePro2: always reports core events [247242.516] (**) Option "Device" "/dev/input/event4" [247242.530] (II) event4 - OBINS OBINS AnnePro2: is tagged by udev as: Keyboard [247242.531] (II) event4 - OBINS OBINS AnnePro2: device is a keyboard [247242.531] (II) event4 - OBINS OBINS AnnePro2: device removed [247242.531] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.0/0003:04D9:A293.002A/input/input89/event4" [247242.531] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2" (type: KEYBOARD, id 10) [247242.531] (**) Option "xkb_layout" "us" [247242.531] (WW) Option "xkb_variant" requires a string value [247242.531] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/mouse1) [247242.531] (II) No input driver specified, ignoring this device. [247242.531] (II) This device may have been added with another device file. [247242.531] (II) config/udev: removing device OBINS OBINS AnnePro2 Mouse [247242.531] (II) UnloadModule: "libinput" [247242.532] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Mouse (/dev/input/event8) [247242.532] (**) OBINS OBINS AnnePro2 Mouse: Applying InputClass "libinput pointer catchall" [247242.532] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Mouse' [247242.532] (**) OBINS OBINS AnnePro2 Mouse: always reports core events [247242.532] (**) Option "Device" "/dev/input/event8" [247242.533] (II) event8 - OBINS OBINS AnnePro2 Mouse: is tagged by udev as: Mouse [247242.533] (II) event8 - OBINS OBINS AnnePro2 Mouse: device is a pointer [247242.533] (II) event8 - OBINS OBINS AnnePro2 Mouse: device removed [247242.533] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.533] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.533] (II) libinput: OBINS OBINS AnnePro2 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input93/event8" [247242.533] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Mouse" (type: MOUSE, id 11) [247242.533] (**) Option "AccelerationScheme" "none" [247242.533] (**) OBINS OBINS AnnePro2 Mouse: (accel) selected scheme none/0 [247242.533] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration factor: 2.000 [247242.533] (**) OBINS OBINS AnnePro2 Mouse: (accel) acceleration threshold: 4 [247242.533] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event20) [247242.533] (II) No input driver specified, ignoring this device. [247242.533] (II) This device may have been added with another device file. [247242.534] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13) [247242.534] (II) No input driver specified, ignoring this device. [247242.534] (II) This device may have been added with another device file. [247242.534] (II) config/udev: removing device Eee PC WMI hotkeys [247242.534] (II) UnloadModule: "libinput" [247242.534] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11) [247242.534] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall" [247242.534] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard" [247242.534] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys' [247242.534] (**) Eee PC WMI hotkeys: always reports core events [247242.534] (**) Option "Device" "/dev/input/event11" [247242.534] (II) event11 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard [247242.534] (II) event11 - Eee PC WMI hotkeys: device is a keyboard [247242.534] (II) event11 - Eee PC WMI hotkeys: device removed [247242.534] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input24/event11" [247242.534] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15) [247242.534] (**) Option "xkb_layout" "us" [247242.534] (WW) Option "xkb_variant" requires a string value [247242.535] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event15) [247242.535] (II) No input driver specified, ignoring this device. [247242.535] (II) This device may have been added with another device file. [247242.535] (II) config/udev: removing device OBINS OBINS AnnePro2 Consumer Control [247242.535] (II) UnloadModule: "libinput" [247242.535] (II) config/udev: Adding input device OBINS OBINS AnnePro2 Consumer Control (/dev/input/event6) [247242.535] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "libinput keyboard catchall" [247242.535] (**) OBINS OBINS AnnePro2 Consumer Control: Applying InputClass "system-keyboard" [247242.535] (II) Using input driver 'libinput' for 'OBINS OBINS AnnePro2 Consumer Control' [247242.535] (**) OBINS OBINS AnnePro2 Consumer Control: always reports core events [247242.535] (**) Option "Device" "/dev/input/event6" [247242.536] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: is tagged by udev as: Keyboard [247242.536] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device is a keyboard [247242.536] (II) event6 - OBINS OBINS AnnePro2 Consumer Control: device removed [247242.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-8/1-8:1.2/0003:04D9:A293.002C/input/input91/event6" [247242.536] (II) XINPUT: Adding extended input device "OBINS OBINS AnnePro2 Consumer Control" (type: KEYBOARD, id 9) [247242.536] (**) Option "xkb_layout" "us" [247242.536] (WW) Option "xkb_variant" requires a string value [247242.536] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event14) [247242.536] (II) No input driver specified, ignoring this device. [247242.536] (II) This device may have been added with another device file. [247242.537] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event22) [247242.537] (II) No input driver specified, ignoring this device. [247242.537] (II) This device may have been added with another device file. [247242.537] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/js0) [247242.537] (II) No input driver specified, ignoring this device. [247242.537] (II) This device may have been added with another device file. [247242.537] (II) config/udev: removing device Asus WMI hotkeys [247242.537] (II) UnloadModule: "libinput" [247242.537] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event12) [247242.537] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall" [247242.537] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard" [247242.537] (II) Using input driver 'libinput' for 'Asus WMI hotkeys' [247242.537] (**) Asus WMI hotkeys: always reports core events [247242.537] (**) Option "Device" "/dev/input/event12" [247242.538] (II) event12 - Asus WMI hotkeys: is tagged by udev as: Keyboard [247242.538] (II) event12 - Asus WMI hotkeys: device is a keyboard [247242.538] (II) event12 - Asus WMI hotkeys: device removed [247242.538] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input31/event12" [247242.538] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14) [247242.538] (**) Option "xkb_layout" "us" [247242.538] (WW) Option "xkb_variant" requires a string value [247242.538] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event25) [247242.538] (II) No input driver specified, ignoring this device. [247242.538] (II) This device may have been added with another device file. [247242.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event10) [247242.538] (II) No input driver specified, ignoring this device. [247242.538] (II) This device may have been added with another device file. [247242.538] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event24) [247242.538] (II) No input driver specified, ignoring this device. [247242.538] (II) This device may have been added with another device file. [247242.538] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event26) [247242.539] (II) No input driver specified, ignoring this device. [247242.539] (II) This device may have been added with another device file. [247242.539] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event23) [247242.539] (II) No input driver specified, ignoring this device. [247242.539] (II) This device may have been added with another device file. [247242.539] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event5) [247242.539] (II) No input driver specified, ignoring this device. [247242.539] (II) This device may have been added with another device file. [247242.540] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/mouse0) [247242.540] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [247242.540] (II) No input driver specified, ignoring this device. [247242.540] (II) This device may have been added with another device file. [247242.540] (II) config/udev: removing device Logitech MX Master 2S [247242.540] (II) UnloadModule: "libinput" [247242.540] (II) config/udev: removing device Logitech MX Master 2S [247242.540] (II) UnloadModule: "libinput" [247242.540] (II) config/udev: Adding input device Logitech MX Master 2S (/dev/input/event3) [247242.540] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [247242.540] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [247242.540] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [247242.540] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [247242.540] (**) Logitech MX Master 2S: always reports core events [247242.540] (**) Option "Device" "/dev/input/event3" [247242.541] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [247242.541] (II) event3 - Logitech MX Master 2S: device is a pointer [247242.541] (II) event3 - Logitech MX Master 2S: device is a keyboard [247242.542] (II) event3 - Logitech MX Master 2S: device removed [247242.542] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.542] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.542] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.542] (II) libinput: Logitech MX Master 2S: needs a virtual subdevice [247242.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [247242.542] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: MOUSE, id 13) [247242.542] (**) Option "AccelerationScheme" "none" [247242.542] (**) Logitech MX Master 2S: (accel) selected scheme none/0 [247242.542] (**) Logitech MX Master 2S: (accel) acceleration factor: 2.000 [247242.542] (**) Logitech MX Master 2S: (accel) acceleration threshold: 4 [247242.542] (**) Logitech MX Master 2S: Applying InputClass "libinput pointer catchall" [247242.542] (**) Logitech MX Master 2S: Applying InputClass "libinput keyboard catchall" [247242.542] (**) Logitech MX Master 2S: Applying InputClass "system-keyboard" [247242.542] (II) Using input driver 'libinput' for 'Logitech MX Master 2S' [247242.542] (**) Logitech MX Master 2S: always reports core events [247242.542] (**) Option "Device" "/dev/input/event3" [247242.542] (II) libinput: Logitech MX Master 2S: is a virtual subdevice [247242.542] (EE) libinput: Logitech MX Master 2S: Parent device not available [247242.543] (II) event3 - Logitech MX Master 2S: is tagged by udev as: Keyboard Mouse [247242.543] (II) event3 - Logitech MX Master 2S: device is a pointer [247242.543] (II) event3 - Logitech MX Master 2S: device is a keyboard [247242.543] (II) event3 - Logitech MX Master 2S: device removed [247242.543] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.543] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.543] (II) libinput: Logitech MX Master 2S: Step value 0 was provided, libinput Fallback acceleration function is used. [247242.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.2/0003:046D:C52B.0004/0003:046D:4069.0005/input/input13/event3" [247242.543] (II) XINPUT: Adding extended input device "Logitech MX Master 2S" (type: KEYBOARD, id 16) [247242.543] (**) Option "xkb_layout" "us" [247242.543] (WW) Option "xkb_variant" requires a string value [247242.544] (II) config/udev: Adding input device OBINS OBINS AnnePro2 (/dev/input/event9) [247242.544] (II) No input driver specified, ignoring this device. [247242.544] (II) This device may have been added with another device file. [294152.191] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/mouse2) [294152.191] (II) No input driver specified, ignoring this device. [294152.191] (II) This device may have been added with another device file. [294152.207] (II) config/udev: Adding input device Rockbox.org Rockbox media player Mouse (/dev/input/event28) [294152.207] (**) Rockbox.org Rockbox media player Mouse: Applying InputClass "libinput pointer catchall" [294152.207] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Mouse' [294152.207] (**) Rockbox.org Rockbox media player Mouse: always reports core events [294152.207] (**) Option "Device" "/dev/input/event28" [294152.208] (II) event28 - Rockbox.org Rockbox media player Mouse: is tagged by udev as: Mouse [294152.208] (II) event28 - Rockbox.org Rockbox media player Mouse: device is a pointer [294152.208] (II) event28 - Rockbox.org Rockbox media player Mouse: device removed [294152.208] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [294152.208] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [294152.208] (II) libinput: Rockbox.org Rockbox media player Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [294152.208] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.002E/input/input96/event28" [294152.208] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Mouse" (type: MOUSE, id 17) [294152.208] (**) Option "AccelerationScheme" "none" [294152.208] (**) Rockbox.org Rockbox media player Mouse: (accel) selected scheme none/0 [294152.208] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration factor: 2.000 [294152.208] (**) Rockbox.org Rockbox media player Mouse: (accel) acceleration threshold: 4 [294152.209] (II) config/udev: Adding input device Rockbox.org Rockbox media player Keyboard (/dev/input/event27) [294152.209] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [294152.209] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [294152.209] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [294152.209] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [294152.209] (**) Option "Device" "/dev/input/event27" [294152.209] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [294152.209] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [294152.210] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [294152.210] (II) libinput: Rockbox.org Rockbox media player Keyboard: needs a virtual subdevice [294152.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.002E/input/input95/event27" [294152.210] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: MOUSE, id 18) [294152.210] (**) Option "AccelerationScheme" "none" [294152.210] (**) Rockbox.org Rockbox media player Keyboard: (accel) selected scheme none/0 [294152.210] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration factor: 2.000 [294152.210] (**) Rockbox.org Rockbox media player Keyboard: (accel) acceleration threshold: 4 [294152.210] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "libinput keyboard catchall" [294152.210] (**) Rockbox.org Rockbox media player Keyboard: Applying InputClass "system-keyboard" [294152.210] (II) Using input driver 'libinput' for 'Rockbox.org Rockbox media player Keyboard' [294152.210] (**) Rockbox.org Rockbox media player Keyboard: always reports core events [294152.210] (**) Option "Device" "/dev/input/event27" [294152.210] (II) libinput: Rockbox.org Rockbox media player Keyboard: is a virtual subdevice [294152.210] (EE) libinput: Rockbox.org Rockbox media player Keyboard: Parent device not available [294152.211] (II) event27 - Rockbox.org Rockbox media player Keyboard: is tagged by udev as: Keyboard [294152.211] (II) event27 - Rockbox.org Rockbox media player Keyboard: device is a keyboard [294152.211] (II) event27 - Rockbox.org Rockbox media player Keyboard: device removed [294152.211] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:0c:00.0/usb1/1-4/1-4:1.1/0003:05AC:1261.002E/input/input95/event27" [294152.211] (II) XINPUT: Adding extended input device "Rockbox.org Rockbox media player Keyboard" (type: KEYBOARD, id 19) [294152.211] (**) Option "xkb_layout" "us" [294152.211] (WW) Option "xkb_variant" requires a string value [297905.401] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [297905.401] (II) UnloadModule: "libinput" [297905.401] (II) config/udev: removing device Rockbox.org Rockbox media player Keyboard [297905.401] (II) UnloadModule: "libinput" [297905.417] (II) config/udev: removing device Rockbox.org Rockbox media player Mouse [297905.417] (II) UnloadModule: "libinput" [334662.633] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/js1) [334662.633] (II) No input driver specified, ignoring this device. [334662.633] (II) This device may have been added with another device file. [334662.655] (II) config/udev: Adding input device 8BitDo Pro 2 Wired Controller (/dev/input/event27) [334662.655] (II) No input driver specified, ignoring this device. [334662.655] (II) This device may have been added with another device file. [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.208] (II) UnloadModule: "libinput" [338455.212] (II) UnloadModule: "libinput" [338455.230] (II) Server terminated successfully (0). Closing log file.