Probe #df893fa78f of Fujitsu LIFEBOOK E554
|
Host
| System |  Ubuntu Budgie 24.04 |
|---|---|
| Arch | x86_64 |
| Kernel | 6.8.0-1006-intel |
| Vendor | Fujitsu » |
| Model | LIFEBOOK E554 » |
| Year | 2014 |
| HWid | B7EDC » |
| Type | notebook |
| DE | Budgie (X11) - LightDM |
Devices (35)
| BUS | ID / Class | Vendor | Device | Type | Driver | Status | |
|---|---|---|---|---|---|---|---|
| PCI | 8086:0416:10cf:17af » / 03-00 |
Intel Corporation | 4th Gen Core Processor Integrated Graphics Controller | graphics card | - | failed | |
| PCI | 8086:0c0c:10cf:17c6 » / 04-03 |
Intel Corporation | Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller | sound | - | failed |  Driver is not found or not configured. The device is supported by kernel versions 3.16 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). |
| PCI | 8086:8c20:10cf:17ff » / 04-03 |
Intel Corporation | 8 Series/C220 Series Chipset High Definition Audio Controller | sound | - | failed | Driver is not found or not configured. The device is supported by kernel versions 3.16 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). |
| PCI | 10ec:8168:10cf:17a2 » / 02-00 |
Realtek Semiconductor Co., Ltd. | RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller | network | - | failed | Driver is not found or not configured. The device is supported by kernel versions 2.6.19 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). Also this device is supported by the following additional drivers: |
| PCI | 8086:08b1:8086:4070 » / 02-80 |
Intel Corporation | Wireless 7260 | network | iwlwifi | works
|
|
| PCI | 8086:8c03:10cf:17c9 » / 01-06-01 |
Intel Corporation | 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] | storage | ahci | works | |
| PCI | 8086:0c04:10cf:17a6 » / 06-00 |
Intel Corporation | Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller | bridge | - | detected | |
| PCI | 8086:8c10:10cf:17d3 » / 06-04 |
Intel Corporation | 8 Series/C220 Series Chipset Family PCI Express Root Port #1 | bridge | pcieport | detected | |
| PCI | 8086:8c16:10cf:17d3 » / 06-04 |
Intel Corporation | 8 Series/C220 Series Chipset Family PCI Express Root Port #4 | bridge | pcieport | detected | |
| PCI | 8086:8c1a:10cf:17d3 » / 06-04 |
Intel Corporation | 8 Series/C220 Series Chipset Family PCI Express Root Port #6 | bridge | pcieport | works | |
| PCI | 8086:8c1e:10cf:17d3 » / 06-04 |
Intel Corporation | 8 Series/C220 Series Chipset Family PCI Express Root Port #8 | bridge | pcieport | detected | |
| PCI | 8086:8c49:10cf:17c7 » / 06-01 |
Intel Corporation | HM86 Express LPC Controller | bridge | - | detected | |
| PCI | 10ec:5227:10cf:187f » / ff-00 |
Realtek Semiconductor Co., Ltd. | RTS5227 PCI Express Card Reader | card reader | - | failed | Driver is not found or not configured. The device is supported by kernel versions 3.14 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). Also this device is supported by the following additional drivers: |
| PCI | 8086:8c3a:10cf:17dd » / 07-80 |
Intel Corporation | 8 Series/C220 Series Chipset Family MEI Controller #1 | communication controller | - | failed | Driver is not found or not configured. The device is supported by kernel versions 3.15 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). |
| PCI | 8086:8c22:10cf:17cf » / 0c-05 |
Intel Corporation | 8 Series/C220 Series Chipset Family SMBus Controller | smbus | - | detected | |
| PCI | 8086:8c31:10cf:17e1 » / 0c-03-30 |
Intel Corporation | 8 Series/C220 Series Chipset Family USB xHCI | usb controller | xhci_pci | detected | |
| USB | 8087:07dc » / e0-01-01 |
Intel Corp. | Bluetooth wireless interface | bluetooth | - | failed
|
Driver is not found or not configured. The device is supported by kernel versions 3.10 and newer. You are probably need to configure system for the device to work properly (modify kernel config, install firmware, etc.). |
| USB | 1d6b:0002 » / 09-00-00 |
Linux Foundation | 2.0 root hub | hub | hub | detected | |
| USB | 1d6b:0003 » / 09-00-00 |
Linux Foundation | 3.0 root hub | hub | hub | detected | |
| USB | 1c4f:0034 » / 03-01-02 |
SiGma Micro | XM102K Optical Wheel Mouse | mouse | usbhid | detected
|
|
| EISA | lcd-monitor-1366x768 » | LCD Monitor 1366x768 | monitor | - | works | ||
| SYS | fujitsu-cp656338-01 [76C] » | Fujitsu | Battery CP656338-01 Li-ion 62.2 Wh | battery | - | works
|
|
| SYS | fujitsu-phoenix-version-1-11-03-27-2017 » | FUJITSU // Phoenix Technologies Ltd. | BIOS Version 1.11 03/27/2017 | bios | - | works | |
| SYS | intel-6-60-3-core-i3-4000m » | Intel | Core i3-4000M CPU @ 2.40GHz | cpu | - | works | |
| SYS | 1321-ram-module-8gb-ddr3-1600-sodimm [AAE] | 1321 | RAM Module 8GB SODIMM DDR3 1600MT/s | memory | - | works | |
| SYS | 1321-ram-module-8gb-ddr3-1600-sodimm [AAE] | 1321 | RAM Module 8GB SODIMM DDR3 1600MT/s | memory | - | works | |
| SYS | fujitsu-fjnb281-f2 » | FUJITSU | Motherboard FJNB281 F2 | motherboard | - | works | |
| PS/2 | ps/2:0001-0001-at-translated-set-2-keyboard » | AT Translated Set 2 keyboard | keyboard | - | detected | ||
| PS/2 | ps/2:elantech-000e-etps-2-touchpad » | Elantech | ETPS/2 Touchpad | touchpad | - | detected | |
| SCSI | hl-dt-st-dvdram-gub0n » | HL-DT-ST | DVDRAM GUB0N | cdrom | ahci, sr | detected | |
| SERIAL | serial-console » | serial console | keyboard | - | detected
|
||
| IDE | kingston-sa400s37480g [3D3] » | KINGSTON | SA400S37480G 480GB SSD | disk | ahci, sd | works
|
Logs (37)
Board
|
Boot
|
CPU
|
|||||||||
Drive
|
Filesystem
|
Graphics
|
|||||||||
Input
|
Kernel
|
Modules
|
|||||||||
Network
|
PCI
|
Processes
|
|||||||||
System
|
USB
|
Wireless
|
|||||||||
Driver is not found or not configured.
The device is supported by kernel versions 3.5 and newer.
You are probably need to configure system for the device to work properly (e.g. modify kernel boot parameters).